Used Hüffermann Htm 13.35 Absetzanhänger for sale (122)

Condition: good (used), Feed: Manufacturer: ALBA Tip: AVS 400 Belt straightening: Manufacturer. George Type: SBK 2 Double straightening and feed line!!! With complete documentation!! Hsdjlz I R Rjpfx Aqtjr

Condition: used, Year of construction: 2022, ---- Data: Frame: Stationary Light type: LED Dimensions (L x W x H): 500 mm x 500 mm x 2200 mm Weight: 45 kg Mast type: Manual, vertical Hjdpfx Ajzkzc Sjqter Maximum height: 3.5 m Power: 1 x 320 W Wind resistance: 50 km/h Mains frequency: 50 Hz

Condition: used, machine/vehicle number: 5102, Year of construction: 2014, operating hours: 328 h, Dieses Angebot stellt keine verbindliches Angebot dar und kann Fehler enthalten. Keine Gewähr auf alle Angaben. Dieses Angebot stellt keine verbindliches Angebot dar und kann Fehler enthalten. Keine Gewähr auf alle Angaben. Hsdpfszcbnaex Aqtjr

Condition: used, Year of construction: 2012, operating hours: 4,500 h, CAT POWER GENERATOR/FLOODLIGHT SYSTEM Type: GEP 18 LT Generator 16.5 kVA Diesel 4-cylinder Mast with 6 floodlights 4-point outriggers Hedpfxewb Nhte Aqtjr 80 km/h high-speed Hot-dip galvanized chassis Height-adjustable drawbar Ball head and jaw coupling etc...

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,000 kg, maximum load weight: 31,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ## Chassis – Semi-Tipper Trailer * High-tensile fine-grain steel welded lightweight construction with slight frame offset * Fifth wheel plate with replaceable 2” king pin * 24-tonne 2-speed landing gear, single-side operation, with semi-round base and straight mounting plate * Integrated mudguard mounting system with stone-repellent surface finish * Spray flaps only on last axle * 1 tarpaulin support bar with holder * 1 aluminium ladder approx. 3,550 mm with side mounting brackets * 2 rear towing hooks * Side-mounted tarpaulin bow holder on chassis ## Axles & Suspension * SAF disc brake axles with 430 mm brake discs * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption * Air suspension system * 1st axle as automatic lifting axle, additionally electronically controlled from the truck * Includes forced lowering and traction aid * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust ## Braking System * Dual-line compressed air braking system * Colour-coded pipe routing for easy maintenance * Two non-interchangeable coupling heads at the front * 24 V EBS electronic braking system with front EBS socket * Raise-and-lower valve integrated Note: The trailer may only be operated with towing vehicles ensuring proper ABS functionality. ## Vehicle Stability System * Automatic tipping lowering function with shut-off valve Hodszhgkispfx Aqtsr * Axle load detection via EBS CAN bus signal for display in the driver’s cabin ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via truck EBS system ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights linked to indicators (flashing side lights) * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 2 × 7-pin and 1 × 15-pin front sockets * 2 additional integrated rear LED work lights ## Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * First stage hard chrome plated * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut ## Tipping Body – Steel Tipping Body (HB 400) * High wear-resistant HB 400 steel body construction * Sloped front wall with external hydraulic cylinder mounting * Foldable aluminium protective sheet on right-hand side for sliding tarpaulin * External shovel and broom holder on front wall * Internal access ladder at front wall * Side walls: 4 mm continuous steel * Floor: 5 mm continuous steel ### Rear Door System * “Membrane” tailgate design * Two-piece rear door (50/50 split) * One sliding bolt integrated into right-hand door leaf * External rotary locking system with bottom mechanical locking ## Operating Platform & Equipment * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side

Condition: used, empty load weight: 2,160 kg, maximum load weight: 180 kg, overall weight: 2,340 kg, axle configuration: 1 axle, first registration: 04/2001, total height: 39,000 mm, color: green, Year of construction: 2001, operating hours: 2,737 h, fuel type: diesel, gearing type: other, driver cabin: other, construction height: 2,960,000 mm, Equipment: car registration, low noise, * German device * 1st hand * Condition see photos * Lehmann floodlight unit consisting of power generator and light mast trailer * Original only 2,737 operating hours * Last inspection at 2,700 operating hours Hsdpfepk Awzsx Aqter * Electro-hydraulically controlled telescopic mast * 9.50 m extension height * Lamp holder can be rotated 360° and swiveled 180 * 2 x halogen floodlights 2,000 W each * 4 x halogen floodlights, 1,500 W each * Own diesel generator/power generator with 20 kVA/16 kw * Connected voltage 230/ 400 V/ 50 Hz * 3 x earthed sockets 16 A * 1 x CEE attachment socket 400 V 16 A * 1 x CEE add-on socket 400 V 32 A * All sockets IPX7 * Trailer operation for cars and trucks (ball head and jaw coupling) * Transport height 2.96 m * 80 Km/h approval * All motion drives are identical and can be replaced in a few simple steps * GVW: 2,340 kg * Unladen weight: 2,160 kg. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 1,001 km, first registration: 01/2000, color: white, driver cabin: other, gearing type: other, Year of construction: 2000, Vehicle location: Bovenden, storage box, 2 compartments Body: Esterer tank body for heating oil & diesel with 2 compartments approx. 13,350L (5,950L/7,400L) Dismantled from DAIMLER-BENZ Actros 1831 4x2 with 3,900mm wheelbase! Next leak and functional test in 03/2027! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Hodpfx Aqowqn Rljtjr - .

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 6,750 kg, maximum load weight: 32,250 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,950 mm, loading space width: 2,480 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,670 mm, suspension: air, tire size: 385/65 R 22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. More information Chassis, Saddle, Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpin Curved front end, patented 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Wheel chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarp rod with holder Towing hook at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle, automatic lift axle, including forced lowering and start-up assistance Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Hedpfx Aei Rizfjqtor Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side lights") 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm (without hose connection) Operation via truck auxiliary drive Body Steel side body made of highly wear-resistant HB 400 steel, sloping front wall with externally mounted hydraulic cylinder mount. Shovel and broom holder on the outside of the front wall. Internal access ladder on the front wall. Side walls continuously 3 mm thick, floor continuously 3 mm thick Membrane - rear wall Internal width at the bottom approx. 1440 mm Aluminum rear wall, pendulum-mounted with "double-hinge hinge" and with 2-wing door, split 1/2 to 1/2, at the top with pivoting boom, each with a grain slide per door. Standing platform with access ladder, connection plate for air/electricity and brake with large space for optimal operation. Roller cover on one side for placement on the right side, with central locking on the left side Country of approval/signs Germany Type approval according to EC 2007/46 Body strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: RAL, single color, according to customer's choice Roller cover: RAL 7035 light gray

Condition: new, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, total height: 1,180 mm, Equipment: ABS, Availability: Immediately NEW VEHICLE Kässbohrer Platform Light MEGA SPS 3 # Empty weight 6,100 kg # Fifth wheel load 15,000 kg # Fifth wheel height: 980mm # BPW axles with disc brakes # 1st axle as lift axle Hsdpfx Aqsvm Nm Istjr # Jost support feet 24t # Wabco 4S/2M EBS with RSS # 2 x 7 and 1 x 15-pin electrical connections # 24V lighting system Aspöck # Tires 6 x 445/45 R19.5 branded tires on steel rims # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Over-width device (4x over-width panels galvanized with LEDs + 1x rotating beacon) # 2 stainless steel tool boxes in the direction of travel right & left # 6x2 Jost container locks, retractable # Stake holder mounted on front wall + 20 stanchions (1500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in the frame # 7 x 2 lashing rings 4t on the platform 108 lashing points in the outer frame with 2t each # Side walls 600mm high & removable including depot under the vehicle # Chassis KTL coated and painted in RAL 3020 # Front wall RAL 3020 ----Errors, changes and prior sale reserved! Location: KTH-Trailer GmbH in Goch

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 34,900 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grained steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 20 ft in the center (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container locking mechanism in the longer version 24 tons, two-stage support jacks, single-sided operation With anti-splash flaps according to EC standards Front axle drip tray with 1 1/4 inch drain pipe + 1 1/4 inch shut-off valve, including drip pan, with perforated tread plates, approx. 400 mm wide, left + right between the drip tray and the longitudinal beam 4 hose racks, approx. 4500 mm long (hose box) for hose pipes, 2 x DN 200 on the outside + 2 x DN 160 arranged in the center, at the rear hose box (stainless steel) 300 mm deep, splash-proof, lid (stainless steel) all around with rubber seal, with drain hole at the lowest point, then without lid on the hose pipes 1 stainless steel grounding lug at the rear on the right side of the frame, with international grounding sticker on the frame Climbing steps at the rear right on the underrun protection, at the rear right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide Axles + Suspension SAF disc brake axles Hedpfx Aei Rixksqter Axle/suspension laser-measured for reduced tire wear and fuel consumption Offset axle spacing (combined transport) up to 44 tons total train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activation 3x brake Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving stability system Axle load detection via EBS-CAN bus signal, for display via the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole socket at the front, without connecting cable Operating instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior may occur due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration / signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Acceptance according to ADR, according to 9.1.1.2 of the ADR, EX/II, EX/III / Vehicle registration certificate for the transport of certain dangerous goods (ex.B3) with warning sign on the rear, not valid for substances according to UN 0

Condition: used, mileage: 309,800 km, power: 290 kW (394.29 HP), first registration: 11/2015, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro6, loading space volume: 9 m³, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), * Mixer, year of manufacture 2015, Liebherr HTM 904F * Water tank 500 L * 36t version (8.0/8.0, 10.0/10.0) * Wheelbase 4250 mm * 260 L tank * Rear axle differential lock Hedpeyty Igsfx Aqtor * Leaf spring suspension * Disc brakes * Air conditioning * Sun visor * Air-suspended driver's seat * Electric windows and mirrors * Power Shift transmission * Offroad driving program * Radio * CB radio pre-installation * Daytime running lights * Gearbox oil cooling * Cruise control * and much more * Subject to errors, prior sale and changes

Condition: used, maximum load weight: 120 kg, overall weight: 2,400 kg, first registration: 10/1975, next inspection (TÜV): 10/2023, * Height-adjustable towing device * Front stabilizers Hjdpjxaiwpofx Aqtsr * Rear stabilizers ---Superstructure: Polyma light mast trailer, telescopic mast extendable hydraulically (height of upper light row approx. 9.65m), operating platform maximum height 7.6m, load capacity max. 180 kg/2 persons. Upper light row: 3x2000W each, lower light row: 3x1500W each. Self-regulating AEG synchronous generator/nominal output 20 kW, output voltage 220 V AC, 330 V three-phase current. VW industrial engine type 122/4-cylinder, 4-stroke boxer engine, 1200 cc/27.5 HP. Dimensions (folded): approx. 4000x2100x2850mm. Recorded operating hours: 2,329 h. Sale only to commercial customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. Our General Terms and Conditions (see imprint) are the basis for all purchase contracts, invoices, pro forma invoices, orders, and sales discussions.

Condition: used, Year of construction: 1996, functionality: fully functional, still 3 units available Model: JV 206-700 workshop-tested and newly painted 2.80 kW Hsdpfxexz E Dhe Aqtjr 50 Hz 400 V 960 rpm

Condition: refurbished (used), Year of construction: 2019, operating hours: 7,820 h, load capacity: 4,000 kg, lifting height: 4,500 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 3,040 mm, battery voltage: 80 V, fork length: 2,400 mm, empty load weight: 4,983 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are reconditioned in accordance with FEM-4.004 and the latest safety standards – ensuring maximum quality and safety for you. From the chassis to the battery, including drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and overhauled. ✅ Made in Germany – with responsibility and precision ✅ Rigorous technical inspection ✅ 400+ vehicles available ✅ Worldwide shipping & customs clearance ✅ Service & spare parts at fair prices ✅ Personal support – even after the purchase Test on site now and get expert advice – we will find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Model: Front Loader EFG 540k Drive type: Electric Load capacity: 4,000 kg Year of manufacture: 2019 Operating hours: 7,820 Lift height: 4,500 mm Hodpfxsy Rq N Ro Aqtor Mast type: Duplex Free lift: No Overall height: 3,040 mm Fork length: 2,400 mm Unladen weight: 4,983 kg Load centre: 500 mm Tyres: Solid rubber Model type: EFG 540k Battery type: PzS Voltage: 80 V Battery weight: 1,863 kg Cab equipment: Solopilot control unit Lighting: 2x front working lights Lighting: Rotating beacon Attachment: Sideshift Attachment: Fork positioner

Year of construction: 2021, condition: used, General information Year of manufacture: 2021 New: No Registration number: 41-WBB-3 Serial number: 200210463 Drivetrain Drive: Wheel Hsdpjylyfcefx Aqtjr Make of engine: Kubota Fuel tank: 110 litres Weights Empty weight: 985 kg Functional Extendable superstructure: Yes CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Trime X-ECO LED Light Pole Year of construction: 2021 Engine: Kubota Lamps: 6x 160W LED Height: 8.5m Weight: 985kg Dimensions: 254x139x242cm Very neat machine, two available. Dutch registration.

Condition: used, functionality: fully functional, machine/vehicle number: FN 57xxxx, Year of construction: 2018, operating hours: 6,333 h, load capacity: 2,500 kg, lifting height: 2,900 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,240 mm, fork length: 1,200 mm, empty load weight: 4,717 kg, total length: 2,441 mm, drive type: Elektro, construction width: 1,198 mm, Electric 4-wheel forklift Chassis number: FN 57xxxx Load center: 500 mm ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: AC impulse Condition: Refurbished, no warranty Technical condition: Very good Front tires type: Superelastic Front tires size: SE 225/75-10 Front tires condition: New Rear tires type: Superelastic Rear tires size: SE 18x7-8 Rear tires condition: New Hsdpfx Aqeyxtqaetor Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: Jungheinrich Battery type: PzS Description: serviced, refurbished both technically and visually, UVV safety inspection passed, sold without warranty/liability for material defects Sideshifter, integrated, couplings for 4th function on the fork carriage 3rd valve, 4th valve, rear working lights, front working lights, overhead guard, front windscreen, pulse control, CE certificate, safety light, rear PVC cover, single lever control (Solo-Pilot), panoramic mirror, new tires, battery (manufacturer-refurbished 09/2022) with Aquamatik, matching external charger

Condition: good (used), Mitutoyo Height Master 515-318 Height Micrometer Height Master 515-318 Height Micrometer Measuring range 10-310 mm Reading marks in 0.001 mm increments Quantity: 1 piece For calibrating and adjusting height gauges and marking devices, for example. Mitutoyo supplies a double-block height micrometer with a counter that makes reading faster, easier, and more accurate. The Height Master's gauge block is arranged in two rows, one on the left and one on the right, each with a height interval of 20 mm. Manufacturer price: €4,170 Hodju Egyyopfx Aqtsr Find more items - new and used - in our shop! International shipping costs upon request!

Condition: used, axle configuration: 2 axles, total width: 25,000 mm, total height: 40,000 mm, Year of construction: 2014, Equipment: ABS, For inquiries regarding the vehicle, Mr. Seidel will assist you (by telephone). Hjdpfxeyfu Sdj Aqtor MÜLLER MITTELTAL SF32BM/BT Concrete Mixer Semi-Trailer Superstructure: Liebherr HTM 1004 10m³, BPW axles, drum brakes, spring-loaded brakes, Wabco ABS, 1st axle liftable, air suspension, permissible total weight: 32,000 kg, unladen weight: 6,510 kg, payload: 25,490 kg, tire tread depth: 1st axle 14-15mm, 2nd axle 10mm Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (tel.) is happy to assist you. Further information can be found on our homepage. ... Subject to errors, changes, and prior sale!!! = Further Information = GVW: 32,000 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2023, Side mulcher hydr. side shift PTO Walterscheid without clutch / Hjdpfx Aqet Hd T Ejtjr

Condition: used, Year of construction: 2023, Side mulcher light MBL 200LW PTO Walterscheid. / Hjdpfx Aqothglyetor

Condition: new, Year of construction: 2025, Technical Data / Equipment Straightener: R65/360 • Strip width 30 - 360 mm • Strip thickness from-to 0.6 - 4.0 mm • Strip thickness throughput: max. 4.00 mm • Max. straightening cross-section: 800 mm2 at R02=350 Nmm2 or 150 x 4 mm • Straightening speed: 2 - 20 m/min • Number of straightening rollers: 7 • Straightening roller diameter: 65 mm • Number of draw rollers: 2 • Draw roller diameter: 65 mm • Motor power: 2.2 kW/3x400V RK machine body with a very stable and torsion-free welded construction RZ straightening and draw rollers, made of high-quality steel, surface-hardened and finely ground mounted in maintenance-free roller bearings Hsdpfx Aqjwhfxzotor AG drive, via spur gear motor with Double chain drive EM self-regulating drive, via frequency converter, with WM position measuring system, belt loop control for self-regulating drive, with ultrasonic sensor and sensor in the belt loop RZ straightening roller adjustment, individually manually adjustable and readable via dial gauges RO discharge roller cage, fixed with a radius for 3 mm material thickness PZ pneumatic tension roller adjustment, operated from the control panel BSF-ze belt side guide, manually adjustable centrically and eccentrically by 25 mm SS-2 interface to the press:

Condition: used, Year of construction: 2007, For enquiries regarding the vehicle, Mr. Seidel (by phone) will be happy to assist you. Polyma LA0400185T68W Light Mast Trailer Rated output: 18 kVA, 14.4 kW / 26A, operating hours: 6,367 h We are happy to provide you with a leasing or financing offer upon request. Mr. Seidel (phone) is happy to assist you. Further information can be found on our homepage. Hsdpeyxadgjfx Aqtjr ... Subject to errors, alterations, and prior sale !!! - = Further information = Unladen weight: 1,660 kg Payload: 40 kg Gross vehicle weight: 1,700 kg Please contact Tobias Ebert for further information.

Year of construction: 2022, operating hours: 1,056 h, condition: used, For inquiries about the attachment, Mr. Herden will assist you (by phone). Generac V20 Lighting Tower / 1,056 hours / Year of manufacture: 2022 / In stock & immediately available Price: €12,890.00 net / €15,339.10 gross Year of manufacture: 2022 Operating hours: 1,056 h Engine: Kubota Illuminance: 4 x 300W Low voltage: 48 Volt Lighting type: LED Coverage: approx. 4,500 m² Mast height: max. 8.50 m Runtime: approx. 140 h Noise level: approx. 58 dB(A) Transport dimensions (LxWxH): 2,250 mm x 1,400 mm x 2,436 mm Deployed dimensions (LxWxH): 2,640 mm x 1,900 mm x 8,500 mm Weight: 980 kg Good condition! Ready for immediate use! We have many more lighting towers available from stock! Mr. Herden (phone) is happy to assist you. Hodpfsyl Hg Hex Aqtjr On request, we will be happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Furthermore, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale excepted! Internal No.: 030269 = Further information = New: No Application: Construction Please contact Marius Herden for further information.

Condition: ready for operation (used), A total of 6 horizontal bag sealing machines Joke with vacuum and large container function are available. Seal length: 1000mm, sealing method: impulse sealing, sealing performance: 2x0.4mm, seam width: 6mm-8mm, rail opening: 30mm, throat depth: 153mm, machine dimensions X/Y/Z: approx. 1300mm/1100mm/1950mm. Documentation available. An on-site inspection is possible. Hsdpjw R U Atsfx Aqtsr

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, workpiece weight (max.): 50 kg, total width: 400 mm, total length: 1,200 mm, total height: 1,800 mm, overall weight: 950 kg, Equipment: documentation/manual, The KKT Universal BA & KA balancing machine is a horizontally operating industrial balancing machine for precision balancing with belt drive and cardan shaft drive. It is suitable for balancing motor armatures of various sizes, as well as shafts, fan impellers, grinding wheels, cardan shafts, and similar rotors. We offer this machine in various versions, both as a used machine and as a new machine built to meet customer requirements. Please feel free to contact us - we will be happy to provide you with comprehensive advice and support. Hsdof Sqiqopfx Aqter