Used +Gf+ Jig for sale (947)

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. In service with a small municipality until 2026, initially with the fire department and then with the municipal depot. This vehicle has a civilian truck registration as a "closed-body truck" and the papers indicate a total of 9 seats. The vehicle was initially used as a multipurpose vehicle (MZF), and later the municipality's lawnmower was transported in it. Only one bench seat is permanently installed. Two of the three bench seats were not needed in recent years and are included as loose items. The seatbelts and mounting screws are also included in their original condition. A folding table with a radio headset is still mounted on the left side, and an original large fire department first-aid kit is integrated into the interior. Engine: OM 602, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and initially runs smoothly, but after approximately 20 seconds of idling, the idling performance deteriorates significantly, and smoke starts to appear. When the engine reaches operating temperature, the smoke decreases, and the engine runs smoothly again, almost normally. The engine is either severely worn or has an engine malfunction. No precise diagnosis has been made yet. The vehicle starts immediately and functions well, and the usual engine power was fully available during a short test drive, but we do not guarantee its drivability. A repair is certainly necessary in the short term! For driving short distances or loading onto a RORO ship in the port heading to Africa, this 310 D appears to function without any problems. 5-speed manual transmission. 127 km/h. Ball-type trailer hitch with a 2000 kg braked or 750 kg unbraked towing capacity. Power steering. Original Mercedes/Eberspächer auxiliary heater (operational). Body with individual rust spots; overall, it is still relatively well-preserved due to being stored in a garage for many years. The window of the passenger door is damaged and covered with a film. The paintwork has been repaired in black around the lower part of the vehicle. Apparently, the car was always very well maintained at the fire department, but unfortunately not afterwards! The running board on the sliding door – which is still visible in the photos – has been removed for use on another vehicle and is no longer present. Unladen weight: 2370 kg. Permissible total weight: 3200 kg. Knjdpfsyx N Hqsx Aamsc Overall vehicle dimensions: Length 5345 mm / Width 1975 mm / Height 2680 mm. The tires (205R14C) are from 2013 and are not porous, with approximately 50-60% tread depth. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unaltered base for restoration. The TÜV (technical inspection) expired in 12/2025 and will not be renewed. We have deliberately kept the purchase price attractive, as comparable vehicles in good condition are now usually sold for twice the price or even higher. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for commercial businesses, freelancers, and emergency services of all kinds. Unfortunately, sales to private end consumers are generally excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT (according to §25a UStG / differential taxation).

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 65352, functionality: fully functional, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 170 mm, number of axes: 3, number of slots in tool magazine: 12, TECHNICAL DETAILS Milling spindle Number of controlled axes: 3 Knsdpfx Aszuwt Ieamsc Tool holder: ISO 30 Motor power: 1.7 kW Drilling unit Drilling tool available: Yes Vertical drilling spindles: 10 pcs. Table and working area Type of milling table: Flat table Table length: 3,750 mm Table width: 1,560 mm Working area X-axis: 3,765 mm Working area Y-axis: 1,585 mm Working area Z-axis: 170 mm Z-axis travel max.: 324 mm Material clamping system: Pneumatic Tool changer and control Number of tool changer positions: 12 pcs. MACHINE DETAILS System/Software: BiesseWorks Vacuum pump Brand: Busch Type: MM1322AVM Capacity: 360 m³/h Connection diameter: 60 mm Oil-free: Yes Dimensions & Weight Dimensions (L x W x H): 5,600 x 2,250 x 2,550 mm Installed length: 6,465 mm Installed width: 4,794 mm Installed height: 2,550 mm Shipping weight: 2,500 kg Shipping packages: 2 pcs. EQUIPMENT Tools included Vacuum pump Busch MM1322AVM Safety mat CE marking

Condition: used, mileage: 148,009 km, power: 152 kW (206.66 HP), first registration: 05/2024, fuel type: diesel, overall weight: 3,500 kg, color: grey, gearing type: automatic, emission class: euro6, loading space length: 4,500 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Color monitor for navigation system, used vehicle * Vehicle No.: - 71 * Euro 6, green environmental badge * New model facelift Daily 35-210 Maxi van with high roof * Cargo area length approx. 4.5m x 1.8m x 1.9m * Automatic climate control * LED headlights * Auxiliary heater * Hi-Matic 8-speed automatic transmission * Tow hitch with 3500kg towing capacity * Rear axle with air suspension, raising and lowering function * Navigation system * Rear view camera * Parking sensors (rear) * Alloy wheels * LED headlights with cleaning system * Lane keeping assist * Multifunctional steering wheel * Cruise control * GVWR 3500 kg * Driver + passenger luxury seat * Partition * Cargo area lining (floor + wall) * Electric windows * Central locking * Airbag * ABS * ASR * German vehicle * Original mileage Knedpfx Aaszxknyjmsc ---- -> Please note that a viewing is only possible after prior appointment. Thank you for your understanding. -> Sale is only to commercial customers or for export. The data, photos, and equipment list listed above serve only for the general identification of the vehicle and do not constitute a guaranteed characteristic in the legal sense! All information / accessory details are provided WITHOUT GUARANTEE. Changes, interim sales, and errors expressly reserved! The equipment list does not form part of the contract and must be checked in detail by each interested party on site before the purchase. Subsequent complaints will not be accepted.

Condition: ready for operation (used), functionality: fully functional, DECKEL FP 2 E milling machine from an educational institution -Travel ranges X / Y / Z 400x200x400mm -Automatic feeds / rapid traverses in the X & Z axis -Spindle speed range 40 - 2000 rpm -Tool holder ISO 40 -Vertical / horizontal milling capability -Swiveling vertical head with drilling quill -Fixed angular table -Machine with sliding head / extended Y-axis travel -New control cabinet -Coolant system -Chip tray -Documentation -Optional / Three-axis digital display Dimensions: L x W x H 1.5 x 1.5 x 1.8 meters / Weight 1500 kg Ksdpezx Rk Isfx Aamsnc Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: 18966, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area, X-axis: 3,309 mm Working area, Y-axis: 1,703 mm Working area, Z-axis: 120 mm Table length: 3,100 mm Table width: 1,500 mm Number of milling spindles: 1 Number of controlled axes: 3 Tool clamping system: HSK-F63 Tool changer positions: 12 MACHINE DETAILS System/Software: BiesseWorks Capacity: 360 m³/h Connection diameter: 70 mm Vacuum: 300 bar Main motor power: 11 kW Power consumption: 24 A Power: 14.2 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,350 x 2,000 mm Empty weight: 1,530 kg Transport packages: 2 Kodpfx Aaszdy S Semonc Vacuum pump Busch MM 1322 A VM8 Year of manufacture: 2012 Main motor power: 6 kW EQUIPMENT CE marking CE certificate Documentation (Electrical diagrams, parts list, technical data, user manual (NL, paper form)) Safety fence, safety light curtain Milling table: Flat table Material clamping system: Pneumatic

Condition: good (used), mileage: 604,680 km, power: 390 kW (530.25 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2019, Equipment: AdBlue, air conditioning, central locking, cruise control, soot filter, spoiler, = Additional Options and Accessories = - Aluminum fuel tank - Work light, rear - Work light, front - Air suspension - Particle filter - Sun visor Knedpfx Aajzhxd Uemsc = Additional Information = Suspension: Air suspension Front axle: Steerable Rear axle 1: Dual tires Number of cylinders: 6 GVWR: 26,000 kg Technical condition: good Visual condition: good

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 12/2015, total length: 8,440 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2015, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes - Hydraulics - PTO = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: Schmitz Brakes: disc brakes Suspension: air suspension Axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Knsdpfezx E Saex Aamjc Axle 2: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Axle 3: Max. axle load: 9000 kg; Tyre profile left: 30%; Tyre profile right: 30% Weights Empty weight: 6.300 kg Carrying capacity: 32.700 kg GVW: 39.000 kg

Condition: used, functionality: fully functional, machine/vehicle number: 62234, Year of construction: 2016, operating hours: 7,305 h, load capacity: 2,500 kg, lifting height: 3,300 mm, fuel type: gas, mast type: duplex, construction height: 2,145 mm, fork length: 1,200 mm, empty load weight: 3,960 kg, total length: 2,650 mm, drive type: Treibgas, construction width: 1,160 mm, LPG forklift Ksdjzwrv Njpfx Aamsnc Chassis number: 62234 Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Normal Front tires type: Pneumatic Front tires size: 7.00-12 Front tires condition: 40 - 60% Rear tires type: Pneumatic Rear tires size: 6.00-9 Rear tires condition: 40 - 60% Description: Machine fully workshop-inspected, cleaned, new safety inspection (UVV) and maintenance performed! Damaged paintwork can be touched up or smoothed upon request. Side shifter, 3rd valve, 4th valve, rear work light, front work light, heater, load guard, full cabin, CE certificate, beacon, seat, - Full cabin with heating - Work lights front and rear - BlueSpot rear - incl. 1,200 mm fork tines!

Condition: excellent (used), mileage: 3,647 km, power: 375 kW (509.86 HP), first registration: 10/2024, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2024, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, fog lights, parking heater, power mirror, soot filter, trailer coupling, = Additional options and equipment = - Brake booster - High beam - Speed limiter - Refrigerator - Air suspension - Particulate filter - Sun visor - Auxiliary heater - Power take-off (PTO) - Central lubrication system - Towing jaw = Further information = Transmission Transmission: I-SHIFT, 12-speed, automatic Axle configuration Brakes: Disc brakes Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered; Suspension: leaf spring Front axle 2: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered; Suspension: leaf spring Rear axle 1: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Suspension: air suspension Rear axle 2: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Suspension: air suspension Weights Unladen weight: 31,780 kg Payload: 12,220 kg Gross vehicle weight (GVW): 41,000 kg Functional Kjdpfx Aeyiunyjamonc Boom: telescopic Boom length: 35 m Lifting capacity: 25,000 kg Lifting height: 3,500 cm Crane: FASSI F1450R.2.8-HXP + JIB L826 + winch, year of manufacture 2025, mounted behind the cab Body manufacturer: FASSI F1450R.2.8-HXP + JIB L826 + winch CE certification: yes Condition Technical condition: very good Visual condition: very good VOLVO FH 500 8X4 WITH FASSI F1450R.2.8-HXP + JIB L826 + WINCH EURO 6 L PACKAGE 500 HP DRIVE 8X4 WHEELBASE 490 CM AIR SUSPENDED FH SLEEPER CAB WITH AIR CONDITIONING AND REFRIGERATOR I-SHIFT AUTOMATIC TRAILER COUPLING TOOLBOXES FASSI F1450R.2.8-HXP + JIB L826 + WINCH 2X OIL COOLER FOR CRANE HYDRAULICS 14X HYDRAULIC EXTENSIONS TOTAL WORKING HEIGHT 35 METERS!!! MAX. LIFTING CAPACITY AT 4.30 M = 25,000 KG MAX. LIFTING CAPACITY AT 31.5 METERS 1,465 KG CRANE CAN OPERATE IN FRONT OF THE CAB DUE TO 2X FRONT STABILIZERS 100% EXTRA CHASSIS REINFORCEMENT A TOTAL OF 6X STABILIZERS LARGE HYDRAULIC WINCH WITH ATTACHMENTS, HOOK, AND PULLEYS X-RAY INSPECTION OPEN LOAD BED L = 415 CM W = 247 CM IMMEDIATELY AVAILABLE!!! FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS AND MACHINES. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU РОЗМОВЛЯЄМО УКРАЇНСЬКОЮ

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 589 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,575 mm, fuel type: gas, mast type: triplex, construction height: 2,145 mm, fork length: 1,100 mm, drive type: Treibgas, LPG forklift Mast type: Triplex Kedpou D Syvefx Aamsnc Technical condition: very good Front tires type: Superelastik Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty/guarantee and no return. Viewing possible by arrangement. Our general terms and conditions apply. Sideshift, 3rd valve, 4th valve, front working lights, roof cover, windshield, heating, full cab, CE certificate, full cab with heating, LED front combination light incl. ASW, ASW rear, LED reversing light, rear combination light, reinforced Cascade sideshift mounted in front, Z 1+Z 2 to fork carriage, mini-lever, air-sprung MSG 75 seat, safety and comfort plus packages, hydr. damped GZ, shock-free lowering, tilt and height-adjustable steering column, limitation of maximum speed and acceleration when load is raised, load weight display, high-performance alternator, transmission shift protection, lights off when ignition is switched off, panoramic mirror, PIN code option,

Condition: good (used), Technical specifications for the securing bolt: System: Elvedi Type: HRZ 15 Included in delivery: Knedpfowdvzljx Aamec 1x securing bolt, used for cantilever rack Material color: galvanized Dimensions: 178 x 24 x 17 mm (LxWxH) Weight: 0.660 kg/piece For securing the cantilever arms against accidental lifting Currently in stock: approx. 350 pieces The stated price corresponds to the pickup price including VAT. Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system Knjdpfx Aasw Nhbmomec -Filter system -Filter frame: 2135/2135/H2030 mm -Vibration motor: 0.55 kW -Funnel frame: 2100/2130/H2330 mm -Discharge gear motor: 2.2 kW 8.7 rpm -Opening: Ø 250 mm / 250 x 220 mm -Individual components: see photos, without extraction fan -Weight: 320 kg / 890 kg

Condition: excellent (used), 2 x KHS / GEA High Speed Keg Filling Lines Capacity: 1,000 kph Knedpfx Ajxcinmsamsc Sizes: 15L, 20L, 30L, 50L 60L Keg Palletiser System also available. Location: Dublin Please contact Indassol for further details & pricing.

Condition: used, empty load weight: 9,600 kg, maximum load weight: 25,400 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2003, loading space length: 13,000 mm, loading space width: 2,450 mm, loading space height: 2,700 mm, loading space volume: 86 m³, total length: 14,050 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 3-axle, BPW axles, air suspension, lifting+lowering, ABS (anti-lock braking system), roller tarpaulin, walkway, doors, front support, storage box left side doors can be opened ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Knedpfx Aovhhqzjamoc - .

Condition: new, Year of construction: 2025, Powder filling system for pre-made large bags/sacks with subsequent sealing and/or sewing of the bag/sack. The system includes product feed (screw conveyor), screw feeder with weight feedback, conveyor belts to feed to the heat sealing machine and to the sewing machine. The pre-made bags are manually clamped into the pneumatic clamp support by hand. The product is dosed and filled into the bag. Then it is manually guided by conveyor belt to the heat-sealing or sewing module and sealed or sewn. - Specifications auger filler: weight range: 10-50kg (when changing the dosing screw); accuracy: +/-0,5%; max. speed of the machine in neutral: 8 cycles/min; capacity of storage hopper: 100L; power: 380V, 50Hz, 3kW; stainless steel version AISI 304; machine dimensions: L1150xW1000xH2550mm; weight: 450kg. Specifications screw conveyor: Capacity depending on the product: up to 5m³/h; capacity of storage container: 100L; pipe diameter: 159mm; standard angle: 45° (customization possible 30-60°); current: 3P, 380V; machine dimensions: L1160xW890xH1000mm; weight: 150kg. -Specifications sealing machine: Suitable for bags with h: 450-750mm; sealing angle adjustable by 20°; machine dimensions: L720xW560xH1340mm; weight: 100kg. - Sewing machine specifications: Suitable for bags with H: 400-900mm; coiling width: 30-50mm; conveyor belt length: customized. Dimensions and total weight of the system depend on the final layout, can be customized. Knjdpfx Aajv Nm D Nsmec Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, mileage: 260,894 km, power: 235 kW (319.51 HP), first registration: 10/2013, fuel type: diesel, empty load weight: 11,100 kg, maximum load weight: 6,900 kg, overall weight: 18,000 kg, axle configuration: 4x4, wheelbase: 4,100 mm, brakes: engine braking, color: orange, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 4,200 mm, loading space width: 2,450 mm, loading space height: 500 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, crane, cruise control, differential lock, immobilizer system, onboard computer, parking heater, power assisted steering, seat heater, soot filter, traction control, trailer coupling, * German vehicle * From 1 owner * Condition, see photos * Original Only 260,884 km * Service booklet maintained and inspection books available * Atlas crane foldable behind the driver's cab * Type 75.2-A2 * Lifts at 1,900mm = 3,750kg - 3,750mm = 1,950kg - 5,450mm = 1,320kg - 7,150mm = 1,000kg - 8,840mm = 770kg * with radio remote control * 5th + 6th control circuit * Hook height 10.5m * 2 hydraulic supports * Meiller three-way tipper * Loading area length 4,200mm x width 2,450mm x height 500mm * Steel beams with DIN lashing eyes * Winter service equipment * Municipal plate * Municipal hydraulics * Trailer coupling * Trailer load 24,000 kg. * Total train weight: 40,000 kg * Leaf - air suspension + raise/lower * Municipal lighting and headlights * 4x4 all-wheel drive * Air-suspended driver's cab * Rear window * Air conditioning * Auxiliary heating * Heated windshield * Differential lock * Turning assistant * Rear view camera * Bluetooth telephone * Electric windows * Electric mirrors heated * Work lights * 2 comfort seats with air suspension & heating * Additional headlights * Rotating beacons * GVW 18,000 kg. * Empty weight 11,300 kg. * Payload 6,700 kg * Snow blade and salt spreader available for an additional charge If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their condition and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - . Kjdpfevzticsx Aamsnc

Year of construction: 2002, condition: used, electric clutch brake, clutch/brake combination, clutch-brake combination for strapping machine, packaging machine, strapping machine, skinpack machine, wrapping machine, winding machine, drive unit for stretch wrapping machine -Manufacturer: Bonfiglioli, drive unit from packaging machine ILAPAK Astra-STD -Type: GFF 200014/112 EE B3 Kedpfxju Npg Ro Aamjnc -Motor: 24 VDC / 35 W -Individual components: see photos -Dimensions: 345/180/H230 mm -Weight: 22 kg

Condition: used, pickoff with shaft for Schutte multi spindle automatic lathe SF67, used pickoff C26GF pickoff shaft C26GF9S1 gear WG-67S Kodpfx Aaeyn Aa Iomsnc Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,295 h, load capacity: 1,500 kg, lifting height: 3,300 mm, fuel type: gas, overall weight: 2,640 kg, total height: 1,995 mm, total length: 3,290 mm, total width: 1,070 mm, Toyota Tonero 15, Model 02-8FGF15, LPG forklift Used, from business liquidation Torque converter transmission for smooth driving Clear view of the fork tips at any working height – for safe and efficient driving and operation Technical data and information according to the manufacturer: Toyota 02-8 FGF15 LPG forklift LPG forklift Year of manufacture 2016 Operating hours 1,295 h Serial number 8FGF18-62319 Drive: LPG Load capacity 1,500 kg Lifting height 3,300 mm Weight 2,640 kg Engine 38 kW Active Stability System (SAS) Mast control Steering synchronization Steering axle stabilizer OPS (Optimal Personnel Protection) Free-lift mast (V) Fork carriage Load protection grid Forks (1000 mm) 3 valves (A400) Super Elastic tires (SE) Double-acting parking brake Work light Kedpfxez Hy Ntj Aamjnc Rear combination light Cyclone air filter with intake in the operator protection frame Overall length 3290 mm Overall width 1,070 mm Height, mast retracted 1,995 mm Without LPG Pictures show an empty LPG tank Apart from signs of use, the LPG forklift is in a condition that is typical for its age and usage. We recommend an inspection. Information without guarantee Data, information, and technical specifications from the manufacturer To avoid any misunderstandings regarding the item's condition and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 a.m. and 12:00 p.m. and 1:00 p.m. and 4:30 p.m. During this time, inspections and collections are possible and desired, AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 6,594 h, load capacity: 1,500 kg, lifting height: 4,000 mm, fuel type: gas, mast type: simplex, construction height: 2,595 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,500 kg Lifting height: 4,000 mm Overall height: 2,595 mm MACHINE DETAILS Mast type: Standard Vehicle type: Internal combustion forklift ISO class: ISO Class 2 = 1,000–2,500 kg Knjdpjz I R H Eefx Aamec Unladen weight: 2,740 kg Operating hours: 6,594 h EQUIPMENT Side shifter 3rd valve External reference: SL12034SLO

Condition: used, mileage: 119,550 km, power: 120 kW (163.15 HP), first registration: 08/2022, fuel type: diesel, overall weight: 3,050 kg, fuel: diesel, energy efficiency: G, color: white, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 3, total width: 2,244 mm, total height: 1,910 mm, Equipment: ABS, air conditioning, airbag, cruise control, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, E07 Hill-start assist, BB7 CO2-optimized braking system, CF0 Basic chassis, CL1 Steering wheel adjustable for inclination and height, CL4 Multifunction steering wheel with trip computer, D51 Partition, continuous, with 1 window, E1D Digital radio (DAB), E2R Radio generation 2, E34 Buffer battery for starting, E57 Electrical system for trailer socket, EA4 Audio 40, ED4 Fleece battery 12 V 92 Ah, EL8 2-way speakers at the front, EW6 Digital extra: Remote Services Plus, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown assistance, EZ5 Parking package, EZ8 PARKTRONIC, F61 Interior mirror, F66 Lockable glove compartment, F68 Exterior mirrors, heated and electrically adjustable, FR1 Rear camera, not foldable, FR8 Reversing camera, FY7 Multi-button remote control, GE1 6-speed manual transmission TSG 380, H16 Seat heating for driver, H20 Heat-insulating glass all around, HH9 Semi-automatic climate control system TEMPMATIC, HI1 Climate zone 1 (cold/comfort), I52 HU Map Data Country Set 3, IB6 Model series C447 Vito/V-Class, IG5 Basic, IN2 Wheelbase 3200 mm, long overhang, J55 Seatbelt warning system for passenger seat, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JK3 Instrument cluster with pixel-matrix display, JW8 ATTENTION ASSIST, JX2 Service interval 40,000 km, KB5 Main tank 70 liters, KP7 Exhaust gas purification SCR generation 4, L16 Fog lamps, halogen, LA2 Headlamp assistant, LC2 LED light strip in the cargo area, LC4 Comfort roof control unit, LE1 Adaptive brake light, LX5 Europe, M3E Suction fan, electric, performance level 5, M60 Generator 14 V / 250 A, M72 Vehicle capable of running on HVO, MG9 Generator management, MJ8 ECO Start-Stop function, MS1 TEMPOMAT, MT6 Emission class Euro 6d N1, MX0 B., We are available by telephone Monday - Friday until 8:00 PM and Saturday until 4:00 PM!! Furthermore:!! Leasing/financing and trade-in possible!! Kedpfxoz Rn Tcs Aamjnc !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2016-08-30, total length: 2,100 mm, total width: 1,200 mm, total height: 1,900 mm, overall weight: 2,500 kg, CONGDA 16/16/6 Counter-Pressure Filling Machine – up to 3,500 bottles/hour For sale: a CONGDA 16/16/6 bottle filling machine, manufactured in 2016. The machine underwent a complete overhaul in April 2026, which included replacing bearings, seals, springs, and other wear parts. In addition, the machine has been technically improved in several areas since it was put into operation. During this process, various original components were replaced with high-quality parts from European manufacturers. Technical specifications - Manufacturer: CGET (China) - Year of manufacture: 2016 - Configuration: 16/16/6 (rinsing / filling / capping) - Filling system: Counter-pressure filler - Filling capacity: Up to 3,500 bottles per hour, depending on factors such as carbon dioxide content and temperature - Bottle format: Set for 33 cl Longneck bottles - Weight: Approximately 2,500 kg - Documentation: Technical documentation available Complete overhaul in April 2026 In April 2026, the machine underwent an extensive technical overhaul. During this overhaul, the following parts, among others, were replaced: - Bearings - Seals - Springs - Various other wear parts Additional technical improvements Since it was put into operation, the machine has been further optimized in several areas. Various original components have been replaced with parts from European manufacturers. The most important improvements are: - Replacement of the vacuum pump - Replacement of all sensors - Installation of a digital pressure gauge on the filling bowl - Replacement of various parts of the rinser - Replacement of the capping dies - Various other technical improvements As a result of these modifications, the machine has been technically improved in several key areas compared to its original configuration. Additional items included Knedpoz Nlcxjfx Aamec The machine comes with a comprehensive package of extra parts, including: - Various chain conveyor parts - Large quantity of spare parts - Extra seals - Springs - Filling tubes - Various other technical parts and wear parts Asking price: €34,900,- excluding VAT Location: Breda More information, photos, and videos are available upon request.

Condition: ready for operation (used), functionality: fully functional, power: 150 kW (203.94 HP), first registration: 12/2026, fuel: diesel, From our stock of used vehicles, we offer you: Fire engine HLF 10 on MB ATEGO 815 4x2 Kjdpezi Ubfefx Aamjnc Chassis • Mercedes Benz MB 815D with manual transmission • 110 kW / 150 hp at 4249 cm³ • Power steering • Trailer coupling • First registration 12/2006 • Mileage approx. 28,750 km • Three-point seat belts for all 9 seats Superstructure • Manufacturer: Rosenbauer • 2 PA in the cab + 2 in the superstructure • Design: HLF 10 • Pump capacity 10-1000 • Water tank 1,000 l • Stowage for standard equipment • FIAMM signaling system • 230 V charging system A complete inspection and maintenance will be carried out on the vehicle. This includes a thorough check of all technical components such as the engine, transmission, differential, and pumps, as well as the replacement of all filters and lubricants. The vehicles will receive a current TÜV (technical inspection) and SP (safety inspection) certificate. We will be happy to provide you with a specific offer and give you a detailed presentation of the vehicle. Note: All information is provided to the best of our knowledge and belief, without guarantee of completeness and accuracy. Images may show optional equipment. This does not constitute an offer, but rather information. Subject to prior sale!

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 329 h, load capacity: 2,500 kg, lifting height: 5,000 mm, free lift: 1,675 mm, fuel type: gas, mast type: triplex, construction height: 2,245 mm, fork carriage width: 1,220 mm, empty load weight: 3,970 kg, drive type: Treibgas, construction width: 1,150 mm, Internal combustion forklift Load center: 500 Mast type: Triplex Technical condition: very good Knsdpfx Aasz Dlptomec Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 6.00-9 Rear tire condition: 80 - 100% Side shifter, 3rd valve, 4th valve, rear work light, front work light, roof cover, windshield, load guard, full free lift, CE certificate, driver protection roof, standard OPS seat Grammer MSG 65 synthetic leather, mechanical lifting with direction change switch on the steering column, multifunction display II, LED work light, floor mat, storage compartment, panoramic mirror.

Condition: used, mileage: 961,000 km, power: 281 kW (382.05 HP), first registration: 01/2015, fuel type: diesel, overall weight: 26,500 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Additional information: * Payload: 16955 kg * Height: 3950 mm * Width: 2550 mm * Length: 6470 mm * Type | First axle: Michelin R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 50% * Tire tread depth inner right | First axle: 50% * Maximum axle load | First axle: 7500 kg * Type | Second axle: Michelin R * Type | Third axle: Michelin R * Tire size | Second axle: 385/55 R22.5 * Tire size | Third axle: 315/70 R22.5 * Tire tread depth outer left | Third axle: 50% * Tire tread depth inner left | Second axle: 50% * Tire tread depth inner left | Third axle: 50% * Tire tread depth outer right | Third axle: 50% * Tire tread depth inner right | Second axle: 50% * Tire tread depth inner right | Third axle: 50% * Maximum axle load | Second axle: 7500 kg * Maximum axle load | Third axle: 11500 kg * Wheelbase: 405 cm * Cab: Yes * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Steering | First axle: Yes * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Reduction | Third axle: Single reduction * Lift axle | Second axle: Yes * Twin tires | Third axle: Yes Kedez Exx Ropfx Aamenc * Driven | Third axle: Yes * Steering | Second axle: Yes * Alloy wheels | Second axle: Yes * Position | First axle: Front * Brand | First axle: Other * Alloy wheels | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brake type | Third axle: Disc brakes * Differential lock | Third axle: Yes * Alloy wheels | Third axle: Yes Additional features: * 27 MC / CB * Adaptive cruise control * Aluminum fuel tank * Trailer coupling * Anti-lock braking system (ABS) * Traction control * Automatic transmission * Roof spoiler * Double glazing * Double fuel tank * Electric windows * Electronic Braking System (EBS) * ESP (Electronic Stability Program) * Cruise control * Website * Air conditioning * Refrigerator * Leather seats * Air suspension * Air-suspended seats * Metallic paint * Fog lights * Particle filter * Radio/CD player * Retarder * Disc brakes * SemCollection * SemStars * Side skirts * Spoiler * Xenon lighting Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | We kindly request that you inquire in advance about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.