Used Three Rolls Bending Machine 3000 X 40 Mm for sale (114,644)

Condition: good (used), Year of construction: 1980, turning diameter over cross slide: 1,020 mm, turning diameter: 1,380 mm, turning length: 3,000 mm, Manufacturer: Leopoldo Pontiggia Type: SFE 700 Year of construction: 1980 3-jaw chuck 1200 mm Heidenhain digital readout system X / Z Axis Feeds in 2 directions Multi-fix tool system with inserts Specifications Metric US Standard Turning length 3000 mm Swing over bed Ø 1390 mm Swing over cross slide Bljdpfjwp H Rujx Alcoh 1020 mm Spindle bore 150 mm Bed width 700 mm Quill travel 300 mm Spindle mount Metric 80 Mk Power 18 kW Speed 0 - 350 rpm Workpiece weight 8000 Dimensions (estimated) Length 6600 mm Width 1800 mm Height 2000 mm Weight 18000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, taken from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they will not constitute representations or terms of contract. We recommend verifying all important details.

Year of construction: 2002, condition: good (used), Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Bljdpekvnc Sefx Alcjh Fine finishing of cylindrical bores Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, functionality: fully functional, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, position of the milling head: 2.5 x 2.5 °, mount diameter: 50 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total width: 50,000 mm, total height: 48,750 mm, total length: 212,400 mm, table length: 12,000 mm, table width: 1,650 mm, power: 0.03 kW (0.04 HP), overall weight: 50,000 kg, X-axis: 10300mm Y-axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 1650mm Table load: 50000 Power on spindle: 22/30kW Bljdpfx Aljrx Rtrjcjh Spindle speeds: 60-3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21240mm Width: 5000mm Height: 4875mm Weight: 50000kg

Condition: good (used), Year of construction: 1998, Manufacturer: Henninger Type: ZS-201 Year of manufacture: 1998 Self centerring device Double column slide ways Dressing Unit Tailstock by rack & pinion Eccentric adjustment 0 - 20 mm Large Cone-Stone tooling package Specifications Metric US Standard Minimum workpiece Ø 20 Ø Min. Bljdpfxovt Tuis Alcjh Maximum workpiece Ø 450 Ø Max. Max. product length 1200 mm Speed 18300 Rpm Max. grinding angle 45 - 120 ° Max. workpiece weight 190 Dimensions (estimate) Length 1250 mm Width 1250 mm Height 1900 mm Weight 365 kg Please note: The information on this page has been compiled to the best of our knowledge and belief by us and, where possible, by the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you review all important details.

Condition: good (used), Manufacturer: Tracto Technik Type: TUBOMAT Year of construction: 1996 Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device Machine mobile and flexible to use Specifications Metric US Standard Max. Product Ø 42 mm Min. product Ø 6 mm Max. Wall thickness 3 mm Max. Bending radius 5 mm Min. bending radius 180 mm Max. Bending length 2000 mm Deburring device Yes Bjdpet Dk Ukjfx Alcolh Sage device Yes Flanging device Yes Dimensions (estimate) Length 3500 mm width 1000 mm height 1200 mm weight 1000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Bedpfx Alerx Rxtjcelh Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Lubrication Completely overhauled in 1994 Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Width 2200 mm Height 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details. Bsdpfewpud Ajx Alcolh

Condition: good (used), Year of construction: 2001, grinding length: 650 mm, grinding width: 525 mm, total height: 350 mm, table length: 600 mm, table width: 350 mm, Manufacturer: Geibel & Hotz Type: FS 635-Z SA Control: Digital read out Year of construction: 2001 Magnetic table 600 x 350 mm Closed housing for CE Automatic vertical lubrication SA Automatic lubrication Coolant tank Specifications Metric US Standard X - axis 650 mm Y - axis 525 mm Z - axis 350 mm Table length 600 mm Table width 350 mm Blodjvdal Aopfx Alcjh Table load 400 Feed X - axis 35000 mm/min. Feed Z-axis 1000 mm/min. Grinding stone dimensions 300 x 50 x 76.2 mm Power output 3.7 kW Speed 2800 ? rpm Dimensions (estimate) length 3200 mm width 2000 mm height 2870 mm weight 2300 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Bledovvvw Eepfx Alcjh Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2010, travel distance X-axis: 14,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, total width: 5,000 mm, total height: 4,900 mm, total length: 22,000 mm, table length: 14,000 mm, table width: 2,000 mm, table load: 50,000 kg, FP model, ideal for a wide range of applications involving medium to large-sized components. Floor-type milling and boring machine - High dynamics with traverse speeds up to 35 m/min - INA linear guideway system - Hydro-mechanical clamping slides - Orthogonal milling head enables machining at any desired angle Technical data: - X-axis travel: 14,000 mm - Y-axis travel: 2,600 mm - Z-axis travel: 1,500 mm - Table length: 14,000 mm - Table width: 2,000 mm Bedpfovn S E Nex Alcjlh - Table load capacity: 50,000 kg - Spindle power: 43 kW - Spindle speeds: up to 5,000 rpm - Spindle taper: ISO 50 / BT / MK - X-axis feed rate: 35,000 mm/min - Y-axis feed rate: 35,000 mm/min - Z-axis feed rate: 35,000 mm/min - Automatic orthogonal milling head positioning: 1° increments - Operating hours: 3,500 h - Machine length: 22,000 mm - Machine width: 5,000 mm - Machine height: 4,900 mm - Machine weight: 31,000 kg

Condition: good (used), Iijima’s excellent, high-speed JF-1030, manufactured in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting unit adapted to be compatible with/for Bobst die-cutting blades and mounting strips. Sector segment driven by a dual set of bevel gears instead of the previous triple system. Smoother and vibration-free, improved operation of the gripper carriages. Chains renewed in May 2023. Gripper carriages have been repaired where necessary, but not replaced; current tolerance on front registration for rigid cardboard types < 0.15 mm. Engagement clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all rolling bearings on this shaft, including those in the oil casing just before and after the worm gear. Oil seals replaced. Oil casings flushed and thoroughly cleaned in preparation for conversion from mineral oil to full synthetic oil. Absolutely no foaming, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be supplied including installation, transport, and warranty. Other specifications as per the factory brochure. Technical Specifications – Flatbed Die Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout ⸻ Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm Bjdpfx Aox Ndu Djlcelh ⸻ Performance • Maximum cutting pressure: when running max. sheet size • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable • Normal cutting rule height: 8 – 12 mm ⸻ Pile Data Feeder pile • Height (incl. pallet): 1,200 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,080 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg ⸻ Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg ⸻ Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min ⸻ Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment: welded steel construction DURMA CNC control unit (AURORA) Remote control diagnostics (Ethernet) Lantek Software W / Automatic Nesting Position determination of the sheet metal to be cut by laser DURMA Burner height control Double-sided drive system (rack and pinion) AC servo motors for X and Y axis movement CNC control outputs/inputs for the filter unit Consumables Starter-Kit Blsdpjfiqgrofx Alcjh Plasma torch * Ignition console * Burner height regulation with Ball screws on double Linear bearings * Special equipment: Hypertherm Max Pro 200 + hose package + nozzles + Durma THC + torch Hypertherm HPR 130 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm HPR 260 XD + hose package+ nozzles + Durma THC + ignition console + burner Hypertherm + Hypertherm HPR 400 XD + hose package + nozzles + Durma THC + ignition console + burner CE Standard Safety wire Automatic gas console for Hypertherm, Manual gas console for Hypertherm, Autogenous cutting torches Plasma torch protection system manual plasma angle cutting head, CNC angle cutting head (+/- 45). Single drilling head Multiple drilling head Filter for 130A, 260A or 400A Pipe cutting unit Ø50 mm - Ø400 mm Additional support for the pipe cutting unit Warning lamp for error and program end With over 60 years of experience

Condition: ready for operation (used), Year of construction: 2012, Available immediately, ex works: Three-roll round bending machine AK – Bend Type ASM 140 – 20/4 Blodpfx Alszarccecsh Year of manufacture 2012, few operating hours Bending length 2050 mm Sheet thickness 4.5 mm Edge bend 4 mm Roller diameter 140 mm Smallest diameter 210 mm Weight 1530 kg Center rollers driven by electric motor Top roller can be swung out laterally Main motor with braking device Conical bending device Mobile control panel with foot pedal Motorized rear roller adjustment Digital display for rear roller Induction-hardened rollers Price: Euro 4,500.00 plus VAT, ex works.

Year of construction: 2024, condition: new, Control unit - with NC control Conical bending device Side roll positioning electronically synchronized via PLC Safety mechanism for welding (welding possibility) on the machine Machine body made of stress-relieved annealed steel 4 roll drive system - upper, and lower roller with hydraulic motor driven synchronized via planetary gear (ᐳ 430 mm) Electrical and hydraulic protection against overloads Hydraulically adjustable lower roller pressure Hydraulic roller brake, prevents the sheet from slipping back Hydraulic swinging out of the upper roller bearing, for easy removal of the formed sheet Safety wire Induction-hardened rollers (HRC 54), crowned ("crowning"). Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Top roll: 230 mm Bottom roll: 210 mm Maximum roll width: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg Bsdpodzzyfjfx Alcelh

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m Bljdpfx Aleu Icdyscjh weitere Merkmale: 2x Biegewalzen: -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm *

Condition: used, Year of construction: 1997, Technical details: sheet width: 3050 mm plate thickness: 16 mm pre-bending: 12 distance between columns: 5200 mm roll dia. top roll: 330 mm roll dia. bottom roll: 360 mm Bedjyh D Nnjpfx Alcjlh Total power requirement: 15 kW weight of the machine ca.: 18,0 t dimension machine xH: 5,3 x 2,4 x 2,0 m

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite Bodpfx Aljnzt A Hocelh - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition Bedpofbt Huefx Alcslh

Condition: used, Year of construction: 1998, Used DAVI 4-Roller Plate Bending Machine MCB 2020 Technical specifications: Year of manufacture: 10/1998 Manufacturer: DAVI Sheet working width: 2000 mm Sheet bending thickness: 10 mm Pre-bending thickness: 8 mm Roll length: 2050 mm Connections: 400V / 50Hz / 10 HP Power: 4 kW Surface-hardened 4 rollers Bsdpey I Uh Sefx Alcolh Variable bending and rolling speed Safety device with emergency stop switch Digital display of the 4-roller positions on the screen

Condition: excellent (used), functionality: fully functional, TAURING PROFILE BENDING MACHINE DIAMETER 40 MODEL: ALFA 40 R Bedpfx Alsyv Hrxecjlh USED MACHINE INTERNAL CODE: SVR 399

Condition: used, SOMO PRESS BRAKE 4000 X 40 Bedpfx Aszbb Tyslcelh USED MACHINE INTERNAL CODE: SVR 002

Condition: ready for operation (used), Year of construction: 1994, sheet width 2550 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 7.5 kW weight 4500 kg range L-W-H 5000 x 1500 x 1300 mm Bjdpfxsy Ez A Rj Alcolh Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 2900 € 1270 mm Bjdeynndrspfx Alcjlh 1.2 mm 68 mm 1.5 kW 1610 mm 700 mm 1160 mm 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4900 € 109.71 € 1050 mm 3 mm 2 mm 90 mm 2080 mm 700 mm 1250 mm 410 kg Bjdpfxewirv Ns Alcolh 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Bjdpfx Alewkaaljcslh