Used Berrenberg Ept for sale (196)

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates Hjdpow Sgnkefx Aagenl - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) Hnsdpfx Aajiidm Njgjl - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: new, input voltage: 400 V, Standard Features • Industry 4.0 compatible • Fixed bowl spiral mixer with two motors • Bi-directional bowl rotation • Stainless steel bowl, spiral hook, and central shaft • Stainless steel bowl guard and motor protection cover • Piston to support the bowl guard • Poly-V belt drive system • Automatic water inlet valve • Digital dough temperature measurement • Automatic water volume adjustment in liters • Dough temperature control to the required temperature 130KG DOUGH CONSTANT DOUGH TEMPERATURE REGULATION AND MAINTAINER DOUGH TEMPERATURE REGULATOR INCLUDED IN THE PRICE Hnsdpfex At Scsx Aagol

Condition: ready for operation (used), Omron Adept eCobra 800 industrial robot ID-SN: 595-00114, used, in good condition, 100% fully functional, scope of delivery as per photos. ATTENTION: Please enquire separately for charges for packaging and shipping! Hnsdjx Dw Rropfx Aagel

Condition: ready for operation (used), Step-Tec HVCS230-S-20-1.2/15-3FD-HSK-A63 high-speed spindle Id. 6014.058.A.10e removed from Norte VS500 Speed, the thread on one of the connectors is damaged, see photo, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hjdpfsul Ipnsx Aagenl

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is a nearly new Teknatool Nova Neptune 190 DVR woodturning lathe with a centre distance of 457 mm. The demonstration machine is in its original condition and comes with full warranty. Technical specifications: - Centre height approx. 190 mm - Max. centre distance 457 mm (optionally extendable!) - Spindle thread M33 x 3.5 with ASR (Euro) runout safety groove* - Spindle and tailstock taper: MK2 - Infinitely variable speed (direct drive): 50 – 4,000 rpm - 24-step indexing function on the display - Motor: 1.5 hp (230 V) with forward and reverse operation - Tailstock quill stroke: 100 mm (with scale and handwheel with ball-bearing crank) - Four-prong drive centre, live centre, and double taper MK2 - Tool rest (upper tool rest) approx. 230 mm (with 25.4 mm post) - Faceplate 80 mm with ASR (Euro) runout safety groove* - Assembled machine weight approx. 60 kg Hodpfxsyk Dtzs Aagsnl The machine can be inspected at any time during our business hours. Subject to prior sale! Shipping by freight forwarder: Austria: €70.00 incl. VAT Germany: €80.00 incl. VAT South Tyrol: €100.00 incl. VAT Related terms: Lathe, woodturning lathe, turning machine, turning bench, turning, lathe chisel, woodturning, machine Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, overall weight: 5,200 kg, input current: 95 A, ERNST Neptun EBB 1500 is a deburring machine designed for sheet metal processing, used for cleaning and rounding the edges of parts cut by laser, punching, or flame cutting. This machine enables alternating processing of various materials such as steel sheets, aluminum, galvanized steel, or materials with protective film, thanks to its flexible deburring roller and brush set. Key features of the ERNST Neptun EBB 1500: • Versatility: Processes parts made from different materials without the need for constant abrasive changes. • Functionality: Uses a flexible deburring roller and a set of brushes (steel or flap brushes) for deburring or edge rounding. • Precision: Allows for the achievement of an identical and uniform radius on all edges. • Ideal solution for: Companies working with diverse materials where edge processing after cutting is required. Hjdpfoxmhxxjx Aagonl

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NEG013HE - BAR102757, cooling capacity: 46.09 kW (62.66 HP), type of input current: three-phase, type of cooling: water, overall weight: 427 kg, input voltage: 400 V, pressure: 10 bar, temperature: 7 °C, volume flow: 7.92 m³/h, total width: 676 mm, total length: 1,555 mm, total height: 1,417 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Chiller / Refrigeration Unit – Water / Water-Cooled, Type: Neptune NEG 013HE (R454B) Manufacturer: MTA S.p.A. The Neptune NEG 013N is a water-cooled chiller for indoor installation, supplied without hydraulic circuit (pump, buffer tank), but includes crankcase heater and phase monitoring. An external dry cooler is not included in the offer. Features: - Flow switch on evaporator - Filter on evaporator (supplied loose) - Flow switch on condenser - Condensation control without valves (2-10V signal for external pump) - Filter on condenser (supplied loose) - Closed panel housing Cooling capacity: 46.09 kW Evaporator: Chilled water outlet/inlet temperature: 7 / 12°C Hnedpfx Aow Nq Eujagsl Flow rate: 2.20 l/s (7.92 m³/h) Pressure drop: 15.3 kPa Condenser: Cooling water outlet/inlet temperature: 45 / 40°C Flow rate: 3.13 l/s (11.27 m³/h) Pressure drop: 34.5 kPa Refrigerant: R454B, GWP 467, A2L Refrigerant charge: 5.1 kg Electrical Data: Voltage: 400 V, Frequency: 50 Hz, Phases: 3 Max. Power Consumption: 18.5 kW Max. Current: 32.4 A Starting Current (circuit): 156.9 A Protection Class: IP22 Dimensions: Length: 1555 mm, Width: 676 mm, Height: 1417 mm Weight: 427 kg Chilled water connection: Victaulic 2" Cooling water connection: Victaulic 2" Serial No.: BAR102757 Year of manufacture: 2025 Condition: Excellent visually, technically sound In-stock unit, like new Price: On request in Euros (plus VAT, ex works Nettetal) – 12-month warranty (Technical modifications and interim sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: reconditioned (used), functionality: fully functional, operating pressure: 175 bar, empty load weight: 224 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 140 °C, NILFISK ALTO NEPTUNE 7-63 HOT WATER WASHER NEW HEATING COIL The machine features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. Hnjdpfx Aoyznkgeagol A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 175 bar and up to 1170 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each machine we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply voltage [V]: 400 ~3 phase Pumping capacity [l/h]: 1170 Working pressure [bar]: 175 Max. Heating temperature [°C]: 100-140 Connection power [kW]: 8.3 Detergent tank [l]: 15+10 Hose length [m]: 10 Weight [kg]: 224 EQUIPMENT: NEW HEATING COIL NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Condition: used, Year of construction: 2006, IMA Novimat edge banding machine: Manufacturer: IMA Type: Novimat Concept/I/G/80/650/R3 Year of construction: 2006 Machine no.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Stop fence: Adjustable stop fence 700.080 Slide-in table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application unit: 04.0832 Gluing unit: 04.1570 PU premelter: 283.203 HK tool holder: For high-speed motors Snipping unit: 08.42 Trimming unit: 08.0555 Multiple processing unit: 08.348 Multiple profile scraper unit: 08.516 Hnsdpsrnkw Dsfx Aagol Flat scraper: 08.517 Copy corner buffing unit: 08.604 Buffing unit: 08.617-4 Safety devices: Light barriers, temperature controller, control terminal Additional equipment: Roller conveyor table in front Total machine length: Approx. 11 /16 m Suction device: Included Accessories: Edge magazines: 2 sliding magazines for gluing edges, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Switch cabinet Panel return system (manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, different table lengths Round belt conveyor table Switch cabinet system 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system

Condition: used, Year of construction: 2002, TETRA PAK TBA 21-1000 SQUARE ASEPTIC FILLER YOM 2002 V050 52.000 RUNNING HOURS CAPACITY 7000 CARTONS PER HOUR VERY GOOD CONDITION COMPLETED BY THE TCA88 1000 SQUARE APPLICATOR (SOME PARTS MISSED) DISMANTLED AND STORED IN POLAND, LASK CITY. Hsdox Agmyepfx Aagonl

Condition: used, - Carton erector Pextor Booster - Carton sealer Glupex - Handle applicator Flexrain Mapp VO3 - Transport Fa. Federspiel - Filling machine Rapak 1230 E antiseptic 3 and 5 litres 10 litres should be filled hot Aseptic filling machine for wine Capacity: 3 litres 16 bags/min 5 litres 15 bags/min 10 litres 12 bags/min Running time 5.800.000 cycles Year of construction of the complete line is 2005, currently the line is dismantled but can be inspected. Operation was done with 1 man.   Hjdpfxoxytthj Aagonl

Condition: used, machine/vehicle number: 008266, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Hodpex A Hfiofx Aagsnl Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 25 m/min Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: new, engine output 5 kW saw-blade dia. 300-350 mm Working speed 0-40 m/min Hnedewli Nropfx Aagsl weight ca. 1.300 – 1.800 kg kg

Condition: good (used), Year of construction: 2007, machine/vehicle number: 22428.07, Offer 22252 Technical Data: - Cutting range at 90° round + square: 330 mm - flat: 600 x 320 mm - Mitre adjustable left / right: 30 / 45° - Cutting range at 45° right + left round: 320 mm flat: 350 x 320 mm - Material support height: approx. 920 mm - Saw band dimensions: 4440 x 34 x 1.1 mm - Cutting speed steplessly adjustable: 10 to 100 m/min - Hydraulic lifting – lowering of the saw frame Hnsdown Dy Dspfx Aagjl - Upper lift limitation of the saw frame - Cutting pressure steplessly adjustable: 0 - 10 m/min - Hydraulic material clamping vice - Cooling device - Total drive power: 400 V / 2.2 kW - Required space: approx. W 1400 x H 1400 x D 2400 mm - Weight: approx. 1000 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 24451.19, Offer 25359 Technical Data: - Cutting capacity at 90° (round): 250 mm - Cutting capacity at 90° (flat): 275 x 180 mm - Miter adjustment to the left - Cutting capacity at 45° (round): 200 mm - Cutting capacity at 45° (flat): 190 x 180 mm - Cutting capacity at 30° (flat): 130 x 110 mm - Material support height: approx. 920 mm - Saw band dimensions: 3100 x 27 x 0.9 mm - Infinitely variable cutting speed: 15 to 100 m/min Hjdoxup Rfopfx Aagjnl - Hydraulic lifting and lowering of the saw frame - Upper travel limit of the saw frame - Infinitely adjustable cutting pressure: 0 – 10 m/min - Hydraulic material vice - Micro-spray cooling system - Total drive power: 400 V / 2.2 kW - Required space approx.: W 2400 x H 1600 x D 1800 mm - Weight approx.: 1300 kg - 3 x Roller conveyor, each 1500 mm

Year of construction: 2007, condition: good (used), machine/vehicle number: 10369, Thermal CTP PT-R4300 E: Computer to Plate Recording System: External Drum 2 x SA-L4100 Single Autoloader: Fully Automatic loading of 50 Plates & automatic interleaf removal PST 26 Plate Stacker Bacher Punch 425 for PT-R4000 ADARA TH 85: Cleaning and Gumming unit for chemistry-free thermal CTP Plates Technical Details: Throughput option (plates/h in max. format) : 10 Plates / Hour Light Source: 16-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Resolution : 2,400 - 2,438 - 2,540 dpi Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Hnedpefh Dm Nofx Aagsl Technical data can vary according to job, consumables and possible other factors

Year of construction: 2005, condition: good (used), machine/vehicle number: 756, Thermal CTP PT-R4300 (Computer to Plate) Recording System: External Drum PST 26 Plate Stacker Glunz & Jensen Interplater MP 85: Thermal Plate Processor Technical Details: Throughput option (plates/h in max. format) : 20 Plates / Hour Light Source: 32-channel infrared laser diodes Min. Plate Format : 324 x 370 mm Maks. Plate Format : 830 x 660 mm Hnjdpefh Dmzjfx Aagol Maks. Imaging Format : 830 x 633 mm Plate Thickness : 0,15 - 0,3 mm Machine Dimensions L x W x H : 1,750 x 1,030 x 1,178 mm Technical data can vary according to job, consumables and possible other factors

Condition: used, Year of construction: 2024, New display machine! List price: €32,665,- complete in standard configuration with: Sturdy, torsion-resistant steel frame constructed with welded and bolted assemblies. Louvered top press beam with 6 elements; louvered side press beam with 5 elements. Louvered press beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints. Counterpressure surfaces (side pressure wall and bottom) are 38 mm thick, coated, continuous support plates. Continuous pressing surface with a height of 95 mm at the lower vertical press beam. Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance running nuts with grease reservoir. Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW). The pressing force of the press beams is continuously adjustable via 2 potentiometers and controlled electronically by frequency converters, ensuring absolutely wear-free force control. Pressing force for the horizontal press beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing force for the vertical press beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing and adjustment speed of the press beams with fine positioning, selectable via three-position rotary switch: 5 / 10 / 25 mm/second. Very simple operation using 6 separate push buttons; 8 movement sequences selectable via control system. Freely adjustable pressing time preselection with automatic opening from 0–30 min (switchable to seconds or hours). Working height/feed height: 300 mm. Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm. Weight: approx. 1800 kg net. Dimensions (Length x Width x Height): 3.45 m x 0.95 m x 2.30 m. Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Additional equipment: Hedpfxjuf Hx Ho Aagenl Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speeds of 5 / 10 / 25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for pressing special components. 1 set of machine feet (working height 500 mm). Storage location:

Condition: used, Year of construction: 2011, gearing type: other, first registration: 01/2011, color: orange, mileage: 1,001 km, empty load weight: 750 kg, driver cabin: other, Vehicle location: Bovenden, Superstructure: Roll-off salt spreader approx. 2.5m³ Salt spreader mounted on roll-off frame, 3800mm length to rollers! Hnsdeup Ht Tspfx Aagjl Salt spreader approx. 2.5m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, plate width: 1,200 mm, plate length: 1,600 mm, G&J flexo plate processor, model Concept 405 DW. The machine is in excellent condition, used as backup for production. Max. plate size: 120x160 cm. Powered on and ready for tests. Hsdoyv Agfopfx Aagonl

Year of construction: 2006, condition: ready for operation (used), 2 x Müller Martini Warenkkeber 423 with Robatech Hotmelt Concept B 5/2, year of manufacture 2006 for Müller Martini Tempo saddle stitcher. Hnedpfsxfwvqjx Aagsl Good condition

Condition: excellent (used), DOUBLE-SIDE EDGE BANDER Edges (band in rolls) thickness (Min/Max) mm 0.3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 12 Panels thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Numerical Control ICOS OPEN Feeding speed (adjustable) m/min 6 - 30 Without Transmission bar (Master & Slave system) Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) Pre-milling Unit (vertical joint trimmers) 08.376 (KW 4.5 x2) Free space Glueing Unit (Hot Melt Glue) 04.1570 Band Pressure zone Hodpfjd Rcigsx Aagonl Edge coils supporting unit (reels N°) 2 Snipping (end-cutting) unit 08.42 (KW 0.66 x 2) 0°-25° Fine Trimming unit 08.055 (KW 1 x 2) 0°-30° Multi Function Unit (Profile contour Trimming unit) 08.342 (KW 0.66 x 2) Profile edge scraping unit 08.519 Glue scraping unit 08.50 Spraying Unit (for polishing liquid) Buffing unit 08.612 Free space (to add a Grooving Milling Unit)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in strips / lippings (min/max) mm 0,8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Compact Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) by N.C. 08.376 (Kw 4,5 x 2) Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) 283.1513 + 283.201 Band Pressure zone Edge coils supporting unit (reels N°) 1 Snipping (end-cutting) unit 08.42 (Kw 0,66 x 2) 0°-25° - max 30 m/min, Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-30° Spraying Unit (for sliding liquid) Multi-Profile Copying unit by N.C (fine and contour trimming) 08.348 (KW 0,66 x 2) 4 profiles Profile edge scraping unit 08.516 (4 profiles) Glue scraping unit 08.50 Hedpfx Aajidqphegjnl Spraying Unit (for polishing liquid) Buffing unit 08.612- 2 (Kw 0,25 x 2) Milling grooving unit 08.183 (Kw 3 x 1)

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Electronic Programmer Safety and sound-proof enclosure - OPTIONAL No. 4+4 Vertical columns to support the working units Hjdsifz H Nepfx Aagonl Min. useful working width (mm) 150 (ca.) Max. useful working width (mm) 3100 (ca.) Max. useful working thickness (mm) 180 (ca.) Distance between center-axes of the disappearing dogs (mm) 500 (ca.) Adjustable (min/max) feeding speed (m/min) 8-40 (ca.) No. 8 Working groups (for each machine's side): 1 Jumping Scoring Unit 1 Hogging Unit 1 Jumping Milling Unit 1 Milling-Shaping unit 1 Corners Rounding unit (contour trimming) with 2 vertical motors 1 Belt sanding unit (with abrasive disc) 1 Belt sanding units (with abrasive papers)