Used Airtech-Parker Nitrogen Generator for sale (11,549)

Condition: used, Perkin Elmer Instruments Differential Scanning Calorimeter with Cooling, DSC 8000, N5340524 Kdsdjyluicjpfx Adqjr Model: DSC8000 Type: N5340524 Condition: Used General: Dual-furnace differential scanning calorimeter with power compensation, Perkin Elmer DSC 8000, equipped with Intracooler 2. Enables precise heat flow measurements from approx. –70 °C to 750 °C with high sensitivity and rapid thermal response. General Instrument Specifications DSC Type: Dual furnace design (independent sample and reference furnaces) Measurement Principle: Power compensation Furnace Material: 90% platinum alloy Temperature Sensors: Distributed platinum resistance thermometers Temperature Performance Standard temperature range: approx. –180 °C to 750 °C (with suitable cooling accessories) With Intracooler 2: approx. –70 °C to 750 °C Minimum Temperature (Intracooler 2): approx. –80 °C Heating Rate: 0.01 to 300 °C/min Cooling Rate: 0.01 to 150 °C/min Measurement Performance Dynamic Range: ±800 mW (typical) High sensitivity and fast response due to low-mass furnace design Excellent baseline stability and temperature accuracy Gas and Atmosphere Control Two regulated gas lines with automatic switching Typical purge gases: nitrogen, helium, argon Supports high gas purity (up to 99.999%) Interfaces and Connections USB Ethernet (LAN) Gas inlet connections Connection for cooling unit Power supply connection Accessory ports (e.g., autosampler, high-pressure cell, UV/photocalorimeter module) Temperature calibration interface Technical Data 3.15 AMP T (5 x 20 mm) 250 V 100–240 VAC 50/60 Hz Maximum power consumption 400 VA Accessories Cooling system: PolyScience Intracooler 2 Norgren gas pressure regulator with gauges for external gas supply Autosampler with 96 positions High-pressure DSC cells, UV/photocalorimeter accessories IEC power connection Documentation PolyScience Intracooler 2 Model: N5341746 P10N9E402E Voltage: 240 IP-100 Hz/A/Ph: 50/7.5/1 Refrigerant: 350 g R-404A Note on Item Condition: Without software/PC

Condition: new, Newpower Generator proudly presents its new NWK33 Soundproof Plus series. These generators are equipped with extra sound curtains in the cabins, which guarantee a 15 percent reduction in noise levels compared to the standard series. The generator is new, complete including control system, diesel tank, exhaust batteries, AVR, battery charger, cooling water heater, sockets, FI protection circuit breaker. - Reinforced sound insulation - Extra quiet operation - Network monitoring, network feed-in - Ready for immediate use Kdedpfxovy Awge Adqjr Technical data: Model: NWK33 Soundproof Plus emergency generator Fawde Motor Newpower generator with special sound insulation Motor: Fawde 4DW92-35D, 4 cylinders, water-cooled Generator: Newpower NW/N33 Continuous output: 24 kW / 30 kVA Maximum output: 26.4 kW / 33 kVA Noise level (7m): approx. 62 dB Connection: FI protection circuit breaker, 5-wire cable connection Sockets: 1 400V x5P 63A -,1x 400V 5P 32A -,2x 400V 5P 16A-,2x 230V 2P Schuko -Sockets Frequency: 50 Hz Voltage: 400/230 V RPM: 1500 rpm Control: Comap IL4 AMF8 Dimensions (LxWxH): 2170X930X1450mm Weight: 972 kg Diesel tank: 95 L. (possibility of connection to external tank) 100% load approx. 6.5 l/h 75% load approx. 4.8 /h 50% load approx. 3.4 l/h

Condition: used, This listing is for the Perkin Elmer Sciex Turbo Ion Spray Source The unit is in full working condition and is ready for immediate use What Is the PerkinElmer Sciex Turbo Ion Spray (Turbo V) Source? The Turbo V Ion Source (commonly referred to as Turbo Ion Spray Source) is a highly robust and efficient ionization module for LC‑MS/MS systems, originally developed by PerkinElmer and further advanced by SCIEX. Here's a breakdown of its key features and function: Ionization Modes Electrospray Ionization (ESI): Uses a TurboIonSpray® probe. Kedpfx Asxhfc Rjdqedr High-voltage spray creates charged droplets, while two heated nitrogen gas jets—in an orthogonal configuration—enhance desolvation by intersecting the spray at ~90°, leading to efficient ion generation. Artisan Technology Group Atmospheric Pressure Chemical Ionization (APCI): Employs a different APCI probe. The sample is nebulized, vaporized via a heated ceramic tube, then ionized via a corona discharge near the orifice. Design and Performance Highlights Iconic orthogonal spray design with simplicity and durability. Uniform temperature distribution and optimized curtain gas flow contribute to its high ruggedness and low maintenance needs. Robustness & Productivity The design supports multi-day stability, with studies showing

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: Kodpfezd Ufaex Adqjdr – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Condition: used, This listing is for a Parker SciLog SciPres Pressure Monitor with Pressure Sensors. The unit is in full working condition and is ready for immediate release. This unit is supplied with 2x Scilog Scipress pressure sensors and cables. The Parker SciLog SciPres Pressure Monitor is an advanced monitoring solution tailored for biopharmaceutical applications. Designed to work seamlessly with single-use pressure sensors, this device enables real-time pressure monitoring and comprehensive data documentation, ensuring your processes run smoothly and efficiently. Key Features: Ksdpsxxx Ubsfx Adqodr - Pre-Calibrated Sensors: The SciPres pressure sensors are pre-calibrated for immediate use upon installation, eliminating setup time and ensuring accurate readings right out of the box. - Gamma-Stable Technology: Engineered to withstand gamma radiation sterilization, these sensors are perfect for environments requiring stringent sterilization protocols. - Robust Data Storage: Each sensor is equipped with a dedicated chip that stores crucial calibration and sensor-specific information, supporting traceability and data integrity. - Versatile Size Options: Available in five sizes to accommodate various tubing configurations, including Luer, 3/8" barb, 1/2" barb, 3/4" Tri-Clover, and 1" Tri-Clover Ladish, ensuring compatibility with your existing systems. - Real-Time Monitoring: The SciPres pressure monitor supports up to three pressure sensor inputs simultaneously, displaying transmembrane pressure (TMP) and differential pressure (dP) for comprehensive monitoring. - Max Pressure Watchdog: This safety feature records the maximum pressure detected, along with sensor ID and calibration info, providing critical data for overpressure prevention. - Software Integration: Connect the monitor to a PC using SciDoc software for automated real-time documentation of sensor data, enhancing data management and compliance. - Comprehensive Support: Enjoy extensive customer support to assist with any issues or queries you may encounter. Specifications: - Display: Backlit, user-friendly interface - Outputs: Analog and digital signals - Power Supply: Universal wall adapter included - Calibration Points: Supports multiple calibration configurations Applications: - Ideal for critical biopharmaceutical processes such as filtration, chromatography, reverse osmosis, fermentation, and use with bags and manifolds. The SciLog SciPres Pressure Monitor is your reliable partner for precise pressure management in a variety of settings.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, table width: 1,500 mm, table length: 1,000 mm, ram plate width: 1,500 mm, reverse speed: 10 mm/s, ram plate length: 1,000 mm, travel distance X-axis: 1,200 mm, type of input current: AC, pressing force: 40 t, power: 9 kW (12.24 HP), Equipment: safety light barrier, Spotting Press – Manufacturer Hidrobrasil – 40 t Sliding Table Press – Table 1,500 × 1,000 mm For sale is a hydraulic spotting press from Hidrobrasil with a pressing force of 40 t. The machine is designed as a tool opener/closer and features an extendable table, a rotatable ram, and a large installation height of 1,800 mm. It is particularly suitable for spotting, adjustment, and tryout operations with heated dies. ===== Technical Data + Information: Spotting Press Hidrobrasil – 40 t Sliding Table Press ==== General Information - Manufacturer: Hidrobrasil - Model: Spotting Press - Design: Sliding Table Press / Die Opener-Closer - Pressing force: 40 t - Machine weight: approx. 13 t - Overall height: approx. 3,800 mm ==== Working Area - Maximum open height: 1,800 mm - Ram stroke: 1,500 mm ==== Table and Ram - Table size: 1,500 × 1,000 mm - Ram size: 1,500 × 1,000 mm - Ram rotatable: 180° - T-slots: according to customer specification Kdjdpstwmp Sofx Adqsr ==== Table System - Table extension: 1,200 mm - Table travel speed: 30 mm/s ==== Forces - Pressure adjustment: 10 – 40 t ==== Hydraulics - Oil temperature monitoring with electric air cooling - Hydraulic components: Bosch Rexroth, Parker, Atos - Lubrication: manual ==== Control and Operation - Siemens control system - Monitor: 10" in control cabinet - Pressure adjustment and warning notifications via display - Two-hand operation - Remote maintenance unit (Secomea Ethernet) ==== Safety - Safety components by SICK ==== Equipment - Insulation of the clamping plates (resin insulating plate + ventilation plate) - Custom color design as requested by customer - EU-compliant design ==== Operating Conditions - Maximum ambient temperature: 40 °C ===== Spotting, die adjustment, tool tryout, mould making, toolmaking, tryout operations, adjustment processes, heated dies Spotting press, tool tryout press, sliding table press, die opener, tryout press, tool adjustment press, tool try out press, tryout press, hydraulic press Looking for a hydraulic press tailored to your application? Contact us for a custom quotation. Our hydraulic presses are manufactured in accordance with German machinery directives, as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements as they fully comply with all points of the Brazilian national safety regulation NR 12, which is based on these standards. Our core competencies include custom machine building and automation of presses. We supply tailor-made hydraulic presses at surprisingly competitive prices. The hydraulics in our presses primarily feature components from leading European manufacturers.

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR75 Ricardo Motor Newpower generator generator set Continuous power : 60 kVA / 48 kW Maximum power: 66 kVA / 52 kW Engine: Kofo RIcardo N4105ZDS, 4 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz. Voltage: 400/230 V Kjdpfx Ademdqw Eeqedr including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 2430x1030x1260 mm Weight: approx. 1166kg Diesel tank: 125 L. Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs 100A automatic switch: € 620 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: new, The aggregate is new, complete incl. control, diesel tank, exhaust and batteries. Description Model: NWR44 Ricardo engine newpower generator genset Continuous power: 30,4 kW / 38kVA Maximum power: 33,5 kW / 41,8 kVA Engine : Kofo RIcardo N4100DS-38, 4 cylinders water cooled Connection : Power switch Frequency : 50 Hz. Voltage : 400/230 V incl. mechanical speed control , AVR, battery charger, galvanized sound insulation, cooling water heater, control unit : Comap AMF8, mains power supply Dimensions: 2230x960x1260 mm Weight: approx. 900kg Diesel tank: 102 L. At 100% load : 7,9 L/h At 75% load : 6,3 L/h At 50% load : 4,2 L/h Mains monitoring, mains supply Soundproofed Ready for immediate use. additional costs 63A Automatic transfer switch: € 500 100A automatic changeover switch: € 620 Shipping: - A worldwide transport incl. unloading is possible for an additional charge. - To be able to quote an exact freight price please send us an inquiry with your data and complete address Kjdpfx Adomgaxboqjdr -Deliverable from April

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on the Kjeldahl method. Automatic, to analyse protein nitrogen in raw material samples or processed material for the food industry. Specific methods available. Results comply with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty free user programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. • Sample suction. • 20 user programs. • Pump calibration by end-user. Kdjdpfxsfiliwe Adqsr • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance • Measurement range: from 0,1 to 200 mg of N. • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consumption: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed-door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies, there is the possibility of selling in installments. Price Euro 3.600 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR225 Ricardo Motor Newpower generator generator set Power: 160kW / 200kVA Engine : Kofo RIcardo 6RT80-176DE, 6 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz. Voltage: 400/230 V including mechanical speed control, AVR, battery charger, galvanized soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3480x1030x1260 mm Weight: approx. 2200kg Diesel tank: 310 L At 100% load: 39.7 L/h At 75% load : 29.8 L/h At 50% load : 20.4 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. Net price: €11,960, gross price: €14,232 additional costs 400A automatic switch : € 1400 630A Automatic Switcher : €1650 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address -Available from April The unit is new, complete including controls, diesel tank, exhaust and batteries. Description Model: NWR225 Ricardo Motor Newpower generator generator set Power: 160kW / 200kVA Engine : Kofo RIcardo 6RT80-176DE, 6 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz. Voltage: 400/230 V including mechanical speed control, AVR, battery charger, galvanized soundproofing, cooling water heater, Kdsdjmhfq Uopfx Adqsr Control unit: Comap AMF8, mains feed Dimensions: 3480x1030x1260 mm Weight: approx. 2200kg Diesel tank: 310 L At 100% load: 39.7 L/h At 75% load : 29.8 L/h At 50% load : 20.4 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs 400A automatic switch : € 1400 630A Automatic Switcher : €1650 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address -Available from April

Condition: excellent (used), tank capacity: 600 l, We can offer you an argon, nitrogen, oxygen, carbon dioxide and nitrous oxide tank: O2,N2,CO2,N2O pallet tank Manufacture: AGA CRYO Kedpfx Adevdb A Noqedr Volume: 600 litres; Working pressure: 17,5 bar We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: new, The Newpower Generator proudly presents their new NWK35 Soundproof Plus series. These generator sets are equipped with extra sound curtains in the cabins, which guarantee a 15 percent reduction in noise levels compared to the standard series. The unit is new, complete including control, diesel tank, exhaust batteries, AVR, battery charger, cooling water heater, sockets, FI protection circuit breaker. - Reinforced soundproofing - Extra quiet operation - Grid monitoring, grid feed-in - Ready for immediate use Technical specifications: Model: NWK35 Soundproof Plus emergency generator Fawde Motor Newpower generator set with special soundproofing Engine : Fawde 4DW92-39D, 4 cylinder, water cooled Generator: Newpower NW/N35 Continuous power: 26 kW / 32 kVA Maximum power: 28 kW / 35 kVA Noise level (7m): approx. 62 dB Connection: 1x5P 63A -, 1x5P 32A -, 2x5P 16A-, 2x2P Schuko sockets, FI protection circuit breaker Frequency : 50Hz Kodpomgaw Esfx Adqsdr Voltage: 400/230V RPM : 1500 rpm. Control: Comap IL4 AMF8 Year of construction: 2023 Dimensions (LxWxH): 2170X930X1450mm Weight: 972 kg Diesel tank: 95 L. (possibility to connect to an external tank) 100% load approx. 7.3 l/h 75% load approx. 5.4 /h 50% load approx. 3.6 l/h additional costs 63A automatic switch: € 500 100A automatic switch: € 620 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: excellent (used), EOS P 396 Laser Sintering System Manufacturer: EOS GmbH Type: P 396 Machine Type: Industrial SLS laser sintering system for plastic components Process: Selective Laser Sintering (SLS) For sale is a professional, industrial laser sintering system from EOS GmbH. The system was developed for the additive manufacturing of plastic components using the Selective Laser Sintering process and is suitable for prototyping, small-series production, research and development, as well as industrial production applications. Technical Data Technology: Selective Laser Sintering (SLS) Usable build volume: 340 x 340 x 600 mm Build rate: up to 48 mm/h (material-dependent) Layer thicknesses: 0.06 mm 0.10 mm 0.12 mm 0.15 mm 0.18 mm Laser system: CO₂ laser Laser power: 70 W F-Theta precision optics Scanning speed up to 6 m/s Laser class 1 Voltage: 400 V 3~ / N / PE Frequency: 50 / 60 Hz Rated power: 10 kW Current draw: 16 A Fuse rating: 32 A Supply: Integrated nitrogen generator External nitrogen connection available Compressed air supply required: at least 10 m³/h at 5,000 hPa Software EOS PSW EOS RP Tools EOSTATE Interfaces STL Ethernet Certifications CE NFPA EN 60825-1:2007 Maintenance Condition Current service and maintenance records are available. According to the available service reports, the following work has been carried out, among others: Heating elements replaced Roller belt replaced X-axis and carriage cleaned Laser window and mirrors cleaned Seals replaced Safety circuits checked Docking Station / Powder Supply Docking station with pneumatic conveying system for automated powder supply to the laser sintering system. Manufacturer: HYDAC Cooling GmbH Type: FWKS-G2-001500-W-W-R25-2-IW-UL Electrical data: 230 V ±10 % 1 PH / 50-60 Hz Max. current draw: 8.0 A ICC / SCCR: 10 kA CE / RoHS Additional Equipment Control panel Docking station Pneumatic conveying system 2 x EOS Multibox Capacity per Multibox: approx. 230 liters For storing, collecting, and transporting fresh and used powder. Dimensions and Weight System including control cabinet: approx. 1,840 x 1,175 x 2,100 mm Control panel: approx. 950 x 700 x 1,550 mm Total weight of laser sintering system: approx. 1,400 kg Recommended installation space: at least 4.3 x 3.9 x 3.0 m Areas of Application Additive Manufacturing Rapid Prototyping Small-Series Production Automotive Industry Mechanical Engineering Aerospace Medical Technology Research and Development Scope of Delivery EOS P 396 Laser Sintering System Control panel Docking station 2 x EOS Multibox Available documentation Service reports Accessories and components as shown in the pictures Condition Used Machine from industrial use Optical condition as shown in the pictures Scope of delivery as shown Inspection and testing on site possible and expressly desired after prior appointment. Shipping or freight forwarding possible. Availability: upon agreement. Scope of delivery as shown. Kodpezarg Uofx Adqodr Changes and errors in the technical data as well as prior sale are reserved.

Condition: used, Year of construction: 2012, power: 800 kW (1,087.70 HP), Rotary UPS System – 800 kVA –Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Kdodpjwuyzwofx Adqer Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: used, functionality: fully functional, 2 units available Manufacturer: Airtech Europe Model: ASC0315-1MT301-6 Kedezgf Ikopfx Adqsdr Type: Side channel blower Power: 1.3 kW Voltage: 230/400 V AC, 50 Hz Pressure difference: up to 220 mbar Volumetric flow rate: approx. 100 m³/h Bearings: maintenance-free Cooling: by means of the conveyed medium Drive: Direct motor with integrated overload protection “functionally tested; item comes from the dismantling of equipment from an automotive supplier”

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: MAX 12kW mit CE, laser power: 12,000 W, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, pipe diameter (max.): 550 mm, pipe length (max.): 12,500 mm, working length: 12,500 mm, travel distance X-axis: 12,000 mm, travel distance Y-axis: 14,300 mm, travel distance Z-axis: 560 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.03 mm, input voltage: 380 V, type of input current: three-phase, total length: 32,500 mm, total width: 3,900 mm, total height: 3,750 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, ACME T-Series Tube Laser – Heavy-duty tube laser for the highest demands The ACME T-Series was specifically developed for the processing of large, heavy tubes and profiles. Thanks to its robust machine construction, powerful clamping technology, and high load-bearing capacity, the system is ideal for steel construction, plant engineering, mechanical engineering, and the series production of large components. The combination of high dynamics, extreme stability, and state-of-the-art fiber laser technology enables precise cuts even with large tube diameters and heavy workpieces. Your advantages at a glance ✔ Processing of heavy tubes and profiles with high load capacity ✔ Suitable for round, square, rectangular, and special profiles ✔ High cutting speed with maximum precision ✔ Automatic material feed for efficient production processes ✔ Robust machine construction for low-vibration operation ✔ Intelligent CNC control with easy operation ✔ Reduced non-productive times through automated processes ✔ Perfect for industrial continuous operation Technical highlights Designed for heavy tubes and profiles Kdjdpfozb Uq Sjx Adqor High load-bearing capacity for material handling State-of-the-art fiber laser technology Precise cuts even with large material thicknesses Automatic loading and unloading systems High acceleration values for short cycle times Intelligent nesting and cutting software Optimized for high production volumes Typical application areas The ACME T-Series is the ideal solution for: Steel and hall construction Machine and plant engineering Vehicle construction Agricultural machinery construction Commercial vehicle industry Structural and metal construction Energy and offshore technology Job manufacturing Maximum performance for large tubes Where conventional tube lasers reach their limits, the strength of the ACME T-Series begins. The robust construction enables the economical processing of heavy and large-sized tubes while maintaining the highest cutting quality. The powerful clamping technology ensures that even long and heavy workpieces are guided safely, resulting in consistently high processing accuracy. The system reduces material handling, increases productivity, and sustainably lowers production costs. Why the ACME T-Series? More load capacity. More precision. More productivity. The ACME T-Series was developed for companies that want to process large tube cross-sections and heavy profiles efficiently and economically. With its robust design, modern automation, and high process reliability, it is the ideal solution for industrial tube processing in the heavy-duty sector. Laser Handels und Service GmbH Your partner for tube lasers, flatbed lasers, laser welding technology, spare parts, and service in Germany. Consulting, installation, training, and technical support from a single source.

Condition: new, Year of construction: 2026, machine/vehicle number: E6R91028, fuel type: gas, motor manufacturer: G3516A, Field of application: Construction Empty weight: 12.500 kg Generator capacity: 1.218 kVA Dimensions of cargo space: 50 x 175 x 195 cm Generator: CAT SR4B Frequency: 50 Voltage: 400 Please contact Team DPX for more information Kjdpjzcugcofx Adqodr

Condition: used, Year of construction: 2003, functionality: unexamined, This membrane Nitrogen generator was removed from a factory 3 years ago . By the time it was removed it was functional. after this is stored. Kdsdpfxey R Sg Re Adqjr

Condition: new, Year of construction: 2026, machine/vehicle number: YAP92107, fuel type: diesel, motor manufacturer: Caterpillar 3516B, General information Field of application: Construction Weights Empty weight: 14.470 kg Functional Generator capacity: 2.250 kVA Dimensions of cargo space: 593 x 229 x 237 cm CE mark: yes Other information Kedpfx Asy Ttz Uodqjdr Fuel consumption: 395 Liter per Hour at 90% Load (Prime) Generator: Caterpillar SR5 Frequency: 50 Voltage: 400 Drill equipment: Control Panel Production country: DE Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel

Condition: excellent (used), Year of construction: 2018, operating hours: 2,300 h, functionality: fully functional, machine/vehicle number: KC1811242, turning diameter over cross slide: 325 mm, turning length: 1,285 mm, turning diameter: 570 mm, spindle bore: 80 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 40 rpm, travel distance X-axis: 310 mm, travel distance Z-axis: 1,285 mm, spindle motor power: 7,500 W, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 10 m/min, rotational speed (min.): 1,600 rpm, rotational speed (max.): 40 rpm, total height: 1,700 mm, total length: 3,070 mm, total width: 1,300 mm, quill travel distance: 150 mm, quill diameter: 75 mm, quill stroke: 150 mm, swing diameter over cross slide: 325 mm, turning diameter over bed slide: 570 mm, turning diameter over top slide: 325 mm, type of input current: three-phase, overall weight: 2,560 kg, swing diameter over bed slide: 570 mm, bar passage: 75 mm, chuck outer diameter: 300 mm, swing diameter over top slide: 325 mm, center height: 280 mm, bar diameter (max.): 75 mm, mount diameter: 32 mm, Equipment: documentation/manual, 2018 Dugard Lunan 570MF CNC Lathe – Excellent Condition 📍 Location: Ireland 🔧 Machine Type: CNC Lathe 🛠️ Manufacturer: Dugard 📅 Year of Manufacture: 2018 ⏱️ Machine Hours: Only 2,300 ✅ Condition: Very Good / Fully Functional 💡 Why Choose This Machine? The Dugard Lunan 570MF is a solid, well-built CNC lathe designed for medium to heavy-duty turning applications. With Siemens 828D control, only 2300 working hours, and a complete set of chucks, steadies, and accessories, this machine is ideal for general precision engineering, subcontractors, and educational/training use. It’s well maintained, ready to work, and represents excellent value. Buy a 2018 Dugard Lunan 570MF CNC Lathe in excellent condition. Featuring 570mm swing, Ø80mm spindle bore, 400mm chuck, and 7.5kW power. Available now from Used Machine Tools Ireland. International delivery available. 🧰 Machine Includes: Siemens 828D CNC Control System 320 mm 3-Jaw Chuck 400 mm 4-Jaw Chuck Travelling Steady Fixed Steady Coolant Equipment Tailstock Operator Manuals Selection of Tool Holders & Chuck Jaws 🔹 Technical Specifications Max Swing Diameter Over Bed: Ø570 mm Max Swing Diameter Over Slide: 325 mm Distance Between Centres: 1500 mm Span of X/Z Axis Guide Rails: 420 mm Max Turning Length: 1285 mm Center Height: • To Bed: 280 mm • To Ground: 1170 mm Spindle Bore Diameter: Ø80 mm Bar Capacity: Ø75 mm Spindle End Type: D8 Chuck Size: Ø300 mm or Ø400 mm Spindle Speeds: 3-Speed Manual Ranges: • 40–150 rpm • 130–470 rpm • 450–1600 rpm Taper of Spindle: Metric 90, 1:20 Turret: 4-Position Electric Turret Tool Size: 32 × 32 mm Tailstock: • Quill Diameter: Ø75 mm • Stroke: 150 mm • Taper: MT5 End Bracket: Hand-operated type Screw Model: • X-Axis: FFZD2504-3-P3 • Z-Axis: FFZD4008-5-P3 Rapid Traverse (X/Z): 6 / 10 m/min X-Axis Stroke: 310 mm Minimum Set Unit: 0.001 mm Main Motor Power: 7.5 kW Power of Main Supply: 12.5 kW Net Weight: 2560 kg Dimensions (L×W×H): 3070×1300×1700 mm 💡 Features & Benefits: Robust and versatile CNC lathe ideal for medium to heavy-duty turning High-torque spindle and large bore suitable for tough materials Reliable FANUC control system with user-friendly interface Well maintained and fully serviced – ready to run Ideal for sub-contract machine shops, tool rooms, and general precision engineering Kdedpfowv Sx Rex Adqer 🚚 Delivery Options Available We offer nationwide & International delivery Dugard Lunan 570MF CNC Lathe for sale Used Dugard CNC lathe Ireland 2018 Dugard Lunan CNC lathe CNC lathe Ø570mm swing Large bore CNC lathe used Heavy-duty CNC turning lathe CNC lathe with 80mm spindle bore 4-position turret CNC lathe CNC lathe with tailstock and 12.5kW power supply CNC lathe for shaft turning manual turret CNC lathe industrial CNC lathe for metal turning Notes: *Specifications are given in good faith but not guaranteed*

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 890CD-231300B0-000-1A000, Parker AC-Drive AC890 890CD-231300B0-000-1A000 890CD/2/0003B/n00/A/UK/00/00/00/00/00 Input 320 / 340 Volts DC Kdodpfxswnbuls Adqer Input 4.2 Amps DC Output 208 / 220-240 Volts DC Output 3 / 2.2 Amps DC For more data see image of the nameplate, device is untested.

Condition: like new (used), Year of construction: 1999, operating hours: 68 h, functionality: unexamined, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 3,200 mm, total height: 2,270 mm, fuel: diesel, overall weight: 2,500 kg, continuous power (apparent): 160 kVA, continuous power: 128 kW (174.03 HP), rotational speed (max.): 1,500 rpm, input current: 317 A, input frequency: 50 Hz, Make: Elbe Model: VP160/220 Year of manufacture: 1999 Serial number: 8623 Operating hours (recorded): 68 Capacity (kVA): 160 PRP / 220 STD Capacity (kW): 128 PRP / 176 Engine make: Volvo Penta Engine model: TD710G Fuel: Diesel Alternator make: Mecc Alte Alternator model: ECN37-SD4 Voltage: 230-400 Kdjdpszvapzjfx Adqer Frequency (Hz): 50-60 RPM: 1500-1800 Amperes (A): 317 Dimensions L x W x H (mm): 3200 x 1000 x 2270 Weight (kg) approx.: 2500 Quantity in stock: 1 Manufactured in: Germany Comments: Ex emergency generator set in good condition.

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) Kjdpfeg Iihwox Adqjdr n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: like new (used), Circular dryer S 20, capacity 200 litres, can be inspected in good working condition. Kjdpfey Eqx Ssx Adqjdr

Condition: like new (used), Year of construction: 1995, operating hours: 10 h, functionality: fully functional, overall weight: 285 kg, fuel type: diesel, color: yellow, power: 8 kW (10.88 HP), output current: 44 A, output voltage: 230 V, output frequency: 50 Hz, type of output current: AC, nominal power: 8 kW (10.88 HP), nominal power (apparent): 10 kVA, total length: 1,300 mm, total width: 700 mm, total height: 1,040 mm, motor manufacturer: Kubota, type of cooling: water, Brand: SDMO Model: DR10J Year of manufacture: 1995 Serial number: SGK72367A Operating hours (recorded): 10 Capacity (kVA): 10 Capacity (kW): 8 Engine brand: Kubota Engine model: D662 Fuel: Diesel Alternator brand: Eurogen Alternator model: S1C 112 ZA/2 Voltage: 230 Frequency (Hz): 50 RPM: 3000 Amperes (A): 43.5 Dimensions L x W x H (mm): 1300 x 700 x 1040 Weight (kg) approx.: 285 Quantity in stock: 1 Made in: France Comments: Excellent, almost new condition, running and producing power, ready for immediate use. Kdodpfx Adozvap Ieqsr