Used Ebu Eccentric Press - Single Column for sale (22,928)

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories Pgedpfx Asfx Hv Hsc Aet

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s Psdpsxna Uzofx Ac Asgt operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm Psdpfxsvc Ax Ne Ac Asgt throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 28800 € 550.08 € 20 to 1.7 mm 360 mm 550 mm 140 mm 1 - 50 mm 160 1/min 4 40 mm 35 mm 200 mm 240 mm 2.2 kW 1360 mm 1100 mm 1860 mm 1250 kg Welded steel frame construction 4-fold ram guide Pneumatic clutch-brake combination Protective enclosure with light barriers and side doors Pedpfxswiry Uj Ac Aogt Mechanical overload protection Two-hand and foot pedal operation Manual stroke adjustment Manual ram adjustment Variable stroke rate via frequency converter Operating modes: * Adjustment mode * Two-hand release * Foot release * 2-stroke operation via light barriers * Continuous operation Touchscreen for * Stroke counter with preselection for continuous operation * Stroke rate adjustment * Lubrication intervals and duration * Alarm messages * Motor direction of rotation * Monitoring of inputs and outputs 2 free cams for connecting peripherals Automatic central lubrication Equipment in accordance with CE regulations OPTION: Vibration pads € 132,--

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 97800 € 1848.42 € 160 to 1100 mm 700 mm 210 mm 23 - 110 mm 60 1/min 630x400 mm 8 95 mm 65 mm 325 mm 480 mm 2400 mm 1430 mm 3200 mm Pjdpoynnbwjfx Ac Aegt 9950 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH

Condition: used, pressure 63 t throat - mm stroke 16 - 125 mm table-size 800 x 600 mm force 250 cutting surface 1600 mm² table adjustment range 220 mm total power requirement 6 kW weight of the machine ca. 5 t distance table/ram 562 mm press is to be dismantled and partially overhauled: - dismantling and checking - new colors - new control cabinet with ABB safety control and touch screen Psdoch Umcspfx Ac Aegt - current UVV test with brake time measurement and press test book - COnversion to safe operation

Condition: used, pressure 150 t Table dimensions 1000 x 630 mm Podoyqv Ahspfx Ac Aogt voltage 400 V Inclineable mechanical press with updated electrics (CE2004) and bolster plates. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0550296, Offer 26149 Technical data: - Pressing force: 125 t - Stroke: 340 mm - Table size (approx.): 1000 x 680 mm - Through-hole in table (approx.): 300 x 200 mm - Maximum installation height (approx.): 500 mm - Plunger surface (approx.): 600 x 300 mm - Dowel hole in plunger: 50 mm - Plunger adjustability: 75 mm - Stroke adjustment: 20 - 180 mm - Stroke rate: 80 1/min - Light curtain - Hydraulic clutch - Pneumatic damper - Two-hand operation - Central lubrication - Separate control cabinet with operating units - Pneumatic connection: 6 bar - Drive: 400 V / 16.5 kW - Space requirement (approx.): W 1700 x H 2900 x D 2700 mm Pgedpfoy Tvdxjx Ac Aet - Weight (approx.): 9400 kg

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm Pgsdou Nfv Uopfx Ac Ajt total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. *

Condition: used, Year of construction: 1972, pressure 40 t throat 220 mm stroke 8-88 mm Psdpfxjztfz Rs Ac Ajgt stroke - stepless adjustable 30-140 mm ram adjustment 63 mm weight of the machine ca. 2600 t

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm Pjdpfju Nfwlox Ac Aogt distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: used, Year of construction: 1990, pressure 35 t Pgsdeztf Anspfx Ac Aet no. of strokes ca 72 Hub/min dayligth 195 mm total power requirement 1,5 kW weight of the machine ca. 330-400 kg

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available Pgodpfezvnfdsx Ac Ast

Condition: used, pressure 35 t throat 220 mm stroke 10 - 120 mm no. of strokes 120 Hub/min ram adjustment 50 mm table surface area 590 x 440 mm ram surface 460 x 160 mm total power requirement 2,2 kW weight of the machine ca. 2,5 t dimensions of the machine ca. B 0,88 x T 1,2 x H 1,95 m Features - Hydraulic clutch - Adjustable table - Base frame, height 28 cm The following work is performed in-house: - Complete disassembly of the press, cleaning, and technical inspection - Shaft removal, crack inspection, new seals, and V-belts - New paint finish: Light Gray RAL 7035 / Gentian Blue RAL 5010 - BEKA lubrication unit + new lubrication lines Pgsdpfxoykb Dqe Ac Aet - New front cover - New control cabinet with ABB safety control system and touchscreen Operated via touchscreen mounted on the front of the control cabinet, Positioning of the control cabinet (cable length) to be determined in consultation with the end customer, standard 0.8–1.0 m next to the machine, including new cabling for the press - Foot switch - Two-hand control - Current UVV inspection with braking time measurement Following the modernization, the machine is approved for manual loading operations on the open die.

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Press force: 25 tons Throat depth: 200 mm Table size: 520 x 400 mm Ram area: 155 x 155 mm Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Pjdpjtx E N Tefx Ac Asgt Table height adjustment: approx. 150 mm Ram strokes: 160 strokes/min Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL - UVV according to VBG 7n 5.1 for manual loading - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Condition: used, Year of construction: 1989, pressure 150 t throat 310 mm stroke 30-120 mm no. of strokes 20-60 Hub/min ram - range of adjustment 90 mm table surface area 820x600 mm ram surface 550x430 mm Pgedpoxh Sw Usfx Ac Ast hole in the table 330x200 mm table height 750 mm tool hole in ram Ø50 mm weight of the machine ca. 9,5 t dimensions of the machine ca. BxTxH 2500x2500x3000 mm

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m Podpfxou Nfp Ie Ac Aegt further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Two-hand operation and/or control panel *

Year of construction: 2023, condition: new, pressure 20 t throat 155 mm Pjdpfx Aep Ududec Ajgt stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: used, Year of construction: 1966, pressure 040 t throat 240 mm stroke 8- 88 mm number of strokes - idle run 130 /min Pgodpfxsy Nd Svs Ac Ajt shut height (stroke down, adjustm. up) 320 mm ram adjustment 63 mm table surface area 560 x 435 mm ram surface 250 x 200 mm hole in the table 150 mm table height over floor 950 mm total power requirement 4 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m

Condition: used, pressure 150 t Table dimensions 1000 x 360 mm Podpfeyuqdhox Ac Asgt voltage 400 V

Condition: used, Technical details: pressure: 63 t throat: 315 mm ram adjustment: 60 mm adjustment of stroke: 70 mm ram stroke: 10 - 105 mm no. of strokes: 71 - 140 Hub/min strokes per minute: Einzelhub: 45 / 50 Hub/min. passage between the side columns: 355 mm dayligth: 335 mm table:: BxT: 800 x 630 mm passage opening in table: 400 x 130 mm clamping plate: BxT: 616 x 85 mm clamping surface ram: BxT: 450 x 280 mm mortise hole in ram: Ø 50 x 83mm mm total power requirement: 7,5 kW weight of the machine ca.: 5,9 t dimensions electric cabinet LxWxH: 0,86 x 0,30 x 1.3 m dimension machine xH: Presse: 1,42 x 1,8 x 2,6 m Press with roll feed/strip system and straightener Pgsdjvt Nvpepfx Ac Aet High-performance press with roll feed/strip system and straightening machine Application: suitable for series production Equipped with servo roll feed MINI: refurbished until 01/2021 -manufacturer P/A GmbH, type SRF 220 -for strip width 220mm -feed rate 150m/min. -operation with hand tool straightening system: -manufacturer Wanzke, type KS 150 -insertion width max. 200mm -2 pieces driven inserting rolls -4 pieces driven straightening rolls (top), adjustable vertical approx. 30mm -5 pieces driven straightening rolls (bottom), fixed, not adjustable Coil = special design: -mechanical/manual -external take-up max. Ø 1.500mm -internal take-up max. Ø 300mm -width max. 200mm Roller deposit: -roller system with 9 pieces of roller bars with 53 rollers (Ø 25x25mm). *

Condition: used, Year of construction: 2004, pressure 25 t throat 375 mm stroke 80 mm no. of strokes 120 Hub/min ram adjustment 45 mm total power requirement 3,5 kW weight of the machine ca. 2,8 t Pgsdpfx Aeykb D Dec Ast

Condition: used, Year of construction: 1953, machine/vehicle number: 66/53, pressure:36 t throat:280 mm stroke:6 - 82 mm ram adjustment:51 - 13 mm no. of strokes:6-82 Hub/min table surface area:530 x 480 mm Hole in clamping plate:Ø 140 mm clamping plate thickness:70 mm ram surface:200 x 200 mm clamping plate:530 x 450 mm dimensions of the machine ca.:1,0 x 1,65 x 1,80 m Podpjcxxwcefx Ac Ajgt flywheel machine with DITTMER type PSK 103/B built in 1978, additional clamping plate 530 x 450 mm (thickness 70 mm), manual central lubrication, height-adjustable table (+/- 180 mm)

Condition: used, Year of construction: 1977, pressure 080 t throat 280 mm stroke 8 - 112 mm no. of strokes 30 - 120 /min distance table/ram, max. stroke up, adjustment up 500 mm table surface area 840 x 580 mm hole in the table 150 mm table height over floor 910 mm passage to the back 640 mm ram surface 560 x 300 mm ram adjustment 80 mm power requirement 7,5 kW weight 8,0 t Pedozrpppjpfx Ac Aegt dimensions (WxDxH) 1,6 x 2,3 x 3,3 m with infinitely variable drive, pneumatic clutch, hydraulic overload protection in ram, motoric ram adjustment, inclineable, two-hand operation

Year of construction: 1990, condition: used, pressure 75 t throat 300 mm stroke 8 - 110 mm table surface area 750 x 600 mm ram adjustment 75 mm ram surface 430 x 230 mm hole in the table 250 x 150 mm tool hole in ram 40 mm no. of strokes 60 + 90 Hub/min weight of the machine ca. 4,4 t total power requirement 4,5 - 6,8 kW dimensions of the machine ca. 1,95 x 1,1 x 2,35 m distance table/ram Hub unten, Stöß. unten 19 mm distance table/ram Hub oben, Stöß. oben 380 mm Pgsdpfx Aod Nl E Ujc Ast Furnishing: - with hydraulic clutch-brake combination, with new hydraulics and oil cooler - with gear transmission in oil bath - fixed table prepared for the attachment of tool changing consoles - 2 roller bars in the table - mechanical overload in the ram The following work is carried out on the machine / partial overhaul: - Machine is completely disassembled, checked, seals changed, defective parts exchanged etc - Machine is repainted - new Balluff cam control - new hydraulic unit with oil cooler for the clutch - new Vogel central lubrication - new control cabinet with touch panel and ABB safety control - Current UVV test with braking time measurement