Used Vidmar 720/480/H1200 Mm for sale (72,134)

Condition: good (used), Technical data for pallet rack beam: Racking system: SSI Schäfer Type: PR350 Nedpfsy Am Dzsx Aaaela Scope of delivery includes: 01x Pallet rack beam, used Material color: blue Beam type: TRN1-270-08-l INP profile: 80 x 42 mm Connector: 5 HK (hooks) Clear span: 2,700 mm 02x Locking pins, used Version: fully galvanized For securing the beams against unintentional lifting Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. If transport or shipping of this item is required, additional costs will apply, which can be provided separately depending on delivery location and scope.

Condition: good (used), Technical data for pallet rack beams: Racking system: META Thyssen Included in delivery: 01x pallet rack beam, used Color: yellow Beam type: HN 100|20 Nsdpfsy Akh Rjx Aaasla Box profile: 100 x 50 mm Connector: 3 HK (hooks) Clear width: 3,600 mm 02x safety pins, used Finish: fully galvanized For securing the cross beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transportation or shipping of this item is required, this will incur additional costs, which can be requested from us separately depending on place of delivery or scope of order.

Condition: good (used), total length: 1,000 mm, total width: 600 mm, total height: 2,500 mm, load capacity per storage section: 150 kg, TECHNICAL DATA • Manufacturer: META • Frame height: 2,500 mm • Width: 1,000 mm • Frame depth: 600 mm • Load capacity per shelf: 150 kg • Number of shelves per bay: 6 pieces • Finish: galvanized • Boltless assembly • Condition: used Large quantities available immediately from stock. Nlsdpfx Aouk E Thjaaoa Tiered prices per unit (net, plus VAT): Starter bay: 1 – 5 bays: €92.30 6 – 20 bays: €88.61 21 – 50 bays: €84.92 from 51 bays: €81.22 Add-on bay: 1 – 10 bays: €63.55 11 – 25 bays: €61.01 26 – 75 bays: €58.47 from 76 bays: €55.92 Available from our warehouse in Nordhorn. YOUR CONTACTS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & INSTALLATION We are happy to assist you with transport and installation. This item is available for collection. Delivery or shipping is available at an additional cost. Additional costs depend on the delivery location and shipment size, and can be quoted individually upon request. TERMS OF PAYMENT Payment terms to be agreed upon when placing the order. The quoted price is a per unit/net price, or as stated in the description text (plus VAT). You will, of course, receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, specializes in new and used products for warehouse logistics, conveyor technology, mezzanines, textile warehouses, as well as machines for trade, industry, and craft sectors. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please feel free to contact us with any questions. Four factors for your success – The four pillars of DLK: Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, TECHNICAL DATA • Manufacturer: META • Frame height: 3,900 mm • Floor width: 1,300 mm • Frame depth: 600 mm • Shelf load: 100 kg • Number of shelves per bay: 10 pcs • Surface: galvanized • Condition: used Nlsdsuba Rbepfx Aaaea Large quantities available immediately. Tiered net unit prices excl. VAT: Starter bays: • 1 - 5 bays: €136.90 net each • 6 - 20 bays: €132.94 net each • 21 - 50 bays: €128.98 net each • from 51 bays: €125.02 net each Add-on bays: • 1 - 5 bays: €94.00 net each • 6 - 20 bays: €89.30 net each • 21 - 50 bays: €84.60 net each • from 51 bays: €79.90 net each Available ex stock Nordhorn. YOUR CONTACT PERSONS AT OUR COMPANY: • Tanja Henkelmann • Rainer Nürenberg • Oliver Kopp TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping can be arranged at additional cost. Extra charges depend on the place of delivery and shipment size and can be provided upon request. PAYMENT TERMS Payment terms are to be agreed upon in case of order. The price is per piece/net price as stated in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ABOUT US DLK, based in Nordhorn, trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems, as well as machines for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands on favorable terms. If you have questions, please do not hesitate to contact us. Four wins – The building blocks of DLK’s success: Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: used, Various cantilever racking systems 6x rack: Dimensions: 6,125 x 2,400 x 3,000 mm Approx. weight: 8,000 kg 3x rack: Dimensions: 5,650 x 2,400 x 3,000 mm Approx. weight: 7,380 kg Nlsdpjyrq Nljfx Aaaja Structural calculations available !! Image 1 shows the rack in assembled condition !! ä16426

Condition: used, total length: 1,220 mm, total width: 400 mm, total height: 2,000 mm, load capacity per storage section: 150 kg, We are offering used shelving racks here. TECHNICAL DATA Manufacturer: Nedocn Model: Shelf N Frame height: 2,000 mm (new) Shelf dimensions: 1,220 x 400 mm (used) Load capacity per level: 150 kg Number of shelf levels: 5 pieces Boltless assembly Diagonal bracing Tiered net prices per unit plus VAT: Starter Bays: 1 - 5 units: €69.50 net each 6 - 20 units: €66.03 net each 21 - 50 units: €62.55 net each from 51 units: €59.08 net each Nlodpfx Ajy Dggljaasa Add-on Bays: 1 - 5 units: €47.50 net each 6 - 20 units: €45.13 net each 21 - 50 units: €42.75 net each from 51 units: €40.38 net each PLANNING Our sales team will be happy to provide you with a non-binding quotation tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the equipment. PAYMENT TERMS Payment terms are to be agreed upon at the time of order. All prices are per unit/net prices or as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for commerce, industry, and skilled trades. We continuously offer attractive deals on used equipment from various manufacturers at competitive conditions. Please do not hesitate to contact us if you have any questions. Four wins – The four success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: like new (used), total length: 1,220 mm, total width: 400 mm, total height: 2,200 mm, load capacity per storage section: 150 kg, We offer used boltless shelving racks here. TECHNICAL DATA Manufacturer: Nedocn Type: Shelf N Frame height: 2,000 mm (new) Shelf size: 1,220 x 400 mm (used) Shelf load capacity: 150 kg Number of levels: 6 Boltless assembly Diagonal bracing Tiered pricing net per unit plus VAT. Starter bays: 1 - 5 bays: €79.20 net per unit 6 - 20 bays: €75.24 net per unit 21 - 50 bays: €71.28 net per unit from 51 bays: €67.32 net per unit Extension bays: 1 - 5 bays: €55.00 net per unit 6 - 20 bays: €52.25 net per unit 21 - 50 bays: €49.50 net per unit from 51 bays: €46.75 net per unit PROJECT PLANNING Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and installation of the goods. Nledpfx Aaey Dgf Ioaja TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The indicated price is per unit/net price as specified in the description (plus VAT). You will of course receive an invoice with VAT separately indicated. ABOUT US DLK, located in Nordhorn, specializes in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine systems, textile storage as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Connect Four – The Four Success Modules of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: new, Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Technical data for pallet racking beam: Racking system: Mecalux Included in delivery: 01x Pallet racking beam, new Material color: RAL 2001 orange Suitable for frame: A103 Beam type: 2C-S 1115 Nodpfx Aash Dv Uqsaela Box profile: 110 x 50 mm Hook type: G.E. - 3 Clear span: 2,700 mm Weight per piece: approx. 15.026 kg Max. load capacity per pair of beams: 3,000 kg with evenly distributed load 02x Integrated locking pins, new For securing the beams against unintentional lifting General information about the article: This item is offered for collection only. Transport or shipment beyond this is subject to additional costs, which can be quoted separately depending on the delivery location and scope. Our range of services (prices on request): Assembly and installation Our general assembly terms and conditions apply Racking inspection Racking inspection according to DIN EN 15635, carried out in accordance with BGR 234 visual inspection requirements for all racking systems Delivery with our own vehicle fleet (unloading not included)

Condition: used, Year of construction: 2008, Zebra110pax4 label printer and pneumatic stamp. RA2315 Printer manufacturer: Zebra Printer type 110pax4 Control panel: LCD display with status display and buttons on printer, manual control panel on the side and control via PLC I/O Print type: Thermal transfer printing or direct thermal printing selectable Interfaces: Ethernet/control cable Print media: Standard media, tags and RFID media (reading and encoding of RFIF labels) Current label size: 90x36mm, applicator is designed for this size Label length min: 12.7mm Print media width: 16-114mm Ribbon width: 25.4-107mm Ribbon length max: 900m Roll size core diameter: 25.4mm Roll size maximum diameter: 101.6mm Resolution: 203 dots/inch (8 dots/mm) Nledpfx Ajux Sfzeaaea Dot size: 0.125mm x 0.125mm Print speed: 12 inches/second Base area: 700x700mm, with 100mm protruding control panel/compressed air maintenance unit Applicator height: 800mm lower edge Print speed: approx. 2 seconds/label with application Electrical circuit diagram enclosed Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: used, We are offering used order picking trolleys for sale. TECHNICAL DATA Height: 1,800 mm Width: 1,270 mm Depth: 470 mm Number of shelves: 3 pcs + garment rail 2 push handles 4 swivel castors with directional wheel with side step Pre-assembled Condition: used PRICE €140.00 net €166.60 gross incl. VAT Available quantity: 439 units Tiered pricing (per unit) 1 - 5 units: €130.00 net 6 - 10 units: €123.50 net 11 - 25 units: €117.00 net 26 - 50 units: €110.50 net 51 - 100 units: €104.00 net from 101 units: €97.50 net YOUR CONTACT PERSONS: Nlsdpfxoy Eqnms Aaaoa Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We will gladly assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at extra cost. Additional costs depend on the delivery location and shipment size, and can be provided on request. PROJECT PLANNING Our sales team will be pleased to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. TERMS OF PAYMENT Payment terms will be agreed upon when an order is placed. The price is indicated per unit/net price or as stated in the description (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US DLK, located in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile warehouses as well as machinery for commerce, industry, and trades. We continuously offer attractive used equipment from various brands and manufacturers at favorable conditions. If you have any questions, please do not hesitate to contact us. Four ways to win – The success factors of DLK: Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: ready for operation (used), Used can manufacturing line for the production of 153 mm milk powder cans. Optional can be quoted for other can sizes as well or can be set to 153 mm food cans. - Krupp Sdvt duplex slitter - Soudronic SBW150 welder - Free outside lacquer - Precision tools gas curing oven - Blema KEBS 160 flanger - Klinghammer SIA 180 beader Nledjvy Txzepfx Aaaoa - Angelus 50p seamer

Condition: new, Catalogue No.: HZ014 – Pre-milling Nledpfoyy Nf Aox Aaaea – Corner rounding – Brand new machine in stock – CE certificate – Professional grade TECHNICAL DATA Panel thickness: 8–45 mm Edge thickness: 0.4–3 mm Min. panel width: 90 mm Min. panel length: 170 mm Feed speed: 9 m/min Pre-milling speed: 12,000 rpm Front/rear milling: 12,000 rpm Top/bottom milling: 12,000 rpm Corner rounding: 12,000 rpm Polishing: 3,000 rpm Feed motor power: 1.13 kW Glue tank heating power: 1.315 kW Pre-milling motor power: 1.5 kW Preheating power: 0.4 kW Glue spindle power: 0.25 kW Front/rear milling motor power: 0.22 kW Top/bottom milling motor power: 2 × 0.37 kW Corner rounding motor power: 0.37 kW Polishing motors: 0.12 kW and 0.18 kW Total motor power: 6.16 kW Working table height: 960 mm Extended support width: 560 mm Extraction port: 3 × 125 mm Dimensions (L × W × H): 3731 × 720 × 1636 mm Weight: 915 kg Holzing G-MAX 480 straight-line edge bander with pre-milling, saw cutting, top-bottom milling, corner rounding, radius scraper and polisher ensures a high-quality finish on the workpiece. It handles edge banding from coils up to 3 mm thick and strips up to 4 mm thick. The machine is equipped with a 1.2 kg capacity glue tank. Net price: 98,000 PLN Net price: 23,300 EUR based on an exchange rate of 4.2 EUR (Prices may change in the event of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 6875 TECHNICAL DATA Nledpfx Aajyz In Eoaea - Feed opening width: 720 mm - Feed opening height: 160 mm - Thickness of material to be shredded: 160 mm - Shaft width: 720 mm - Shaft diameter: 600 mm - Knife length: 80 mm - Number of knives: 4×12 pcs - Screen size: 25 mm - Entry pressure feed roller: 0.75 kW - Bottom gear-driven feed roller: 1.8 kW - Top gear-driven feed roller: 1.8 kW - Vibrating chute length: 4470 mm - Vibrating chute width: 710 mm - Vibrating chute motor: 2.2 kW - Main motor: 55 kW - Autoreverse - Extraction nozzle diameter: 260 mm - Vibrating chute dimensions (L/W/H): 4470/950/930 mm - Machine dimensions (L/W/H): 3100/1500/1170 mm - Total weight: approx. 5500 kg – German-made – Very low hours of use – Original documentation - Autoreverse (adjustable) – Used shredder, in very good / excellent condition Net price: 159,900 PLN Net price: 38,070 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Bezel (28371) Nlodpfjlrp Nqox Aaaoa Center height 200mm diameter 65mm weight 9 kg more data, see picture

Condition: excellent (used), Professional height gauge from the renowned Japanese manufacturer Mitutoyo. The device is designed for precise height measurement and scribing on surface plates. This model offers a measuring range up to 600 mm and is equipped with a dial indicator and fine micrometric adjustment, ensuring very precise dimensional control. The robust construction and high-quality workmanship characteristic of Mitutoyo guarantee repeatable and reliable measurements. — Technical data: • Manufacturer: Mitutoyo (Japan) • Measuring range: 600 mm • Mitutoyo dial indicator • Indicator scale division: 2.5 µm • Micrometric adjustment • Stable, heavy base • Clear measuring scale — Applications: • Measurement of component heights • Scribing on granite surface plates • Dimensional inspection • Workshops, tool rooms, quality control departments — Condition: Used, in good technical condition. Shows normal signs of use. Sold exactly as shown in the photos. — Scope of delivery: • Mitutoyo height gauge • Dial indicator Nodpfxey Dirqo Aaajla • Micrometric adjustment mechanism

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. Nlsdjmhhypepfx Aaaea The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Nledpfx Aajmhh Dhjasa - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Nsdpfx Aemhh Dzsaasla Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) Nljdpfx Asmhhx Ijaaoa - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: Nodpfx Ajmhhyaoaaola 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Nlsdpfjh Ek Dasx Aaaea Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Nljdpfsmhh Ansx Aaaea According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) Njdpfx Aomhhf Seaasla - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Nedpfx Aasmhhl Hoaela Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Nlodpfx Aomidyfsaaja Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.