Used Cronosstech Chcp 40 for sale (21,791)

Year of construction: 2002, condition: ready for operation (used), A repair-required Safan CNC press brake is available. Working width: 2050mm, press force: 400kN, ram stroke: 180mm, installation height: 450mm, closing speed: 90mm/s, working speed: 20mm/s, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2500mm, weight: approx. 5000kg. The tool clamping system of the machine is defective. Documentation available. An on-site inspection is possible. Tjdpfx Acsyz Anae Teb

Condition: used, Year of construction: 2014, operating hours: 4,848 h, Liebherr Engine D934 A7 – 140 kW (EPA) Weight: 43 tons Undercarriage EW - Width: 3,800 mm - Track gauge: 4,500 mm - Track pads, triple grouser, 600 mm, D6C, 56 links - Two-piece track guide Tjdpfx Aoyffm Ssc Teb Industrial monoblock boom, straight, Z1, 9.10 m Industrial stick, tip slightly angled, 7.50 m Hoist cylinder damping Active lowering of hoist cylinder Rod protection for piston rods, energy recovery cylinder Auto-lift Engine automatic shutdown Travel alarm, acoustic, non-deactivatable Proportional control (left): medium pressure circuit Joystick hand rest (raised) Roof window wiper Hydraulic cab elevation LHC 255 (from 3.24 m continuously adjustable up to 5.25 m) Narrow platform for LHC 255 Comfort radio Comfort driver's seat Cab floor window with armored glass Rear area surveillance with camera Work lights cabin front, 2 units, LED 1300 lumens Work lights cabin rear, 2 units, LED 1300 lumens Rotating warning beacon on cab, 1 unit Bypass filter, Liebherr

Condition: used, Year of construction: 1998, Surface grinding machine Manufacturer: Geibel + Hotz Type: FS 40 AC Year of manufacture: 1998 Table length: 400 mm Tedpswcym Asfx Ac Tsb Table width: 200 mm Maximum workpiece weight on the table: 150 kg Grinding wheel diameter: 225 mm Grinding wheel width: 25 mm Grinding wheel bore: 51 mm Machine weight approx.: 1,050 kg Machine dimensions L x W x H: 1,800 x 1,200 x 2,250 mm 3826

Condition: new, maximum load weight: 43,929 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 16,690 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low-Loader Extendable with Wheel Wells (NEW) ---- Equipment & Highlights Technology & Construction - Extendable low-loader trailer with wheel wells - Overall length: 13,190 mm; platform: 9,240 mm + 3,500 mm extension - Platform height only 875 mm for a low loading height - Total width: 2,550 mm + 600 mm extension - Unladen weight approx. 14,071 kg - Perm. total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles - 4 BPW axles: front 2 rigid, rear 2 self-steering axles - Lift axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) Tedpfx Asx Ix Rqec Tob - 16x tires 245/70 R17.5 (M+S + 3PMSF) - Tire pressure monitoring system per R141 Ramps & Loading Area - Foldable 40-ton ramps - Ramp length 2,750 mm, width 850 mm - Hydraulic sliding system - 45 mm hardwood floor + steel chequer plate over wheel arches - Wheel wells and bridging plates included - Excavator arm recess at the rear Load Securing - Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN at the gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on the platform - 8,000–10,000 daN at the outer frame / wheel well area - 5×2 stake pockets, detachable stakes 50×100 mm - Container locks for 1×20 ft or 1×30 ft Equipment & Comfort - 1× toolbox (700×400×360 mm) - Stake box - Beacon light - LED side marker lights, LED work lights - Wheel chocks - Width indicator panels with LED - Standard 2" kingpin - Metallised chassis (Zn/Al 85/15) – high corrosion protection - Colour: Red ---- Special Features - New & immediately available - High payload, extremely versatile - Perfect for machinery transport, construction equipment, vehicles, etc. - Very robust design, high-quality BPW components We are happy to provide further information on request.

Condition: used, Year of construction: 1996, machine/vehicle number: xxxx, Lg.no. 24265 Technical data: - Shaft holder 35 mm - Shaft groove length 90 mm - Drive speed 1450 rpm - Drive 400 V / 4.4 kW - Space requirement approx. W 1300 x H 2500 x D 800 mm Todpfetx Ubrox Ac Tsb - Weight approx. 200 kg

Condition: used, TECHNICAL DETAILS - honing diameter : 1 - 12 [mm] - honing length : 40 [mm] Tjdpsug U Dtsfx Ac Tjb - 2 honing heads - 1 control head - 1 deburring unit with multispindle head

Condition: used, TECHNICAL DETAILS - max diameter : 40 [mm] - max bar length : 3800 [mm] - supply tension : 3x 230 [V] - = control tension : 24 [V=] - ~ control tension : 110 [V~] - supply frequency : 60 [Hz] - dimensions : 4.300 x 750 [mm] Tsdpfx Acjuhbg Ro Tjb - height : 1.860 [mm] EQUIPMENT - canal diameter : 14 [mm] - pushcart diameter : 12 [mm] - feet

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Tedpfx Ajxwlthjc Tsb Total power consumption: 47 hp Machine weight: 160,000 kg The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Equippment: 1 Grip feeder system right hand side 1 Eccentricpress 90 kN Todpfox Tuzcjx Ac Tob 4 Standard slide units 1 Narrow slide units 1 control shaft Working range: wire diameter range: 0,5 - 4,0 mm strip metal width: up to 60 mm feeding length: up to 270 mm output: up to 350/min

Condition: good (used), Year of construction: 1997, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 415 x 350 mm turning speeds 160 - 2.250 U/min column diameter 115 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1920 mm Features: - Heavy-duty column drill press - Continuously variable speed control (V-belt) - Pole-changing motor Tsdpfx Aozl E T Rec Teb - Fixed drilling depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - User manual (PDF)

Condition: excellent (used), Year of construction: 2024, Stäubli TS2-40 SCARA Industrial Robot Manufacturer: Stäubli Faverges SCA Type: TS2-40 Robot Year of Manufacture: 05/2024 Machine Type: 4-Axis SCARA Industrial Robot Controller: Stäubli CS9 For sale is a used Stäubli TS2-40 SCARA industrial robot with CS9 controller and SP2 handheld device. This compact robot system is designed for fast and precise pick-and-place, assembly, handling, and automation tasks. The system is suitable for various applications, including electronics manufacturing, machine loading, packaging technology, laboratory automation, quality assurance, and general industrial applications. Technical data: Manufacturer: Stäubli Faverges SCA Model: TS2-40 Robot type: SCARA robot Number of axes: 4 Robot year of manufacture: 05/2024 Reach: 460 mm Rated payload: 2.4 kg Maximum payload: 8.4 kg Z-axis stroke: 200 mm Repeatability XY: ±0.01 mm Repeatability Z: ±0.004 mm Repeatability Rz: ±0.002° Mounting type: Floor mounting Performance data: Maximum speed axis 1: 550°/s Maximum speed axis 2: 720°/s Maximum speed axis 3: 2,500 mm/s Maximum speed axis 4: 2,500°/s Cycles per minute: up to 240 Power consumption according to VDMA 24608: approx. 0.397 kW Controller: Manufacturer: Stäubli Type: CS9-TS2-40 Controller: CS9 Controller year of manufacture: 04/2024 Controller version: Rackable Power supply: 1 × 230 V AC / 50–60 Hz Connected power: 1,700 VA Communication: Ethernet / PROFINET Device Software: VAL 3 activated Handheld device: Manufacturer: Stäubli Model: SP2 Touchscreen color display Integrated emergency stop switch Operation and programming of the robot system Power supply: 24 V DC / 0.5 A Equipment: Stäubli TS2-40 SCARA robot Tedpjzlhvuefx Ac Teb Stäubli CS9 robot controller Stäubli SP2 handheld device Robot and connection cables Pneumatic and electrical connections in the robot arm Ethernet interface PROFINET interface VAL-3 programming system Gripper mounting according to images RoboticsControls software / DVD Technical documentation Dimensions: Maximum reach: 460 mm Z-axis stroke: 200 mm Dimensions CS9 controller (H × W × D): approx. 270 × 445 × 365 mm Condition: Used Year of manufacture 2024. Optical condition according to images. Scope of delivery: Stäubli TS2-40 SCARA industrial robot Stäubli CS9 controller Stäubli SP2 handheld device Robot cable and connection cables RoboticsControls software / DVD Technical documentation Accessories according to images Scope of delivery as shown in the pictures. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Subject to changes, errors and prior sale.

Condition: used, mileage: 1,181,481 km, power: 220 kW (299.12 HP), first registration: 01/2008, fuel type: diesel, number of seats: 50, gearing type: automatic, next inspection (TÜV): 12/2026, emission class: euro5, color: white, Year of construction: 2008, Equipment: ABS, air conditioning, parking heater,

Condition: used, Year of construction: 2012, fuel type: gas, Lifting capacity: 3.000 kg Todpezfnbwsfx Ac Teb Please contact Gebrauchtgeräte Center for more information

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge on the left, one-hand operation, lockable. Insert shelf: stainless steel, support surface 970 x 980 + 500 mm Load per shelf max. 35 kg Total load with max. shelf configuration 100 kg Test chamber lighting: 3x halogen lamp 20 W, 12 V Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text RS 232 interface free switching channels for on-site test specimen control Temperature range: -40°C to +180°C Rated voltage: 400V 3/N 50Hz Rated power: 10.4 kW Rated current: 17.2 A Compressor: TFH2516Z Pipe connection NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without radiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, Width 975, Depth 2200 mm External dimensions: Height 1950, Width 1290, Depth 3145 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain, unpressurized, R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1m from the front) < 55 dB(A) Weight: approx. 1200 kg For your safety as a buyer, here is the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone. Todpszg Twasfx Ac Teb

Condition: ready for operation (used), Trepko XPG 40 butter packing machine - Suitable for 100 gram and 250 gram butter blocks - Capacity: up to 80 packages per minute Todpfxozibufe Ac Tsb Suitable for butter, margarine, lard, and cottage cheese Packaging in parchment paper or aluminum foil.

Condition: excellent (used), Year of construction: 2014, power: 5.5 kW (7.48 HP), pressing force: 40 t, table width: 100 mm, table length: 2,100 mm, throat depth: 300 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Todpozgfv Ujfx Ac Teb Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, TECHNICAL DETAILS - Bar diameter : 45 [mm] Tjdpfx Aszbncbec Teb - Bar length : 3800 [mm] - Max. scrap length : 150 [mm] - Loading time : 22 [sec] POWER SUPPLY - Supply voltage : 400 [V]

Condition: excellent (used), Binder Temperature Test Chamber Type: MK240-400V Manufacturer: Binder For sale is a Binder MK 240 temperature test chamber designed for professional heat and cold testing in industrial settings, research, development, and quality assurance. The temperature test chambers from Binder’s MK series are particularly suited for cyclic temperature tests and reproducible testing under defined environmental conditions. This test chamber enables temperature testing within a range from -40 °C to +180 °C, providing an efficient alternative to custom-built solutions. Technical specifications: Temperature range: -40 °C to +180 °C Test chamber volume: approx. 228 liters Temperature performance data: Spatial temperature deviation: 0.1 to 1.2 ± K Temporal temperature deviation: 0.1 to 0.5 ± K Heating rate: approx. 5.0 K/min Cooling rate: approx. 4.5 K/min Cooling time from +180 °C to -40 °C: approx. 110 minutes Test chamber: Internal dimensions: approx. 735 x 700 x 443 mm (W x H x D) Tsdjy Nicmspfx Ac Tsb Dimensions: External dimensions: approx. 1115 x 1710 x 925 mm (W x H x D) Load capacity: Max. load per shelf: approx. 30 kg Max. total load: approx. 70 kg Features: 2 x access ports Ø 70 mm 1 door 2 standard shelves / up to a maximum of 6 shelves possible Electrical data: Rated voltage: 400 V Line frequency: 50 Hz Rated power: approx. 4.0 kW Circuit protection: 16 A Phases: 3~ Weight: Approx. 320 kg Condition: Used Scope of delivery: As shown in images Viewing by appointment possible. Loading can be arranged. Sale without warranty. (Specifications and technical details subject to change and error.)

Condition: used, mileage: 1,032,966 km, power: 220 kW (299.12 HP), first registration: 12/2008, fuel type: diesel, number of seats: 50, gearing type: automatic, next inspection (TÜV): 03/2027, emission class: euro5, color: white, Year of construction: 2008, Equipment: ABS, air conditioning, parking heater,

Year of construction: 1977, condition: used, machine/vehicle number: IntNr231519, A used Jung HF 40 surface grinding machine, manufactured in 1977, is offered for sale. This is a robust, heavy-duty model. Technical data: Type: Hydraulic Table size: 400 x 150 mm Grinding length: 400 mm Tsdpfozqdlisx Ac Tob Grinding width: 150 mm Grinding wheel diameter: 200 mm Grinding wheel width: 16 mm Spindle speed: approx. 2,800 rpm Table speed: infinitely variable from 2 to 20 m/min Automatic vertical feed: 0.002–0.013 mm Machine weight: approx. 900 kg Machine dimensions: approx. 1,300 x 1,200 x 1,500 mm The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in the technical data and information.

Condition: new, FESTO Tedpfszm Ipqsx Ac Tjb Multi-position cylinder ADNM-40-A-P-A-60Z1-108Z2-162Z3

Condition: excellent (used), Catalogue number: 7853 TECHNICAL DATA Tedpszum Disfx Ac Teb - Max. diameter of main saw blade without scorer: 400mm - Max. diameter of main saw blade with scorer: 350mm - Main blade adjustment (height/tilt): electric - Arbor diameter: 30mm - Arbor lock - Sliding table included - Side carriage + angle stop included - Sliding table length: 3000mm - Cutting width at rip fence: 1350mm - Side carriage included - Scoring unit included - Max. scorer blade diameter: 120mm - Scoring motor power: 0.75kW - Main motor power: 6kW - Motor for height adjustment: 0.25kW - Motor for tilt adjustment: 0.25kW - Three spindle speeds: 3500/4500/6000 rpm - Table dimensions: 1220x650mm - Table extension: 1920x1450mm - Large blade guard - Extraction port diameters: 80mm, 125mm - Machine dimensions (LxWxH): 3500x3460x1500mm - Weight: 1000kg ADVANTAGES – Manufactured in Poland – Equipped with scoring unit – DTR documentation + CE certificate – Used saw, in very good condition Net price: 23,900 PLN Net price: 5,690 EUR (according to 4.2 EUR exchange rate) (Prices may change with significant currency fluctuations)

Year of construction: 2017, condition: ready for operation (used), A WMU projection brazing furnace, originally built in 1997, but completely refurbished and overhauled in 2017, is available. Heated length: 3750mm, max. operating temperature: 1150°C, heating zones: 4, heating elements: CRFeAl grade, heating capacity: 94kW, usable width: 400mm, usable height: 200mm, throughput: approx. 200kg/h, speed min./max.: 100mm/400mm/min, overall system dimensions X/Y/Z: approx. 19600mm/1900mm/3000mm, control system: PLC. Including an additional muffle, heating elements, conveyor belt and cooling segments. Documentation available. An on-site inspection is possible. Tjdpjzidkvofx Ac Tob

Condition: ready for operation (used), Max. Working temperature: 1120°, heated length: 1000mm, cooling length: 1850mm, channel height: 40mm, conveyor belt width: 110mm, throughput speed: 100-1000mm/min, splitting gas consumption: 1.5-2.5Nm³/h, touch panel: Siemens SIMATIC HMI, length: 5000mm, width: 650mm, height: 1350mm, with integrated ammonia splitter GSP 25 FA, integrated gassing panel, protective gas from ammonia splitter (on-site ammonia supply) + N2 purge gas as required, MSR system with Siemens PLC and touch HMI, atmosphere monitoring, process documentation, on-site inspection is possible. Todpfeq Ttz Eox Ac Tsb

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Tedpfxen Tpmuo Ac Tjb