Used Realmeca T400 for sale (139)

Condition: like new (used), Year of construction: 2009, functionality: fully functional, Planer machine with two cutters, lower and upper. Ledpfx Aeufr H Askwoah

Condition: good (used), lifting height: 38,260 mm, fuel type: diesel, General information Year of manufacture: 2016 Weights Empty weight: 16.100 kg Functional Lifting capacity: 600 kg Working height: 4.026 cm Dimensions of cargo space: 974 x 253 x 378 cm Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 3108 m Max swing of platform in degrees: 250 Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 400 Year of build: 2016 Condition: Used Data: Max. working height: 40,26 m Max. platform height: 38,26 m Max. reach: 31,08 m Total dimensions LxWxH: 9,74 x 2,53 x 3,78 m Platform dimensions LxW: 2,41 x 0,97 m Max. basket load: 600 kg Swivel range: 250° Ground clearance: 0,22 m Support width both sides: 6,60 m Support width one side: 4,77 m Support width: narrow 2,86 m Support length: 6,37 m Ground pressure: 150 kN Driving license category: C / 2 Lajdpfx Akeyvzy Dewjh Empty weight: 16.100 kg Total permissible weight: 18.000 kg Special features: Tilt 2°, Rotatable work basket 2x 90° (hydraulic), Basket arm, Rotation angle 180°, WITHOUT roof protection, Loading area with side panels, Telescopic basket arm allows working over obstacles, Computer-assisted stabilizer automation, PPE attachment points available, Material box 1.81 x 0.81 m. Information: TÜV and UVV new

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 31-4002022, Manufacturer: PFM Model: Robot 400 Year: 2022 Condition: New Serial number: 31-4002022 Laodpfoz Hu H Tjx Akwjh Stock number: 2447 Heating: gas, 28 kW Burners: 14 units Capacity: max. 400 kg Spit diameter: max. 700 mm Spit height: max. 1150 mm Power: 220V, 50Hz, 1.5 kW Dimensions: 1200 x 1250 x 2350 mm

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 550 mm, spindle bore: 77 mm, turning diameter over bed slide: 800 mm, GURUTZPE lathe model Super AT 400/6000, 6,000 mm between points, turning on bed 820 mm, on carriage 550 mm, shaft diameter 76,5 mm, 16 speeds from 9-500rpm, has fixed rear Steady , , has 4 independent claws chuck diameter 800mm, , very good condition in general Laodpfswd D Itox Akwoh

Year of construction: 2012, condition: used, Operational condition PCB cleaning unit. Several available. Lajdpfxsyup Sde Akweh Ask for photos and pricing

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Ljdpfsxytmhjx Akwjah Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- The machine renovated and functionally checked ! Short summary: ----- 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ----- Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ----- Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm Axial adjustment range: 5 mm Rebating device MarathonCoatin for table insert in front of 1st lower tool holder 2. Tool holder - PowerLock - right ----- Motor with brake: 11.0 kW Common motor with left tool holder Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Ledsuzaa Sspfx Akwjah Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max. tool diameter behind stop level: 180 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 3. Tool holder - PowerLock - left ----- Motor with brake: Common motor with the 2nd spindle Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 4. Tool holder - PowerLock - above ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max.: 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Radial CNC-controlled spindle 5. Tool holder - PowerLock - above ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max. : 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Spindle axially and radially CNC controlled 6. Tool holder - PowerLock - below ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Max throat depth: 15 mm Axial adjustment range: 35 mm Radial CNC-controlled spindle feed system -----...

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 15 h, load capacity: 1,600 kg, lifting height: 5,400 mm, free lift: 1,870 mm, fuel type: electric, mast type: triplex, construction height: 2,360 mm, fork length: 1,150 mm, drive type: Elektro, High-lift stacker Fork width: 180 mm Fork thickness: 70 mm Mast type: Triplex Ledpfx Aszrcthokwsah Condition: As new Technical condition: Good Front tyres type: Polyurethane Front tyres size: Tandem load wheels Rear tyres type: Polyurethane Battery voltage: 24V Battery capacity: 375Ah Battery year: 2022 Battery condition: 80 - 100% Load backrest, Battery compartment rollers DIN160A Schaltbau battery connector Activation via PIN code

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, total length: 800 mm, total width: 4,000 mm, total height: 900 mm, TOP workbench AT 4000 with beech worktop, mobile Stainless steel workbench AT 4000 with beech wood worktop Ledpjykifpjfx Akweah bottom with storage grate drawer unit on the left Dimensions: 4000 x 800 x 900 mm (W x D x H) Used unit, cleaned Top sanded and newly oiled We have more top-quality workbenches in stock!

Condition: used, Comprehensively tested and refurbished, used Winkworth model model RT400 stainless steel high speed ploughshare (T-Arm) mixer. Lajdsymayispfx Akwoh Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2016 Capacity: 400 litre (product dependent) Mixing trough: 1,300mm long x 800mm diameter. Type Of Blades: T-Arm ploughshare blades with drive/gearbox. Specifications: Bowl Volume: 105.7 gal Material Of Construction: Stainless steel Dimensions: 1300mm long x 800mm diameter

Condition: good (used), Year of construction: 2010, Press brake with max. pressing force of 400 tonnes max. working length 5100 mm max. stroke 365 mm Laedpfxsyh T Sre Akwjh 34 kW Total weight 38 tonnes

Condition: used, Comprehensively tested and refurbished, used Winkworth model RT400 321 stainless steel high speed ploughshare (T-Arm) mixer. Manufacturer: Winkworth Lodpsymazgjfx Akwjah Material: Stainless Steel (321) Capacity: 400 litre (product Dependent) Mixing Chamber: 1,300mm long x 800mm Diameter Type Of Blades: T-Arm Blades Motor: 5.5kW Motor and Gearbox Also Includes: External Mild Steel Jacket Provision for One Chopper but None Currently Fitted. Specifications: Bowl Volume: 105.7 gal Motor Power: 5.5 hp Material Of Construction: Stainless Steel (321) Choppers (Y/N): No Jacket (Y/N): Yes Dimensions: 1300mm long x 800mm Diameter

Condition: reconditioned (used), Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- - 5 spindles with 8,000 rpm - 4 x HSK/Powerlock - Axially and radial CNC adjustments of the spindles via control - CNC-controlled adjustment and positioning of the feed - Table tops with guide blades at spindles 2 and 3. - Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Lodpfx Aeyy A Iqokweah Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) wi...

Condition: used, Year of construction: 1989, cutting diameter 260 mm serial number 109967 volt 380 V frequency 50 Hz Laedpfxjpxri Us Akwjh weight of the machine ca. 500 t

Condition: excellent (used), Plastic silos From Colortronic dryer Ljdpfjwydrqjx Akweah Volume: 400 and 200 L Price: 500 EUR per unit Price for 3 units: 1,200 EUR!!!

Condition: used, Kompleksowo przetestowany, używany mieszalnik lemieszowy produkcji Winkworth (Anglia) model RT400 wykonany ze stali kwasoodpornej AISI 316. Materiał: stal kwasoodpornej AISI 316 Pojemność robocza: 400 litrów (w zależności od produktu) Wymiary komory mieszającej: długość 1300 mm x średnica 800 mm Typ rozładunku: zawór klapowy pneumatyczny, umieszczony centralnie na spodzie Mieszadło: szybkoobrotowy wał z przyspawanymi łopatami w kształcie "T" Ljdpfx Aoykn Shekwjah Silnik: napęd produkcji SEW z silnikiem elektrycznym o mocy 22 kW Dodatkowe wyposażenie: - 1 boczne mieszadło intensywne (chopper - Refiner) napędzane bezpośrednio silnikiem elektrycznym o mocy 7,5 kW, możliwość podłączenia drugiego mieszadła Poniżej dostępny jest link do filmu ukazujący mieszalnik podczas testowego uruchomienia: Specifications: Bowl Volume: 105.7 gal Motor Power: 22 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 10.057 Vacuum Internal (Y/N): N Jacket (Y/N): N Dimensions: 1300mm Long x 800mm Diameter

Condition: defective spare-parts repository (used), functionality: not functional, mileage: 102,800 km, fuel type: diesel, empty load weight: 2,685 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, emission class: euro5, suspension: steel, loading space volume: 5 m³, Year of construction: 2014, Equipment: ABS, air conditioning, power assisted steering, Parts donor: + Nissan + NT400 Cabstar + Year of manufacture: 2014 + Euro 5 engine + 102,800 km + Unladen weight: 2,685 kg; GVW: 3,500 kg Laodpfx Aoyx Hthskwjh + Air conditioning + Provence Benne M50 EVO 2 body: press, lifter, tipper + Missing parts: driver's seat; complete gearbox; electrics; engine control unit; etc. + Without registration documents Receive all newly listed vehicles via email – sign up for our NEWSLETTER! Errors and omissions excepted, interim sale reserved!

Condition: ready for operation (used), Heidenhain / zentro-elektrik VSNT 400 / 8610-1 Power Supply SN:100647, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Lsdpfox Err Njx Akweah

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head Ljdeg N Nlvepfx Akwjah 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Year of construction: 1997, condition: ready for operation (used), Clamping force: 400kN, heating output: 5.5kW, connected load: 20.5kW, weight: 4.7t, operational hours counter: 18,287h, an inspection is possible. Ledpfx Ajrc Hibokwjah

Condition: used, Year of construction: 2016, operating hours: 4,116 h, 2016 | Isoli PT200 on Nissan NT400 | Used Truck-Mounted Boom Lift | 4116 hours | 55182 kms 📍Location: Lithuania 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Laodpfx Akex Twabowsh 💰 Buy Now for EUR 37100 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 58 inspection points 57 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Two of the probes (shown on photo) had to be replaced 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39378 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Catalog number: 8125 TECHNICAL DATA PLANER: - roller width 410mm - 3-knife roller - adjustable angle guide - table length 1800mm - both tables adjustable JOINTER: - max thickness of workpiece on the jointer 180mm - guard on the jointer roller – from above: - pawls - infeed roller, toothed - planing roller - outfeed roller, smooth – with horizontal drilling machine: - max tool diameter 16mm - max hole depth 120mm - max milling length 200mm - front/rear adjustment with drilling unit - table adjustment up/down and sideways - adjustable roller in the lower table - 2 feed speed options 8/12m/min - main motor 4kW Lsdpfx Ajz Rpl Tokwjah CIRCULAR SAW: - max blade diameter 350mm - max cutting height (for a 300mm blade) 45mm - blade arbor diameter 30mm - blade adjustable up/down - cutting width with guide 350mm - cutting width on the carriage 500mm - table dimensions 1230x530mm - with carriage + miter gauge - blade guard - motor power 3kW MILLING MACHINE: - spindle 30mm - spindle adjustable up/down - spindle height 80mm - guide - rotation right/left - dust extraction nozzle diameter 120mm - dimensions L/W/H 2800x2300x1050mm - weight approximately 1000kg FEATURES – with drilling machine – guard on the jointer roller – very good condition, used machine Net price: 16900 PLN Net price: 3930 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: new, Year of construction: 2026, CKT 400 × 1000 CNC Lathe with Driven Tooling is an advanced CNC turning machine designed for precision machining of metal components in medium and large-scale production facilities. Equipped with the Siemens Sinumerik 808D CNC control system, it provides reliability, high accuracy, and ease of operation, meeting the requirements of modern industrial manufacturing processes. Key Features of the CKT 400 × 1000 CNC Lathe with Driven Tooling The CKT 400 × 1000 CNC metal lathe is a professional industrial solution offering: High machining precision – maximum swing over bed of 400 mm and swing over cross slide of 210 mm, with minimum setting resolution of 0.001 mm on both X and Z axes. Flexible spindle system – spindle speed range of 0–2000 RPM, spindle bore of 52 mm (optional 72 mm), and MT6 spindle taper provide versatility for various machining applications. Intuitive CNC control – Siemens Sinumerik 808D Advanced system with Polish-language interface and Siemens servo drives ensures easy operation and high process reliability. Rigid machine construction – net weight of 2000 kg provides excellent stability during machining of workpieces up to 1000 mm in length. Efficient tooling system – 4-position tool holder with driven tooling (optional 6 or 8 positions), supporting tools up to 20 × 20 mm (optional 25 × 25 mm), enables flexible machining operations. Fast setup and adjustment – convenient tool positioning, work zero setting, and corrections can be performed without writing complete CNC programs. Laodpfx Akjv A S N Deweh Enhanced operator safety – controlled rapid movements and spindle speed limitation allow precise and safe machine operation. Extended component durability – automatic lubrication system for gears and guideways reduces wear and increases machine service life. Optimized cooling system – ensures thermal stability and protects cutting tools and workpieces during intensive machining. Energy-efficient operation – the 5.5 kW main motor combined with 6 Nm X and Z axis feed motors provides high productivity with optimized energy consumption. Integrated machining cycles – supports operations such as facing, taper turning, threading, and drilling by entering basic parameters without requiring advanced G-code programming knowledge. Customizable configuration – available options include Fanuc Oi-TF control, hydraulic chuck, bar feeder, and CAD/CAM software integration. European safety standards – CE Declaration of Conformity Standard Equipment SIEMENS SINUMERIK 808 Advanced CNC control system with Polish-language interface Siemens servo drives Manual lathe chuck 4-position tool holder with driven tooling Complete set of soft jaws Hydraulic tailstock with MT5 quill Coolant system Automatic lubrication system for gears and guideways 24V halogen work lighting User manual CE Declaration of Conformity Technical Specifications Maximum swing over bed 400 mm Maximum swing over cross slide 210 mm Distance between centers 1000 mm Spindle speed range 0–2000 RPM Spindle bore 52 mm (optional 72 mm) Spindle taper MT6 Tool positions 6 + 1 driven tool Maximum tool size 25 × 25 mm Minimum setting resolution (X / Z axes) 0.001 mm / 0.001 mm X-axis rapid traverse 8 m/min Z-axis rapid traverse 10 m/min Tailstock taper MT5 Maximum tailstock quill travel 120 mm Main motor power 5.5 kW X-axis feed motor 6 Nm Z-axis feed motor 6 Nm Packaging dimensions (L × W × H) 2640 × 1500 × 1770 mm Net weight 2000 kg

Condition: new, Year of construction: 2026, functionality: fully functional, 230 V Screw Compressor CORMAK screw compressors are a guarantee of quality and reliability. Our many years of experience in selling compressors have allowed us to develop models offering an excellent price-to-quality ratio. The presented model is ideally suited for small workshops and small manufacturing businesses. It offers a high output of 380 l/min in relation to its compact dimensions, allowing several devices to be operated simultaneously. The very low noise level of 60 dB ensures that working in the same room is comfortable and not disruptive. Thanks to the use of high-quality components, the compressor has been designed for continuous-duty operation and can also be used in industrial applications. THE SET INCLUDES: LUFT 400 screw compressor 150 L horizontal compressed air receiver Are you looking for an efficient and reliable compressor for smaller workshops, service centres or hobby applications, while requiring a single-phase power supply? The CORMAK LUFT 400 screw compressor is the ideal solution. With a 3.0 kW motor and an impressive actual output of up to 400 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. This model, powered by 230 V / 50 Hz, has been designed for continuous-duty operation, making it ideal for demanding applications such as smaller workshops, tyre service centres and craft businesses. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The LUFT 400 features a reliable and robust direct-drive system, eliminating vibrations and the need for belt-drive adjustment. This proven solution ensures stable operation and a long service life by providing direct power transmission from the motor to the screw compressor element. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key compressor information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 400 l/min ✅ Motor power: 3.0 kW ✅ Power supply: 230 V Technical Specifications Parameter Specification Ledpfx Akoza Al Uewjah Motor power 3.0 kW / 4 HP Voltage 230 V / 50 Hz Output at 0–6 bar Average 400 l/min Output at 6 bar 390 l/min Output at 8 bar 380 l/min Output at 10 bar 380 l/min Outlet connection diameter (G) 1/2" Dimensions 1130 × 520 × 1300 mm Weight 170 kg

Condition: like new (used), Year of construction: 2024, Technical data: Sheet metal length: 4,100 mm Sheet metal thickness: 6 mm Stand width: - mm Total power consumption: 15 kW Weight approx.: 11.5 kg Dimensions (L x W x H): 5250 x 2300 x 22150 mm Rear stop: 1000 mm D-Touch 7 touchscreen CNC control, user-friendly, central blade angle adjustment Ball screw spindle, 1000 mm & automatic pivoting Support balls in the table for improved material handling Side stop with scale & T-slot and pivoting stop Support arms with T-slot and pivoting stop Cutting line illumination & 1 m retractable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Pivoting rear stop Lajdpfx Ash Ib T Ujkwjh Cutting line illumination Foot pedal CE standard for EU The machines can be inspected and demonstrated at any time in our showroom in Staufenberg by prior appointment. Additional machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.