Used Goldhofer Thp Sl for sale (2,559)

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 6,242 h, load capacity: 6,000 kg, lifting height: 6,300 mm, fuel type: diesel, mast type: triplex, construction height: 3,080 mm, fork length: 1,400 mm, drive type: Diesel, Four-way sideloader Mast type: Triplex Technical condition: good Fork positioner, Dkedpsu Acxgsfx Aa Iju

Condition: used, empty load weight: 6,285 kg, maximum load weight: 32,715 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2013, loading space length: 7,300 mm, loading space width: 2,300 mm, loading space height: 1,470 mm, loading space volume: 24 m³, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 3-axle, SAF axles, air-suspended, 1st axle liftable, lifting+lowering, ABS (anti-lock braking system), roller tarpaulin, catwalk, flap, chute, supports Body: steel body with roller tarpaulin approx. 24m³ 3x 9t SAF axle, disc brakes! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dkjdpfx Aajvhiqvj Iou - .

Condition: used, empty load weight: 5,900 kg, maximum load weight: 29,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2010, loading space length: 7,400 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 24 m³, suspension: air, tire size: 385/65R22.5, color: grey, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 3-axle, BPW axles, air suspension, 1st axle liftable, lifting+lowering, ABS (anti-lock braking system), roller tarpaulin, catwalk, flap, folding U-protection, supports Dkodpfx Aajvhi Dij Ieu Body: Steel body approx. 24m³ with platform and roller tarpaulin 3x 9t BPW axle, 1st axle liftable, disc brakes. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 23A0017, turning diameter over cross slide: 520 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 500 mm, travel distance Z-axis: 500 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 18 m/min, total height: 1,890 mm, total width: 1,620 mm, feed length Y-axis: 2,500 mm, type of input current: three-phase, Equipment: documentation/manual, CNC Lathe, with 45° inclined bed - COGENTECH > Siemens 808D control > Siemens motors > Linear guides Dodpfxjvwbvpo Aa Ijku > 6'' hydraulic universal with 3 jaws > 6-station electric turret

Year of construction: 2024, condition: new, functionality: fully functional, We offer this new Sinterit LISA PRO SLS 3d printer, year of construction 2024. Printer is new and has not been used other than tested by the manufacturer. The printer is packed into robust travel enclosure and is ready to be shipped. Approximately 7 kg of fresh PA12 print powder is included. Machine name: Sinterit LISA PRO Serial number: 021624120019 Manufacture date: 03/2024 Manufacturing country: Poland Machine type: SLS 3D printer (Selective Laser Sintering) Dimensions (W x D x H): 690 x 500 x 880 mm Total weight: 90 kg Power supply voltage: 220-240 V Power supply frequency: 50/60 Hz Power supply current: 7 A Power consumption: 1.9 kW IEC protection class: Class I IP code: IP30 Dedoztkxhspfx Aa Ijku Maximum internal temperature: 210 °C Maximum external temperature: 60 °C FCC ID: TE7WN725N Laser product class (external): Class 1 IR laser product, invisible laser radiation Laser product class (internal): Class 4 IR laser product, invisible laser radiation If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2000, KOSME Extra Fix 16T rotary labelling machine for labelling bottles or other oval containers. Manufacturer: KOSME Model: Extra FIX 16T 1056 |S3 E2 + SL Dsdjywchlopfx Aa Isku Year of manufacture: 2000 Capacity: up to 9,000 bottles/h Carousel: 16 stations Equipped with three cold glue labelling heads (front, back, and neck) Original electrical documentation. Technical condition: used machine, condition as shown in the photos.

Condition: new, Year of construction: 2026, SL class = machining area X 1250 mm x Y 2500 mm x Z 100 mm High-precision linear motor axis system with 6 KW laser power (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Laser processing easy and high-precision - Laser cutting with high speed and quality Dkjdpfxok Ranze Aa Iou

Condition: excellent (used), Year of construction: 2013, XYZ 1630 SLX CNC Lathe New 2013. Swing 400mm x 760mm B.C. Spindle speeds & bore 150- 2500rpm & 54mm. C/w 3jaw chuck, quick change tool-post. Dkodez E R N Uepfx Aa Iou

Year of construction: 2022, operating hours: 998 h, condition: used, functionality: fully functional, machine/vehicle number: 031022210023, We offer setup for SLS 3D printing consisting of Sinterit LISA X SLS 3D printing machine, Sinterit Powder Handling Station, Sinterit Sandblaster SLS and cadMIX powder mixer. Details reg. Sinterit LISA X 3D printer : Laser type: IR Fiber Coupled Diode Laser, 30[W]; λ = 976 ± 3 [nm] rated to > 30,000 hrs Max. size of print diagonally: 398 [mm] (15.7 [in]) Max print volume: TPU based / Flexible material: 130x180x340 [mm] (5.1×7.1×13.3 [in]) PA / PP: 130x180x330 [mm] (5.1×6.7×13.3 [in]) Layer height (min – max): 0.075 – 0.175 [mm] (0.003 – 0.006 [in]) Build Speed: up to 18.4 [mm/h] (0.72 [in/h]) Serial number: 031022210023 Manufacturing date: 05/2022 Country of origin: EU, Poland IEC protection class: Class 1 IP code: IP30 Machine type: Selective Laser Sintering 3D Printer Dimensions (W × D × H): 650 × 610 × 1200 mm (25.6 × 24.0 × 47.2 in) Total weight: 145 kg (319.0 lbs) Supply voltage range: 190–240 V AC Supply frequency range: 50–60 Hz Maximum power consumption: 1650 W AC current: 8 A AC voltage for current rating: 230 V AC Number of phases: 1 Short-circuit current rating: 6 kA Total printing time : 998 hrs For more details and technical specifications please see attached .pdf documents. We are selling complete setup together not separately. Complete setup bought in Slovakia. Examples from printer are available. Box for transport is available. Printer has open system, it is possible to modify the parameters. Dedpfxsy Snn Hs Aa Ieku If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, In the Powder applicator it consists of a hopper and a vibrator feeder, that spreads out the granulate in an 130 cm and even coating over the printed transfer paper on the under laying conveyer 140 cm wide net belt, 150 cm long. The machine is height adjustable 88-100 cm and has the total length 150 cm. The powder feeder as well as the conveyor are both individually adjustable for optimal processing. Excess powder is effectively removed by a combination of airstreams, scatter mechanism and brushing. The silent automatic self-cleaning filter system recycle the granulate back to the hopper for re-processing and exhausts filtered air. Dkedpfx Aox R N Uroa Iou In order to minimise the influence of static electricity there is two antistatic bars across the conveyor.

Condition: good (used), mileage: 228,791 km, power: 90 kW (122.37 HP), first registration: 01/2022, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 4,500 mm, total width: 1,850 mm, total height: 1,850 mm, loading space length: 910 mm, loading space width: 1,470 mm, loading space height: 1,270 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Tinted windows - None - LED lamp - Alloy wheels - Manual - Radio/cassette - Lane keeping assist - Fabric - Partition = Notes = Configuration: 4x2, Unladen weight: 1543 kg, Gross vehicle weight: 2250 kg, Alloy wheels, Type of cab: Double cab, Cruise control, Air conditioning, Number of airbags: 4, Rear window wiper, Parking assistance: Front and rear, Tinted windows, Electric windows, Electric mirrors, Partition, Radio/cassette, GPS navigation, Color: Silver, Metallic, Heated mirrors, Lighting type: LED lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Engine power: 90 kW (121 hp), Engine displacement: 1968 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Automatic, Power steering, ABS, ASR, Starter battery, Body type: Standard, Roof rack: None, Side doors: 2, Side windows: 4, Rear closure: Double door, Central locking, Seats: 5, Seat arrangement: 2+3, Seat upholstery: Fabric, Seat adjustment: Manual, L1 Combi 5-seater, Automatic, LED, Navigation, 2 sliding doors, Cruise control, Alloy wheels, 122 hp, Euro 6, Tire type: Summer tires = Additional Information = General information Number of doors: 2 Dedezw T Rnspfx Aa Ieku License plate: KLEYN1 Axle configuration Tire size: 205/60R16 Brakes: Disc brakes Suspension: Coil suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Weights Unladen weight: 1,543 kg Payload: 707 kg GVW: 2,250 kg Functional Load area height: 60 cm Maintenance APK (Technical Inspection): valid until 01.2027 Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial information Leasing price: €276 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: like new (used), Year of construction: 2025, High Lift Electric Pallet Truck ( As NEW) Year 2025 Pharma specifications 800mm Lift Fully stainless steel Fork length 1150mm Lift capacity 1000kg Compact battery pack, folds up inside the truck, no possibility of damage Complete with charger CE certified Dodpez I S Eiofx Aa Ijku Quantity six in stock

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,750 mm, spindle bore: 104 mm, spindle speed (max.): 1,800 rpm, type of input current: three-phase, Model:Prototurn 555 Dkjdpszrnkrjfx Aa Ieu Swing Over Bed:560mm Distance Between Centres:1750mm Control: Prototrak SLX Spindle Speeds: To 1800 RPM Spindle Bore:104mm With: 300mm 3 Jaw Chuck Fixed Roller Steady Quick Change Toolpost Toolpost Holders Dimensions: 3940 x 2250 x 1910mm high Weight: 4100 Kgs

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Dodjfy T Spepfx Aa Ieku Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Dksdpfx Aefzkqmea Isu Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 2020, condition: new, 7 "Touch Panel The large color touch panel looks aesthetically and is comfortable and intuitive to use. You will set all important parameters on it. Memory of 20 programs with 10 events It is possible to save up to 20 programs and activate up to 10 consecutive time-temperature events arranged in the heating curve. This is especially needed for more demanding processes. Information on gas / oil consumption The consumption is calculated based on the burner settings. This feature will allow you to estimate the cost of a given cycle, plan consumption and check personnel. Dual-channel recorder of USB cycle parameters Each furnace is equipped with a recorder that records all firing parameters, including two temperature channels - like in an airplane black box, on a USB flash drive. The system also enables the analysis of monthly / daily statements, including media consumption and performance. Each start of heating, opening the door, can be recreated, a few years back. Such a dedicated option is not offered by any manufacturer. It is a system developed from scratch by our programmers Automatic smoke exhaust chimney The chimney can be programmed to open a few minutes before the end of the firing in order to smoke the chamber. It can be remotely controlled from the panel, it does not need to be done mechanically as in most structures. Minute forecast until the end The cycle has started, how long will it end? calculating the heating dynamics, we will count it and show on the display how much longer it will take. To open it, just pull the door. The lock has adjustable pressure of the door, to close it just push it, the lock will catch the door and automatically pull it back. In order to minimize the effect of heating the hall when opening the door, a hood is installed above the door to remove some of the heat to other places. The MTS system was created to provide a real reading of the temperature of the furnace chamber. Standard measurement is based on one temperature measurement which is often wrong.MTS is a system of many sensors located in the outermost places of the chamber. The multi-zone heating system ensures a firing quality that has been so far unique. Each normal oven has only one heating zone and only one temperature measurement! Dodpfxsfz U Tqj Aa Ieku The multi zone heat system supports up to 8 independent heating zones in one oven. Each heating zone has as many as 3 temperature sensors! When there are temperature differences between zones, they are automatically equalized! The system helps to combat the problem when elements of different material thicknesses enter the furnace.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, Equipment: CE marking, TECHNICAL SPECIFICATIONS DOUBLE MANDREL DECOILER MILLUTENSIL TYPE SL MD 600: Dksdpfxsyt Eldo Aa Ieu Model: SL MD 600 Type: 600x400 Serial number: SM2-0043 Year of manufacture: 2010 Max. load per mandrel: 600 kg Max. strip width: 400 mm Max. strip width with arms: 300 mm Min. opening: 360 mm Max. opening: 620 mm Revolutions per minute: 16 Installed power per mandrel: 1.1 kW Voltage/frequency: 400 V / 50 Hz Auxiliary voltage: 24 V Weight: 1,000 kg Machine is in excellent condition. Complete with user manual and CE conformity declaration.

Condition: new, Year of construction: 2026, NEW Snap lock roofing panel roll forming machine SL-1 Snap lock roofing panel roll forming machine SL-1 is designed and manufactured by our company as one of the flagman equipment for metal roofing panels production. Following machine makes standing seam roofing panels with self-closing lock on sides (snap lock). The main advantage of such lock system is the easy way of installation: to connect two panels with each other you just need to cover bottom part with top part and press it with some force, you will hear specific click noise at this very moment. That is why name of system is self-closing lock one. Comparing to standard standing seam roofing panels with mechanical lock which you need to close with special tools or equipment, snap lock panels are much easier to install and don’t require additional expensive devices for work. To fix panels at the roof frame you can use standard self-tapping screws, to make it possible, while rolling machine makes special fixation holes on one side of roofing panels. Such simple product design also helps to save costs and make installation process easier, not spending money on clips purchasing, comparing to the standard standing seam metal roofing with mechanical lock installation. So standing seam roofing with snap lock is easier to install, does not require high skilled employees and cut expenses for additional machines purchases. Dkjdpeiuz T Iofx Aa Ieu Total high of panels - 31mm As per order, we can also make machine for 26mm panels high. Machine has 10 pairs of forming rolls. One of the rolls has special punching parts so can cut fixation holes at roofing panel for further installation operations. Cutting tools are made from tools steel with heating and polishing, so have longtime working period. Maximum metal width can be 700mm, minimum 250mm. Snap lock roofing panel roll forming machine SL-1 is width easy adjustable one, so to adjust machine from one panel width to another you just need to rotate special handle. Rolling length – unlimited Rolling speed (m/min.): about 7 As extra options, you can get: - cross cutting knife; - length measuring device; - ribbed panel rolls; As per customer preferences snap lock roll forming machine can be equipped with automatization system and electric shears for panels cutting. Standard supply set of self-closing lock roll former machine SL-1 includes safety covers to protect working parts of machine from foreign objects. Snap lock machine can work with various types of metal: galvanized steel, copper, aluminum, color coated metal, etc.

Condition: new, Year of construction: 2026, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. Dksdon Hqmmspfx Aa Iju As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: used, Year of construction: 2021, New: No Colour: Black Empty weight: 736 kg Dimensions (LxBxH): 120 x 80 x 104 cm - Year: 2021 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 302486154 - Drive: Electric Dsdpfsz Ha U Aox Aa Ieku - Battery information: - └ Brand/Type: 03EPZS 0465SLC - └ Battery year of construction: 2021 - └ Capacity: 465Ah - └ Battery voltage: 48V - └ Battery test result: 100% - └ Tray length [mm]: 1040 - └ Tray width [mm]: 335 - └ Tray height [mm]: 905 - Type: Battery - Transport dimensions: 1200mm x 800mm x 1045mm (l x w x h) - Transport weight [kg]: 736kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 06/2020, loading space length: 7,400 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, total width: 2,550 mm, tire size: 435/50R22,5, wheelbase: 4,920 mm, Year of construction: 2020, Equipment: tail-lift, Axle configuration Tire size: 435/50R22.5 Axle brand: GOODYEAR Front axle: Max. axle load: 10,000 kg; Tire tread left: 40%; Tire tread right: 40% Rear axle: Max. axle load: 10,000 kg; Tire tread left: 40%; Tire tread right: 40% Dkjdoz Ildxopfx Aa Isu Weights Unladen weight: 6,260 kg Payload: 13,740 kg Gross vehicle weight (GVW): 20,000 kg Functionality Tail lift: DHOLLANDIA, rear tailgate, 2,000 kg Loading platform height: 110 cm Condition Technical condition: very good Visual condition: very good Further Information Please contact Martin Vos Vos, Martin Martin Vos, or Martin Vos for further information. = Company information = hello

Condition: used, This listing is for the RAININ Pipet-Lite XLS L-300 12 Chanel Pipetter (Button Colour-code White Dksdpfx Aasxv Dtqj Iju The unit is in full working condition and is ready for immediate use Key Features LiteTouch™ System (LTS) incurs significantly lower tip‑ejection and plunger forces—reducing repetitive strain risk Ergonomic build: smooth plunger springs, “stiction‑less” seals, and a sure‑fit handle for all‑day comfort RFID tagging: each unit stores service/calibration data, aiding lab inventory and GLP compliance Fully autoclavable shaft and tip ejector—easy to clean and maintain Performance Specs (20–300 µL range) Increment: 0.2 µL manual adjustment. Accuracy: ±0.8% (~1.6 µL at full volume). Precision: ≤0.3% (~0.6 µL)

Condition: used, maximum load weight: 30,726 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2017, next inspection (TÜV): 04/2027, loading space length: 13,430 mm, loading space width: 2,650 mm, loading space height: 2,460 mm, KRONE SD Refrigerated Trailer THERMOKING SLXi Spectrum * Registered: 04.2017 * 3-axle * 1st axle liftable Dodpsz I E Svsfx Aa Isku * Tire condition approx. 30-50% * Wall thickness 6 cm * Folding partition * 2 evaporators * Total operating hours: 11,504 h * Diesel: 9,644 h * Electric: 1,845 h * German vehicle

Condition: good (used), Year of construction: 1999, Maximum distance between centers 250 mm Distance between centers 1500 mm Spindle bore 63 mm Spindle mount, DIN 55027 Size 6 Spindle speeds (2-speed, stepless) 1 - 650 / 1 - 2,500 rpm Feeds (X/Z) 5000 mm/min Rapid traverse (X/Z) 7 / 6 m/min Taper in quill MK 5 Quill stroke 160 mm Quill diameter 70 mm Drive power 16 kW Machine dimensions L x W x H 3200 (length without chip conveyor) x 1800 x 1400 mm Machine weight 3200 kg Accessories / Special features: • Cycle control: HEIDENHAIN Manual Plus o Color screen Dkedpfoz Icrgsx Aa Iou o The machine can be operated manually using electronic handwheels and a position display, or with o CNC 2-axis cycle control MANUAL PLUS o 2D simulation, fast and reliable control o RS 232 interface o Graphically supported, dialogue-based programming o A color screen displays the current axis positions with residual value display, as well as the input of cutting data, cutting speeds (also constant), target points (absolute & relative) with graphical cycle check and simulations. Pre-programmed work cycles for complex shapes with curves or chamfers, thread or grinding cycles according to DIN; threads (metric, multi-start, tapered threads), boring and grooving. • 3-jaw chuck, diameter 250 mm • Chip conveyor • Hardened and precision-ground bed guides, main spindle, gears and shafts • Chuck guard, electrically protected • Quick-change tool holder system „MULTIFIX“ Size C • Protective guard with safety device, laterally sliding • Manual tailstock • Coolant system • Central lubrication • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2005, functionality: unexamined, turning length: 750 mm, turning diameter: 400 mm, spindle speed (max.): 4,200 rpm, spindle motor power: 22,000 W, swing diameter over bed slide: 630 mm, center width: 550 mm, The Saeilo Contur TSL 500 is a used slant-bed lathe, manufactured in 2005 by Trens in Slovakia (Type SBL 500 CNC). It features a 12-position turret with 6 powered stations and a Siemens Sinumerik 810D control system. An identical TSL 500 from 2006 is available at the same location in the Düsseldorf area. Anyone looking for two identical machines for a manufacturing cell can acquire both together. TECHNICAL DATA - Year of manufacture: 2005 - Control system: Siemens Sinumerik 810D - Swing diameter: 630 mm - Turning diameter: 400 mm - Maximum turning length: 750 mm - Distance between centers: 550 mm - Turret: 12-position, with 6 powered stations - Main drive: 22 kW, max. 4,200 rpm Dkodpoz H Ufvofx Aa Isu EQUIPMENT AND ACCESSORIES - Tsubaki chip conveyor with cable carrier (SRF 040) - Tool holders, stocked - Turning and clamping tools CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION Suitable for shafts, flanges, and housing components up to 400 mm in diameter, including drilling and milling operations. LOCATION AND PROCEDURE The machine is located in the Düsseldorf area. Inspection is possible by appointment. The buyer is responsible for dismantling, loading, and transport; upon request, we can provide contact details for local transport companies. Price on request. Please feel free to contact us via the contact form.