Used Gough&Co. - for sale (27,208)

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. Laodpfxoynz Idj An Ueb - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. - Very high warranty period.

Condition: new, Year of construction: 2026, 200L mobile pressure-blasting vessel for construction sites or stationary use. Fittings are securely mounted under the handle. Very well suited for robust site applications. Comprising: - 200L pressure vessel - Pre-sieve - Weather protection lid - Water separator - Pressure regulator - Adjustable conveying air control (air quantity for vessel and blast hose) - Blast hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57m³/min) Ledoynr E Tepfx An Uoab - Abrasive metering valve, Y-piece rubber coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with bucket (Hobbock) and lid as an attachment for extended blasting without refilling - etc. Manufactured in Germany

Condition: new, Year of construction: 2026, Pressure blasting pot, 140L, mobile for construction site or stationary use. Fittings securely mounted under the handle. Very well suited for tough construction site applications. Includes: - 140L pressure vessel - Pre-filter - Weather protection cover - Water separator - Pressure regulator Laodjynr E Hspfx An Uob - Adjustment for conveying air (tank air volume and blast hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety features: - Dead man’s switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with drum and lid as attachment for multi-hour blasting without refilling - etc. Made in Germany

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel Laodpfx Ansynr Emj Uob - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Condition: used, Year of construction: 2001, - Year of manufacture: 2001 Specifications - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Strokes per minute: 10 - Oil tank: 410 l - Motor power: 37 kW - Operating voltage: 400 V - Rated current: 72 A - Main fuse rated current: 100 A - Dimensions (W x H x D): 3750 x 2400 x 3425 mm - Weight: 13800 kg Ljdpfx Anexa Aclj Ueab

Condition: used, Technical details: plate thickness: 1 mm distance between columns: 2,255 mm bending angle max.: 130 ° total power requirement: 2,25 kW Weight approx.: 1400 kg dimension machine xH: 2,7 x 1,15 x 1,3 m Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is missing manual operation O.K. No backgauge Ledpfxswq I U Ro An Ujab *

Condition: used, Year of construction: 2002, machine/vehicle number: BM5008, BM%==( Manual operation Hot-melt gluer for book spines Ljdpoh S Drgsfx An Uoab spine milling station for books H440xW280xT40mm

Year of construction: 2020, condition: new, Title Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate and Frame Filter Press – Year 2020 – NEW / Unused Short Description For sale: unused, factory-sealed plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in brand-new condition, have never been commissioned, and remain in their original packaging from the factory. Manufacturer Strassburger Filter GmbH + Co. KG (Germany) Model / Type SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of Manufacture 2020 Serial Number Among others: 032003303920 (additional serial numbers available) Lsdpfxox Ihufo An Ujab CE Marking Yes Condition Brand new / unused Factory-sealed Never installed, never used for production Stored in warehouse Quantity Available 4 identical units available New Price Original price €94,000 per unit (Total value for 4 machines: €376,000) Design / Material All stainless steel Plate and frame filter press Gasketed plates Pharma / biotech specification Hydraulic closure incl. hydraulic unit CE-compliant Technical Data Plate format: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Weight (filter frame): approx. 480 kg Weight (plate pack): approx. 120 kg Plate Pack 14 filter plates 13 filter frames 1 end frame 1 partition plate 28 filter layers per setup Hydraulics & Drive Hydraulic closure Hydraulic power unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Solenoid voltage: 24 V DC Compressed air requirement: 3.0 bar Connections Product inlets and outlets: DN25 Vent / drain: DN15 Connections according to DIN 11864-2 Drip tray included Areas of Application Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location Germany Inspection by appointment Immediately available

Condition: excellent (used), Dough divider. Manufacturer - Friul Co srl. Type - M44/700. Portion weight - 300-650gram. Capacity - 70-400kg/h. Container capacity - 44liter. 230V, 50hz, 1300W, 6.5AMP. Dough rounder. Manufacturer - Friul. Type - R10. 230V, 50hz, 370W, 2.4AMP. Laedpfxsv Szubs An Usb Elevator included. CLH.24

Condition: ready for operation (used), Used heatable/coolable pressure vessel with Atex agitator and insulation Last intended use: Pharmaceuticals, cosmetics Article number: 10815 Volume: 5600 liters Type: standing on 4 feet Material (in contact with media): 1.4571 / AISI316 Design: with double jacket and insulation Operating pressure according to nameplate: +1/+3 bar Max. operating temperature: 0/ +150 °C Container dimensions: Laedotdgkxspfx An Usb Manhole: 500mm Outer diameter: 2000mm Total height: 2870mm Total width: 2250 x 2060mm Cylindrical height: 2000mm Materials: Inside: 1.4571 / AISI316 Outside parts: 1.4301 / AISI304 Facilities: Nameplate: Yes ATEX agitator Power: 22KW Speed: 1465/min Agitator: Propeller 2x spray head Connector

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED METAL INSERT PLACEMENT UNIT This system is part of a larger production line; please refer to our other listings for more information. The offered system includes 3 provision stations for facing sheets, an automated adhesive application machine for sandwich panel bonding, a lay-up conveyor for manual assembly of the inlay/ribbing, gantry systems for manipulating the facing sheets, and an automated placement unit for metal inserts/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): GRP, sheet metal, plywood, wood/PU strips, PVC, Styrofoam GLUING GANTRY FOR CONTOUR & SURFACE BONDING (of the facing sheets & inlays): Number of needle valves surface: 104 Number of needle valves contour: 1 Adhesive system: 1K-PUR Number of nozzles in water spray unit: 8 AUXILIARY UNITS: Ljdeyt Nm Sopfx An Ujab Climate chamber (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Condition: used, Year of construction: 1998, operating hours: 6,720 h, functionality: fully functional, machine/vehicle number: 22.303, planing height: 300 mm, planing width: 400 mm, rotational speed (max.): 5,800 rpm, height adjustment type: electric, compressed air connection: 7 bar, input voltage: 400 V, number of spindles: 12, power: 111.2 kW (151.19 HP), chip removal: 20 mm, input frequency: 50 Hz, input current: 327 A, For sale is a heavy-duty, industrial-grade four-sided planer Rex 410 complete with extensive HIT mechanization, designed for the efficient processing of structural timber, KVH/BSH products, and profile boards. The system is suitable for: • Pre-planing • Lamella planing • Final planing of KVH/BSH • Profile production • Continuous beam processing including turning and patching Laedeyk E R Iepfx An Ueb The machine features 12 spindle units including chamfering devices and is engineered for high material removal rates as well as large cross-sections. Sold ex-location (machine is not dismantled). If you have any questions or require further information, please feel free to send us a message or give us a call.

Year of construction: 2022, condition: ready for operation (used), A fully automatic horizontal tunnel stretch wrapper Bang & Co for securing products on corrugated cardboard blanks is available. Turntable speed: 100rpm, max. conveyor speed: 18m/min, carton width range: 70mm-650mm, min. product length: 200mm, max. spool diameter: 140mm, max. spool height: 125mm, film roll inner diameter: 38mm, film thickness range: 18µm-40µm. Machine dimensions X/Y/Z: approx. 1600mm/1250mm/1650mm, weight: approx. 500kg, operating hours: approx. 6851h. Dokumentation vorhanden. An on-site inspection is possible. Lsdpfsxwyvqox An Usab

Condition: ready for operation (used), A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder, folding table and deposit table with counter and feed. On-site inspection is possible. Laedpjvtqrfjfx An Ujb

Condition: ready for operation (used), Center width: approx. 1400mm, center height: approx. 550mm, spindle diameter: approx. 100mm, faceplate: 1000mm/820mm. Speed: 560rpm, lathe chuck: 400mm/320mm. Laedpfsr N Rhqjx An Ujb

Condition: ready for operation (used), Year of construction: 2003, A tubular machine (flat bag machine with winder) Honsel & Co., which was overhauled by PCM in 2003, is available. Roll width: 980mm, bag length range with wrap closure: 280mm-710mm, bag length range as tube without wrap: 710mm-1020mm. Includes a flexographic printing unit and extensive accessories for format changeover. Documentation available. On-site inspection is possible. Lasdpfx Ajvtqq Uen Uob

Condition: ready for operation (used), A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder. The machine is partially dismantled. Toothed belts must be tensioned and partially replaced. Toothed belt wheels are disassembled and must be installed. On-site inspection is possible. Lodpfxevtqrlo An Usab

Year of construction: 1989, condition: not inspected (used), machine/vehicle number: 117-0690-7892 Messemodell, Brief Description: - 2x12 spinning positions - SE9 boxes - Corolab - 1 start-up trolley Laodpfjw Rldzsx An Ujb - SRZ (precision winding) - Machine documentation available Last Use (Jan. 2024): - Application-specific product testing of polyester fibers - 0.9 - 1.7 dtex, 32-38 mm cut length - Approx. 45kg/sample to assess running behavior under constant machine settings - Mainly in Nm34, Nm50 - Untested, only for spare parts use! The machine has been dismantled and stored, but can be inspected on site. Pick-up only by buyer in 14727 Premnitz, no shipping. If interested, we look forward to your offer. Written inquiries only, please.

Condition: new, Year of construction: 2023, travel distance X-axis: 1,020 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 540 mm, workpiece weight (max.): 6 kg, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, rapid traverse Z-axis: 32 m/min, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, spindle speed (max.): 12,000 rpm, table load: 500 kg, YCM vertical machining center model NXV-1020A Fanuc control MXP-300FB+ Screen size 15" 12,000 revolutions Ljdpfxjrfdckj An Uoab 30 tools 20 bar internal cooling Hinged belt chip conveyor Spindle oil cooler Oil separator Steep taper 40 - DIN-69871A or BBT-40 Machine-side cable preparation for 4th axis connection Demonstration machine at a special price Sale only possible in Germany and Austria

Condition: excellent (used), Year of construction: 2017, operating hours: 150,050 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: iTNC530, rotary table diameter: 500 mm, overall weight: 13,000 kg, spindle speed (max.): 14,000 rpm, operating hours of spindle: 6,950 h, coolant supply: 20 bar, spindle nose: HSK 63, number of slots in tool magazine: 60, Equipment: chip conveyor, oil mist separator, rotational speed infinitely variable, • Condition: Excellent condition • Operating hours: 6,950 • KESSLER rotary table, Ø 500 mm • Tool magazine: 60 stations, HSK-A63 • Internal coolant supply: 20 bar, with band filter system • Coolant system: Automatic coolant level monitoring • Air through spindle • Tool measurement: BLUM laser tool measuring system • Workpiece measurement: Infrared workpiece probing (3D touch probe system), incl. workpiece measurement preparation • Collision monitoring: POS DCM module • Media feed: 3-channel media feed in the center of the table • Viewing: Rotary inspection window • Handwheel Please send us an inquiry directly via our website if you are interested in the machine. Lajdpox Hg Ibefx An Ueb Due to technical reasons, direct inquiries for a quotation via third-party platforms are difficult and may be delayed.

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Lodpfx Ajyz Af Een Ujab Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) Lsdpec Ipc Ujfx An Uoab → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED lighting → Power cable → Accessory case → Operating instructions OPTIONALS: → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm Ljdpfx Aepbbc Hsn Ueab - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: 520511, Features: → robust machine housing made of cast iron → automatic loading and unloading of the test force → automatic change between lens and indenter body → LED illumination → digital measuring eyepiece → LCD color display touch screen → conversion to other hardness scales (e.g. HRC/HB) → easy operation Technical data: → test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000). → Vickers testing method → cross table 110 x 110 mm / travel 25 x 25mm → eyepiece 10X → automatic obejctive turret → objectives 10X / 40X / 60X → max. specimen height 90mm → max. specimen depth 110mm → conformity: DIN EN ISO 6507 / ASTM E-384 → weight approx. 50kg → power supply 230V / 50Hz Scope of delivery: → hardness tester → diamond indenter 136° → Cross table 110 x 110mm → Eyepiece 10X → revolving nosepiece → Objectives 10X / 40X / 60X → LED illumination → Power cord → Accessories case → Instruction manual OPTIONAL → VMS3 software (video measurement system) → Digital micrometer (for transferring the edge distance into the VMS software) → Module "automatic measuring" (only in connection with VMS3 software) Lajdpfxjc Ipckj An Ujb → PC system / monitor

Year of construction: 1992, condition: used, Plate heat exchanger for milk processing Lasdpfx Anoh Eulgs Usb