Used Wohlhaupter Boring Tool for sale (37,416)

Condition: excellent (used), Year of construction: 2013, overall weight: 220 kg, chuck outer diameter: 600 mm, Metal cutting Tooling Njdpfjy T Ik Rex Amnelb TDG Spain - 4-600 MACH-ID 9627 Make: TDG Spain Type: 4-600 Year: 2013 Diameter: 600mm 4 chuck: yes Max. speed:970Rpm Length: 1200mm Width: 800mm Height: 400mm Weight: 220kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Hardinge HLV-H High Speed Super Precision Tool Room Lathe Max’ Distance Between Centres 18” Max’ Swing over Bed 11” Max’ Swing Over Carriage 9” Max’ Swing over Cross Slide 6” Spindle Capacity: Though Spindle - 1 1/4” 5C Round Collets - 1 1/16” 5C Hex Collets - 7/8 5C Square Collets - 3/4” With Step Chucks – 1 1/16” to 6” With Jaw Chuck (Through Spindle) - 1 5/32” With Expanding Collets 3” Variable Spindle Speeds - 125 to 3000 rev/min Tailstock M/T 2 3 Phase Electrics Nljdpfxjy Nfqme Amnob Net Weight (approx.) 750Kgs Supplied with: 2 Axis Digital Readout 4 Jaw Chuck Faceplate 3 off Multifix Tool Holders Set of Misc’ 5C Collets For Sale Jet Machinery Ltd Jet Machinery Stock No: #79017 Machine Serial Number: HLV-H14793T Cost: £8,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm Nljdpfx Asy T E Itsmnjb W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Quick-change tool post, tool post head, quick-change tool post, quick-change drill bit post, quick-change boring bar post, quick-change turning tool post, double tool post, double turning tool post, double tool post, double quick-change holder Nlsdpfxjwuygao Amnjb -Quick-change tool holder: quick-change boring bar holder -Bore: Ø 16 mm -Recording dimensions: see photos -Clamping height: 32/25 mm -Clamping length: 140 mm -Dimensions: 180/140/H160 mm -Weight: 15.7 kg/piece

Condition: used, Acer ‘E’ Mill Turret Milling Machine (Ex College) Nedpfxsyzfn As Amnelb 2 Axis Newhall Spindle Taper R8 Spindle speeds to 60 – 4200rpm Table Size 50 x 10” Table Power Feed Longitudinal 415V Electrics Coolant For sale with Jet Machinery Ltd Jet Machinery Stock No: #79134 Machine Serial Number: 506016 Cost: £2,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Njdpox T Ddysfx Amnslb Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 1998, Tool presetter KECHL Type:Trabant 271-2/M Year 1998 Movable by hand / with handwheel / button feed and rapid traverse. Travel : X/Y 270 mm Nsdpfjr H D N Aox Amnolb In good condition . Documentation available .

Condition: excellent (used), Year of construction: 1988, Tool grinding machine, manufacturer MICHAEL DECKEL, model S0, year of manufacture 1988. Comes with accessories and operating manual. In very good original condition. Nljdpfxoyxgm Io Amnsb Further data can be found in the specification sheet.

Condition: good (used), Year of construction: 2006, Universal tool milling machine KNUHT type: WF 5 year 2006 with 3-axis digital indicator, stepless feeds, hydraulic tool clamping. Table size : 800 mm X 300 mm max. load 350 Kg. Travels : X/Y/Z 450/400/320 Spindle mounting : ISO 40 spindle speed : 63 - 3150rpm Stepless feeds : 5-1250mm/min Nodpfxsichr Sj Amnjlb rapid traverse .1800mm/min Space requirement : 1,7m X 1,7m X 1,9m Weight.ca.1800Kg. Machine docs available ,machine demonstration ready undercurrent .

Condition: used, x-travel 1000 mm y-travel 330 mm z-travel 500 mm Nlsdpfx Aey Ul U Nomnsb table-size 1300 x 280 mm turning speed range 30- 1500 U/min power requirement 2,5 kW tool adaptor ISO 40 | feed speeds 13- 620 mm/min | weight 2,1 t range L-W-H 2,0 x 1,5 x 1,9 m Universal tool room machine with digital scale - turn- and swiveling v- head . h- spindle - automatic feed - hand wheels - coolant system - machine light

Condition: like new (used), NOFIX quick-change tool holder for retrofitting to milling machines, boring machines, etc. For ISO / SK 40 spindle mounts Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Nljdev Saaijpfx Amnob DE - 44143 Dortmund - Wambel

Condition: used, tool taper CAT 40 Nlsdpfx Amjy Ty Emeneb number 67 st. / pcs.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical Details Measuring range X-axis: 300 mm Measuring range Y-axis: 250 mm Measuring range Z-axis: 600 mm Tool diameter: mm Table size: mm Control: Weight: 700 kg Machine dimensions: 2600 x 1400 x 1900 mm Coolant tank: 800 x 600 x 920 mm Additional information Combined setting, shrinking, and measuring device, induction coil with tailstock and cooling system CNC control Software: Saturn 1 Zoller Multivision II Automatic length stop system in the Z-axis for setting and shrinking to the target dimension Cooling system with water for cooling times of max. 40 seconds Setting to the target dimension, shrinking, and inspection measurement for one tool in max. 2 minutes, including cooling Without tool holders (attachment holders). Nlsdpey Twi Aofx Amnob On May 30, 2022, the machine was inspected by a technician from ZOLLER. Shrinking is currently not possible. The induction coil and drive unit would need to be replaced. The purchase price of a comparable new machine (including software) from ZOLLER is approximately EUR 100,000.00, with a current delivery time of approx. 52 weeks!

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table Njdpfxey Tt I Ue Amnslb * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M Nedpfx Amey Tlx Sonslb table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine Nljdpfsy Tvttjx Amnsb -Manufacturer: Mikron, tool changer from CNC machining center Mikron VC500D -for: max. 16 recordings -Recording: SK40 -Individual components: see photos -Transport dimensions: Ø 780 x 540 mm -Weight: 56 kg

Condition: used, turning speed range - grinding spindle 4500 U/min max diameter of the vice bore 17,5 mm max. radius to grind max. 10 mm max. lateral adjust. of milling cutter 10 max. longitudinal adjust. of milling cutter 40 max. angle for relief grinding 45 Grad weight of the machine ca. 125 kg Operating instructions available Nlodpfxowlvrge Amnob including collet set, grinding wheel flange wrench and the following special accessories: - Aluminium oxide grinding wheel - 3 diamond grinding wheels, different versions - 1 additional grinding wheel holder with diamond grinding wheel - Dressing diamond - Grinding dust cover

Condition: used, Year of construction: 1986, x-travel 390/410 mm Nlodpfx Amjvylkconsb y-travel 290/310 mm z-travel 380/400 mm total power requirement 4 kW weight of the machine ca. 1,25 t dimensions of the machine ca. 2100x2100x1700 m technical data please see attachment!

Condition: used, 1x bending knife from a VOEST press brake Length: 4050 mm Weight: approx. 120 kg Nlsdpfx Ajy Tbvmomnsb For further dimensions see pictures.

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN Njdstqmm Aepfx Amnslb rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Condition: used, Used machine Used Ganner Compact 30 line boring machine Equipment and technical data: 2 drilling beams with 15 spindles each Pitch 32 mm Position adjustment drilling unit 0 - 650 mm Distance between the rows of drill holes at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Clamping height of the workpieces max. 70 mm Working height 850 mm Compressed air connection 6 bar Njdpfx Aewhuh Sjmnolb Availability: by arrangement Location: Solingen

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW Nledpowid Spjfx Amnsb SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: used, Year of construction: 2003, travel -x axis 180 mm Nodpfxeydqnfo Amnslb travel -z axis 370 mm Total weight, approx. 65 kg dimensions of the machine ca. 2,0 x 1,2 x 2,0 m Tool Presetter DMG Microset - ECO 1

Condition: used, number 1x tool adaptor VDI 50 Shank diameter 50 mm tool adaptor Capto C5 Torque max. 100 Nm Max. Speed 4.000 min/-1 weight 19,7 kg Driven Tool WTO 410505081-50 - Angle Drilling and Milling Attachment - Recessed - With Coromant Capto C5 - Internal and external coolant supply - Max. coolant pressure: 80 bar ---- MACHINE APPLICATION ---- DMG Mori CLX/CTX 750 V1/V3/V4, ecoTurn 650 DMG MORI CTX beta VDI50 Disc Turret DMG CTX gamma VDI50 Disc Turret EMCO Maxxturn 110 (VDI50) GILDEMEISTER CTX 620 linear GILDEMEISTER CTX 650 Ecoline SAUTER Disc Turret VDI 50, DIN 5480, right VICTOR VTurn-36/40/45/46CV (DIN5480) - Machine interface: VD50A - Drive coupling: DIN 5480 - i (n1:n2): 1:1 - Direction of rotation: same - Coolant supply: IC 80 bar - Functional length LF: 124 mm - Projection length LPR: 183 mm Nlodpfx Amjyycwrjnsb - Functional width WF: 34.75 mm

Condition: used, Year of construction: 1997, turning speeds 3.000 U/min grinding wheel diameter 150 mm table-size 380 x 220 mm T-slots 1x 0 3~220 / 380 V total power requirement 0,37 kW weight of the machine ca. ca. 150 kg Nsdpfx Amsup H D Eonjlb dimensions of the machine ca. 0,7 x 0,6 x 1,25 m Turning Tool Grinding Machine GREIF - DHL K-0