Used Gualdoni Gdv-400 for sale (18,605)

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Belt width 400 mm Equipment • drying tower upward • infeed left at the bottom • outfeed 90° at the top Bodpfod Idlaex Ac Tsll

Year of construction: 1997, condition: ready for operation (used), Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible. Blsdpfx Acoua E Txs Tsl

Year of construction: 2020, condition: ready for operation (used), Saw blade diameter: 2x400mm, max. cutting length: 4000mm, cutting angle: +/-45°. Documentation available. On-site inspection is possible. Bsdpfx Acjwfg Hbs Tjll

Year of construction: 1998, condition: ready for operation (used), Volume flow: 13,600m³/h, pressure increase: 3100Pa, rotational speed: 1500/min, motor power: 18.5kW, weight: 790kg, with Chip Container STBB HAB S, including full documentation. Blodpfxei A Ix Hs Ac Tjl

Year of construction: 2006, condition: ready for operation (used), A forming machine Bakel for the food industry, for example for the production of patties, is available. Belt width: 400mm, forming capacity: 50 strokes/min, hopper capacity: 270l, max. forming dimensions X/Y: 370mm/130mm, max. cycle volume: 1.47kg, machine dimensions X/Y/Z: approx. 2500mm/900mm/2600mm, weight: approx. 1200kg. An on-site inspection is possible. Bjdpfx Asw Iqgvec Tell

Condition: ready for operation (used), Year of construction: 1977, Operating hours: 4280h, Track shoe width: 550mm, Track gauge: 1520mm, Track contact length: 2090mm, Undercarriage length: 2080mm, Blade width: 3000mm, Machine dimensions X/Y/Z: approx. 52050mm/1900mm/1850mm, Weight: approx. 10000kg. An on-site inspection is possible. Bsdpfx Aezf Ncvsc Tjll

Condition: ready for operation (used), Year of construction: 2006, A Weber slicer sickle knife grinding machine is available. Control levels: 3, version: CNS, max. blade length: 650mm, grinding angles: 22°/26°/28°/32°, grinding wheel dimensions X/Y/Z: 100mm/40mm/50mm, dressing wheel dimensions X/Y/Z: 50mm/25mm/20mm, blade cutting edge to rotor center distance: 400mm, machine dimensions X/Y/Z: approx. 1100mm/550mm/1800mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Bljdezli Ulspfx Ac Tjl

Condition: ready for operation (used), Fully hydraulic automatic circular saw for workshop and production. The material is clamped by a hydraulic vices. The control offers simple machine operation. The length can be adjusted via a vernier with 0.1 mm resolution. The piece count adjustment The piece count is set by a piece count counter which switches off the machine when the piece count is reached. Blodpfxoiuz Sme Ac Tsl The material feed is carried out via a hydraulic cylinder and ensures the highest cutting accuracy. If you have any questions or need a different cutting range, just give us a call. We would be pleased to show and demonstrate the machines to you. Technical data: Bandsaws KASTO Machine type GKS AU Technical data: Drive power Drive power saw gear. 1,6/2,5 KW Cutting speed 14/28 m/min Cutting range round: 140 mm Cutting range flat: 160x90 mm Saw feed hydraulics Hydraulic Saw blade dimension 425 mm Hydraulic material feed 600 mm Material support. 1050 mm Machine dimensions Length/width 2575x2700 mm Height 1900 mm Weight of the machine 1350 kg Year of manufacture 1987

Condition: excellent (used), Number of paletts 18 Carrying force 25 kg Max. height of workpiece 350 mm Max. diameter of workpiece 230 mm Misc. accessories MARCELS MASCHINEN AG Blodpfx Acsilp Eus Tsl

Condition: excellent (used), Catalog number: 8043 TECHNICAL DATA - inlet width 450mm Blsdpfx Ajzu Sd Usc Tsl - inlet height 250mm - shaft width 530mm - shaft diameter 450mm - blade length 530mm - number of blades 2 pcs - screen dimensions 50x50mm - toothed bottom pulling shaft 2 pcs - bottom shaft motor 0.75kW - toothed top pulling shaft - top shaft motor 0.78kW - main motor 45kW - conveyor belt 0.12kW - belt dimensions length 5150x width 620mm - conveyor belt dimensions 5200x650x800mm - machine dimensions length/width/height 2620x1650x1220mm - weight approximately 2500kg ADVANTAGES – German-made – 5150mm conveyor belt – used shredder, good condition Net price: 65900 PLN Net price: 15690 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: new, 4 – Lathe chuck, unused Diameter: 400 mm Mounting: KK 8 (140 mm) Through-hole: 125 mm Blodpfsd Idnwjx Ac Tel Interchangeable jaws Height: 140 mm Weight: 62 kg

Condition: good (used), Busch Vacuum Pump Blsdpfx Acewa Unpe Tjl Model 400-212

Condition: ready for operation (used), For sale is a Nikken CNC 400 rotary table in very good condition! It is configured for a Mazak M32 control but can be adapted as needed. Table diameter: 400 mm. Dimensions (L/W/H): 740/240/420 mm. If you have any further questions, feel free to contact me. Bsdpfxeya Dtms Ac Toll

Condition: excellent (used), mileage: 759,708 km, power: 294 kW (399.73 HP), first registration: 01/2009, fuel type: diesel, tire condition: 70 %, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel-air, total length: 9,000 mm, total width: 2,500 mm, total height: 3,700 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 8,300 kg, permissible axle load (axle 3): 8,300 kg, Year of construction: 2009, Equipment: ABS, air conditioning, crane, differential lock, electric window regulation, fog lights, power mirror, = Additional options and accessories = - 1 fuel tank - 4 axes - Airbag - Armrest - Beacon(s) - Central lubrication - Day Cabin - Disc brakes - Front suspension: Leaf - Hub Reduction - Hydraulics - Open roof - PTO - Radio - Radio/Cassette player - Rear suspension: Air - Sper - Thick Axles - Tipping hydraulics = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Remote control: ✓ Rotator: ✓ Clamshell bucket: ✓ = More information = Axle configuration Tyre profile: 70% Brakes: disc brakes Front axle 1: Max. axle load: 9000 kg; Steering; Suspension: leaf suspension Front axle 2: Double wheels; Differential lock; Max. axle load: 8300 kg; Steering; Reduction: hub reduction; Suspension: air suspension Rear axle 1: Double wheels; Differential lock; Max. axle load: 8300 kg; Reduction: hub reduction; Suspension: leaf suspension Blsdpfx Acszph Sqo Tol Rear axle 2: Double wheels; Lift axle; Max. axle load: 7400 kg; Steering; Suspension: leaf suspension Weights Empty weight: 16.810 kg Carrying capacity: 15.190 kg GVW: 32.000 kg Max. towing weight: 70.000 kg Functional Crane: HMF 1720-K3, year of manufacture 2012, behind the cab Make of bodywork: AJK Maintenance, history and condition APK (MOT): tested until 11/2026 Technical condition: very good Visual appearance: very good

Condition: new, Year of construction: 2005, Planing machine with infeed device EM 11 with 5th spindle at the bottom Includes 5 planing heads. Bledpfozvvuajx Ac Tel

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 Bedpfx Aszacwdjc Tjll - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: used, Year of construction: 2002, x-travel 650 mm Bledpfx Acozmy Tus Tjl y-travel 650 mm z-travel 650 mm Control Siemens 840 D weight of the machine ca. 12 t

Condition: repair required (used), Year of construction: 2001, X-axis: 400 mm Y-axis: 240 mm Z-axis: 350 mm Spindle speed: 42,000 rpm Tool holder: HSK-E40 UPC pallet system: 320 x 320 mm Bljdpfjznk Ryex Ac Tsl Control system: HEIDENHAIN TNC 430 M The machine is not ready for operation; the spindle needs to be replaced.

Condition: used, Year of construction: 1988, pressure 400 t distance between columns 1100 mm stroke 250 mm no. of strokes 25 - 75 /min Bjdpfszrpt Uox Ac Tjll distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1100 x 965 mm capacity of ejector in table 30 t ejector stroke of ejector in table 80 mm capacity of ejector in ram 3 t stroke of ejector in ram 60 / 70 mm ram surface 980 x 800 mm column travel -side 800 mm ram adjustment 20 mm power capacity 80,0 + 5,5 kW weight 47,0 t Dimensions (WxDxH) 3,5 x 3,3 x 6,0 m weight of switch cabinet 1,4 t dimensions of electrical cabinet (WxDxH) 4,9 x 0,5 x 2,6 m Multi-station cold extrusion press with link drive with infinitely variable drive, hydraulic clutch-brake combination (Ortlinghaus), hydraulic overload protection in the slide, motorised slide adjustment, pneumatic counterbalance cylinder in press frame, cam-controlled ejector in table (30 t / 80 mm), pneumatic ejector in slide (3 t, 60 mm), motorised central lubrication

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, controller model: FANUC Series 160is-MB, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel ranges X-axis: 600 mm Y-axis: 410 mm Z-axis: 460 mm A-axis: -120 to +30° C-axis: 360° Spindle Speed range: 100 to 12,000 rpm Speed stages: stepless Spindle mount: 7/24 taper, size 40 Spindle bearing inner diameter: 65 mm Distances Distance from table surface to spindle nose: 70 to 530 mm Distance from column front to spindle center: 620 mm Table Work surface diameter: 350 mm Maximum workpiece weight: 200 kg Height of table surface above floor: 1,080 mm Feed rate Rapid traverse X- and Y-axis: 48 m/min Rapid traverse Z-axis: 36 m/min Rapid traverse A-axis: 22.2 rpm Rapid traverse C-axis: 33.3 rpm Working feed rate X, Y, and Z-axis: 1 to 36,000 mm/min Working feed rate A-axis: 22.2 rpm Working feed rate C-axis: 33.3 rpm Tool changer Tool mount: JIS B 6339 BT40 Pull stud: MAS 403 P40T-1 Tool magazine: 20 tools Max. tool diameter: 110 mm Max. tool diameter with adjacent positions occupied: 82 mm Max. tool length from reference line: 300 mm Blodezpxgrjpfx Ac Tsl Max. tool weight: 7 kg Tool change time, chip-to-chip: 1.2 s Tool change time, cut-to-cut: 3.8 s MACHINE DETAILS Control model: FANUC Series 160iS-MB

Year of construction: 2013, condition: like new (used), We are offering 2 units of this new Selmi Tank 400 chocolate melting tank, manufactured in 2013. Manufacturer: Selmi Model: Tank 400 Year of manufacture: 2013 Condition: like new Machine type: Chocolate melting tank Bedpfx Aozvagysc Tell If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 2012, functionality: fully functional, total width: 1,370 mm, total length: 2,950 mm, total height: 1,800 mm, We offer this used Profi Packer SCV 400 film wrapping machine, manufactured in 2012. Manufacturer: Profi Packer Model: SCV 400 Year of manufacture: 2012 Condition: used Category ID: 1262 Type ID: 907 Machine type: Film wrapping machine Bodpfx Aszvdadsc Toll Machine dimensions (L x W x H): 2,950 x 1,370 x 1,800 mm Cycle rate per minute: approx. 65 cycles Film thickness: 7 to 80 μm Includes infeed conveyor and hot air tunnel for heat sealing. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 9,965 h, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH ROTO-PALLET X-AXIS TRAVEL: 560 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 570 mm DISTANCE SPINDLE NOSE-TABLE: 210 - 780 mm RAPID FEEDS X-Y-Z: 40 - 40 - 32 m/min SPINDLE: 80-10000 rpm; 15-18,5 kW; ISO 40 - BT PALLET: N.2 ; 712X475 mm MAX ADMITTED LOAD: 300X2 Kg HIGH PRESSURE COOLANT: 15 Bar Bljdpfx Aceq Nqkxe Tol TOOL MAGAZINE: CHAIN-TYPE ; 32 POS MAX TOOL DIAMETER: 90(150) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 8 Kg CONTROL UNIT: FANUC 21i - MB WEIGHT: 7600 Kg OVERALL DIMENSIONS: 3010 x 3450 x 3145 mm

Condition: good (used), Year of construction: 2013, functionality: fully functional, The FAMAR TANDEM 400 is a powerful CNC vertical lathe with two independent machining stations. The machine is equipped with driven tools, automatic workpiece loading and unloading, a measuring probe, high-pressure coolant, and coolant filtration. The tandem design enables efficient series production and the simultaneous use of two separate machining stations. Main technical parameters: Standard chuck diameter: 400 mm Maximum chuck diameter: 400 mm Nominal turning diameter: 300 mm Maximum turning diameter: 400 mm Maximum turning length: 480 mm Maximum turning length: 300 mm Number of main spindles: 2 Max. main spindle speed: 4,000 rpm Rated power of main electric spindle: 49.6 kW Rated torque: 458 Nm S6 40% power: 61.7 kW S6 40% torque: 724 Nm Machine dimensions: approx. 3,900 × 3,500 × 3,200 mm Machine weight: approx. 21,000 kg Electrical connection: 400 V / 50 Hz Installed power: 90 kW CE compliant Tooling equipment UTTUM50 – turret for driven tools, size 50 Max. driven tool speed: 8,000 rpm Torque: 100 Nm Power: 15.6 kW UTDUM50 – turret tool disk Size VDI 50 12 tool positions Direct tool drive PPP40 – preparation for 2 hydraulic circuits For special workpiece clamping Piping and valves Control via M-functions Automation TRPAPE20 – 1 automatic circulating pallet conveyor for loading and unloading workpieces A single conveyor system for both workpiece infeed and outfeed Circulating pallet magazine Belt design Pallet occupancy monitoring system Pallet sorting system Working height approx. 950 mm Automatic workpiece loading and unloading via the machine TRPNVBPTE4 – Shuttle system with rotary station Loading/unloading shuttle system Integrated rotary station Including 1 set of jaws for the workpiece AZGRRB500 – set of jaws for Shuttle rotary station MPDM2 – automatic measuring probe Automatic workpiece measurement Coolant, filtration, and chip removal LBCVTT50 – belt conveyor for chips Separate conveyor for chip removal Particularly suitable for short chips, such as cast iron, brass, and some aluminum alloys LBVA760 – coolant tank Volume 760 l LBAP10 – high-pressure pump Pressure 20 bar Internal tool cooling LBFTC – paper filter for coolant Suitable for cast iron and aluminum Filtration of particles approx. 0.08 mm Flow rate max. 60 l/min LBFTTDF – double switchable filter Filtration of particles approx. 0.1 mm Bypass system allowing filter cartridge replacement AZPL – air workpiece position control Additional equipment: Bledpfozyp Afsx Ac Tsl CNC control Siemens 840D sl 2 main spindles Driven tools C-axis 12-position turret VDI 50 1 automatic workpiece pallet conveyor Shuttle system with rotary station Automatic measuring probe Separate belt conveyor for chips High-pressure cooling 20 bar Coolant filtration Hydraulic clamping circuits Central lubrication Complete safety guarding CE The machine is particularly suitable for automated series production of rotational parts, where the two independent machining stations, driven tools, and automatic workpiece handling can be utilized.

Year of construction: 2002, condition: ready for operation (used), A relatively lightly used Traub CNC universal lathe is available. Spindle bore: 82mm, max. chuck diameter: 315mm, turning length: 750mm, X/Z travel: 360mm/750mm, Z-axis travel: +/-60mm, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 3250mm/1900mm/2300mm, weight: approx. 7800kg, operating hours: approx. 21812h. Documentation available. An on-site inspection is possible. The image is for reference only. Bledpfx Aezhnrnoc Tol