Used Pullmax Plate Edge Welding Slanting Machine for sale (73,406)

Year of construction: 2014, condition: good (used), Edge banding machine, edge bander, finishing unit, buffing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, sanding unit, edge banding unit -Handover: in its current condition as inspected Podoz Rxb Rjpfx Akiogu -Accessories: see pictures -Manufacturer: SCM HOLZKRAFT, Edge banding machine type Minimax ME 20 -Minimum workpiece length: 180 mm -Minimum workpiece width: 65 mm -Workpiece thickness: approx. 12 to 50 mm -Edge thickness (rolled edges / strip edges): 0.4 to 2 mm -Feed rate: max. 5 m/min -Adhesive system: Hot melt adhesive granules in the glue pot below -Dimensions: 2000/720/H1235 mm -Weight: 300 kg

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 Pgsdozd Rmgspfx Akisu - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, total power requirement:6,5 kW Pedpfx Ako Ad Siyoiegu dimensions of the machine ca.:0,9 x 0,5 x 1,25 m

Condition: not inspected (used), Stud welding machine Pjdpfx Aksy Ihbxjijgu Manufacturer: NELSON Type: FSE 100 / FSE 500 Includes welding head, hoses, and control cabinet 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Price per unit. Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 1993, Used machine Psdpjzyy Avjfx Akijgu Year of manufacture: 1993 Equipment and technical data:

Condition: new, sheet width 1600 mm Psdpfxoxabkhe Akiegu plate thickness 15,0 mm ST pre-bending 13,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm total power requirement 7,5 kW weight of the machine ca. 4225 kg. dimensions of the machine ca. 4000 x 1300 x 1440 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 3100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 230 mm side roll diameter 210 mm diameter of lower rolls 190 mm total power requirement 7,5 kW weight of the machine ca. 6.020 kg. dimensions of the machine ca. 5142 x 1390 x 1300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes Pgsdexabm Aopfx Akieu - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 3100 mm plate thickness 16,0 mm ST pre-bending 20,0 mm ST diameter of upper rolls 360 mm side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 15,0 kW weight of the machine ca. 13.200 kg. dimensions of the machine ca. 5542 x 2100 x 1983 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) Pgsdexabzaepfx Akieu - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 2100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 190 mm Pedpfsxab E Eex Akiogu side roll diameter 150 mm diameter of lower rolls 170 mm total power requirement 3,0 kW weight of the machine ca. 3.290 kg. dimensions of the machine ca. 4042 x 1380 x 1254 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 4100 mm plate thickness 8,0 mm ST pre-bending 6,0 mm ST diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 7,5 kW weight of the machine ca. 9.930 kg. dimensions of the machine ca. 6532 x 1730 x 1489 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing Pedpfx Akjxab Tceijgu - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, sheet width 4100 mm plate thickness 13,0 mm ST pre-bending 10,0 mm ST diameter of upper rolls 360 mm Pgjdpfoxabuyox Akiju side roll diameter 250 mm diameter of lower rolls 330 mm total power requirement 11,0 kW weight of the machine ca. 16.000 kg. dimensions of the machine ca. 6542 x 1677 x 1900 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Pgodpjlht Hzefx Akiju Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: new, Year of construction: 2026, Hebrock F 4 For the complete processing of your panels For those who don’t want to compromise. With the F 4, we offer you a model that allows you to produce completely finished edges on a machine length of only 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm PLC control with 10″ touchscreen Top-mounted rapid heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner router) Optical display for workpiece sequence Outrigger (extendable to the front) Pgsdpshqadcsfx Akisu Quick-change unit preparation, including glue change device for PUR processing Surface scraping blade with dual contact Pneumatic roller capping (scissors-type design, Hebrock system) Double roller pressure (ball-bearing mounted) Transport chain with permanently screwed-on special chain plates Edge router Routing unit Miter saw Corner router Accessories: F4/09 Radius scraping blade (incl. pneumatic lift) F4/09/4 Multi radius scraping blade (R1/R2) F4/30 Pneumatic 3-point adjustment Location: In stock, 54634 Bitburg - available on short notice -

Condition: used, MERKLE Insquare W 300 AC/DC Welding Machine with original hose set Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Pgjdpjl Sm Hbefx Akieu Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A Electrode Welding: Electrode diameter: 1.5-6 mm Open-circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding Processes: 10-stage switch: TIG DC Negative, TIG DC Positive, TIG DC Negative with start pulse, TIG AC low-noise, TIG AC Rectangular TIG AC "Balanced TIG", Electrode Negative Electrode Positive Electrode "Sinusoidal" Electrode Rectangular Selector Switch 1: 10-stage switch: Current 1, Time 1, Ramp-up and ramp-down time, Starting current, ending current, Ignition pulse, point time, Pre-gas and post-gas time Selector Switch 2: 9-stage switch: Current 2, Time 2 (for pulse operation), AC balance, AC frequency, Hot start time and current, Current adjustment, Electrode diameter, display U Settings: 2 potentiometers for selector switch 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: 4-stage switch: OFF, Slow pulsing, Fast pulsing, Spot welding Ignition: 4-stage switch: OFF, High frequency, Lift-TIG Energy control: 4-stage switch: on the unit, Hand or foot remote control, Welding torch Operating mode: 4-stage switch: 2-stroke, 4-stroke, 4-stroke with 2 currents, Gas test, Test, Program Program memory: 20 memory locations freely assignable AC frequency: 50-200 Hz AC balance: 9-91 % Pre-gas time: 0-3 s Post-gas time: 0-25 s Current rise time: 0-2 s Current fall time: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Slow pulsing: 10 ms-2.5 s Fast pulsing: 50 Hz-5 kHz Hot start time: 0-1.5 s Hot start current: 10-200 % Current adjustment: 100-250 % Button: Test protection device Button: Program selection LED: Power ON, Over temperature, Fault, Protection circuit, Display hold, Start current Rise, Current 1, Current 2, Fall, End current Power source: IGBT inverter Ignition: High frequency or Lift-TIG Standard: EN 60974-1 "S" / CE Torch connection: EURO central connection with 5-pin connector Torch cooling: Water circulation cooling system Socket 50 mm²: Workpiece cable Socket 50 mm²: Electrode welding cable Power connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder Gas bottle holder: 10 - 20 - 50 l gas bottle More items - new and used - can be found in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2010, machine/vehicle number: 235654, Offer 26284 Technical data: - Inverter DC welding machine for MIG-MAG – Pulse – Standard – and - E-hand (stick) welding Pgsdpfs Afwylox Akiou - Welding current 330 A 25% ED - 250 A 60% ED - 210 A 100% ED - Welding current continuously adjustable from 5 to 330 A - Wire diameter steel – stainless steel – AL 1.0 / 1.2 mm - Program control M3-10 with 4 main welding programs - Digital display for welding voltage, current and parameters - Adjustable parameters: wire feed speed m/min, welding voltage correction - Dynamics, wire burn-back time, gas post-flow time, etc. - Wire feeder Drive 4 L P with 4-roller drive and program control - Roller wire feed continuously adjustable 0.25 - 24 m/min - 2-cycle + 4-cycle regulation + special functions, spot welding - Water-cooled hose pack approx. 4 m - Ground cable - Pressure regulator - Intermediate hose pack machine – separate wire feeder case 5 m - Connection 400 V - Space required approx. W 500 x H 1350 x D 1050 mm - Weight approx. 200 kg

Condition: used, Dimensions: 2800 x 1200 mm Height: 850 mm Pgsdj Adpuyspfx Akisu

Condition: good (used), Used horizontal boring mill/drilling machine by Cornac Type BS 65 Spindle diameter 65 mm Table dimensions approx. 600 x 1000 mm Podez Iarqepfx Akisgu X / Y / Z = 1000 / 800 / 650 mm

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edgebanding machine F5 Next With PLC control (including touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation including glue dispensing device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (including pneumatic feed), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Chassis F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge Pedpfelht Hwox Akisgu F5/27 Nesting for cutter and radius pull blade F6/28 Spray texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock, 54634 Bitburg - available immediately -

Condition: good (used), Year of construction: 2009, machine/vehicle number: 00273444, Offer 26285 Technical specifications: - Water-cooled WIG – DC welding machine, mobile - Welding current continuously adjustable with digital display - min. 5 A to max. 350 A, 100% - Maximum connection power 24 kVA - Mains connection 400 V - Includes: - SYNERGIC control with up to 256 programmable welding tasks - 2-cycle – 4-cycle setting - HF ignition and Liftarc - Gas pre-flow control, etc. - 8m hose package, lightweight version - Ground cable - Pressure reducer - Space requirement approx. W 510 x H 990 x D 990 mm - Weight approx. 150 kg Pgjdpfx Ao Adp T Nokisu

Condition: used, Year of construction: 2008, Edge banding machine Manufacturer: IMA Type: Advantage 60 Year of manufacture: 2008 Technical data - Feed speed: 16 m/min - Workpiece thickness: 8 - 60 mm - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Edge thickness: 0.3 - 8 mm - Edge height: 12 - 65 mm - Edge length: 160 - 350 mm - Joint milling unit - Air blow nozzle for removing loose particles - Workpiece preheating - Glue application unit - Cross-cutting saw unit - Multi-function milling unit for milling and rounding corners Podpfx Asz Tf E Uekiogu - Profiling blades - Cleaning agent spray system (Riepe) - Surface finishing blades - Brush unit - Groove milling unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft businesses. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: grooving cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; grooving cutter (incl. diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation incl. glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (incl. pneumatic lifting mechanism), finishing station, robust chain drive, ball-bearing double roller pressure pad, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Undercarriage F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for milling cutter and radius pull blade Pgjdpfx Aei Anadokiju F6/28 Spray for texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock at warehouse 54634 Bitburg Immediately available - in stock.

Condition: used, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Table size: 960 mm x 350 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Oscillation: yes Pedpfxezq Dczj Akijgu Tilting sanding unit: yes Extraction port: 120 mm Motor power: 3 kW Machine length: 1910 mm Machine width: 840 mm Weight: 330 kg

Condition: used, functionality: fully functional, Year of construction: 1984, Max. bending length: 3150 mm; Max. sheet thickness: 16 mm; Min. inner diameter of rolled tube: 550 mm; Rolling speed: 7 mm/min; Roll adjustment speed: 2x22 mm/min; Machine dimensions (L x W x H): 7900x1930x2500 mm; Machine weight: 46,800 kg. Pgedpexxvlkjfx Akisu

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec Pgsded R Ev Djpfx Akisu • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: new, sheet width 3100 mm plate thickness 13,0 mm pre-bending 10,0 mm diameter of upper rolls 300 mm side roll diameter 210 mm diameter of lower rolls 270 mm total power requirement 11,0 kW Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function * digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers Pgedpfsxabflex Akisu - CE mark + declaration of conformity - Operation manual