Used Cazeneuve Teach-In Lathe for sale (19,224)

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: Fully operational and lightly used belt dryer from New eco-tec. Optionally available with air scrubber and 180m³ silo for dried goods. The plant was in operation until recently and is ready for immediate use. The system spans 2 containers and has a belt length of 24m, rated for 1.5MW thermal output. The belt dryer is entirely made of stainless steel inside the containers. Viewing by appointment. Dcsdpsyr Aiqofx Am Rjh

Condition: used, Year of construction: 2001, TECHNOLOGICAL LINE FOR MANUFACTURING ROOFING ELEMENTS 1. Profiling machine 2. Insulation element production system 3. AL foil preparation system 4. Gluing system 5. Auxiliary components, technical documentation, certificates Dcodpfeyv E Aiox Am Rsh Types of roofing panels produced on the technological line: - Roofing panels with modular dimensions 1100 mm x 1070 mm - Roofing panels with half-module dimensions 550 x 1070 mm - Roofing panels without anti-condensation layer in various lengths (up to 6 m)

Condition: excellent (used), Auxiliary heater Buderus 2500 kW. Oil + gas. Housed in 20-foot sea container. Dsdpfx Amox U Eyfe Rsch

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Dcedpfxowzzzfj Am Rjh Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Condition: new, pressure: 60motor: 11daylight: 450stroke lenght (max.): 400table diamension: 600 x 500 x 80tappet area: 600 x 500 x 90table height: 850messurements (LxWxH): 1.300 x 2.000 x 2.700weight approx.: 4.000oil filling: 200 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 150mm. Auxiliary cylinder: 2 pcs. Ø 60 x 40mm. Auxiliary guide: 2 pcs. Ø 40mm. Motor: 7,5kw. - 11hp. ( IE-3 ) Pump: 18cc. - 26Liter / ASC. Speed : flow 110mm./sec. - return 120mm./sec. - Pressure : 11mm - 5./sec. Installation height: 500mm. Dsdpfx Amsmmuq Io Roch Stroke length: 400mm. Table top: 600 x 500 x 80mm. - (with T - grooves) Plunger plate: 600 x 500 x 90mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 7 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: new, pressure: 125motor: 22daylight: 500stroke lenght (max.): 400table diamension: 800 x 600 x 120tappet area: 800 x 600 x 300table height: 850messurements (LxWxH): 1.600 x 2.000 x 3.200weight approx.: 7.000oil filling: 400 Control / Key switch:         1. setup mode Manual without light sensor(max. 10mm. /sec. speed). 2. automatic (full speed) with light sensor Main cylinder: Ø 220mm. Auxiliary cylinder: 2 pcs. Ø 70 x 40mm. Auxiliary guide: 2 pcs. Ø 50mm. Motor: 15kw. - 22hp. ( IE-3 ) Pump: 48Liter / ASC. Speed : flow 120mm./sec. - return 140mm./sec. - Pressure : 13mm - 5mm/sec. Dcsdpfx Amemr Hpco Reh Installation height: 500mm. Stroke length: 400mm. Table top: 800 x 600 x 120mm. - (with T - grooves) Plunger plate: 800 x 600 x 300mm. - (with T - grooves) Table height: 850mm. (Floor to table top upper edge) ----- Accessories Hydraulics:           Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC.  (10 - 60 tons) Speed adjustable via PLC. Air cooler Pre-fill valve Accessories control: Siemens S7-1200 Main control box   Swivel control panel Safety PLC. - SICK Light sensors SICK 700 + 150mm. Linear scale for adjusting the stroke length 9 PLC screen - Siemens (German & English) Movable two-hand control Ethernet connection for remote maintenance Alarm annunciator for malfunctions (candlestick & sound) 2-fold workspace lighting 8 free ON & OFF buttons on the PLC. for external connections The press complies with the machine directives Hydraulic proportional valves Dual channel cable protection Instruction manual & parts list (German + English) With side safety door (doors can be moved backwards)

Condition: good (used), Zip Wire closed spiral in spools 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Sold only in whole. Dcjdpfxowunmbs Am Rsh

Condition: excellent (used), Year of construction: 2022, Detailed specs in the pictures and below. Description: 1.Equipped with full color touch screen monitor, main machine, transfer and conveyor can control the speed automatically and synchronization trace parameter setting system. 2. The machine adopt movable and adjustable operating function in each section .Equipped with elaborate tooth lever design. It is simple, convenient and efficient for one man operation. Dcodpfx Asnlag Ijm Rjh 3. High power stepless speed control frequency conversion and high-efficiency power motor, the highest speed can reach 400 meters/min, power transmission adopts powerful belt transmission, with low noise, high efficiency, easy maintenance and economic efficiency. 4. Each functional components of the machine adopt modular design, which is convenient to assemble, convenient to replace and debug products, convenient for beginners to master technology, and easy to learn. 5. Unique design of the upper and lower glue tank and coordinate with the need of products. 6. Compression and conveyor section equipped with adjustable the pressure design according to the needs of the products. Equipped with a set of special soft belts to ensure uniform pressure and perfect quality. 7. The machine adopt photoelectric counting, which can be used for total or quantitative counting, and equipped with kicker mark recognition device.

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Djdpfx Aoyr Awbsm Roch Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: excellent (used), Model: 4M/65E Dodpfx Ajxz Tfasm Rjch Condition: Very good Dimensions: 80.00 (H) x 60.00 (W) x 120.00 (L) inches Additional Description: - Automatic copy lathe - To make spades, shovels, curling's, gun holders, axes, legs, cricket bats and so on. - Makes 4 pieces at the same time. - Router (no sanding attachment) - Speed regulation on slide. - Works great

Condition: as good as new (ex-display), functionality: fully functional, Surface grinder. New condition Taiwanese machine. The machine run a few hours, just it was tested. Standard accessories: Grinding wheel Wheel flange Flange extractor Wheel balancing arbor Wheel balancing base Wheel dresser with diamond Leveling screw & plates Tool box & tools Manual Optional accessories: 3 HP Spindle motor (siemen brand) instead of 2 HP Longitudinal by sensor & solenoid valve Electro magnetic chuck, 150 x 450 mm (Fine pole) Coolant system (Capacity 52L, 1/8 HP) Dcsdpfx Aem Tv U Tem Rjh Auto crossing stroke adjustment Crisscross grinding Power rapid up/down system (AC motor, 1/5 HP) Wheel flange (extra) Back water splash shield Led lamp instead of halogen lamp Spindle motor inverter 3 HP (Taiwan made) Digital readout (lu, cross: 300 mm + vertical: 450 mm; 2 axes monitor) Auto. demagnetizer for chuck 5A If you are interested, please contact me! More machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinder, head and block resurfacer, valve seat milling, pressure tester, parts washer machines

Condition: used, Year of construction: 2023, HXCP HX360 Hardcover Casing-In Machine (2023 Model) Note this machine new is over $70,000 USD. Asking for $39,000 or best offer for quick sale. Buyer responsible of removal and shipping. Link to YouTube video is included in the listing. Available for sale is a 2023 HXCP HX360 automatic hardcover notebook/book casing-in machine. The machine was purchased new in 2023 and has been used in our hardcover book production operation. It is designed for automatic casing-in of hardcover books, journals, notebooks, and similar products. We are selling this machine because our production requirements have grown and we are upgrading to a larger, higher-capacity binding line that better fits our current workflow. The machine is currently located in New Jersey * HXCP HX360 * Year: 2023 * Automatic hardcover casing-in machine * Suitable for hardcover books, notebooks, and The machine is being sold as-is, where-is, with Dodpfx Aezbykqem Rech Please contact us for additional photos, videos, specifications, and pricing.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, operating hours: 100,000 h, input voltage: 4,000 V, type of input current: three-phase, total length: 65,000 mm, overall weight: 40,000 kg, controller model: partially manual, Equipment: chip conveyor, corrugation cardboard line, C,B,E flute 1530mm units,the bobbin feet of the machine 4/3single 1 double ,glue transfer unit, heating tunel, side cutting and cut off unit, Included the gaz and air stations, glue preparing unit. all are parts of the production line. Dcedpjwycrcofx Am Reh

Condition: like new (used), DN Solutions PUMA DNT2600L 2024 Model – Only 32 Cutting Hours (Like New Condition) Chuck: 12 inch Dsdpjy D E Risfx Am Rech Max Turning Diameter: 460 mm Max Turning Length: 1078 mm Spindle Bore: 81 mm Spindle Speed: 3,500 rpm Main Motor Power: 26 kW Max Torque: 735 Nm X-Axis Travel: 260 mm Z-Axis Travel: 1100 mm Rapid Traverse: X 24 m/min – Z 30 m/min Turret: 12 Stations Guideway System: Box Guideway Machine Weight: 4,900 kg Condition: 2024 model, only 32 cutting hours, almost in brand-new condition.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Dcjdpfx Amjxdmgvs Rsh Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, turning diameter: 220 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 240 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 580 mm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €342,000! Due to inquiries, the auction has been extended by 2 weeks. TECHNICAL DETAILS Max. bore / max. passage: 220 mm Max. turning diameter: 220 mm Distance spindle nose – tailstock center: 614 mm Center distance: 800 mm Travel X1 and X2: 167.5 mm Travel X3: mm Travel Z1 and Z2: 515 mm Travel Z3: 580 mm Travel Y: +45 / -45 mm Rapid traverse X: 30 m/min Rapid traverse Z: 30 m/min Rapid traverse Y: 20 m/min Axis acceleration: 9.8 m/s² Main spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Dcedpfx Amey Ukhhj Rjh Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Spindle power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Spindle torque max. / S3 25% / S1: 205 / 180 / 150 Nm Counter spindle / Sub spindle Max. speed: 4,000 rpm Outer diameter front bearing: 170 mm Inner diameter front bearing: 110 mm Spindle nose: ASA 6" A2 Spindle inner diameter: 72.5 mm Draw tube bore: 66 mm Chuck diameter: 210 mm Chuck bore: 66 mm Power max. / S3 25% / S1: 35.5 / 28.3 / 23.5 kW Torque max. / S3 25% / S1: 205 / 180 / 150 Nm Tailstock / Counter support Morse taper: CM3 Tailstock travel: 580 mm Max. force: 500 kgf Turret / Tool holder Number of stations: 24 Tool cross-section: 20×20 / 25×25 mm Tool change time: 0.1 s Clamping force at 45 bar: 3,200 kgf Driven tools Number of rotary stations: 12 Max. speed: 12,000 rpm Power max. / S1: 14 / 10 kW Max. torque max. / S1: 42 / 32 Nm Liquids / Tanks / Supply Coolant tank, side: 510 l Coolant tank, rear: 330 l Hydraulic oil tank: 18 l Lubricating oil tank: 4 l Installed power: 87 kVA Operating voltage: 400 V, 50 Hz ±5% Optional voltage according to table: [230 V, 50 Hz ±5%] Max. ambient temperature: 35 °C MACHINE DETAILS Control model: FANUC 31iPLUS Dimensions & Weight Dimensions (L x W x H): 2,860 × 2,377 × 2,289 mm Total weight: 11,000 kg Internal volume: 1.7 m³ EQUIPMENT Coolant supply through left spindle Hainbuch AXZUG 65 collet chuck (standard) 2702/0008 for left spindle SMW-Autoblok BBD 175 3-jaw chuck 56 with a set of soft jaws for right spindle Measuring arm Hinged band chip conveyor with side discharge Upper turret station (T1) double high-pressure pump (6+15 bar, 55 l/min) Inner turret station (12) double high-pressure pump (6+15 bar, 55 l/min) Machine status light Automatic part unloader Part unloader with pneumatic opening and closing function for catching ejected parts Pneumatic part ejector for counter spindle with 100 mm stroke, stroke adjustment and end position sensor Unimag interface for bar feeder

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 162881, turning diameter over cross slide: 410 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 80 mm, rotational speed (max.): 3,800 rpm, TECHNICAL DETAILS Swinging diameter over bed: 530 mm Swinging diameter over carriage/slide: 410 mm Distance between centers: 1,000.00 mm Maximum turning diameter: 340 mm Maximum machining length: 1,000 mm Travel X-axis: 260 mm Travel Z-axis: 1,016 mm Travel X-axis (B-axis): 139 mm Travel Z-axis (B-axis): 965 mm C-axis: 360° Control: Okuma OSP-P200LA Spindle speed: 38–3,800 rpm Speed ranges: stepless, automatic range selection Spindle nose: Option A2-8 Big Bore Spindle bore: 80 mm Main drive motor: 22.37 kW Torque: 412.17 Nm Upper multitasking turret: V-12 NC turret Lower turret: V8 (VDI) Indexing time without lifting: 0.18 s Speed of driven tools: 45 – 4,500 rpm Motor for driven tools: 7.08 kW Feeds X/Z: 333.16 / 416.56 mm/s Feed C: 3.333 rpm Tailstock spindle diameter: 90 mm Tailstock taper: MK #5 Tailstock travel: 120 mm MACHINE DETAILS Machine weight: 8,800 kg Supply voltage: 220/480 V Phases: 3-phase Frequency: 60 Hz Rated apparent power: 31 kVA Dedpey U T Dlofx Am Rech Full load current: 81.7/37.5 A Largest motor rated current: 96 A Short-circuit rated values: 30/10 kA

Condition: ready for operation (used), Year of construction: 2002, operating hours: 53,548 h, functionality: fully functional, machine/vehicle number: 01160014061, turning length: 630 mm, turning diameter: 420 mm, vice opening: 66 mm, control type: CNC control, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Dodpfjza D Rfex Am Roch TECHNICAL DETAILS Working area Turning diameter: max. 420 mm Turning length: max. 630 mm Spindle bore: 66 mm Turret Tool head: 12 tools, Sauter VDI30 CNC control: 4290 Heidenhain MACHINE DETAILS Electrical data Voltage: 400 V Auxiliary voltage: 230 V / 24 V Frequency: 50 Hz Current: 80 A Connected power: 44 kVA EQUIPMENT C-axis with driven tools Machine chip conveyor Documentation 2 driven tool holders External reference: 598

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,744 h, functionality: fully functional, machine/vehicle number: 6100000012E, turning length: 393 mm, turning diameter: 228 mm, spindle speed (max.): 3,000 rpm, vice opening: 51 mm, Equipment: chip conveyor, No minimum price – guaranteed sale to the highest bidder! Lathe equipped with a tailstock and chip conveyor! TECHNICAL DETAILS Working range Dcsdjza D Iwopfx Am Rjh Turning diameter: 228 mm Turning length: 393 mm Distance between centers: 51 mm Spindle speed: max. 3,000 rpm Turret Turret head: Sauter VDI30 MACHINE DETAILS Electrical connection data Voltage: 400 V Frequency: 50/60 Hz Weight: 3,500 kg Operating hours Power-on hours: 20694 Working hours: 5744 EQUIPMENT Chip conveyor with coolant tank and pumps 3 driven tool holders WTO 4 standard holders VDI30 Tool probe Chuck: Kitagawa 210 mm Tailstock Machine manuals External reference: 603

Condition: used, turning diameter over bed slide: 1,000 mm, turning length: 6,500 mm, Swift Heavy Duty Long Bed Lathe Swing Over Bed: 1000mm Distance Between Centres: 6500mm Spindle Speeds: 7.5 – 450 RPM Machine With: 800mm 4 Jaw Chuck Fixed Roller Steady 400mm Dia Travelling Steady Rapid Traverse To Saddle Dedpfszbx A Sox Am Rsch Digital Readout

Condition: excellent (used), Year of construction: 2008, turning diameter over cross slide: 530 mm, turning length: 2,500 mm, turning diameter: 900 mm, spindle bore: 280 mm, spindle speed (max.): 1,120 rpm, spindle speed (min.): 1 rpm, turning diameter over top slide: 530 mm, chuck outer diameter: 600 mm, Weiler CNC Hollow Spindle Lathe Model: E-90 Control: Siemens Dsdpfxjzbhc Io Am Rsch Year: 2008 Swing Over Bed: 900mm Swing Over Top Slide: 530mm Distance Between Centres: 2500mm Spindle Bore: 280mm Spindle Speeds: 1-1120 RPM Machine With: 4 Way Auto Indexing Tool Post 600mm Front 3 Jaw Power Chuck 600mm Rear 4 Jaw Manual Chuck 2 Fixed Steadies Various Tooling

Condition: used, HERBERT 9C-30 TURRET LATHE MAKE HERBERT, MADE IN ENGLAND MODEL 9C - 30 MAX DIAMETER OVER BED 762.0 mm CHUCK TYPE 4 JAW CHUCK SIZE 630.0 mm MAX DIAMETER OVER CROSS SLIDE 535.0 mm MAX DIAMETER IN FRONT OF CROSS SLIDE 737.0 mm LENGTH BETWEEN CHUCK FACE -TURRET FACE 1505.0 mm TRAVEL OF TURRET 1066.0 mm DIAMETER OF HOLE THROUGH SPINDLE 125.0 mm SPINDLE SPEED 7 – 600 RPM PLUS OPERATOR SAFETY DOOR Dcodpfx Amey H Hc Ee Rsh GOOD RANGE OF ACCESSORIES

Condition: good (used), Year of construction: 2000, functionality: fully functional, Ge Fanuc control Dedpfx Aezakk Eom Rjch 3 jaw 10 inch Pratt and Barnet manual chuck 10HP spindle Quick change tool post Tailstock Coolant tank and tray 6 tool holders

Condition: used, Year of construction: 1990, functionality: fully functional, Fanuc OT control 3 jaw Kitagawa chuck 620mm swing 1000mm between centres 10 station turret Djdszakgtepfx Am Roch Tailstock Coolant pump and tank Swarf conveyor

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 12020, Fanuc 21i TB control 3 jaw SMW chuck 720mm swing 2000mm between centres 8 station turret Coolant pump and tank Dcodpfx Amszaix Ij Roh Swarf conveyor