Used Elumatec Elumatec Pvc Profile Processing Center. for sale (37,572)

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 19500624, functionality: fully functional, operating pressure: 7 bar, rotational speed (max.): 18,000 rpm, working height: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €950,000! TECHNICAL DETAILS Milling units / Motor power Motor power, small milling cutter: 0.27 kW Frequency, small milling cutter: 300 Hz Speed, small milling cutter: 18,000 rpm Motor power, large milling cutter: 1.1 kW Frequency, large milling cutter: 200 Hz Speed, large milling cutter: 12,000 rpm Tool data / Milling cutter data Collet diameter, small milling cutter: max. 8 mm Milling cutter diameter, small milling cutter: max. 8 mm Collet diameter, large milling cutter: max. 10 mm Milling cutter diameter, large milling cutter: max. 14 mm Electrical data Operating voltage: AC 400 V 3 N/PE Frequency: 50 Hz Rated current: 35 A Control voltage: 24 V Pneumatic data Working pressure: 0.7 / 1 MPa (7 / 10 bar) Compressed air consumption: 170 l/min Load limit of pneumatic lines at 70 °C: approx. 15 bar Working height Working height: 1,000 mm Kodpezlnxiefx Adqsdr EQUIPMENT Clamping units Vertical clamping Maintenance unit with filter pressure regulator Control cabinet / Saw with lockable main switch Cutting unit: Allows cutting angles of 45 degrees and 90 degrees Machining units: Includes machining units and profile bearings Tools: Two screwdrivers, three cut-off wheels

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Equipment and technical data: - For classic nesting machining with a spoilboard - Machine frame of welded construction with ground and hardened prismatic guides for the moving column, aggregate head and consoles - Moving column in gantry design - Rack-and-pinion drive, helically toothed, in the X and Y directions, ball screws in the Z direction for precise positioning - Machining dimensions: - Max. support surface on nesting table: X = 3100 mm Y = 1560 mm Kdedpjzlbrpsfx Adqjr - Max. travel: X = 4695 mm Y = 2100 mm Z = 293 mm - Max. clearance height DYNESTIC table Z = 100 mm from top of table (without spoilboard) - Maximum programmable speed vector speed: 128 m/min X = 80 m/min Y = 100 m/min Z = 25 m/min - DYNESTIC table: - Fixed, continuous machining table with grid layout - continuous grooves in the X and Y directions - groove spacing 50 mm - with 25 metres of sealing cord for clamping the spoilboard - Vacuum zones: single-circuit vacuum system - Drilling unit 7877: - 19 spindles - drive power: 1.7 kW - 13 vertical spindles: - individually selectable - U-shaped arrangement - 5+4 in the X and 4 in the Y direction - 32 mm grid - max. drill diameter: 35 mm - total drill length: 70 mm from screw-on end (depending on panel thickness) - spindle extension stroke: 70 mm - direction of rotation: clockwise / counter-clockwise alternating - n(max): 1000 - 4400 rpm infinitely variable - fitting: M 10 thread - fit 11 mm - without tool, without holder - 6 horizontal spindles: - 2 double drilling spindles in the X direction - 1 double drilling spindle in the Y direction - fitting: M 10 thread, fit 11 mm - total drill length max. 63 mm from screw-on end - without tool, without holder - Milling unit 7842: - power: 12.0 kW (S6) - n(max) = 1000 - 24000 rpm infinitely variable - max. power at 12000 rpm to 24000 rpm - air-cooled - with HSK-F 63 tool holder - with right-hand thread nut (for right-rotating tools) - with collet chuck with HSK shank - ceramic ball bearings (hybrid bearings) - tool weight max. 6 kg (incl. holder) - tools: milling and grinding tools max. Ø 160 mm - Safety guarding in accordance with CE standard - Protective fence at the sides and rear - Vacuum pump: 500 m³/h, dry-running - Personal safety via light barriers in the front area of the machine - Hand-held control unit for remote control of the machine with the following operating functions: - start / stop of the machining program - speed control of the machining cycles - reset button - manual feed / rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine licence consisting of: - CAMPUS NC-HOPS: - graphical variant system with WOP and CAD/CAM properties for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined lubrication intervals - Additional sealing against dust through overpressure in every guide carriage - Simultaneous lubrication: - for all linear guides in the X, Y and Z directions - for all ball screws in the Y and Z directions - for all milling spindle guides - for tool changer guides (except pick-up tool changer) - All console guides are not lubricat...

Condition: used, MEP Syntax Line 25 Automatic Rebar Processing Center, Used Machine Manufacturer MEP S.p.A. (Made in Italy) Model Syntax Line 25 Machine Functions Automatic straightening from coil Hydraulic cutting CNC-controlled bi-directional bending Processing Capacity (Rebar from Coil) Single-wire operation: Ø8 mm to Ø25 mm Double-wire operation: Simultaneous processing of 2 bars from Ø8 mm to Ø16 mm Material Storage Storage capacity: Up to 14 m³ Manual loading Collection tray: 12 × 2.5 m Kodpfx Adjzg Uv Deqodr Overall Dimensions Width: 17,400 mm Depth: 2,400 mm Height: 1,600 mm Condition The built-in monitor is not operational. The machine is equipped with a video output, allowing an external monitor to be connected for operation.

Condition: new, Year of construction: 2024, functionality: fully functional, Clamping range 25 mm ID to 120 mm OD Kdjdpfxjvr Ec As Adqor Electric drive: 1050 W, 230 V, 50 Hz Speed of the tool carrier unloaded 150 rpm, nominal 70 rpm Clamping with wrench Tool feed by hand Weight approx. 6.5 kg Incl. operating instructions In wooden box Incl. 1 planing knife 90 ° and 2 chamfering knives 30 °

Condition: good (used), functionality: fully functional, Year of construction: 2005, It is important to know that a total of two welding machines and two CNC corner cleaning machines are available, comprising two complete production lines. The machines are operational and still in daily use. CE Conformity: Yes (CE marking on the machine) Power supply: 400 V Frequency: 50 Hz Kodpfx Adjyyavrjqsdr Current connection: 25 A Main switch: Industrial main switch with safety interlock Operating air pressure: 7 bar Main components - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic press units - Electronic temperature control - Central control unit - Safety light curtain Operation Profile clamping – Insertion of the heated welding plate – PVC melting – Application of welding pressure – Welding cooling – Removal frame The system operates semi-automatically/automatically. ``` Includes: - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Operator panel and industrial PC Control system Industrial PC control Safety system - Light curtain - Emergency stop button - Safety covers - CE conformity Powered up in Hungary, the system can be dismantled and delivered in approximately June.

Year of construction: 2007, condition: ready for operation (used), CNC Machining Centre for Sale – Elumatec SBZ 130 Manufacturer: Elumatec Model: SBZ 130 Year of manufacture: 08/2007 Price: 24,900 EUR excl. VAT Condition: Very good, regularly serviced by authorized Elumatec service in the Czech Republic Availability: Immediately available Kdedpfeyt E D Tsx Adqor Documentation: Photos and video of the machine available Machine Description 3-axis CNC machining centre designed for processing aluminium and steel profiles. The machine enables efficient serial production thanks to pendulum (right/left working zone) machining mode. Particularly suitable for manufacturing window, door, and façade systems. Key Advantages • Regularly serviced by authorized Elumatec service in the Czech Republic. • Robust and reliable construction with an approximate weight of 5.5 t guarantees stable and precise machining. • Pendulum machining mode significantly increases production productivity. • The machining centre is fully operational and ready for immediate deployment. Technical Specifications • Number of axes: 3 • Turret head: 8 tools • Maximum machining length: 6500 mm • Pendulum machining mode: yes (right/left side) • Automatic positioning clamps: 8 pcs • Power consumption: 8.5 kW • Spindle power: 5.5 kW • Max. spindle speed: 6000 rpm • Clamping pressure: 7 bar • Traverse speed: - X axis: 34 m/min - Y + Z axis: 18 m/min • Machine weight: approx. 5.5 t Additional Information • Additional photos and video of the machine available on request • On-site inspection possible by prior arrangement

Year of construction: 2012, condition: used, 4-axis machining center with 8-way tool changer for aluminum or PVC profiles Max. processing length: 7,600 mm Y-axis travel: 850 mm Z-axis travel: 650 mm Swivel angle A-axis: 0° - 180° Max. speed 21,000 rpm Weight: approx. 5,000 kg New Windows PC in 2022 Minimalmengensprühung Spanner capture and automatic shifting 8 pneumatic workpiece clamps Pendulum operation through two light barrier areas Spindle in like-new condition (15.5 kN pickup force) Elusoft dongle for programming on external PC Loading is included in the price Kdjdpfezf I Uwox Adqer

Year of construction: 2005, condition: used, functionality: fully functional, machine/vehicle number: 1223030045, elumatec SBZ 122/30 profile machining centre, 3-axis controlled, machining length 3,850 mm Kedpfxezgv Hws Adqjdr - 2 tool magazines - 2 mitre heads - profile length measurement - 4 pneumatic clamps - automatic clamping adjustment - manual control panel - E550 control unit - spindle with 6 kW power - light curtain safety system Video of the machine in operation available upon request.

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Kdodpfx Adezqggvsqer Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR Basic Space requirements (approx. dimensions) ----- ...

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2450099150, 1 No 2019 Elumatec MGS245/00+AMS Upstroke saw with 6.7m infeed roller bed, with 7.6m outfeed roller bed – however, calibrated cutting unit to 6.8m Saw fitted with calibrated automatic measuring system for accurate cutting This machine can cut straight cuts, mitres up to 55 degrees and compound mitres. Straight cut maximum in table below. Max Width of material cutting 455mm Ksdpfjzupzqox Adqsdr BUYER TO ARRANGE COLLECTION OF SAW WE CAN ASSIST WITH LOADING ONTO SUITABLE VEHICLE

Condition: used, Pneumatic Glazing Bead Saw / Mitre Saw – Elumatec GLS 192/06 – Year 2005 with electronic positioning system for cut length management. Equipped with a protected cutting unit featuring integrated safety systems, electronic control, and a robust structure designed for intensive industrial use. The machine ensures precise machining operations with high productivity and excellent cutting quality. Main Features: Brand: Elumatec Model: GLS 192/06 Application: cutting PVC and aluminum profiles Heavy-duty industrial frame with high rigidity Cutting area protection system Ergonomic and user-friendly controls Suitable for window and door manufacturing Used machine in good working condition Technical Specifications: Kdsdpjy Uw Easfx Adqer Blade diameter: 200 mm, 98 mm (45° mitre cut) Blade speed: 2,800 rpm Cutting unit feed: pneumatic Output power: 900 W Power supply: 3/PEN 400 V Frequency: 50 Hz Current: 4.8 A Installed power: 1.8 kW Speed: 2800 rpm Operating pressure: 7 bar Dimensions: approx. 5100 x 1050 x 1180 mm Weight: 140 kg Ideal for: Window and door production PVC/aluminum frame workshops Precision industrial machining operations

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum sheet thickness (stainless steel) 1.5 mm Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bend on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Kdjdev A Tfgjpfx Adqer Machine height 2500 mm Total weight 20000 kg Power 25 kW Frequency 50 Hz Pressure 6 bar Loading system Blank Feeder with portal

Year of construction: 2011, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. processing length: 18.000 mm Travel Y-axis: 1150 mm Travel Z-axis: 715 mm A-axis swivel angle: 0° - 180° Angle C-axis: 0° - 180° Max. speed 24,000 rpm. Spindle power: 21 kW Tool changer with 13 standard and 7 special tools Many tool holders, including angle head and saw blade Saw blade diameter: 500 mm Kdsdpfx Aozcm A Nedqer minimum quantity spraying Autonomous belt tensioner shift 20 pneumatic material clamps Pendulum operation through two light barrier areas label printers Barcode scanner chip conveyor belt suction Manual control console Spindle in like-new condition (infeed force is approximately 16 kN) Loading is included in the price Weight: approx. 14,000 kg

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 3 mm, overall weight: 15,000 kg, input voltage: 400 V, bending angle (max.): 180 °, working length: 3,200 mm, working range: 3,200 mm, Equipment: documentation/manual, safety light barrier, Technical features: Year 2013 Kdedpfjwq Rumox Adqor Working length 3200 mm Maximum sheet thickness (iron 400 N/mm2) 3.00 mm Maximum sheet thickness (stainless steel) 2.00 mm Maximum sheet thickness (aluminum) 4.00 mm Maximum bending height on four sides 250 mm Upper jaw stroke 650 mm

Year of construction: 2008, condition: like new (used), functionality: fully functional, Elumatec SLK 118 3-axis CNC profile machining center. Bar processing center with 3 controlled axes; designed for machining aluminum and thin-walled steel profiles and extrusions, as well as aluminum, PVC, and lightly alloyed steel. Especially suitable for companies processing Neher insect screen profiles or those looking to automate their door production. Machining from above; workpiece rotation for processing the opposite side. Technical Data: Travel range X-axis: 2450 mm / max. speed 36 m/min Travel range Y-axis: 350 mm / max. speed 15 m/min Travel range Z-axis: 280 mm / max. speed 15 m/min Kdsdsyr Ai Dspfx Adqsr Spindle speed: 18,000 rpm. 6.5 HP (4.5 kW) motor-driven spindle Minimum quantity cooling system Dimensions: 3100 x 1850 x 2250 mm (122" x 73" x 89"). Weight: 1,400 kg (3,087 lbs). Equipment: PC touchscreen control with Windows software, 4 material clamps The machine is in exceptionally good condition.

Condition: like new (used), Year of construction: 2020, operating hours: 574 h, functionality: fully functional, consisting of: additional vacuum tank for workpiece clamping, complete with vacuum distributor and control logic for automatic cycle KW6.6 / 9 HP (S6) electrospindle teleservice system cable remote control for easier positioning and adjustment Robot: automatic loading and unloading system for glass sheets Loading and unloading trolley with lockable wheels Mechanical/electronic device on the robot head for centering the workpiece on the working surface Pneumatically retractable workpiece stop Various double vacuum suction cups Various tool sets incl. reverse osmosis system type IDROTECNICA "IDRO RO 130 ST" max. 130 l/h VERTICAL 500 plastic storage tank 500 l Stand for storage tank SE15002 conductivity test kit incl. FILTRAGLASS ECO-BOX CNC grinding coolant water treatment unit incl. stainless steel chamber tank approx. 3,000 l, 3,000 x 1,000 x 1,000 mm, 3 chambers, circulation pump, agitators, filter system approx. 800 x 600 x 1,780 mm, electrical connection 230 V / 1.5 kW, compressed air connection on-site 7-8 bar (480 Nl/min) Dismantling/removal to be carried out by the buyer Kdodpfx Asw H R A Njdqer

Condition: used, Year of construction: 2012, operating hours: 8,600 h, functionality: fully functional, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness copper (max.): 5 mm, For sale: Combined sheet metal and tube laser cutter BLM ADIGE-SYS LT COMBO. This machine is designed for both sheet, tube, and profile cutting in a single system – an ideal solution for versatile and flexible production. The machine is connected and fully operational; it can be inspected and observed working in real time. Single owner. Full service history available, the machine has been regularly maintained with annual servicing. Manufacturer: BLM Group Model: ADIGE-SYS LT COMBO Year of manufacture: 2012 Technology: Fiber laser Source: 3 kW LT Combo Tube and profile cutting diameter: 16 – 225 mm Tube input length: 6.1 m; output length: 6.1 m Cuts to zero – leaves no remnants Sheet table: 1500 x 3000 mm Cutting capacity: ALU 10 mm; Stainless Steel 12 mm; Brass 5 mm; Steel 20 mm Laser cutting hours: 8,600 h (as of 2026-02-27) Total machine hours: 72,000 h (as of 2026-02-27) Other: spare laser cutting head included If you have any further questions, we would be happy to assist you. Kdsdpfxoyaavde Adqjr

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: KF0310KMB20260601, type of input current: three-phase, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, space requirement length: 6,200 mm, space requirement height: 2,650 mm, space requirement width: 2,500 mm, controller manufacturer: Self-developed brand, workpiece length (max.): 2,500 mm, workpiece height (max.): 160 mm, nominal power (apparent): 45 kVA, number of spindles: 14, Key Product Features & Technical Parameters of KMB2500 Bending Center(Panel Bender)1. Core Product Features Bending Capacity - Fast bending: 0.2s per stroke, one-step forming - Universal dies for arc, hemming & multi-angle bending, cut mold & labor cost - Processes carbon steel, stainless steel, aluminum, film-covered sheets - Switchable edge/corner positioning for consistent precision; 3 processing modes (High Precision/Standard/Ultra-Fast) Mechanical Structure - Stress-relieved welded steel frame, higher rigidity & anti-resonance than cast frames - Press-arm feeding unit: 120m/min max feed speed, 1.9G acceleration - Hardened heavy-duty bending knives for long service life - Brush & ball worktable, auto lubrication, visual unbalanced load warning Kdedpfx Adjxu Uhvoqjr Intelligent Control - EtherCAT full closed-loop bus system, up to 64 axes, 2ms refresh, ±0.01mm accuracy - Auto angle/rotation compensation, die collision avoidance, offline simulation - IoT & cloud access, remote diagnosis & upgrade; reserved robot/production line interfaces - Simple graphic programming, low operator skill threshold Operation Merits - Full servo drive, low power consumption, low maintenance, ~55dB low noise 2. Technical Parameters -ower: 380V, average 7kW; Overall size: 6200×4500×2650mm - Max bending size: 2500×1250mm; Min thickness 0.3mm - Max thickness: 3mm steel/stainless steel, 4mm aluminum - Bend angle: -90°~90°(≤2.5mm steel), 0°~180°(≤2mm steel) - Max bend height 170mm, min arc radius 2mm - Min forming inner size customizable; Reducer backlash: 3 arcmin

Condition: good (used), Year of construction: 2005, machine/vehicle number: AA1/014879, functionality: fully functional, input voltage: 400 V, input current: 106 A, input frequency: 50 Hz, type of input current: three-phase, We offer this very good SCM RECORD 110 AL machining center, year of construction – 2005. Serial number: AA1/014879 Machine number: 2966282040H Reference: 052635 Supply voltage: 400 V Number of phases: 3 Kdodezua Tdspfx Adqor Operating current: 106 A Short-circuit current rating: 10 kA Frequency: 50 Hz TECHNICAL DETAILS Processing type: Drilling, milling Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel passage: 200 mm Number of working fields: 2 Table type: Flat table Table configuration: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: top Controlled axes: 5 Spindle cooling: liquid cooling Grooving unit Number of grooving units: 1 Installation position: top Design: fixed grooving unit Grooving direction: X-direction If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2019, machine/vehicle number: 28, functionality: fully functional, operating hours: 3,964 h, input voltage: 380 V, type of input current: three-phase, number of slots in tool magazine: 21, total height: 2,500 mm, total length: 8,000 mm, total width: 4,000 mm, table length: 3,600 mm, table width: 800 mm, Machine offered on behalf of a customer – request the brochure with images & videos and the seller’s contact information. THIBAUT Edge processing center T658, manufactured in 2019, #029 • Toothed / drive belt new, to be replaced in 08/2026 • Grinding, polishing, and satin finishing of: Kdedpfxozu Tlto Adqjr - Straight edges up to 40 cm high - Profiled edges - Curved edges with rollers • Automatic tool changer with ISO 40 mount and pneumatic clamping force • Tool magazine with 21 slots • Operation via touchscreen • Automatic detection of workpiece position and thickness for a maximum of 5 workpieces • Table dimensions 3.60 x 0.80 m with consoles for rotary and lifting table for aligning the workpieces, table with new rubber coating • 4 rows of all-round rollers, height-adjustable • 6 pneumatic cylinders for clamping the workpieces • 4 clamping holders for locking the workpieces • Space requirement approx. 8.0 x 4.0 x 2.5 m • Tools / accessories - 5 planetary grinding heads AR3 with ISO 40 - 8 ISO 40 mounts for rollers 200 mm - 16 ISO 40 mounts for grinding media 100 & 130 mm - 1 ISO 40 mount with disc 300 mm Pricing: • EXW from the machine location, plus VAT, subject to prior sale, no tools included, attachments, accessories shown in the pictures are not included in the machine/scope of supply. Payment terms: • 50% down payment upon order confirmation, 50% payment upon notification of readiness for shipment Warranty: • Machine as is, excluding any warranty claims Inspection possibility: • At the operating site near Kaiserslautern Availability: • Short-term / immediately after consultation

Year of construction: 2012, condition: like new (used), functionality: fully functional, machine/vehicle number: 1012331637, Precision Vee-cuts in aluminium and PVC profiles Pneumatic continuously adjustable saw blade feed for fast and precise sawing with rapid return Simple setting of cutting depth Equipped with connection for swarf extraction hose and swarf container as standard Equipped with pulsed coolant system Cutting range for Vee-cuts: cutting depth 60 mm, profile height 100 mm Saw blade diameter 254 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output per motor 0.9 kW Kdsdpszrcfqofx Adqjr Compressed air supply 7 bar Air consumption per working cycle 20 l without spraying, 44 l with spraying Length 980 mm, depth 800 mm, height 1,650 mm, weight 240 kg

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 1500050182, Elumatec SBZ 150 Profile Machining Centre with 5 Axes for Aluminium Profiles, 7.3m Due to a production changeover to a tube laser system, we are selling our fully functional Elumatec SBZ 150. The machine was serviced by Elumatec in March 2026 and has not been used since then. Interested parties are always welcome. We would be happy to demonstrate and let you test the machine at our facility. Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel range A-axis: 0-90°, freely programmable - Swivel range C-axis: 0-355°, freely programmable - Max. machining length without end processing: 7300mm - Max. machining length with end processing: 6980mm - Tool changer with 10 positions, plus a saw blade holder - 8 material clamps - Tool holder: HSK63 - Spindle power: 15kW / 22,000 rpm - 2-layer processing - Minimum quantity lubrication Kdjdpfx Adoy Dvq Hjqjr - Central lubrication - Saw blade: 400mm The machine is available immediately. Required space, see layout in the attachment. Transport instructions are also included in the attachment. If you have any questions, please contact us. Disassembly, loading, and transport should preferably be organised by the buyer due to reassembly requirements. Various aids can be provided by arrangement, as far as available. All information and dimensions have been described to the best of our knowledge, but we cannot guarantee completeness or accuracy! The sale is made as seen, without warranty, return or similar. Subject to prior sale.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4000x2900x2100 mm Weight 2500 kg Total power requirement 24 kw Kodpfx Ajv A E Uaedqjdr

Condition: excellent (used), Year of construction: 2016, operating hours: 25,187 h, functionality: fully functional, The Mazak 3D Fabri Gear 400 II is a 6-axis 3D laser cutting machine designed for cutting tubes and profiles, specifically engineered for processing large-diameter materials and structural shapes. The 2016 model is typically equipped with a 4.0 kW Panasonic CO2 laser resonator and specialized 3D heads for complex cross-sections. Key technical parameters (2016 model): Kdjdpfx Adszg U Tpjqjr Laser type: 4.0 kW (4000 W) CO2 resonator Maximum material length: 12,000 mm (12 m) Maximum tube diameter: approx. 406 mm (16") Maximum square profile: 254 mm x 254 mm (10" x 10") Axes and movement: 6-axis control (X, Y, Z, A, B, C) Control unit: Mazak FX Maximum workpiece weight: approx. 480 kg Functions and capabilities: Material types: Carbon steel, stainless steel, and structural profiles (I-beams, channels, angles). 3D head: Rotatable 3D laser head with a touch sensor (probe) and an auto-focus system. Automation: Weld seam detection and automatic material measurement. Optional equipment: Threading unit (enables cutting and threading in a single cycle) V-TYPE FEEDER Machine operating hours: 25,187 hours. Link to machine video:

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x2900x2100 mm Weight 2900 kg Kodpfx Asv A E Utodqjdr Total power requirement 24 kw