Used Creemers Rcb D15 Ivr for sale (207)

Year of construction: 2001, condition: ready for operation (used), A KFT bar feeder is offered. Bar diameter: approx. 15mm, Bar length range: approx. 150mm/1215mm, Magazine width: approx. 600mm, Material change time: approx. 18-25s, Alignment accuracy: +/-0.5mm. Machine dimensions: approx. 1500mm/1200mm/1400mm, Weight: approx. 250kg. Inspection possible by appointment. Ppjdjzka N Rjpfx Amksw

Condition: used, functionality: fully functional, Year of construction: 2016, load capacity: 3,000 kg, Four-way side loader Condition: Ready for use and fully functional Podpfx Aju Acuzemkjpw Technical condition: good Description: Little-used spreader for Combilift CB2500 and CB3000, two units available – one for the 135 cm and one for the 175 cm fork carrier.

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Pedpfx Aszkivtsmkspw Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Pallet stackers or dispensers are used for automatically stacking and destacking of empty pallets to a complete pile. Those empty pallets can be loaded by any pallet truck or forklift. (similar to green palomat) Type PD15 In very good condition Capacity: 15 europallets Psdpog Du Epjfx Amkjpw Dimension pallet : 1200 *800 mm Dimension machine : 1.600x1.370x2.170 mm Control: electrical on 220V (single phase) no need for compressed air

Condition: ready for operation (used), Year of construction: 2012, L & Z Spindle Lathe ZMM - CU 630 RD incl. Digital Display -CE marking -Digital display -Year of manufacture 2012 -Center height 315mm -Turning diameter over guides 630mm -Turning diameter over cross slide 430mm -Distance between centers 1500mm -Turning diameter with bridge removed 830mm -Spindle bore 103mm -Automatic longitudinal / facing feeds -Motorized rapid traverse in the carriage -Speed range 16 - 1250 RPM (stepless speed control) -Drive power 11Kw -Three-jaw chuck / ROTAX 315 incl. hard & soft jaws -Chuck guard -Tailstock -Steady rest -Multifix base with inserts -Coolant system Ppjdszhx Hvopfx Amkew -Work light Dimensions: L x W x H 3.5 x 1.5 x 1.7 meters / Weight 4000Kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2020, YEAR 2020 MODEL: TD 150 MAXIMUM CAPACITY: 1.50 mm (400 N/mm²) WORKING LENGTHS: 6.4 m Pjdpfxszcm Dmo Amkspw DEPTH OF NOTCH: 1250 mm WIDTH OF BENDING BLADE: 10 mm + additional guide 10 mm MAXIMUM BENDING ANGLE: 143° BENDING ACCURACY: ± 0.5°

Condition: like new (used), Year of construction: 2020, Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Width of bending jaws: 10 mm + 10 mm additional bar Maximum bending capacity: S = 20 mm, 1.50 mm steel sheet (Re 275 N/mm²) Capacity for 180° bending: 50% of the maximum bending capacity Maximum bending angle: 143° (1.0 mm 135° / 1.5 mm 130°) Pjdozcyr Djpfx Amkjpw Bending accuracy: +/- 0.5° (using crowning) Number of clamps / clamp stroke: 7 units / 15 mm - 1250 mm Maximum clamp opening: 35 mm Conical backgauge with adjustable depth: multi-zone function Number of backgauge fingers / stroke: 7 units / 5 mm - 1150 mm Backgauge tolerance range: +/- 0.1 mm per repeatability set Electrical voltage: 400 V / 50 Hz / 3 phases + PE Rated current / protection / pump: 32 A / 63 A / 22 kW, 75 ccm Dimensions / weight: 8050 x 2250 x 2100 mm / approx. 10,000 kg

Condition: used, mileage: 600,000 km, power: 290 kW (394.29 HP), first registration: 01/2015, fuel type: diesel, overall weight: 26,000 kg, emission class: euro6, loading space length: 7,600 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, Equipment: ABS, air conditioning, navigation system, Antos 2540 First registration: km 3rd axle, steerable + liftable PAYLOAD 15320 kg Wheelbase 4900 Side rail profile on the left with an overhang, allowing the sliding tarpaulin to be fully opened Platform interior: 7.6 m ... height 270 cm Trailer coupling Pedpfxex A Rvxo Amkjpw Air suspension Air conditioning Reinforced engine brake M5V Camera: distance, lane, brake assist German vehicle TÜV (technical inspection) can be renewed upon request Tel: Please visit our website: ----We will be happy to assist you with financing or leasing EU sales: net price upon presentation of company documents and VAT number VAT deposit: 2000 € we speak English we speak Serbian-Croatian Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station Tel:

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1500 kg Ppedpfoyz Iu Ssx Amkow Length: 8960 mm Width: 2720 mm Height: 2400 mm Machine weight: 5900 kg Electrical connected load: 62 kW

Condition: new, Year of construction: 2026, Laser power: 12000 Watt Working range laser: 3048 x 1524 x 280 mm simultanious: 150 m / min Max. positioning accuracy X,Y axis: 0,05 mm Max. steel: 30 mm Max. stainless steel: 25 mm Max. aluminium: 25 mm Max. brass: 20 mm Max. copper: 10 mm Max. workpiece weight: 1000 kg Length: 8960 mm Width: 2720 mm Height: 2400 mm Ppsdpfx Amezcum Nekjw Machine weight: 5900 kg Electrical connected load: 36 kW

Condition: good (used), machine/vehicle number: 1591, Year of construction: 2005, load capacity: 15,000 kg, lifting height: 8,150 mm, mast type: telescopic, total length: 6,740 mm, total width: 3,685 mm, operation weight: 48,600 kg, Kalmar RTD1523 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Ppodpfoyuhg Tex Amkow Wheel size – Drive wheel: 33.25x33 Wheel size – Steering wheel: 18.00x25

Condition: used, Year of construction: 2005, Name: Sludge dewatering centrifuge used Pedpfx Amsy Edfbekepw Manufacturer: Huber Type: RoD 1500 Year built: 2005 Driving force: 18,5 kW Throughput m³/h: 12 m3/h Permissible sediment density: 1,2 kg/dm³ Max. bowl speed: 4000 rpm Inner diameter drum: 365 mm Material: Stainless steel Dimensions: L 2800 x W 1000 x H 1100 mm Empty weight: 3000 kg Technical doc.: Yes Message: Immediate availability, Worm drive: Viscotherm Rododiff 10715, Hydraulics B/C 7.5 -16 Z HP Accessories: Control cabinet and a hydraulic system Condition: Second hand Price: On demand

Condition: used, ---- Fixed installation Bolt: 80/70 Shaft: 320 Psdpfxjzkz Saj Amkepw Axle: 400 with torque motor

Condition: used, mileage: 14,189 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 06/2024, emission class: euro6, color: silver, number of seats: 2, Year of construction: 2023, total length: 5,981 mm, total width: 2,059 mm, total height: 2,533 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Errors and prior sale reserved! Internal number: 1110. RB62849 ----EQUIPMENT * LED exterior light mounted high, downlight at the rear * Paintwork: metallic finish * Technology Package 13 – Heated windscreen – Windscreen wipers with rain sensor – Park Pilot System front/rear with additional side sensors, active emergency brake assist (radar-based) – Lane assist with driver fatigue warning – High-beam assist – Lane keeping/change assist – Headlight assist with day/night sensor – Blind spot assist – Adaptive cruise control – Reversing camera – LED downlight – Fog lights – Exterior mirrors electrically adjustable/folding/heated – Automatic climate control – Ford audio system with 12" multifunction display and Ford SYNC4 * Seating Package 12 – Driver's seat, 4-way adjustable (forwards/backwards, backrest, seat cushion tilt, height) – Single passenger seat, 2-way adjustable (forwards/backwards, backrest) – Height-adjustable headrests – Driver's inside armrest – Manual lumbar support (driver's seat) – Trend seat upholstery: fabric * Auxiliary heater Package 1 – Auxiliary heater (fuel-operated additional heater), programmable, including remote control – Includes cold start package (-29 degrees) * Thermal insulation glazing, medium tint side windows from B-pillar * Anti-lock braking system (ABS) with electronic brakeforce distribution (EBD) – Electronic safety and stability program (ESP) with traction control (TCS) – Hill start assist – Side wind assist – Emergency brake assist – Rollover protection – Emergency brake support including emergency brake light – additionally with trailer stability control only in conjunction with tow hitch (at extra cost) * Axle load upgrade – front axle increased to 1850 kg * Driver and front passenger airbags Pedpfew Si Sfex Amkopw * Battery: programmable battery runtime set to 10 min * Rubber flooring (in driver's cab and passenger compartment) * On-board computer with consumption and mileage data (e.g., remaining range) plus outside temperature display and Ford ECOMode * Third brake light * Medium roof * Full headliner * Rear double-wing doors with 180° opening angle (with window) – heated rear windows, rear window wiper incl. washer nozzle and automatic activation when reverse gear is engaged * Rev counter * Electronic safety and stability program (ESP) with traction control (TSC) – hill start assist – side wind assist – emergency brake assist – rollover protection – emergency brake support including emergency brake light – additionally with trailer stability control only in conjunction with tow hitch (at extra cost) * Passenger compartment lighting with delay function * Lane assist – lane assist and driver fatigue warning incl. high-beam assist * Lane assist additionally with lane keeping assist * Windows, 2nd row: fixed side window, right * Electric front windows – with quick down/up function for driver’s side * Ford Easy Fuel – convenient fuel cap and misfuelling prevention * Heated windscreen * High-output alternator * Cruise control * 6-speed automatic transmission * Glove compartment, lockable lid * Interior lighting with delay function and front reading lights * 70 l fuel tank * Steering wheel: synthetic leather * Steering column adjustable for height and reach * MyKey key system – individually programmable spare key * Fog lamps * Active emergency brake assist (camera-based) * Emergency call assistant * Park Pilot System front and rear * Particulate filter:

Condition: used, Falch 3 phase high pressure cleaner 500 bar pressure @ 15lpm only done about 360 hours and works perfectly. Sold with trigger but no hose used for cleaning boat hulls stone work excavator tracks and any cleaning where very high pressure is required Ppodpfjxc Numsx Amkjw

Condition: used, fuel tank capacity: 65 l, lifting height: 1,710 mm, Year of construction: 2019, operating hours: 1,670 h, Field of application: Mining Empty weight: 1.510 kg Carrying capacity: 1.500 kg GVW: 3.010 kg Ppsdpjzb Nabjfx Amkjw Dimensions (LxBxH): 318 x 148 x 261 cm

Condition: used, Year of construction: 2019, operating hours: 1,880 h, Year of manufacture: 2019 Pedpfx Asx U U Hzemkepw Field of application: Mining Empty weight: 1.510 kg Carrying capacity: 1.500 kg GVW: 3.010 kg Dimensions (LxBxH): 314 x 145 x 265 cm

Condition: used, Year of construction: 2015, functionality: fully functional, measuring range X-axis: 530 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 300 mm, warranty duration: 12 months, UK DELIVERY ONLY OPTIV Reference 2z543 Dual Z axis system Pneumatic active damping 10x CNC Zoom HP-S-X1C Analogue Scanning Probe Standard Styli Kit 3 port tip changer rack PC-DMIS Measurement Software Year of Manufacture 2015 2nd user machine, sold as seen. Measuring Range: Psdpfx Asu Rq Skemkopw Vision Sensor: X 530mm, Y 400mm, Z 300mm Tactile Sensor: X 530mm, Y 400mm, Z 300mm Mutual Measurement Range: X 530mm, Y 400mm, Z 300mm Length measurement error - Vision Sensor Ex, Ey = (0.5 + L/600) μm Exy = (0.8 + L/600) μm Length measurement error - Tactile Sensor MPEE (x), MPEE (y) = (0.5 + L/300) µm MPEE (xy) = (0.8 + L/300) µm MPEE = (1.3 + L/300) µm

Condition: new, Year of construction: 2026, load capacity: 15,000 kg, Column-type turning device with 15-ton load capacity, available as a set or individually. 2 sides are driven. Machine is offered as a synchronized set or individually. Protec turning device / positioner Syncrolift. Double-column design, wireless and manual hand remote control. Column adjustment: both columns electrically movable. Load capacity: 15,000 kg, 360° rotation. Podpfow Nilaox Amkjpw Torque: 21,000 Nm. Minimum working height: 800 mm. Maximum working height: 1,700 mm. Rotation speed: 0.5 rpm. Clamping plate diameter: 1,000 mm. Rotational drive: 2 x 2.2 kW motors. The price refers to one unit with electric trolley included. The second unit as part of a set is 20% cheaper. Optional with articulated flange (cardan flange) upon request.

Condition: like new (used), Year of construction: 2000, Welding positioner, Heinrichsglück, 15-ton capacity Condition: like new Complete with accessories: handheld remote control, foot pedal, manual, documentation, electrical diagrams – everything is included Dimensions: Diameter of the clamping plate: 2200 mm Height when tilted (to center): 1450 mm Height in horizontal position: 1800 mm Speed: 0.025 to 1.1 RPM Tilting range: 0 to 135° Length: 3400 mm Width: 1800 mm plus 300 mm Ppjdpfx Ajhcbmpjmkjw Weight: 8000 kg

Condition: used, Year of construction: 1994, operating hours: 8,972 h, 1994 | Dresser TD 15 E Without Ripper | Used Tracked Dozer | 8972 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 21600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert Ppjdpfx Amox Rhbwsksw 64 inspection points 53 approved ✅ 8 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the bulldozer. Both lift cylinders have leaks and shocks on the rods. Absence of a left diagonal reinforcement bar from the front blade frame – the bar has been repaired by welding. Slight spray of oil and smoke when opening the oil tank cap. No visibility on the hydraulic oil level. The left rear window has been replaced with plexiglass and the front windshield as well as the side windows are cracked. No retention of the door in the open position. Absence of the diesel tank cap. The engine is stopped by pulling a cable. The parking brake control has been replaced by a bolt. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40009 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2003, condition: like new (used), machine/vehicle number: D150P511007, 2003, stainless single shot depositor, rise and fall head, 25L depositor, mobile frame, Ppodpfsdwhfgsx Amkjw

Condition: used, mileage: 399,970 km, power: 120 kW (163.15 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 3,645 kg, maximum load weight: 955 kg, overall weight: 4,600 kg, axle configuration: 4x2, wheelbase: 3,650 mm, brakes: other, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 5, loading space length: 3,650 mm, loading space width: 2,000 mm, loading space height: 1,970 mm, Equipment: ABS, air conditioning, cabin, central locking, fog lights, parking heater, power assisted steering, sliding door, soot filter, * German vehicle * Stollenwerk stretcher available at an additional cost * Intensive care ambulance box body * Bodywork by WAS Ambulance * Adjustable floating stretcher table Stryker Model 6381 * 3 attendant seats * Air conditioning in passenger compartment * Electric heater * Pull-out cabinet * Warming cabinet * Medical cabinets * Oxygen and suction system pre-installed * 220 Volt power sockets * Ampoule compartment * External storage compartment * Right-hand sliding door with electric step * Rear wing doors with step * Driver’s cab with 2 seats * Air conditioning * Auxiliary heater * Driver and passenger airbags * Height-adjustable driver and passenger seats with armrest * Electric windows * Electrically adjustable and heated mirrors * Automatic transmission * Partition wall with sliding window * Daytime running lights * Radio CD * Central locking with remote control * ABS and ASR * Twin rear wheels * Signal system * Work lights * Body dimensions: L=3,650 x W=2,000 x H=1,970 mm * Wheelbase: 3,650 mm * GVW: 4,600 kg * Payload: 955 kg * For sales to traders and for export (both EU and non-EU), German commercial law applies. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV certification, without new SP, and without new UVV. You can find more trucks on our homepage at Ppjdpfxjvhpqvo Amkow We speak the following languages: German, English, Polish, Turkish Notice: We strongly recommend and offer a viewing and inspection of the goods to avoid any misconceptions regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and specification of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, TH6D-150-CFAC-AB, Scansonic Optical Seam Guide Ppsdoquqqmepfx Amkjw Model: TH6D-150-CFAC-AB Condition: Used

Condition: new, functionality: fully functional, machine/vehicle number: CPD15TVLNEU, Year of construction: 2025, load capacity: 1,500 kg, lifting height: 4,500 mm, free lift: 1,430 mm, mast type: triplex, construction height: 2,140 mm, power: 10 kW (13.60 HP), fork carriage width: 1,040 mm, fork length: 920 mm, empty load weight: 2,950 kg, total length: 2,733 mm, drive type: Lithium-Ionen, construction width: 1,100 mm, Electric 3-wheel forklift Chassis number: CPD15TVLNEU Load center: 500 mm Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Pedpfjy Uppdsx Amkopw Condition: New device Technical condition: New Front tyres type: Solid rubber Front tyres condition: New Rear tyres type: Solid rubber Rear tyres condition: New Battery voltage: 80V Battery capacity: 150Ah Battery type: Lithium-ion Battery year: 2025 Battery condition: New Sideshift, 3rd valve, 4th valve, rear working light, front working light, roof cover,