Used A. Lindenberg Hydraulic Press for sale (80,555)

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, pressing force: 630 t, table width: 2,500 mm, table length: 1,600 mm, overall weight: 100,000 kg, Equipment: safety light barrier, Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. Dsdpfx Ahov Hp T Uogoci New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T Dodpfx Aszcxn Djhgsci

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Dcedpfxoy Tptae Ahgsi Machine year of manufacture: 1970 Cylinder No.: 6017 Cylinder stroke: approx. 600 mm Operating pressure: 320 bar Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Cylinder diameter: 255 / 370 / 390 mm Overall length with piston rod retracted: approx. 1350 mm Piston rod extension: 70 mm - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg The hydraulic cylinder is used and comes from a warehouse clearance.

Condition: used, Year of construction: 1976, pressure 20 t throat 185 mm stroke 100 mm table surface area 380 x 350 mm dayligth 250 mm table height over floor 840 mm total power requirement 4 kW Dcsdpfjtqqwuox Ahgei weight of the machine ca. 1,3 t

Condition: used, Year of construction: 1982, pressure 40 t distance between columns 695 bzw. 215 mm stroke 100 mm table surface area 650 x 440 mm ram surface 580 x 285 mm dayligth 400 mm total power requirement 15 kW weight of the machine ca. t dimensions of machine L x W x H 1,63 x 1,05 x 2,61 m Dodpfetqqq Rsx Ahgsci - with die cushion - with light bareer make SICK

Condition: new, Year of construction: 2024, functionality: fully functional, TRtech Prime 31100 Press Brake 1 EUR 52,500.00 EUR 52,500.00 Bending Force: 100 ton Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 265 mm Daylight: 490 mm Dcodpfevd Aavjx Ahgji Throat Depth: 410 mm Table Height: 900 Table Width: 110 mm Free Fall Speed: 120 mm/s Pressing Speed: 10 mm/s Return Dpeed: 110 mm/s X Axis Stroke: 750 mm Engine Power: 11 kW Width: 1780 mm Height: 3960 mm Length: 2850 mm App. Weight: 8500 kg Number of Axis: X, R, Z1, Z2, Y1, Y2 Safety Cages with Switch CNC Controlled Hydraulic Dynamic Crowning System Control Unit: STEP Rock 22 Servo Motor Backgauge: X, R, Z1, Z2 Segmented Die Segmented Punch Sliding Front Arms ( T-Slot and stopper ): 2 pieces Payment conditions: BY SWIFT: %40 pre-payment in advance, rest before loading TOTAL EUR 52.500,00 Delivery time: EX-Works OSM Makina, 12 weeks after the reception of order SEAL AND SIGNATURE PROFORMA INVOICE Bill To Frank Pelka Maschinen GmbH Dorfstr. 11 57271 Hilchenbach Germany

Condition: ready for operation (used), Hydraulic Press Machine, Coil Winding Press Machine, Used Equipment Dimensions: 1340 x 1240 x 2740 mm Weight: 640 kg Electrical Specifications: 400V Hydraulic Pressure: 100 bar Dcjdpfju Hkfpjx Ahgei Stroke Length: 180 mm

Condition: used, Press machine, REMS Power-Press XL ACC, used equipment Manufacturer: Rems Type: Power-Press XL ACC Pressing range: Ø 10 – 108 mm (up to 110 mm) Pressing force: 32 kN Motor: 450 W universal motor Power supply: 230 V or 110 V, 50–60 Hz Weight: approx. 5.5 kg Dimensions (H x W x D): 800 x 335 x 230 mm Cable length: 2900 mm Accessories: more than 400 types of REMS pressing jaws, adapters for other manufacturers Additional features: Automatic retraction (Automatic Circuit Control – ACC) Rotatable pressing jaw holder with automatic lock Compatible with pressing jaws from other manufacturers Fast pressing, e.g., Geberit Mapress stainless steel Ø 108 mm connection in 15 seconds Press jaws: 76.1; 88.9; 108 mm Dcedpexlp T Isfx Ahgoi

Condition: new, Heavy duty splicing press for producing long lengths of timber Simple to use Dsdpfepahmhox Ahgoci Top and bottom plates press simultaneously Very quick cycle time 35 tonne capacity hydraulic pack 7.5Kw motor Pneumatically operated head Maximum timber section 75 x 300mm Two hand control unit Manual eccentric side clamping Optional 2m infeed and outfeed tables

Condition: used, functionality: fully functional, Hydraulic straightening press Manufacturer: G + K Year of manufacture: 1992 Max. pressing force: 130 t Table size (bottom): 800 x 500 mm with T-slots Dcsdoza S Daspfx Ahgei Table size (top): 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Weight: 3400 kg Operating voltage: 380 AC, 24 DC Bsbmm Av Esxr Rnaeuodc Control system renewed 5 years ago The machine is equipped with 2 tables, one at the bottom and one at the top, each measuring 800 x 500 mm. A throttle valve is installed on the hydraulic unit for pressure adjustment.

Condition: used, functionality: fully functional, Equipment: documentation/manual, Hydraulic straightening press Manufacturer: G + K Year of manufacture: 1992 Max. pressing force 130 t Table size (bottom) 800 x 500 mm with T-slots Table size (top) 800 x 500 mm with T-slots Installation dimension 1000 mm System pressure 250 bar Bjbmm Av Eoxr Rnaeujdc Electric motor 15 kW Dcsdjza Szrjpfx Ahgoi Weight 3400 kg Operating voltage 380 AC, 24 DC Control system renewed 5 years ago 2 tables (bottom) 800 x 500 mm The hydraulic unit allows for pressure adjustment via a throttle valve, which can be monitored on the pressure gauge. The electrical system was overhauled by Schäger Steuerungsbau.

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t Dcodsx Uru Nspfx Ahgsi dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: good (used), pressure 250 t Dsdpexcblwofx Ahgoci passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Condition: new, Sicmi PSV 70 M - Hydraulic workshop press with a servomechanical handwheel for cylinder adjustment The PSV model is particularly suitable for sheet metal straightening, inserting bushings, or sheet metal inserts. The lowering and raising of the cylinder is controlled by a handwheel with a servomechanism, which allows for adjustment of the cylinder position to within hundredths of a millimeter, thus ensuring absolute precision. The cylinder stroke is 350 mm and exerts a maximum pressure of 270 bar. Since the approach speed of the cylinder is 10 mm/s or less, the operator can operate the electro-hydraulic press with only one hand. The platform is mobile, and its vertical movement is achieved using the main cylinder, which simplifies sheet metal processing and pressing operations. The hydraulic workshop press with a servomechanical handwheel is also available in a version with a transverse cylinder, which allows for transverse movement of the main cylinder using a handwheel. This solution therefore allows you to always work in the center of the cylinder axis, avoiding processes that could damage the hydraulic press. Correct positioning and locking of the cylinder in the desired position is ensured by a specially designed system. The frame of the PSV hydraulic workshop press is made of an extremely rigid, electro-welded steel construction, which has been specially developed to ensure maximum robustness and stability. Optional equipment: System for preventing cylinder rod torsion Support plates Pair of V-shaped prisms Djdszcphbepfx Ahgjci

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition Dcodpfx Aeu D Tz Ujhgji 3 pieces available, price per piece

Condition: used, Hydraulic punching machine, punching frame for use with JOKA HP-S punching units Hydraulic hole punching machine, hydraulic press for punching tools Year of manufacture approx. 1995 Pressure capacity: 5 tons Stroke: 155 mm Stroke length: approx. 20 mm Punching unit width: max. 54 mm Punching unit height: max. 220 mm Die holder: Ø 48 mm Motor power: 1.5 kW Mains connection: 230 volts, 50 Hz - for universal use with JOKA SW 20 or SWD 20 punching units - The outreach of the punching units can be larger and can be pushed back - Stroke activation via electric two-hand operation Dsdpfeltrmuex Ahgeci - Hydraulic unit HAWE, type HCW 4 / 2.5-B 1/400-1 - mounted on a frame base, mobile Space requirement L x W x H: 1100 x 800 x 1450 mm Weight: approx. 200 kg Good condition

Condition: used, Single-column hydraulic press, MAE Type S63SZ SO . 551277, year of manufacture approx. 1977 Nominal pressing force 63 tons. Pressing force: 50 tons (practically tested) Overhang 320 mm Table surface 850 x 630 mm Ram surface 1050 x 500 mm Ram stroke 500 mm Maximum installation height approx. 730 mm Table height above floor 970 mm Hydraulic tank capacity 600 liters Drive power 15 kW Mains connection 380 volts, 50 Hz Dcjdpfx Ahedzp Trsgji - Hydraulic draw cushion under the table with holes through the table top - 2-hand operation - Electrical control cabinet damaged Space requirement L x W x H 2000 x 1200 x 3420 mm Weight approx. 5 tons. The machine is functional, but the control cabinet is mechanically damaged. During a test run, the machine achieves a pressing force of 50 tons; presumably, a pressure relief valve is releasing.

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Djdeyupuljpfx Ahgjci Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control Dsdpfx Ahjwva I Hogsci - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: used, High-performance baler MACFAB - BEMA type 650A Hydraulic press for packaging waste, recyclable renewable raw materials, secondary raw materials Manufacturer no. MF J0162 Year of manufacture 2021 Pressing force 50 tons. Press plate stroke approx. 1000 mm Cycle time per stroke approx. 40 sec. Pressing chamber floor area 1500 x 1100 mm Pressing chamber height 1650 mm Filling opening 1500 x 870 mm Filling height approx. 1250 mm Bale format 1500 x 1100 mm Bale height max. 1100 mm Hydraulic operating pressure 200 bar Motor power 5.5 kW Mains connection 400 volts, 50 Hz, 12 amps. - with two hydraulic cylinders - Door locking via threaded spindle with handwheel - Pressing operation only with the pressing chamber door closed - 2-hand operation for hydraulic tipping of the finished pressed bale - Free space for manual strapping - Standard industrial bales of 1500 x 1100 x 1100 mm are produced Dsdpfevq Rtksx Ahgjci - the highly compressed bale is automatically tipped onto a pallet - only 62 operating hours Space requirement L x W x H 2120 x 1350 x 3220 mm Height for transport with lowered hydraulic cylinders approx. 260 cm Weight 1.8 ton. The machine is in very good condition, as good as new. The press has a new price of EUR 22,200 net at BEMA The BEMA company also buys the packaging waste that you press into bales with this press.

Condition: used, Hydraulic notching machine with adjustable angle SIMASV model AV 220-6PA Serial no.: C1524 Year of manufacture: 1996 Blade length: 220 mm Material thickness (steel): 6 mm Material thickness (stainless steel): 4 mm Table dimensions: 950 x 790 mm Table height: 940 mm Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Operation via push-button or foot switch - Adjustable notching angle from 30° to 140° - Angle adjustment via 2 handwheels (right and left) - Hydraulic clamping for the adjustable blades - Electric foot switch Dedpjrzfh Hefx Ahgeci - 2 adjustable stop rails with angle scale - Multiple millimeter scales integrated into the table top - HSS blades newly ground, as new Required space (L x W x H): 1000 x 950 x 1470 mm Weight: 750 kg Very good condition

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Dodpodzp Tcefx Ahgoci Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: used, Year of construction: 2015, pressure 30 t stroke 300 mm Dcjdpfjy Umbwox Ahgsi daylight between the columns 700 mm dayligth 850 mm 140 mm diameter of piston 60 mm table surface area 700 x 390 mm weight of the machine ca. 0,35 t dimensions of the machine ca. 1,2 x 0,8 x 2,2 m Workshop Press - Movable cylinder - 2 support prisms - Emergency stop device

Condition: excellent (used), Year of construction: 1969, functionality: fully functional, pressing force: 160 t, stroke length: 650 mm, table width: 1,200 mm, table length: 800 mm, working height: 600 mm, Equipment: safety light barrier, Lasco TSP 160S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dcedpfsv E Rd Esx Ahgji Lasco TSP 160S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2019. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: excellent (used), Year of construction: 1962, functionality: fully functional, pressing force: 200 t, stroke length: 800 mm, table width: 970 mm, table length: 1,600 mm, year of last overhaul: 2022, die cushion force: 40 t, Equipment: safety light barrier, Lasco FP 222 S press Dcsdjv E Efdspfx Ahgji A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Lasco FP 222 S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2022. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.