Used Fortuna 60 64 110 Ø 60 Mm for sale (106,874)

Condition: good (used), Year of construction: 1998, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: Radial fan type Nledpfx Astz Hubskieh -Motor: Loher 3.5 kW 955 rpm Ex protected -Volume flow: m³/h -Connection: inlet Ø 500 mm -Connection: Output 400 x 500 mm -Dimensions: 1160/880/H950 mm -Weight: 153 kg

Condition: good (used), Steel pipe, round pipe, structural pipe, pipe, flushing pipe Nledpfx Akozfafhjish -Diameter: 560 mm -Wall thickness: 16 mm -Length: 2880 mm -Number: 3x steel pipes available -Price: per piece -Weight: 214 kg/m²

Condition: new, machine/vehicle number: FGWPEP40EJSD07533, fuel type: diesel, motor manufacturer: Perkins 1104C-44TAG2, General information Year of manufacture: 2026 Field of application: Construction Weights Empty weight: 1.254 kg Functional Generator capacity: 110 kVA Dimensions of cargo space: 209 x 112 x 153 cm CE mark: yes Nedpfey Nhu Iox Akislh Other information Fuel consumption: 16.5 L/Hour at 75% Load Prime Generator: FG Wilson FGL30040 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel Water tank volume: 218 l Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trucks, tank rollers, machine transport rollers steering mechanism -Machine transport rollers: 4 tank rollers Nodpowx Hciefx Akiolh -Load capacity: 30 t (7.5t per piece) -Support height: 110 mm -Plates: 3x Ø 140 mm / 1x width 135 mm -Submission/Price: complete -Dimensions of transport case: 1005/200/H165 mm -Total weight: 57 kg.

Condition: used, Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 60 mm -Transport roller width: 830 mm -Total length: 850 mm -Admission: M8 Nsdpfx Aodv D Erokielh -Number: 10 rolls available -Price: per piece -Weight: 2.7 kg/piece

Condition: used, Cast iron bed 2600 x 2000 x 350 mm Length: 2600 mm Nlsdsz I A Nrjpfx Akieh Width: 2000 mm Thickness: 350 mm 8 T-slots T-slots dimensions: 55 x 35 mm Slots spacing: 250 mm Equipped with 12 leveling feet Weight: approx 4,5 T

Condition: used, Face plate, face plate chuck, four-jaw chuck, facing chuck -Chuck size: Ø 600 mm Nledpfofwncgsx Akish -Through hole: Ø 136 mm -Hole circle: Ø 170 mm -Weight: 111 kg

Condition: used, Base for folding tool, bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine -Tool for: press brake Nlodpfxefiqrmj Akioh -Support for: press brake tool -see drawing: at the photos -Number: 2x documents available -Price: per piece -Dimensions: 3600/110/H32 mm -Weight: 76 kg

Condition: good (used), grinding drum, deflection drum, belt sander, belt grinder, drum sander, drum sander, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Manufacturer: KED Kurt Ehemann, grinding drum drum width 640 mm -Drum: Ø 150 mm -Hole: Ø 72 mm -Quantity: 1x drum available -Dimensions:Ø 150 x 640 mm -Weight: 16.4 kg Njdpfxsvxp Uve Akislh

Condition: used, Standpipe valve for wash basin Nljdpfx Ajb Uhk Askish -Basin depth: 350 mm -Water level: 310 mm -Diameter: 60 mm -Number: 16x available -Price: per piece -Weight: 0.3 kg

Condition: used, Standpipe valve for wash basin Njdjb Uhkzepfx Akislh -Basin depth: 300 mm -Water level: 250 mm -Diameter: 60 mm -Number: 4x available -Price: per piece -Weight: 0.3 kg

Condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: WIPA, Radial fan pressure blower from friction disc friction washing system WTG75-15-500 -Type: Ø 600 mm -Motor: Unitec 15 kW / 2930 rpm -Volume flow rate: m³/min -Inlet connection: Ø 250 mm -Outlet connection: Ø 250 mm -Fan wheel: Ø 600 x 60 mm Nledpfxeziz A No Akijh -Dimensions: 1000/800/H1100 mm -Weight: 343 kg

Condition: used, functionality: fully functional, machine/vehicle number: H2X335P03330, Year of construction: 2003, operating hours: 4,972 h, load capacity: 1,800 kg, lifting height: 6,600 mm, fuel type: electric, mast type: duplex, construction height: 2,700 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X335P03330 Njdpfx Aksyhr A Sjiolh Mast type: Duplex Condition: Ready for use and fully functional Technical condition: normal Battery year of manufacture: 2018 Description: For sale is an electric 4-wheel forklift from the manufacturer Linde, type E18P-02. The vehicle is ready for use and fully functional. The visual and technical condition can be described as normal and corresponds to the age and use of the machine. With a load capacity of 1,800 kg, the forklift is suitable for a variety of applications in the warehouse, in production, and for internal transport. The forklift is equipped with a duplex mast and a lifting height of 6,600 mm with an overall height of 2,700 mm. The year of manufacture is 2003. A battery is included. A charger is not included but can be ordered upon request. The forklift is available immediately. Quick and straightforward transport is possible after consultation. Errors and prior sale are reserved. Sale is made excluding any warranty or guarantee. Side shifter, fork positioner, 3rd valve, 4th valve.

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. Nlodpozz Tm Rsfx Akijh 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, centre height / mm O. 600 mm Weight: 340 kg Nsdpfszcghfox Akielh

Condition: excellent (used), Winch rope, crane rope, hoist rope, wire rope, stainless steel rope, forestry winch rope -Manufacturer: GHD Görlitzer Hanf & Drahtseilerei, crane rope winch rope Ø 22 mm Nodpsvzp Saefx Akijlh -Nominal strength: 1960 N/mm² -Rope type: 6x36WS-IWRC -Length: 60 m -Quantity: 1x wire rope available -Shipping/Price: complete -also other crane ropes: available -Transport dimensions: Ø 820 x 620 mm -Weight: 196 kg

Condition: new, pressure: 60bending length: 1550column width: 1250daylight: 410stroke lenght (max.): 220column throat depth: 400messurements (LxWxH): 2445x2200x2390weight approx.: 4250motor power: 7,5 Standard equipment: KK Kletzer Europe We have put together a high-quality model for Europe. The CNC press brake KK-Industries made in Turkey. Model KKI EUROPE XL The powerful EUROPA XL press brake is characterized by its high precision, accuracy and versatility. Europa XL has a very large installation height and, as a result, a large stroke (cylinder travel). The projection is also above average in order to restrict yourself as little as possible. We rely on quality, which is also reflected in the management. As a standard control we have the high-quality Esa S640 (2D graphic control) Furthermore, the press brake KKI Europa XL is equipped with Y1, Y2, X via the control. We don't make any compromises when it comes to the upper tool and the die either Nsdpfx Aed En R Dskislh the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is only as good as the service. For this reason we set our focus on highly qualified employees with many years of experience in the CNC sheet metal processing sector. CNC axes Y1, Y2 , X  Esa S640 (2D graphic control) Back gauge with double linear guide and ball screw 2 pieces of support arms in front, heavy version, height adjustment with hand wheel, from 175 tons heavy version on linear guide Laser safety device on the upper beam CE protective equipment various options available Option: r-Achse                                                                                   ¤ 5.375,-- Other controls: ESA 640 2D 15'' touch screen control                                     ¤ 4,520.00 inkl. ESA 675 W 3D 21'' touch screen control (Windows Base)      ¤ 6,485.00 DELEM 66 T 2D 17'' touch screen control (Windows Base)    ¤ 10,165.00 DELEM 69 T 3D 17'' touch screen control (Windows Base)     ¤ 16.350,00

Condition: good (used), Clamping table, clamping angle, T-slot table, milling machine table for shaping machine, shaping machine, high-speed planer, broaching machine, slotting machine, slotting machine, slotting tool, broaching machine, shaping machine, horizontal shaping machine, planing machine, Schepping Nodpfxeiaql Te Akijlh -T-slot plate: Mounting plate with adjustable angle of inclination -Groove width: 20 mm -Slot spacing: 105 mm -Overall dimensions: 640/400/H360 mm -Weight: 103 kg

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 7.10 kg Your contact persons in our company: Nljdpowl Ncfofx Akieh Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6 mm Nljdsvznikopfx Akijh -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 80, see photos -Weight: 11 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 100, see photos -Weight: 11 kg Nledpfsvzng Njx Akioh

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade -Saw blade: blank Ø 460 x 5 mm Nlodpfx Ajvzni Rskish -Inside: Ø: 50 mm -Bolt circle: Ø 100 x 18 mm -Number of teeth: 54, see photo -Weight: 5 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade Nedpovzmx Dofx Akislh -Manufacturer: Wagner, saw blade copy blade Ø 560 x 6.5 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: 120, see photos -Weight: 12 kg

Condition: good (used), Year of construction: 2010, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor -Manufacturer: Transnorm, belt conveyor type 1100 -Speed: frequency-controlled, up to 83.5 m/min -Drive: SEW-Eurodrive 1.1/0.11 kW, see photo of nameplate Nlsdpfx Asihc Uwekijh -Brake: 10 Nm -Belt width: 600 mm -Conveyor length: approx. 7290 mm / approx. 780 mm height adjustable -Installation dimensions: 7290/860/H340 mm -Transport dimensions: 4230/860/H570 mm -Total weight: 358 kg

Condition: good (used), Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm Njdpfjrw Dalox Akielh -Weight: 6.6 kg