Used Emit Typ: Ta0O1000/15 for sale (19,985)

Condition: good (used), Year of construction: 1985, functionality: fully functional, total height: 2,480 mm, total length: 2,300 mm, total width: 2,400 mm, overall weight: 4,750 kg, spindle speed (max.): 6,000 rpm, Manufacturer Mazak with chip conveyor and accessories Type VQC-15/40 Year of manufacture 1985 Technical data X-axis travel 560mm Y-axis travel 410mm Z-axis travel 380mm Control system Mazatrol CAM M-2 Table length 900mm Table width 410mm Workpiece weight 300kg Tool changer 30 Spindle taper CAT 40 Max. spindle speed 6000rpm Spindle motor power 7.5KW Length x width x height 2300.0 x 2400.0 x 2480.0 Lasdpjzq Hwnsfx Akweh Weight 4750 kg

Condition: used, TERMIK Range Gas or diesel-powered 5 decks, 15 openings Usable area: 23.10 m² With integrated loading elevator Maximum power: 128,000 kcal/h, equivalent to 149 kW Forced hot air circulation 2 fans on the 180 series High-efficiency heat exchanger Heat distributed between ceiling and floor Independent steam generator per chamber Steamers located near the combustion cylinder Steamers’ power consumption: 1.5 to 2 kW Standard steam generator: 4 kW Stainless steel and tempered glass doors Removable doors for cleaning Overpressure valves on each chamber Electrical panel with IP55 protection Steamers accessible from the front Internal dimensions: 1850 x 2500 mm External dimensions: 2485 x 3650 mm Loading clearance: 3060 mm Used Tagliavini CT 185/L cyclothermic oven – 23.10 m² baking area Lajdpfx Aezyaktjkwjh General Overview The Tagliavini TERMIK CT 185/L is a professional, multi-deck cyclothermic oven designed for bakery operations that require a large baking area and even heat distribution. This configuration features 5 baking chambers for a total usable area of 23.10 m², with internal dimensions of 1850 x 2500 mm. The cyclothermic principle is based on the forced circulation of heat from the combustion chamber. In the 180 series, two fans direct the heat flow through the ducts surrounding the chambers, achieving a balanced temperature from the bottom to the doors. The CT 185/L can operate on gas or fuel oil/diesel.

Year of construction: 1994, condition: used, Technical data: - Manufacturer: Cefla with cross axle - Type: TN/L - Length: 1740 mm - Belt width: 1.400 mm - Total width: 1.600 mm - Height: 950 mm - Year of manufacture: 1994 - Feed rate approx. 2 - 8 m/min. - FU control for feed rate 50 Hz Lodpoya H Hisfx Akweah - Frequency converter required on site - Location: in stock - Volts, Hz 400 / 50 - Motor power 0.75 kW - Voltage fluctuations max. +/- 5% - Location: in stock

Condition: new, Year of construction: 2026, load capacity: 15,000 kg, Column lift rotating device, 15 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set, synchronized, or individually. Protec reversing device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Ledpfxjw Nilao Akwoah Column adjustment, 2x electrically powered (at extra cost). Lifting capacity 15,000 kg, 360°. Torque 21,000 Nm. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Speed: 0.5 rpm. Clamping plate diameter: 1,000 mm. Rotating drive: 2 x 2.2 kW. The price refers to one unit with an electric carriage, including. The second unit as a set is 20% cheaper. Available with a universal joint flange (cardan flange) upon request.

Condition: reconditioned (used), working length 3600 mm Working width 1140 mm Working height 820 bis 1050 mm WEINIG RF15 Return Conveyor System ----- Suitable for use after a chamfering, planing, and milling machine with a maximum feed speed of approximately 22 m/min. For the continuous return transport of workpieces to the operator. After passing through the planer, the workpieces are transferred to a roller conveyor, where they are conveyed transversely and then taken over by a driven roller conveyor. This conveyor directs the workpieces onto a downstream longitudinal roller conveyor back to the operator and also serves as a parts buffer. Manufacturer’s technical specifications: Workpiece length: 250–3,600 mm Workpiece width: 30–230 mm Min. workpiece thickness: 10 mm Max. feed rate of the planer: 22 m/min Cross conveyor with 2 integrated roller conveyors: Cross conveyor length: 1,140 mm Constant conveyor speed: 30 m/min Max. cycles per minute: 40 Roller conveyor length: 2,200 mm Constant speed: 30 / 60 m/min Gear motor: 1 kW (1.3 PS) Operating voltage: 220/380 volts, 50 hertz Compressed air connection: 6 bar Longitudinal roller conveyor (non-driven): Length: 1,700 mm Width: 160 mm Swing-mounted, adjustable incline Lajdexpn Tnepfx Akweh Special equipment: Extension of the longitudinal roller conveyor (non-driven) by 3,000 mm ----- Price of the above machine available upon request! ----- (Technical data according to the manufacturer—subject to change without notice!)

Condition: reconditioned (used), Number of spindles 8 St. Working width 230 mm Working height 120 mm Weinig Planing and moulding line ----- Consisting of the following individual machines: Item 1: Weinig Profimat 23 E, four-side planer, stock number: 2803 5 spindles + glazing bead saw Item 2: Weinig Uniplan 23, stock number: 2804 Fine and hydroplaner with 2 horizontal spindles Lodpfx Ajxpn Tuokwjah Item 3: Weinig RF 15, stock number: 2805 Longitudinal-cross-longitudinal conveyor with workpiece return to the operator Detailed descriptions of the machines can be found under the mentioned stock numbers. (Technical specifications according to the manufacturer, without guarantee!)

Condition: new, Year of construction: 2024, color: red, loading space volume: 20 m³, loading space width: 2,500 mm, loading space length: 6,900 mm, loading space height: 1,250 mm, gearing type: other, driver cabin: other, Vehicle location: in transit, Structure: ARCHIVE IMAGES Roll-off container for water in accordance with DIN 14505 - Water transport for at least 10,000 liters - Length: approx. 6.90 m - Width: approx. 2.50 m - Height: approx. 1.25 m - Permissible total weight: 14,000 kg - Roll-off frame must be manufactured in accordance with DIN 14505:2015 - Water tank with baffles - Dome cover 60 x 60 cm square or round (diameter 60 cm) as entry and cleaning opening - Ventilation valve - Equipment compartment in the rear area for storing 2 B 5m filling hoses, folding containers (Husky 3000 Gal.) and water-carrying fittings, size: min. 80cm deep, 200cm wide, 100cm high, closed with a simple closing flap system or roller shutter - Complete emptying must be possible without a pump at the rear, e.g. two emptying nozzles min. DN 100 with shut-off valves and Storz A coupling DN 125 in the middle of the container with a shut-off valve, also accessible at the rear - Two access nozzles DN 75 with Storz B coupling and shut-off valve, free inlet into the tank, pipe routing in the lower area of the roll-off container on the right and left or both at the back, led outwards - Automatic ventilation and final ventilation valve, volume flow min. 3,000l min - Water level indicator - Color: red RAL 3000 - Storage box for 2 A hoses, dimensionally stable 5 m in roof box design - Plastic coating inside - with overflow possible for use on 3-axle vehicles (tank approx. 11,500L capacity) Delivery time approx. 10 - 12 weeks Available from 5,000-25,000 liters Price depending on the number of liters between EUR 10,000.00 to approx. EUR 20,000.00 per number of liters/volume Available with self-priming water pump, self-lubricating with separate motor, delivery capacity: 129m³/hour 2000l/min, pump height: 17m, grain size: 28mm, fuel diesel, tank: 4.3 ltr., see 2907 for an additional charge of EUR 4,000! Ledpfxevhmqys Akwoah Available as a roll-off container and tank ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: new, 15000 kg height 790 - 1350 mm width 1400 mm ja 790 - 1350 mm 120 x 1400 mm Support stand, assembly stand, steel stand, welding table, assembly table, steel trestle, work trestle - Our jack stands are characterized by their stable construction, high load-stable stability and indestructible service life. - powder-coated in RAL 5010 gentian blue - CE marking - Transport on request Laodpfxjyt R I Re Akwoh

Condition: used, bore capacity in steel (diameter) 15 mm throat 220 mm bore stroke 80 mm 2 Lodpeyf N Erefx Akwoah speeds 320 - 1600 U/min table-size 350 x 285 mm weight 125 kg dimensions 700 x 600 x 1500 mm Features: - Microdosing - Thread cutting M2-10

Condition: good (used), Year of construction: 1997, machine/vehicle number: 057013, Offer 26204 Technical data: - Adjustable work position with tilt function - Sanding belt dimensions approx. 50 x 2000 mm - 2 speeds - Fine adjustment of the sanding belt - Contact wheel diameter 250 mm - Shaft diameter (left) 20 mm Laodpfjz Dulkox Akwjh - Usable shaft length 35 mm - Motorized dust extraction - Drive 400 V / 0.9 / 1.3 kW - Space requirement approx. W 950 x H 1750 x D 750 mm - Base frame height 520 mm - Weight approx. 200 kg

Condition: excellent (used), Year of construction: 2006, operating hours: 5,500 h, functionality: fully functional, VEMAG HP 15C with Wolf attachment Operating hours: 5500 Recently serviced Year of manufacture: 2006 Lodpfsz I Uz Tsx Akwsah 24 kW Includes many accessories, fully functional Shipping possible

Condition: new, Year of construction: 2026, Airflow capacity 15,000 m³/h Motor power 18.5 kW (25 HP), 3,000 rpm Air velocity 40 m/s Filter dimensions Ø160 x 940 mm Number of filters 117 units Filtration area 59 m² Chip collection 2x big bag (total: 2,500 liters) Lajdpfx Akez I Sdljwoh Inlet diameter Ø400 mm Dimensions 1,670 x 4,000 x 3,630 mm Weight 1,150 kg Operating temperature -20°C to 40°C

Condition: used, functionality: fully functional, machine/vehicle number: 33062, overall weight: 18,000 kg, first registration: 08/1994, loading space volume: 15.1 m³, suspension: air, color: orange, Chassis consisting of 2 BPW axles, 9 tons each, air-suspended, with single tires, plastic fenders, disc brakes, and an automatic, load-dependent all-wheel drive compressed-air braking system with WABCO EBS. Includes a drawbar guard, underrun protection, drawbar length of 2,200 mm with retaining spring, and air connector for trailer (Duomatic). The boiler has an air volume of 15.1 m³, a wall thickness of 6 mm, and the usable volume of the sludge chamber is reduced to approximately 12.8 m³ by the displacement piston. The full-size top cover can be hydraulically opened upwards. The cover locking mechanism features a galvanized, hydraulically operated latch. The upper and lower suction connections are manually operated in DN 100. Includes a Perot connection and a blank coupling. The tank content indicator has an internal float and an external scale; the display is in 500 l increments for both with and without the piston. The discharge chute is made of aluminum, and emptying is achieved through free discharge, pressurization, or by means of the displacement piston. The piston is locked using a pair of manually operated locking bolts. 2 piston seals with pressure regulation are located at the control panel. The suction line runs on the left side. Hose boxes made of aluminum are located on the right and left sides of the superstructure, designed for circumferential hoses. A lockable plastic toolbox is included. The control panel is made of stainless steel and is located at the rear right. 1 LED rotating beacon is mounted on the superstructure at the rear, and 1 LED ambient light is mounted on each side (left and right) and at the rear of the tank, each with an LED spotlight. Laodpfx Aez Hxwiokwsh

Condition: ready for operation (used), functionality: fully functional, WALTHER TROWAL Type 650 incl. noise protection cover / centrifuge / control cabinet & platform -Drum diameter 1600mm -Coating in good condition -Rotational speed 1450 rpm -Timer -Control cabinet -Centrifuge -Noise protection cover -Work platform -Power 11 KW Lsdpfx Aoz N S I Uekwsah Errors and omissions excepted.

Condition: used, Year of construction: 1989, • pneumatic Lodpfelkdy Eox Akwsah • Operating pressure max. (bar): 8 • Weight max. (kg): 80 • Included tools: included (see photos)

Condition: excellent (used), IM Very good condition. Lsdpsw N Nzhsfx Akwsah

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 800 h, power: 5.5 kW (7.48 HP), first registration: 12/2025, color: grey, Dry hay, biomass or a drying container with an air volume you set yourself, instead of running a fan flat out and paying for it. This Karl Barth AG Ventomat SE-1-100-4p was bought in December 2025 and used for only approx. four months. It runs perfectly and comes as a complete working setup, not just the fan: factory-configured 5.5 kW Invertek Optidrive E3 frequency inverter with disconnect switch, duct cone and reduction, plus a free 10m Ø400mm fabric hose. New purchase price approx. CHF 8,507. Only one available - sold as one complete set with the inverter, ducting accessories and hose. Once sold, it's gone. Best for: hay drying, biomass drying, drying containers and agricultural ventilation where you want to control air volume rather than run flat out. Not suitable for: corrosive or heavily dust-laden air streams, or ATEX zones unless independently verified. What the specs mean in practice: • 5.5 kW motor, 4 kW rated fan output - sized for continuous hay/biomass drying, not short bursts • Factory-configured Invertek Optidrive E3 inverter - set air volume to the crop and its moisture, cutting energy use • Inverter in IP66/NEMA4X with disconnect switch - mounts in a dusty barn without a separate control cabinet • Duct cone 222/563 to D400mm and D750/D600mm reduction - connects to existing ducting, no custom fabrication • 10m Ø400mm flexible fabric hose included - place the fan where it fits, duct air where needed • Painted sheet metal, single-suction Swiss build (Karl Barth AG) - serviceable and supported locally Complete package includes: Ventomat fan, Invertek Optidrive E3 5.5kW inverter with disconnect switch, duct cone 222/563 to D400, duct reduction D750/D600 with flange ring, and a 10m Ø400mm fabric hose at no extra charge. Buying/configuring the inverter alone is a substantial separate cost. Technical data: – Manufacturer: Karl Barth AG, Dättlikon (CH) – Type: Ventomat SE-1-100-4p – Rated output: 4kW – Motor: 5.5kW, 4-pole – Construction: Painted sheet metal, single-suction – Inverter: Invertek Optidrive E3, ODE-3-340140-3F4B, 5.5kW, IP66/NEMA4X – Inverter input: 380-480V, 3-phase, 17.2A – Inverter output: 0-480V, 3-phase, 14.0A, 7.5HP Laedpfx Aozrzizekweh – Duct connection: 222/563mm to D400mm, plus D750/D600mm reduction Condition: Barely used (~4 months), technically flawless, fully functional. New price (Dec 2025) CHF 8,507.45 incl. VAT. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). Buy with confidence: purchased Dec 2025, used ~4 months for hay drying/drying container, technically flawless. Inverter can be demonstrated running under load; nameplate photos and a running video available. In-person inspection in Kerns OW by appointment. Why buy now: near-new, factory-configured Swiss unit sold as one complete set - fan, inverter, cone, reduction and hose stay together. Once sold, this configuration won't return at this price. Discount if you're quick: if you buy it till 31.10.2026, we give you a 500CHF discount on the price. Action: send your intended application, required capacity and destination - we'll confirm suitability and a transport estimate.

Condition: used, machine/vehicle number: 008005, Max width workable: 2440 mm Laodpewu Aacsfx Akweh

Condition: good (used), Year of construction: 1998, operating hours: 89,340 h, functionality: fully functional, screw diameter: 90 mm, overall weight: 16,000 kg, clamping force: 650 kN, total width: 2,750 mm, total length: 5,600 mm, total height: 3,200 mm, Manufacturer: Sterling Model: 15 LBS Year of manufacture: 1998 Operating hours: 89,340 h Lsdpozfxwiefx Akwoah Closing force: 650 kN Screw diameter: 90 mm BM Sterling APV, year of manufacture 1998 Complete control system replacement in 2008 with MACO-sys 6000, carried out by Davies-Standard LTD PRICE REDUCTION OF 30%!!! Net price: from 45,000 EUR to 31,500 EUR!!!

Condition: excellent (used), Demag crane P-Zug 3.2 t – Type P208H11, four-strand, with fast and precision lifting. Length: 1150 mm, height: 350 mm, width: 330 mm. Ledpeyxbxxsfx Akweah

Condition: used, Industrial vacuum filler Vemag HP 15 E A reliable German powerhouse for medium-sized and large butcher shops. Ideal for the production of all types of sausages, frankfurters, pâtés, and processed meat products. Main advantages: Perfect product quality: The gentle conveying system protects the filling material, guarantees a clear cut, and prevents air inclusions. Highest weight accuracy: The precise servo drive portions to the gram, which minimizes raw material loss. Versatile: Seamless synchronization with all common clipping machines (Poly-Clip, Alpina), cutting and forming lines. High performance: Processes even very firm and cold masses effortlessly with a filling pressure of up to 45 bar. Technical data at a glance: Filling capacity: up to 14,000 kg/h Ljdpezcazfjfx Akwoah Portioning speed: up to 700 portions/min. Portioning range: from 5 g to 100 kg Hopper capacity: 250 / 350 liters Control: Vemag PC control (graphic display, program memory)

Condition: used, functionality: unexamined, machine/vehicle number: MTRE 15-9/5 | 10-10/10 | 5-10/10, Used Grundfos MGE112MC2 Centrifugal Water Pumps Manufacturer: Grundfos Various configurations: Pump MTRE 15-9/5 | Controller MGE112MC2 Pump MTRE 10-10/10 | Controller MGE132SD2 Pump MTRE 10-10/10 | Controller MGE112SB2 Laedpsxphqtjfx Akwjh Pump MTRE 5-10/10 | Controller MGE1100LC2 Weight: varies from 42 to 74 kg. Power: ranges from 4.0 to 7.5 kW Voltage: 50/60 Hz, 380-400 Volt.

Condition: excellent (used), Simodrive feed model Manufacturer: Siemens Type: 6 SC 6116 OAAOO Ledpfofhkt Rox Akwjah G 600 D 490 / 49 M6 REQ Output current: 60/120 A Space requirements: W 290 x D 150 x H 480 mm Weight: 13 kg

Condition: excellent (used), Face milling cutter (28148) Lodpfxog Er H Rj Akwsah Manufacturer: ISCAR 139.8 mm cutting diameter 7.15 mm maximum depth of cut Accommodates 8 cutting inserts Weight with carton: 3.8 kg

Condition: used, 8 Multi-rib profile calibration mandrels in wooden cases Ledpfx Ajctiwiskwoah L 4734-44