Used Massey Ferguson 7485 Dyna-Vt for sale (642)

Condition: good (used), Capacity 5000 kg. There is 2 pieces. Bodozlaiajpfx Anuowr

Condition: excellent (used), Vötsch Shock Test Chamber Here we offer you a Vötsch shock test chamber. Water-cooled Temperature range: -80°C to +220°C Warm chamber: +50 to +220 Intermediate chamber: -10 to +90 Cold chamber: -80 to +70 Supply voltage: 400V ±10% 3/N 50Hz Rated current: 30.5 A Rated power: 13.5 kW Refrigerant VK: R 404A 3.00 kg p*: 25 bar Refrigerant TK: R23 15 bar p*: 25 bar Condition: used Type: VT 7012 S3 For your security as a buyer, please note the following information: Bwjdpfx Anezd Uzujuor The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Here we offer a Heraeus Vötsch temperature control chamber. Heraeus Vötsch temperature control chamber, water-cooled Test chamber volume: 110 liters Test chamber dimensions: Width 560 mm, Depth 350 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1030 mm, Height 1640 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Temperature gradient: 1 to 3 K Temperature change rate (cooling): 3.2 K/min Temperature change rate (heating): 3.5 K/min Refrigerant: R-404 A / R 23 Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 1.8 kW Rated current: 12 A Type: VT 7011 For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Bwjdpjzdtd Iofx Anuer Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: excellent (used), Vötsch Temperature Shock Testing Chamber Type: VT 7012 S2 Manufacturer: Vötsch Industrietechnik GmbH Design: Water-cooled For sale is a two-chamber temperature shock testing chamber from Vötsch, designed for rapid temperature change tests. Suitable for industrial, automotive, aerospace, as well as research and development applications. Temperature Ranges: Hot Chamber: +50 °C to +220 °C Cold Chamber: -80 °C to +70 °C Temperature Data: Temporal temperature deviation: ±1 K Spatial temperature deviation: ±2 K Heating rate, hot chamber: approx. 11 K/min Heating rate, cold chamber: approx. 2 K/min Cooling rate: approx. 3 K/min Bwedpfx Aey Iyuwjnusr Test Chamber: Volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable entry: Ø 67 mm Electrical Data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerant: R404A: 2.9 kg R23: 1.27 kg Pressure Data: ND max.: 22.5 bar HD max.: 25 bar Dimensions: approx. 930 x 2115 x 1970 mm Weight: approx. 1000 kg Equipment: Two-chamber shock testing system Digital control Program operation Observation window Cable entry Condition: Used Optical condition as shown in the pictures Normal storage and usage marks present Scope of delivery: Vötsch VT 7012 S2 temperature shock testing chamber Accessories as shown in the pictures Important Note: All information has been provided to the best of our knowledge based on the pictures, nameplates, and manufacturer information. Shipping is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by phone.

Condition: good (used), Here we offer a PINK vacuum drying oven. PINK vacuum drying oven Space requirements for operation and maintenance: Bwjdpfszdi Ivjx Anuor Width min. 3000 mm Height min. 2500 mm Depth min. 2500 mm Dimensions of the vacuum drying oven: External dimensions: Width approx. 1170 mm, Depth approx. 1380 mm, Height approx. 1615 mm Overall height 1970 mm Internal dimensions: Width approx. 360 mm, Depth approx. 735 mm, Height approx. 300 mm Volume of vacuum chamber 79 liters Operating temperature min. 20 °C, max. 150 °C Electrical connection: Supply voltage 3 x 400 V; 50 Hz, N / PE, 8.5 kVA Heating power 6 kW Cooling power 6 kW at 15 °C medium temperature and 15 °C cooling water temperature Heating: Floor, ceiling, side walls and door, double-walled; heat transfer medium flows through Heat transfer medium: Heat transfer oil Mobiltherm 32, filling quantity approx. 20 liters, depending on the length of the pipeline Compressed air: Pressure 6 bar Nitrogen N2: Pressure Nitrogen N2 pressure Permissible operating overpressure: Vacuum chamber -1 / +0.1 bar Heating system 3 bar Weight: 300 kg Type: PINK VT 300-600-300-1 Condition: used Scope of delivery: (PINK VT 300-600-300-1, operating manual) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Year of construction: 2021, controller model: 15" Touch B Panel PC, _____ Description: Year of manuf. : 2021 Control : 15" Touch B Panel PC Working length : 1530 mm Pressing force : 400 kN Technical Specifications Bsdjzkxkmspfx Anujwr Machine Type:Press Brake / Robotic Bending Cell Year of manufacture:November 2021 Operating hours:655 h Number of bends:18,337 Max. pressing force:400 kN Working length:1,530 mm Column width:1,530 mm Max. stroke:200 mm Distance between table and ram:400 mm Working height:975 mm Max. working speed:25 mm/s Machine weight Features Control:15" Touch B Panel PC (touchscreen) Angle measurement system Robot:KUKA 6-axis robot KR12R1810 / ME-30-60-60 Robot payload:12 kg Rear stop:5-axis (X1, X2, R, Z1, Z2) made of aluminum Gripper system:Combination gripper (equipped with six suction cups and a clamp) Safety system:Iris Lazersafe (bending line safety) Cell protection:Protective fence with electrically controlled access door

Condition: like new (used), functionality: fully functional, Ferwood Code: RS0003616 - Manufacturer Code: 2-083-02-7120 - Condition: As new (display item) - Functionality: Fully operational - Compatible Machine: - Weight: 2.5 kg - Dimensions: 36x26x21 cm - If interested, we offer an overhaul service; please contact us. Bodeyz T Ttopfx Anujwr

Condition: used, functionality: unexamined, Ferwood Code: RU0011677 - Manufacturer Code: VT 3.40 - Condition: Used - Functionality: Not tested - Compatible Machine: - If interested, we offer an overhaul service; please contact us. 38KG - 70X46X34 Bodeyb R Tvspfx Anujwr

Condition: new, Rexroth VT-SRXX analog amplifier, model VT-SR11-12/11/4WRD32-5X, unused, in opened original packaging, 100% functional. Bwsdpfx Anji Ec A Eouor

Condition: new, Rexroth VT 11132-11 MNR: R900030647 module, serial number: 18000102RS (0), unused, in sealed original packaging, 100% functional, scope of delivery as per photos. Bodox Eubyspfx Anuewr

Condition: new, Rexroth VT-DFP-A-21/G24K0/0/V Proportional directional control valve MNR: R900703811 ,unused, 100% functional, scope of delivery as per photos Bwjdpfsulqiqsx Anuer

Condition: good (used), Year of construction: 2015, functionality: fully functional, turning length: 650 mm, turning diameter: 400 mm, Fanuc Oi-TD control 3-jaw chuck diameter 250mm 12-fold revolver tail stock Bsdpovi Haqofx Anuewr chip conveyor The machine has only 4051 switch-on hours Technische Daten: / technical details Schwingdurchmesser / rotary diameter 650 mm Drehdurchmesser / turning diameter 400 mm Drehlänge / turning length 650 mm X-Weg / X-travel 230 mm Z-Weg / Z-travel 650 mm max. Drehzahl / max. spindle speed 4500 UpM /rpm Anzahl der Revolverplätze / number of tool places 12 Antriebsleistung Spindel / drive capacity spindle 11/15 kW Gewicht ca. / weight ca. 5400 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, functionality: fully functional, power: 37.4 kW (50.85 HP), fuel type: diesel, color: orange, Year of construction: 2021, operating hours: 1,400 h, Hamm HD14 i VT combination roller Year of manufacture 2021 1400 operating hours 3795-5250 kg 37.4 kW 2400-3320 kg Edge cutter wheel Bwjdpfjzmf Nzex Anuor Cab with doors Heated seat 140 cm working width

Year of construction: 1999, condition: used, We offer this used Vötsch VT 7100 climate chamber, year of manufacture 1999. Device number: 59566005700010 Year of manufacture: 1999 Refrigerant: R 404A Refrigerant charge: 4.2 kg Permissible operating overpressure: 25 bar Stand pressure: 70 bar Voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated output: 11.5 kW Rated current: 22.0 A Wiring diagram no.: EPL 66912 Bwsdpfoyu Hwqjx Anujr System diagram no.: RPL 67612041W If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2008, turning length: 1,609 mm, spindle bore: 110 mm, travel distance X-axis: 335 mm, travel distance Z-axis: 1,609 mm, spindle motor power: 26,000 W, rotational speed (max.): 2,100 rpm, total height: 2,100 mm, total length: 3,800 mm, total width: 2,100 mm, CNC Lathe with c-axis VIPER - VT-33LMBC MACH-ID 9473 Make: VIPER Type: VT-33LMBC Control: Fanuc 21iTB Year: 2008 Tooling holders included Live driven Axiaal tools included  Live driven Radial tools included Chip conveyor Tool eye arm Motorized Tailstock 3 chuck 400 mm with extra2008 jaws Max. turning Ø: 780mm X-Axis: 335mm Z-Axis: 1609mm Bodpfxoyw Ii Uo Anuswr Spindle bore: 110mm Speedrange: 2100Rpm Spindle power: 26kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:4.5kW Chip conveyor: yes Tool eye: yes Pinole taper: 5Mk Stroke pinole: 110mm Quill Ø: 100mm Length: 3800mm Width: 2100mm Height: 2100mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, This listing is for the Bambi VTS 150D Oil Free Dry Air The unit is in full working condition and ready for immediate use. Compact and ultra-quiet, this oil-free compressor delivers clean, dry air for sensitive laboratory applications, including analytical instruments and medical devices. Built for reliability and low maintenance operation. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) Bodpsy H Dv Ajfx Anuswr • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Year of construction: 2011, operating hours: 4,500 h, mileage: 134,485 km, empty load weight: 15,000 kg, Operating hours: 4500, First registration: 25.05.2011_____VT 650 Single Year of manufacture 2011 - Kilometers: 134,456 km - Operating hours: 4,260 h - Wheelbase: 3,260 mm - Manual transmission - Sweeping function right - Rear view camera - High pressure system 100 bar/30 L - Spray bar behind suction shaft and high-pressure bar behind the middle sweeping roller - High-pressure lance with 15 meter hose - Convertible to dual operation, storage location: null Bedstrquwjpfx Anujwr

Condition: used, Year of construction: 2018, operating hours: 5,690 h, mileage: 89,600 km, power: 55 kW (74.78 HP), empty load weight: 15,000 kg, Operating hours: 5,690, First registration: 23.02.2018 Carrier vehicle: DB Atego 1324 #WDB96752620163901 Basic equipment VT 651 Exhaust air blower: Control speed variable between 2,400 rpm and 3,500 rpm, suitable for the respective application. Driven by the auxiliary engine via the reduction gearbox and fluid coupling. Gearbox ratio: 1.79:1 Disc brushes: Quick-release brush system with infinitely variable speed up to 200 rpm (controlled from the cab). Suction nozzle: Cast aluminum suction nozzle with a 250 mm inlet opening and tool-free adjustment. Sweeping roller: Quick-release brush system with a nominal rotational speed of 160 rpm. Dust suppression system: Spray nozzles for dust suppression at the suction nozzle(s), disc brushes, and at the vehicle front. Pressadrain water expulsion system. Electrical system: 24 volts. All external wiring harness connections rated to automotive standard IP67. Controls: Main control panel centrally mounted in the cab with Johnston Video Monitor (JVM) provides information on a wide range of sweeping functions and allows download of recorded data. Up to four cameras (optional accessories) can also be monitored on the JVM screen. A separate palm-rest control includes controls for main sweeping functions and is mounted on the door side. Superstructure and hood: The superstructure consists of the debris container and the integrated water tank, manufactured from high-performance stainless steel sheet. The hood is lined with frequency-adaptive sound-absorbing material. The water tank is equipped with baffle plates and filled via a hydrant filling port type "A". A dual, dry-run-protected diaphragm pump runs continuously. Watertight rear door with double locking system and drainage function. Two side access doors on the superstructure. Insertable superstructure floor as a transfer port for use as a street washer. Rear discharge chute, double amber beacons at the rear protected by wire cages. Automatic multi-positional body support mechanism and side-mounted storage compartments as standard features. Special features: - Special painting LA1 2603 deep orange - Water recycling - High-pressure washing system - Hand suction hose - Brush tilt adjustment from cab - Manual water valves in cab Optional equipment: - Side underrun protection left Bwodpfx Aju Ay Tzonuor - Relocated battery box - TÜV approval - Chassis programming - Tachograph inspection and sealing Location: 54595 Prüm

Condition: used, Technical details: x-axis: 120 mm z-axis: 610 mm diameter: - mm measuring range Y-axis: Höhe: 0 - 610 mm weight: 19 kg interface: 2xRS-232C, 2xUSB-A/B total height: 950 mm measuring system resolution capability: 0,0001 mm power consumption: 43 Watt Floor Space WxD: 320 x 330 x H: 950 mm Bedjwa A Hmopfx Anujwr High-precision height measuring *

Condition: good (used), Year of construction: 2006, operating hours: 40,000 h, functionality: fully functional, machine/vehicle number: M086, spindle speed (max.): 1,500 rpm, spindle speed (min.): 15 rpm, spindle motor power: 22,000 W, Vertical turret lathe with CNC Control: FANUC Series 18i-TB Number of turrets: 1 Number of tools stations: 12 Chip conveyor: 3508734 Bwjdpfxstmq Uke Anuer Boring bar holder: dia. 50 mm The machine is still under power.

Condition: new, Year of construction: 2026, Rotary dry vane vacuum pump. Pump completely new. 12 months warranty Marpa Vacuum pump with equivalent characteristics to the Becker VT 4.40 model. Unbeatable prices. Nominal flow: 40 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Bsdsftzd Sopfx Anujwr Any clarification, do not hesitate to contact us.

Condition: excellent (used), mileage: 104,100 km, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, AdBlue, air conditioning, differential lock, electric window regulation, fog lights, trailer coupling, = Additional options and equipment = - Aluminum fuel tank - Power brake booster - Differential lock - High beam headlights - Low noise (quiet operation) - Air suspension - Air horn - Beacon light (rotating warning light) - Reversing camera - Sun visor - Toolbox - Xenon lighting - Power take-off (PTO) = Further information = Axle configuration Front axle 1: Steered Front axle 2: Steered Weights Unladen weight: 29,500 kg Payload: 6,500 kg Bedsy Rfifopfx Anuowr Gross vehicle weight (GVW): 36,000 kg Functional Boom: Telescopic (14 sections) Boom length: 32 m Lifting capacity: 22,000 kg Superstructure brand: FASSI F1150RA.2.28 XHE-DYNAMIC WITH JIB L616 + WINCH CE marking: yes Condition Technical condition: very good Visual condition: very good VOLVO FH 8X4 TRUCK WITH FASSI F1150RA.2.28 XHE-DYNAMIC WITH JIB L616 + WINCH EURO 6 L PACKAGE 480 HP DRIVE 8X4 2x 10-ton front axles with dynamic steering Wheelbase: 510 cm Air suspension Technically permissible gross weight: 36,000 kg Sleeper cab with air conditioning, refrigerator Navigation, telephone, reversing camera, 27MC, line control I-Shift automated transmission Volvo engine brake Indicator lights, air horn Trailer coupling Length of open loading platform: 620 cm, with container locking system Width of open loading platform: 255 cm Loading platform height: approx. 120 cm Toolbox FASSI F1150RA.2.28 XHE-DYNAMIC WITH JIB L616 + WINCH 14x hydraulic extensions Winch BREVINI BWF 3000/SD Total: 6x jibs/outreaches Radio remote control Max. lifting capacity at 7.6 m: 9,000 kg Max. lifting capacity at 17.50 m: 3,640 kg Max. lifting capacity at 31.65 m: 785 kg Max. working height: 36.0 m FOLLOW US NOW ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPANOL

Condition: good (used), centre height 220 mm table diameter 220 mm 250mm - chuck - 3 jaws 80mm passage Can be used vertically and horizontally Bedpfxeu Sbl Re Anujwr Standing tip height 220mm

Condition: new, Year of construction: 2025, This handling device is suitable for safely and stably handling large-area materials with just one operator. The device can be provided as an independent unit to any machine. Bwjdpjw Nh Dzofx Anusr The price-performance ratio is impressive, as the payback period is less than one year. Comprises the following main components (also available individually): • Column stand • Pivot arm • Lifting traverse with controls Technical data VT 1000: Lifting capacity: 1000 kg Max. lifting height: 1295 mm Lifting speed: 4 and 8 m/min Max. rotation radius: 3900 mm Power supply: 400 V / 50 Hz Max. product dimensions: 4000 x 2000 mm² (weight dependent) Overall height: 2990 mm Total weight: 1350 kg Alternatively, we also offer this handling device with a lifting capacity of 500 kg.

Condition: new, Year of construction: 2025, This handling device is designed for the safe and stable handling of large-area materials with just one operator. The device can be positioned next to any machine as an independent unit. The price-performance ratio is compelling, as the payback period is less than one year. Consisting of the following main components: (also available individually) • Column stand • Swivel arm • Lifting crossbeam with controls Technical data VT 500: Lifting capacity: 500 kg Max. lifting height: 1750 mm Lifting speed: 4 and 8 m/min Max. turning radius: 3900 mm Power connection: 400 V / 50 Hz Max. product dimensions: 4000 x 2000 mm² (weight-dependent) Overall height: 3580 mm Overall weight: 850 kg Bwjdpfx Asfi Trbonusr Alternatively, we also offer this handling device with a lifting capacity of 1000 kg.