Used Weinig Powermat 2400 (7 Spindle 50Mm) for sale (38,692)

Condition: used, Weinig combiner machine, model PFA17N, grooved bench, 8 shafts (lower 4kW, right 4kW, left 5.5kW, right 4kW, upper 5kW, lower 4kW, universal 4kW, universal 4kW), used. Tjdpoy S Acxofx Ah Ija

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS 8X 4 KW MILLING MOTORS DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED Tedpfx Aey Sgx Rsh Ioa MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED VERY GOOD QUALITY KNOTCHING PRICE DISMANTLED AND LOADED TO TRUCK

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Fully Adjustable Index Method: Manual index after each knife is ground. Tsdpfxjq Dzi Te Ah Iea Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: excellent (used), 15 kW engine Cutting height 7 cm Track width 17 cm Feed rate adjustment Todpey I U T Isfx Ah Ija

Condition: like new (used), functionality: fully functional, Hydraulic feed to the Weinig Hydromat. Tsdpfx Aev Er Ufeh Ija Feed speed 8-60m/min

Condition: used, For sale are various table tops Tsdpopq Nxxjfx Ah Ioa

Condition: used, Year of construction: 1985, functionality: fully functional, For sale is a used four-sided planing machine from Weinig with 7 spindles and an infeed roller conveyor. The machine has been in our facility since at least 1985 and was workshop-overhauled in 2007. It is functional but is no longer in use. The exact year of manufacture and the exact model designation are unknown. Based on the design and features, it is likely a machine from the Weinig Unimat series. Technical data (approximate values): - 7 spindles - Spindle diameter: 40 mm - Working width: approx. 20 – 170 mm - Working height: approx. 8 – 120 mm - Tool diameter: up to approx. 160 mm - Feed rate: 6 – 24 m/min - Voltage: 380 V / 50 Hz - Weight: approx. 4,500 kg - Incl. infeed roller conveyor - Incl. various cutters (see photo) Todjza S Edjpfx Ah Iea The machine is sold without any warranty. Inspection and testing on site are expressly desired.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, WEINIG four-sider U17A, year of manufacture 1982 with 7 spindles with universal spindle used Spindle arrangement: bottom-top-left-right-top-bottom-universal Motors: 4.0 - 3.0 - 5.5 - 7.5 - 5.5 - 4.0 - 4.0 kW Tsdpfxox Sqdko Ah Iea Planing width approx. 170 mm Planing height approx. 120 mm Spindle diameter 40 mm Pneumatic pressure of the rollers Infeed before the jointer Continuously variable feed speed Extraction port 7 x 120 mm Space requirement approx. 5200 mm x 1400 mm x 1500 mm Weight approx. 3000 kg

Condition: excellent (used), functionality: fully functional, Heavy-duty Raimann multi-blade saw with large cutting width. Tedsxtwvtopfx Ah Ioa Chain bed width 500 mm. Usable clamping length of saw sleeves 570 mm Cutting height 120 mm. Powered top rollers. Electric pressure beam adjustment. Spiked chain. Counter bearing. Stepless hydraulic feed from 0 to 50 m/min, new. Drive motor 75 kW with pneumatic tensioning station. 2 saw sleeves. Safety devices. Electrical control cabinet. Etc. Some new parts installed.

Condition: used, Year of construction: 1980, with 7 shaftswith unispindleusedWeinigtype U17Ayear of construction 1980machine . 11881959spindle arrangement u-re-li-re-o-u-unimotors 4.0 - 3.0 - 5.5 - 7.5 - 5.5 - 4.0 - 4.0 kWplaning width approx. 170 mmplaning height approx. 120 mmspindle diameter 40 mmpneumatic pressure of the rollersinfeed before the planerfeed speed infinitely variablesuction connection 7 x 120 mmspace requirement approx. 5200 mm x 1400 mm x 1500 mmweight approx. 3000 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as is, as inspectedwithout guarantee and warranty Tedpfxjvwfqdj Ah Isa

Year of construction: 1971, condition: used, Shaft Arrangement 1. Lower shaft – 4 kW, 2850 rpm 2. Right side shaft – 3 kW, 2850 rpm 3. Left side shaft – 3 kW, 2850 rpm 4. Right side shaft – 3 kW, 2850 rpm 5. Upper shaft – 5.5 kW, 2850 rpm 6. Lower shaft – 4 kW, 2850 rpm Dimensions: 4900 mm x 1300 mm x H 1500 mm Weight: approx. 5500 kg Tjdpeigqzrsfx Ah Ija

Year of construction: 1987, condition: excellent (used), working width 170 mm planing height 120 mm table surface length 1950 mm 5 spindles: Tsdpfx Ahelx Em Ue Iea 1. lower 2. right 3. left 4th top 5. universal feed speed 6.5 - 49 m/min. cardan feed electrically lifted pressure beam

Condition: excellent (used), Year of construction: 1981, 4-SIDE PLANER MOULDING MACHINE WEINIG UNIMAT 17 A With 5 spindles Technical specifications: Working width: max 180 mm Working height: 120mm Spindle speed: 6000 rpm Diameter of the spindle: 40 mm Smallest tool diameter: 100mm Tedjgqrunjpfx Ah Isa Max. tool diameter: 160mm Max. diameter of the vertical spindles : 180mm Max. tool diameter of the 2nd right spindle: 195mm Max. tool diameter of the upper spindle: 200mm Max. tool diameter of the lower spindle: 180mm Feed speed variable: 7 - 18 m / min Throughfeed with springs pressure Trasmissione a catena ( non cardanica) Spindle arrangement: 1. spindle bottom hotizontal(planer), KW 4 2nd spindle vertical right KW 3 3rd spindle vertical left- KW 4 4th spindle upper horizontal KW 5,5 5th spindle bottom horizontal KW 4 1 set of Planing tools are included Volt 380/50 hz SECOND-HAND MACHINE IN GOOD CONDITIONS, TESTED IN OUR WORKSHOP BEFORE DELIVERY

Condition: excellent (used), Year of construction: 1980, machine/vehicle number: 1193-1003, 6 heads Todpeytkchofx Ah Ioa stepless feed speed adjustment electric pressure beam adjustment manual table lubrication head adjustment in two axes

Condition: used, Weinig brand moulding machine, Unimat U17N model with 7+1 axes, 170 mm axis length, with ruled table, cardan shaft drive. Axle composition: Bottom, right, left, right, top, bottom, left, universal. Axle motor power: 4+4+5.5+5.5+7.5+5.5+5.5+7.5 Kw. Tsdpfxjpfp Elj Ah Ioa Towing motor power 4 Kw raises and lowers 0.75 Kw.

Condition: good (used), Year of construction: 1991, I sell the heavy duty fourside moulder Weinig Unimat 17 Feeding speed 6,5 - 49 m/min. Working width 170mm Working height 130mm 7 spindles (6+Universal) Configuration: bottom - right - left - right - top - bottom (motor missing) - universal Total power apprx. 33kW Incl. Moulding heads and accessories on photos. Machine suitable mostly for wooden facing, parquettes and floors production. Fully working! Sellable immediately Deffects: broken entry table (can be underlaid like on the photo) Tjdpfxsf Rtgks Ah Ioa 1 pc. Motor for spindle nr. 6 missing

Condition: used, Technical data: Max planing width: 170 mm Tedpfx Ajyhndreh Ioa Max planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 6 Spindle sequence: bottom 4 kW right 3 kW left 5.5 kW right 5.5 kW top 5.5 kW bottom 4 kW Each spindle driven by a separate motor Number of upper steel feed rollers: 7 Number of upper rubber feed rollers: 2 Stepless feed speed adjustment – 4 kW Feed by chains Lubrication pump for worktable Pressure: 6 atm. Electric raising of the machine body Power supply: 400 V Total power: 33 kW Overall dimensions: Length: 5000 mm Width: 1300 mm Height: 1560 mm

Condition: good (used), Year of construction: 1982, WEINIG Four side planer, 5 heads PM 17 machine no. 1329-2356 year of manufacture: 1982 planning width 170 mm planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm infeed table length 2000 mm with planer heads 6 spindles arrangement: 1 bottom 4 kW 2. right 3 kW 3. left 5,5 kW 4. top 5,5 kW 5. bottom 4 kW / universal spindle diameter approx. 35 mm infeed speed 6,5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads dimension 4500 mm x 1300 mm x H 1500 mm Weight appr. 3800 kg Todpfxsicbhvo Ah Ija technical specification under subject of correction

Condition: good (used), Year of construction: 1990, functionality: fully functional, Raimann Multi-Blade Saw K47 Year of manufacture 1990 S/N 24745 Machine No. 94800 Manufacturer Interholz Raimann GmbH Tjdpfx Ajv Rc Tveh Iea Technical specifications: Conveyor chain width 430 mm Shaft width 650 mm Maximum cutting height 120 mm Saw blade diameter 350 mm Spindle diameter 60 mm Sleeve diameter 80 mm Minimum length 69 cm 37 kW main motor Shaft speed 3000 rpm Feed motor 5.5 kW Infinitely adjustable from 0 to 50 m/min Feed speed adjustable via inverter Centralized lubrication system Automatic spindle height adjustment Automatic roller height adjustment Upper take-off rollers Pneumatic tension rollers Centralized lubrication system Overall machine dimensions: Length 330 cm Width 225 cm Height 220 cm Weight 7000 kg

Condition: ready for operation (used), Fanuc A06B-0830-B330 AC spindle motor, serial number: C978K0311. The terminal box is damaged; see photo. Used, with normal signs of wear and tear. 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request a separate quote for packaging and shipping costs! Tedpfx Ahsi D H Nnj Ioa

Condition: ready for operation (used), Fanuc A06B-0857-B928#3441 spindle motor, serial number C03YK0709, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of supply as shown in the photos. The agreed sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Tedpei D H Raefx Ah Iea

Condition: ready for operation (used), Fanuc A06B-0726-B202 spindle motor, serial number C918K0141, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. The agreed-upon sales discounts do not apply to this item. Please request the price separately! ATTENTION: Please enquire separately about the costs for packaging and shipping! Tsdpfx Asi D H I Heh Ija

Condition: new, This is a robustly built, stainless steel work table with a closed left side, 6 adjustable feet, a storage shelf, and an upstand of 50 mm. Due to its robust construction, it is also very suitable for food production facilities. The work table is new and unused, still with protective film. The stated price is the net price, less a 25% special discount, plus 19% VAT. Your offer price is €1007.78 net. OUR USED EQUIPMENT SERVICE FOR YOU: High-quality branded equipment at fair prices Todpeln Udpefx Ah Isa Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after the purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 seal TECHNICAL DATA: External dimensions WxDxH: 2700x850x900mm Upstand 50mm Left side closed One storage shelf Condition: New, unused SHIPPING: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to request advice, or would you like to view something on site? You can reach us by telephone during our opening hours: Monday-Friday 09:00 – 13:00 and 14:00 – 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Hand lever shears, long blade sheet and round steel shears, lever shears, sheet metal shears, profile steel shears -Handover: in current condition as viewed -Hand lever: missing -Manufacturer: VEB Pels, lever shears, profile steel shears type HS 7 -Cutting insert length: 250 mm -Angle profile: see photos Tsdpfjv Eakbox Ah Ioa -Dimensions: 580/170/H600 mm -Weight: 76 kg

Condition: good (used), Scissor lift table, scissor lift table, scissor lifting platform, scissor lifting platform, single scissor lift table, hydraulic lifting platform -Scissor lift table: with roller conveyor, on rail frame -Load capacity: 1000 kg -Platform: 2400 x 760 mm -Dimensions retracted: height 225 mm -Extended dimensions: height 1140 mm Tedpeuppidjfx Ah Isa -Rollers: diameter 40 x 510 mm, roller spacing 100 mm -Roller conveyor: with belt brake, pneumatic -Rail spacing: 1490 mm -Weight: 350 kg