Used Cable Winch for sale (5,011)

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.510 - EURO 6, optionally with F805 incl. L436 Fly-Jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Hydrodrive Three steered axles STEERING/LIFT axle Front outriggers approx. 14,000 KG Superstructure: flatbed with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings up to 3500 mm width Start/Stop Rotating beacon 8 x rung pockets 6 x lashing points 6500daN Tool boxes Tow hitch Storage compartments Storage boxes 20 ft container locking Perforated side profile lashing points 2500daN Crane: FASSI F805R.2.7, with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, Fly-Jib L436 with 6 hydraulic extensions, rope winch, cross-type radio remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, swiveling sheave, quick coupling between main boom and Fly Jib and more... TECHNO SERIES!! NEW CRANE model Slewing range endless All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle system with PROLINK (overextension of the knuckle arm up to 10°) Electronic overload protection system with FX800 FASSI stability control FSC-S/2 incl. LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of Pressure range (in bar and %) and 90% + 100% warning on the display Danfoss D900 control unit with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, hydraulically extendable on both sides, outrigger width 10.00m, Outriggers operable by radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Nsdpfxozcr N Us Abyodc Driving position: folded across the direction of travel Note: Pay attention to the on-board voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control unit » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 additional functions with » 2 hose connections / hxp-techno Additional knuckle arm (Jib) L436, 6-fold » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable duct » for Jib mounted for 2 functions Control system for additional function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide when operating with additional knuckle arm (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the Jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (additional support frame) Electrical rotary distributor with 14 » sliding contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Additional cost for Dinitrol application (

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, first registration: 03/2017, loading space length: 18,500 mm, loading space width: 2,530 mm, loading space height: 2,480 mm, total length: 18,500 mm, total width: 2,530 mm, total height: 2,480 mm, suspension: air, tire size: 245/70-R17.5, Year of construction: 2017, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Air suspension - Spare wheel - Drum brakes - Central lubrication system = Notes = Beautiful BROSHUIS 3ABSD-48/1 3-axle low-loader from 2017 with ABS/EBS, permissible total weight: 59,000 kg, vertical load with coupling: 23,000 kg, hydraulic steering on the 2nd and 3rd axles, lift axle on the 1st axle, hydraulic ramps (2-part, length: 310 + 190 cm, width: 91 cm, slope angle 8°, width adjustment), hydraulic lift platform, hydraulic support legs at the rear, electric winch (8,165 kg with 27.4 m steel cable and hook), loading platform height: 92.5 cm, 2 pairs of bolster pocket rows, widening supports, various lashing points and bolster pockets, BPW Eco Plus axles with drum brakes and twin tires at the rear with 245/70-R17.5 tires (tread depth left: 8/7, 5/9, 9/10 mm; tread depth right: 4/9 mm, 9/9, 9/9 mm), 1x spare wheel, unladen weight: 16,049 kg, permissible total weight: 59,000 kg, Belgian registration. = Further Information = Axle configuration Tire size: 245/70-R17.5 Axle brand: BPW Eco-Plus Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 12,000 kg; Tire tread depth left inner: 45%; Tire tread depth left outer: 50%; Tire tread depth right inner: 55%; Tire tread depth right outer: 25% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inner: 55%; Tire tread depth left outer: 30%; Tire tread depth right inner: 55%; Tire tread depth right outer: 55% Rear axle 3: Twin tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inner: 60%; Tire tread depth left outer: 55%; Tire tread depth right inner: 55%; Tire tread depth right outer: 55% Weights Unladen weight: 16,049 kg Njdpfjzcnpksx Abyodc Payload: 42,951 kg GVWR: 59,000 kg Functional Body brand: Brosuis 3ABSD-48/1 Loading platform height: 91 cm Extendable body: Yes Condition Technical condition: very good Optical condition: very good Further information Please contact Arne Honingh for more information.

Condition: used, mileage: 140,000 km, power: 96 kW (130.52 HP), first registration: 01/2020, fuel type: diesel, maximum load weight: 1,000 kg, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,300 mm, loading space width: 2,100 mm, Year of construction: 2020, - Used Truck: Ford Transit 350, Twin-Wheel configuration with Three-Sided Tipper Body - Registration: 01.2020, Engine: 2.0 TDCi 130 hp Euro 6d, 6-speed gearbox, Mileage: 140,000 km. - Gross Vehicle Weight: 35 tons, Payload: 10 tons, Twin rear wheels, Leaf spring reinforcement kit. - Equipment: Cantoni three-sided tipper body, External dimensions: 3,300 x 2,100 mm, Sideboards height: 400 mm, Lifting mechanism with No. 5 hydraulic cylinders, Front pole carrier with net, Rear pole carrier, No. 2 winch with tensioning cable, Rear light protection net, Spare wheel. - Equipped with: Air conditioning, Radio-Bluetooth, USB and Smartphone holder, Start-Stop system, On-board computer, Central locking, Two keys, Driver airbag. - Bodywork and interior in excellent condition, Mechanics with a 12-month dealer warranty. - Unique Vehicle - One Owner. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales Representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy, opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM - Certified Mileage. - Road test possible by appointment. - Ownership transfer can be arranged on-site. - Customized financing options available. Carlo Mauri Srl disclaims all responsibility for any unintentional discrepancies in the advertisement, which does not constitute any contractual commitment. The prices quoted are exclusive of VAT and ownership transfer fees. Nodpey Sti Asfx Abyodc

Condition: good (used), mileage: 645,517 km, power: 156 kW (212.10 HP), first registration: 01/2016, fuel type: diesel, fuel: diesel, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: AdBlue, Bluetooth, EBS, air conditioning, electric window regulation, electronic stability program (ESP), fog lights, power mirror, soot filter, = Additional Options and Accessories = - EPS (Electronic Power Steering) - Air horn - Particulate filter - Radio/CD player Njdpfxoy Dr Izj Abyjdc - Sunroof - Side door - Toolbox = Further Information = Unladen weight: 4,210 kg Payload: 6,780 kg Gross vehicle weight (GVW): 10,990 kg Technical condition: good Optical condition: good Reference number: 59 Vehicle number: 59 DAF LF 210 FA / Car transporter / Cable winch / Air conditioning / Euro 6 VIN: XLRAEL1500L449755 Suspension: Leaf / Air Transmission: Automatic Air conditioning Engine brake Cruise control Adaptive cruise control Lane keeping assist Emission standard EURO 6 Length: 6.50 m Width: 2.35 m No liability for typographical or printing errors. Subject to change, prior sale, and errors! = Company Information = No liability for typographical or printing errors. Subject to change, prior sale, and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: used, mileage: 105,300 km, power: 96 kW (130.52 HP), first registration: 01/2021, fuel type: diesel, maximum load weight: 1,000 kg, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,300 mm, loading space width: 2,100 mm, Year of construction: 2021, - Used Truck: Ford Transit 350, Twin-wheel configuration with a three-way tipper body - Registration: 01.2021, Engine: 2.0 TDCi 130 hp Euro 6d, 6-speed gearbox, Mileage: 105,000 km. - Gross Vehicle Weight: 35 Quintals, Payload: 10 Quintals, Twin rear wheels, Leaf spring reinforcement kit. - Equipment: Cantoni three-way tipper body, External dimensions: 3,300 x 2,100 mm, Sideboards height: 400 mm, Lifting mechanism with No. 5 hydraulic cylinders, Front pole carrier with net, Rear pole carrier, No. 2 cable winch, Rear light protection net, Spare wheel. - Equipment includes: Air conditioning, Radio-Bluetooth, USB port and smartphone holder, Start-Stop system, On-board computer, Central locking, Two keys, Driver airbag. - Bodywork and interior in excellent condition, Mechanics with a 12-month dealer warranty. - Front tires: NEW, Rear tires: 90% - Unique vehicle - Single owner. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales representatives: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8:30 AM / 12:15 PM - 2:00 PM / 7:00 PM Saturday: 8:30 AM / 12:00 PM - 2:00 PM / 5:00 PM - Certified mileage. - Road test possible by appointment. - Ownership transfer can be arranged on site. - Customized financing options available. Carlo Mauri Srl disclaims any responsibility for any unintentional inaccuracies in the advertisement, which does not constitute any contractual commitment. Prices are quoted excluding VAT and ownership transfer fees. Nsdpfxey Eqdbj Abyjdc

Condition: used, Hydraulic motor/drive for cable winch system. HTS/NCH Ndjdpjzldr Sjfx Abysc Cevoman bvba. Lenskensdijk 5 2200 Herentals Belgium

Condition: new, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,800 mm, loading space width: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, ---- New German vehicle: ABS, ESP * Central locking with FFB * Wide mirrors * Radio with Bluetooth * Cable winch * Trailer coupling * Payload approx. 1,300 kg. Full aluminum platform: * "Sport" body variant, platform arranged at an angle to the driver's cab * Body 4800 x 2100 mm. incl. middle floor + loading ramps * Trailer coupling + connection socket * Side aluminum profile painted in the same color as the chassis * Aluminum frame made from C-profile * Loading floor made from aluminum profiles * Aluminum loading ramps * Trailer coupling 2,500 kg. Trailer load * Storage box for tensioning straps * Light bar carrier painted in the same color as the chassis * Light bar * Optional: LED work lighting integrated into the side of the loading floor * Optional: Trailer type Modello, 550x205, 3500kg, price on request Load securing is also available from us: * Tensioning and lashing straps * Locking bars * High visibility vests * Transport boxes * Edge protection * Storage bags * Wheel stoppers * etc. Financing and leasing possible We manufacture bodies of any size on any chassis. Tarpaulin, GRP sandwich, aluminum. Visit us at: Bodies - Complete vehicles - Trailers - Advice - Financing Ndodpfx Ajtw Nudjbyjc Subject to errors and prior sale, no liability for printing and input errors.

Condition: like new (used), functionality: fully functional, fuel type: electric, overall weight: 2,500 kg, lifting power: 2,400 kg/m, lifting height: 15,200 mm, chain condition: 90 %, Year of construction: 2018, operating hours: 550 h, machine/vehicle number: 50778-840368, Equipment: rubber tracks, The crane is in very good condition, is fully functional, and has approximately 550 operating hours. Equipment details: - Lithium-ion battery - Winch 800kg/1600kg/2400kg with 60m cable - Hook 2.5T-D7 Nedpfx Abj Ab H Hujyedc - Mechanical jib 800kg SWL JIB800GX - Adjustable track width EXT-209/312/424/429 - Remote access via SIM card KIT J-CONNECT - Hydraulic jib JIB800.2H1MX - Radio remote control RC-SPX_B24V - "Non-marking" tracks The load data can be found in the technical data sheet. Inspection possible in Vahrn.

Condition: used, functionality: fully functional, mileage: 796,299 km, Year of construction: 1999, MAN 33464, 6x4 air suspension, reinforced frame bridges, 33 t technical gross weight. With expired technical, Hungarian papers, temporarily withdrawn. In usable condition for its age. Platform: 620 x 250 (built by Schwarzmüller in Germany), with cargo fasteners, reinforced back wall (load carrier). Crane: Palfinger 66000 E (1999) with 6 hydraulic members, 2.5 t winch, accessories. The control block on the crane has been renovated, the crane radio remote control is new: transmitter, receiver, remote control, cables, complete set. 4.3 m /13.5 t; 9.0 m /6.1 t; 16.0m / 3.2t. Ndedsy Ivhaepfx Abysc

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 530 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible Ndsdpfxezz Rpcs Abysc - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 531 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each Nsdpfsz Agv Uex Abysdc - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 532 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. Nodpfxsz Agw Eo Abyodc - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Year of construction: 2018, condition: used, functionality: fully functional, machine/vehicle number: Gießbank 533 MAP40, General Data: - Designed for wall-mounted toilets - Low-pressure casting process with level control - Suitable for multi-part plaster molds - 40 mold stations per unit Ndodpez Ag Rrefx Abyec - A total of 160 mold stations - Mold spacing: 700 mm - Modular operation in units of 10 molds each - Operation with 10, 20, 30, or 40 molds in use per unit is possible - Different casting times per 10-mold section are possible Production Capacity - For currently manufactured "married" toilet models: the upper and lower parts are cast separately -> Two castings result in a complete toilet. 160 castings per casting cycle -> 80 complete toilets per casting cycle. - For models without "marriage": one mold station corresponds to one product -> up to 160 pieces per casting cycle. - Dimensions: Installation area approximately length: 33,800 mm, width: 4,100 mm, height: 4,300 mm. Single-row roller conveyor with a length of approximately 33,000 mm. Four lifting beam systems per unit. Each lifting beam is designed for 10 molds. One extraction trolley per unit. - Casting and slip system: Slip supply DN 100, slip return DN 100, compressed air connection 2 inches for the pressure line, filling via high-level or level tanks, two level tanks per unit, two casting lines per level tank, return of excess slip to the return slip tank, flushing of the slip lines with water and compressed air, four separate flushing systems per unit. - Mold mounting and clamping technology: Steel base frame, four lifting beams with electromechanical cable winch drive, cable breakage and cable slack protection, divisible vertical clamping devices, upper clamping beams with quick-release fasteners, pneumatic clamping hoses. - Demolding and handling: Pneumatic extraction assistance, molds can be clamped and tilted by 90 degrees, mold halves are manually separated, ergonomic transfer of the green part to a roller conveyor, two-hand safety control, quick-change system for different mold mountings, track for existing vacuum lifting system. - Compressed air and low-pressure system: Separate compressed air distribution for each 10 molds, three compressed air circuits (upper clamping beams and core boxes, vertical clamping devices, separation of the green part and mold), individual pressure control via pressure regulators, pressure monitoring of the clamping circuits, acoustic signal in case of insufficient clamping pressure, low-pressure system for stabilizing the green part in the mold and for hose drying after flushing. - Drying, ventilation, and lighting: Fans for drying the parts, diameter approximately 950 mm, LED lighting strips along the unit, active unit sections can be visually marked by the lighting, uniform drying of the plaster molds supports up to two casting cycles per day. - Electrical system and control: Two main switch cabinets, one main switch cabinet controls 20 molds and two lifting beams each, two-hand operation for safety-relevant movements, separate control cabinets on the level tanks and lifting beams. - Advantages: High production flexibility due to the 10-mold division, different products or casting times within one unit are possible, unused conversion components remain on the unit, suitable for different toilet models and production concepts, modular design facilitates partial occupancy and adjusted production quantities, extensive peripherals for casting, flushing, drying, demolding, and transport are available.

Condition: used, mileage: 12 km, power: 132 kW (179.47 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,500 kg, color: other, number of seats: 3, loading space volume: 21.3 m³, loading space length: 4,230 mm, loading space width: 2,310 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, soot filter, traction control, Simple air conditioning, central locking with automatic locking, electrically adjustable exterior mirror on the passenger side, heated exterior mirrors, traffic sign recognition, driver fatigue detection, cruise control, speed limiter, leather steering wheel, heated steering wheel, spare wheel winch, windshield wipers with rain sensor, daytime running lights, fog lights with cornering lights, analog radio + DAB, 7-inch color touchscreen, hands-free system, Apple CarPlay via USB, Android Auto via USB, tire pressure monitoring system, tinted windows, driver airbag, passenger airbag, ABS, dynamic stability control, driver's seat with adjustable backrest and lumbar support, start/stop system, particulate filter, service booklet available, steel rims 6J16ET68, electric power steering, emission standard Euro 6E, 2.0-liter diesel engine B22LUC, 6-speed manual transmission, truck chassis with extended cab, Opel Movano X250 MCA, body color White Icy, wheelbase 4,035 mm, lower storage compartment, alcove with hood, GSR V2.1, starter motor STTD, roof antenna + digital, drive with internal combustion engine, anti-slip control, indirect tire pressure monitoring with localization, exhaust system on the left side, EOBD self-diagnosis, automatic braking in case of collision, standard battery, manually adjustable passenger seat, automatic activation and switching of lighting, standard roof, ceiling light with door operation, cup holder, left-hand drive, manually adjustable driver's seat, standard chassis, private mode, 90-liter fuel tank, reinforced rear suspension with double leaf springs, gray steel rims, 16-inch steel wheels, remote control with central locking, 92 MHz remote control, standard windshield, 6-speed transmission C637, standard headlights, LCD instrument cluster with text display, battery cable preparation, closed single cab, refrigerant R1234yf, front headrests, diesel, country program Poland, driver's armrest, electric control, traffic information, traffic sign and speed limit recognition, generator class 22, engine type B22, 4G telecommunications, brake assistant, heavy payload 16Q, normal fuel consumption optimization, steel suspension, radio controls on the steering wheel, European radio frequency, hubcaps, tires 215/75 R16 116R, improved repairability, standard rearview mirror, interior mirror day/night, halogen lamps, high-frequency remote control with main key, transmission of vehicle data, passenger double seat, driver's seat, voice recognition via smart device, telematics control unit TBM, stop-and-start system, standard front bumper, spare wheel holder, axle ratio 15 x 73, USB ports 1x USB-C + 1x USB-A, continuous side protection strips, preparation for Visio Park 1 with camera, recommended gears, jack, chrome-plated ventilation nozzles, painted radiator grille, seat belt warning indicator, AUX connection/audio package with USB-C, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank; we will be happy to advise you. This offer is non-binding; no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to changes, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. We will also take your old vehicle in part exchange. Retrofitting of: - Trailer couplings, also up to 3500 kg possible - Auxiliary heaters - Screen for reversing camera and/or navigation via mobile phone (Android Au Ndedpfx Abozum Rcoyoc

Condition: used, maximum load weight: 31,100 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2013, Year of construction: 2013, Equipment: ABS, * Faymonville F-S43-1ABA low-loader * First registered: 03-2013 * Hydraulic lift * Hydraulically adjustable double-folding gooseneck * Includes cable winch with remote control * 3rd axle with trailing linkage * SAF axles Ndedezq N N Hopfx Abyec * Air suspension * Drum brakes * Payload: 10,900 kg * Net weight: 31,100 kg * Gross vehicle weight: 42,000 kg * Tires 235 / 75 R 17.5 * More pictures and videos available via WhatsApp * Specifications subject to change without notice; sale subject to prior sale.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, aluminum floor, manual winch Equipment: - 12 tie-down points - Approach angle 11.5° - Spare wheel Net price: €5,621.85 / Gross price: €6,690.00 Article number: IMO227461900.11 Technical data: • Brand: Vezeko • Model: Imola • Vehicle type: Car transporter • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 462 x 194 x 0 cm • External dimensions (LxWxH): 641 x 200 x 100 cm • Loading height of the floor: 60 cm • Permissible total weight: 2,700 kg • Unladen weight: 685 kg • Payload: 2,015 kg Ndodpfszy Dfnsx Abysc • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Freely adjustable bracket for ALKO 901 manual winch • Includes ALKO 901 manual winch with steel cable • Full aluminum floor, with anti-slip coating • 1 adjustable wheel chock • Very stable steel frame welded • Tilting loading platform by means of manual hydraulics + 2 lifting cylinders • Loading platform 394 cm + 68 cm ramp • Side panels color: black • Wheel stop bar / Tie-down points color: red RAL 3020 • Frame completely hot-dip galvanized • Many stable cross members, resulting in high point load capacity • Additional longitudinal struts fully welded • 12 tie-down points inside the loading platform, rubber coated (750kg/each) • Spare wheel mounted under the loading platform • Reverse drive automatic • ALKO inertia coupling and parking brake • ALKO coupling head • Very stable V-drawbar, REINFORCED • 13-pin plug • Reversing lights • Large-sized safety lighting • Swiveling LED rear lights • Integrated rear fog light • Lighting can be swiveled • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any desired modifications! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transport license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, aluminum floor, electric winch Equipment: - Loading angle 11.5° - Spare wheel - 14 lashing eyes Net: €8,025.21 / Gross: €9,550.00 Article number: IMO230502000.21 Technical data: • Brand: Vezeko • Model: Imola • Vehicle type: Car transporter • Vehicle condition: New • Initial registration: without initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 502 x 209 x 0 cm • External dimensions (LxWxH): 670 x 215 x 100 cm • Loading height of the floor: 60 cm • Permissible total weight: 3,000 kg • Unladen weight: 820 kg • Payload: 2,180 kg • Chassis: Low loader (wheels under the body) • Tires: 195/55R10C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Electric winch • Freely adjustable bracket • Handheld remote control with cable • 12V battery under the loading area in the box • Battery is charged via the 13-pin connector from the towing vehicle, provided the socket is fully occupied. • Solid aluminum floor, with anti-slip coating • 1 adjustable wheel chock • Very stable steel frame, welded • Tilting loading area by means of manual hydraulics + 2 lifting cylinders • Loading area 434 cm + 68 cm approach ramp • Side panels color: black • Wheel stop bar / lashing eyes color: red RAL 3020 • Frame completely hot-dip galvanized • Many stable cross members for high point load • Additional longitudinal struts continuously welded • 14 lashing eyes within the loading area, rubber-coated (750kg/each) • Spare wheel mounted under the loading area • Reversing automatic • ALKO overrun device and parking brake • Coupling head ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Swiveling LED taillights • Integrated rear fog light • Lighting swivels • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs declaration possible Nedpfezy Dgfsx Abysdc Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Tilting, aluminum floor, electric winch Equipment: - 14 tie-down points - Spare wheel - Loading angle 13° Net: €8,949.58 / Gross: €10,650.00 Article number: IMO235542000.21 Technical data: • Brand: Vezeko • Model: Imola • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 542 x 209 x 0 cm • External dimensions (LxWxH): 725 x 215 x 100 cm • Loading height of the floor: 66 cm • Permissible total weight: 3,500 kg • Unladen weight: 950 kg • Payload: 2,550 kg • Chassis: Low loader (wheels under the body) • Tires: 195/50R13C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • electric winch • freely adjustable mounting bracket • hand-held remote control with cable • 12V battery under the loading platform in the box • Battery is charged via the 13-pin connector from the towing vehicle, provided that the socket is fully occupied. • Full aluminum floor with anti-slip coating • 1 adjustable wheel chock Nedpfx Abszy Dxusyodc • very stable steel frame welded • tilting loading platform by means of manual hydraulics + 2 lifting cylinders • loading platform 474 cm + 68 cm ramp • Side panels color: black • Wheel stop bar / tie-down points color: red RAL 3020 • Frame completely hot-dip galvanized • many stable cross members for high point load • additional longitudinal struts continuously welded • 14 tie-down points inside the loading platform, rubber-coated (750 kg/piece) • Spare wheel mounted under the loading platform • Reversing automatic • ALKO overrun device and parking brake • Coupling head ALKO • very stable V-drawbar REINFORCED • 13-pin connector • Reversing light • large-sized safety lighting • swiveling LED rear lights • integrated rear fog light • swiveling lighting • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to ask for specific requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Errors, omissions and prior sale are reserved -

Condition: used, mileage: 31,388 km, power: 160 kW (217.54 HP), first registration: 11/1992, overall weight: 12,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: mechanical, emission class: euro2, Year of construction: 1992, Equipment: ABS, all wheel drive, navigation system, M-Benz 1224 4x4 RW2 Fire Engine VIN: 5569873 Vehicle ID: 1151324 ????? ????? ??? ????? ?? ????? Chassis / Components: * Wheelbase: 3,600 mm * Leaf spring suspension * Tires: 10 R 22.5 * Tire tread depth: Front ~90%, Rear ~80% * 1x Diesel tank * Winch, 60 m / 13mm cable * Trailer coupling Cab: * 3-seater * 2x Rotating beacons Body: * Metz RW2 * Crane type: D20SE * Rotzler winch, 60 m * Lighting mast, 6 m * Generator Engine / Transmission: * 11,309 ccm // 218 hp / 160 kW * 5-speed * Differential lock * Power take-off Weights: * Gross vehicle weight: 12,000 kg * Unladen weight: 8,500 kg * Payload: 3,500 kg Other: * German vehicle * Rescue saw (for metal and glass) New inspections / safety checks or weight adjustments are available upon request. We will gladly assist you in obtaining export / transit license plates; furthermore, we can arrange for the transportation of your purchased vehicles within Germany. Contact us! ----We speak the following languages: German, English, and Russian! ----No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. All rights reserved! ----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Ndjdpfx Aezxvg Iebysc Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Day passes / Export license plates We will gladly assist you in obtaining export license plates / short-term license plates. Processing of customs formalities We will gladly assist you in handling customs matters.

Condition: used, functionality: fully functional, Year of construction: 2024, load capacity: 5,000 kg, lifting height: 25,000 mm, fuel type: diesel, mast type: simplex, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift rotatable Mast type: Quattro Technical condition: New Front tires type: Air Front tires Condition: 80 - 100% Rear tires Type: Air Ndedpfxow Eqdqo Abyjc Rear tires Condition: 80 - 100% Description: The vehicle is UVV - checked. A&M pallet fork carrier set including pallet forks 1200mm, pallet fork carrier plate 1500mm and load hook 5t. 3rd valve, 4th valve, heating, STVZO, full cab, CE certificate, 3rd valve 4th valve heating STVZO full cab CE certificate TÜV Dekra approval 20 km/h 45 % limited slip differential on the second axle 2 front swivel LEDs on the cab 2 rear swivel LEDs on the cab Set of additional platforms for outriggers Wheel set18x22.5 TM R4 Camso standard fork carriage plate Remote control with 2 joysticks Automatic alignment of the wheels Kit for driving with upper carriage rotation of 180 degrees Wired reversing camera Three-sided personnel basket 120 x 240 cm, cable winch 4.0 to. to be mounted on the fork carriage. including workman basket and cable winch

Condition: good (used), Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 2,000 kg with pulley -Lifting speed: 5/15/30 m/min Ndsdpfx Asd Dzlmsbyec -Steel cable: Ø 8 mm -Lifting height: approx. 30 m -without operation -Dimensions: 1600/330/H470 mm -Weight: 356 kg

Condition: used, mileage: 318,871 km, power: 320 kW (435.08 HP), first registration: 09/2007, fuel type: diesel, empty load weight: 18,700 kg, maximum load weight: 13,300 kg, overall weight: 32,000 kg, axle configuration: 8x2, brakes: retarder, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: air, number of seats: 2, loading space length: 6,800 mm, loading space width: 2,550 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, cabin, crane, cruise control, immobilizer system, navigation system, onboard computer, power assisted steering, seat heater, soot filter, trailer coupling, * German vehicle * Condition, see photos * Original only 318.871 Km. * Hiab 377 E-6 HiPro loading crane foldable at the rear * FlyJib 70-X4 * Hook height 30 m * Rotzler TC1 cable winch * 26.00 m = 510 kg * 22.20 m = 630 kg Ndsdpfx Abevhpifeyec * 19.00 m = 770 kg * 16.00 m = 1,660 kg * 13.80 m = 1,940 kg * 11.70 m = 2.360 kg * 9.70 m = 2,940 kg * 7.90 m = 3,750 kg * 6.10 m = 5,100 kg * 4.40 m = 7,500 kg * 3.20 m = 10,000 kg * Radio remote control * 5th + 6th control circuit * 4 hydraulic outriggers * Platform body with aluminum loading flaps * Aluminum floor * High bulkhead * DIN lashing eyes * Trailer coupling * Towing capacity: 24,000 kg * Cab with air conditioning * Multifunction steering wheel * Retarder * Cruise control * Telligent manual gearbox with clutch pedal * Hill start assist * Radio CD navigation * Hands-free system * Comfort driver's seat, air suspension * Seat heating * CB radio * Rotating beacons * ABS and ASR * Full air suspension * 1st + 2nd +4th axle steered * 4th axle liftable * Differential lock * Sun visor * Body dimensions: L=6,800 x W=2,550 x H=1,000 mm * Wheelbase: 1,100 + 3,900 + 1,350 mm * GVW: 32,000 kg * Payload: 13,300 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope, stainless steel rope -Stainless steel cable: Crane cable Ø 4 mm type 7x19-4MM -Length: 500 m -Standard: AISI 316 Ndjdpfx Aouyp Amebyoc -Price: complete -other crane ropes also available -Transport dimensions: Ø 300 x 270 mm -Weight: 34.4 kg

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Njdpfxov Si Szs Abyedc Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: like new (used), functionality: fully functional, machine/vehicle number: WMA56EZZ9NM900210, mileage: 22,661 km, power: 346 kW (470.43 HP), first registration: 08/2022, fuel type: diesel, empty load weight: 21,535 kg, maximum load weight: 4,465 kg, overall weight: 26,000 kg, tire size: 385/65 R 22,5 u. 315/80 R 22,5, axle configuration: 6x6, wheelbase: 4,500 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2021, loading space volume: 5 m³, loading space length: 3,800 mm, loading space width: 2,480 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, cable winch, crane, cruise control, differential lock, navigation system, onboard computer, parking heater, soot filter, traction control, trailer coupling, Vehicle number # 30103 Euro 6 D TN cab with 1 berth 6 x 6 all-wheel drive Wheelbase: 4,500 mm Leaf suspension Tyres: 386/65 R 22.5 and 315/80 R 22.5 Flatbed body (internal dimensions): 3,800 x 2,480 x 600 mm (front wall 1,300 mm) 390-litre fuel tank Differential lock Mechanical 8-speed splitter gearbox Air conditioning Parking heater PTO (power take-off) Cruise control Traction control FASSI loading crane F 455 RA 2.26 JIB L 214 Mech. boom extension PL 21 Cable winch type V20 4-way hydraulic outriggers Front stabilizers Air-suspended driver's seat/heated MAN Multimedia System Advanced Navigation system electric windows (2x) Electric exterior mirrors/heated Reversing camera MAN BrakeMatic 3-stage engine brake Fifth wheel coupling AHK Rockinger Duomatic/Standard Diesel particulate filter Sun visor Beacon lights Roof hatch LED daytime running lights Work lights 5 pairs of lashing eyes Njdpfx Abev U Abnsyodc 4x large toolboxes 2x small toolboxes Headlight range adjustment Multifunction steering wheel On-board computer RIO-Box Off-road reduction gear ABS Offroad Hill-holder brake Roller blind left Drum brakes Lease purchase or financing available on request!