Used Ishita Ag3-30 Notstromgenerator 30Kva for sale (24,862)

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, color: white, gearing type: automatic, number of seats: 30, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Vehicle in stock. Now with a modified body and 200 mm increased length for more legroom. School bus/transfer bus built on a Sprinter 907 chassis, model 519. A vehicle that may not win any design awards, but is 100% functional. It features a pleasant interior design and optimal use of space. Body made of fiberglass and sheet metal. Frame made of galvanized steel. Permissible total weight up to 6650 kg. Unladen weight 4350 kg Length 7800 mm Width 2280 mm Chassis with the following equipment: Dsdpfjz Ii D Aox Adhjcn - Front air conditioning - Hot water auxiliary heater - Suspension seat with heating - Electric exterior mirrors - Radio with hands-free system - Multifunction steering wheel (adjustable in height and inclination) - Cruise control - Euro 6E engine - Automatic transmission, 519 engine, - MBUX multimedia system, 10 inches - LED and fog lights - Rear and front cameras - Panoramic windows, tinted, single-pane - 2 plus 2 seating arrangement - = 29 seats - + Tour guide seat --> Total seats including driver: 31 - Emergency exit door - Roof hatch/emergency exit hatch - Electric exterior swing door with recessed entrance at the front - Driver's door, original MB - Convector heater in the passenger compartment on the left and right (thermostatically controlled) - Climate control, Webasto - RIGA 12 kW plus front air conditioning MB 7 kW = Dual climate control Rear trunk - Luggage racks on the left and right GSR 3 systems Optional: Price: Chassis 519, 129,990.00 Euro

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor right GKF 30°-750-550 IR900 RA1402 Dcjdpjk Aa Ukjfx Adhjn The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, type KT36 Year of construction: 2001 Optionally available: Supports Side guide one and both sides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 2001, Transnorm belt curve conveyor left GKF 30°-750-550 IR900 RA1404 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Djdpfx Aek Aa Unsdhscn Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 759 mm Frame width (NB): 750 mm belt width (GuB): 550 mm height (BH): 210 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Support feet optionally available Conveying speed (v m/s): 0,03-1,05m/s Drive: SEW gear motor SA37 DT80K4/MM05/BW1 Electrical data: 50Hz V380-500, kW 0.11 / 0.55 / S1 Belt: double layer, green, smooth, KT36 Year of construction: 2001 Optionally available: Supports Side guides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: as good as new (ex-display), Year of construction: 2016, Transnorm infeed diverter diverter inclined infeed inclined outfeed 30°-2005-1930-1000 RA1863 Exhibit Make: Transnorm Year of manufacture: 2016 Discharge angle: 30° Length: 1750 mm inclined inlet and 1130 mm with total width, total length 2880 mm and a middle length of 2005 mm Belt width (RB): 1000 mm Frame height: 150 mm Nominal/outer width (NB): 1150 mm Currently set height: 560 mm Conveying speed: with frequency converter freely adjustable V 380-500 kW 0.4-4 Overall height side wall: 200 mm Scope of delivery: motor with frequency converter, two supports, side guides, two light barriers and an emergency stop switch For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Djdpfjk Abifsx Adhjcn Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, Year of construction: 2021, Transnorm belt curve conveyor right 30°-1270-1100-IR900 RA2302 Technical data: Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 30° degrees middler conveying speed (v m/s): 1,4 m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 1,5 / S1 Belt: KT 96 new Year of construction: 2021 Dcodpfjt D R R Ejx Adhen Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2000, Punch press Manufacturer: EHT Type: Strippit 1500/30 Year of manufacture: 2000 CNC control: Fanuc Working area without repositioning: 2500 x 1500 mm Maximum material thickness: 8 mm Punching force: 30 tons Dcodoul S Eaopfx Adhjn Turret with 46 tool stations, including 4 indexing stations, size D 3 programmable clamps Metal table Used exclusively in single-shift operation Includes tools from WILSON TOOL 51026

Year of construction: 2013, condition: good (used), functionality: fully functional, machine/vehicle number: 00038-13, For sale is a professional parts cleaning system from the renowned manufacturer Krumm-tec, model RK 30. The cabin enables safe, clean, and ergonomic work during component cleaning and workpiece post-processing. Areas of application & uses: Additive manufacturing (3D printing): Efficient removal of resin and powder residues as well as support structures (SLA, SLS, Polyjet). Conventional mechanical engineering: Degreasing, cleaning, and dust removal of metal and plastic components. Suitable for the use of cleaning media such as water, cleaners, or solvents (e.g., IPA), depending on the model. Features & advantages: Closed, ergonomic housing with a large viewing window and integrated work gloves. Workpiece support made of robust grating. Integrated lighting and extraction/filtration system for safe operation inside the cabin. Clean media separation and easy maintenance. Technical data: Manufacturer: Krumm-tec Model: RK 30 Working area (W x D x H): approx. 680 x 350 x 598 mm Max. load capacity: approx. 40 kg Djdoz H H T Sjpfx Adhecn Design: Compact table/cabin system

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 426P, table width: 490 mm, table length: 1,150 mm, table load: 900 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 19,000 W, spindle nose: BT 40, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, CNC Heidenhain TNC 426P WORKING AREA: Longitudinal X: 1020 mm Transverse Y: 510 mm Vertical Z: 500 mm Rapid traverse rate for X, Y axes: 40 m/min Rapid traverse rate for Z axis: 25 m/min SPINDLE: Spindle power: 19 kW Maximum rotation speed: 10,000 rpm Spindle taper: BT 40 Dcedpfxez Iadys Adhsn TABLE: Surface area: 1150 x 490 mm T-slots: 5 slots at 100 mm intervals Maximum load capacity: 900 kg TOOL CHANGER: Magazine positions: 30 Tool change time: 3.5 sec Maximum tool weight: 6 kg Maximum length: 250 mm Maximum diameter: 80 mm Machine complete with: • Chip conveyor • Operating manuals and CE declaration Year of manufacture: 1997

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 1,360 h, machine/vehicle number: Z30N11-12432, load capacity: 227 kg, lifting height: 889 mm, platform length: 117 mm, platform width: 76 mm, overall weight: 6,598 kg, empty load weight: 6,598 kg, transport length: 366 mm, transport width: 119 mm, construction height: 224 mm, next inspection (TÜV): 03/2027, fuel type: electric, color: yellow, Equipment: UVV, We are selling an electrically powered articulated boom lift, a Genie Z-30/20N RJ, from our own rental fleet. It was manufactured in 2011. The unit was in active use in our rental operations until recently and is fully functional. The Z-30/20N RJ is a narrow, compact aerial work platform for indoor and outdoor use on prepared surfaces. Its narrow design allows it to pass through standard doors and be used in confined spaces. Because the rotating turret does not extend beyond the chassis, the platform can also work close to walls and obstacles. The articulated boom extends over machinery, shelves, or pipelines to reach the work area (lateral reach: 6.25 m). The rotating jib (RJ = Rotating Jib) facilitates precise positioning of the platform basket. The electric drive operates quietly and with zero emissions, making the platform suitable for use in halls, production facilities, and public buildings. Dodpfx Adoz I Dmxehocn The machine shows the typical signs of wear and tear expected for its age and rental usage. Inspection and a test drive are possible by appointment at our location.

Condition: used, Year of construction: 1992, Overview This carbonator was manufactured in 1992 by Germany KHS. The KHS CX 30 is designed for the production of carbonated mineral water. The unit was upgraded by KHS in 2014 and has a capacity of up to 30,000 litres per hour. The machine was in production until March 2025, was dismantled in December 2025, and is currently stored in a warehouse in Bippen. The machine is available immediately. Technical data - Capacity: 30,000 litres/hour - Application: Carbonated mineral water - Configuration: Carbonator with pumps, tank, and accessories - CO₂ rate: max. 8 g/litre Dcsdpfx Ajzavp Hsdhen - Drive: Siemens S7 Scope of Delivery - Carbonator | KHS | CX 30 | 1992 (upgraded 2014) | Complete system - Pump system  - Tank | KHS  - Control system | Siemens | S7 

Condition: used, functionality: fully functional, machine/vehicle number: 516353H00902, Year of construction: 2017, operating hours: 4,655 h, load capacity: 3,000 kg, lifting height: 7,380 mm, free lift: 2,340 mm, fuel type: electric, mast type: triplex, construction height: 3,170 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,219 kg, total length: 2,310 mm, drive type: Elektro, construction width: 1,200 mm, Electric 4-wheel forklift Chassis number: 516353H00902 Load center: 500 Fork width: 100 mm Fork thickness: 43 mm Mast type: Triplex Djdpfx Aozw R Ansdhjcn Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid rubber Front tire size: 23x10-12 Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire size: 18x7-8 Rear tire condition: 40 - 60% Battery voltage: 80V Battery capacity: 620Ah Battery manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2017 Battery condition: 60 - 80% Description: In addition to this MAKE - MODEL, we have approximately 150 heavy-duty forklifts, container forklifts, reach stackers, forklifts, and terminal tractors in our Oldenburg warehouse. Visit our website - hinrichs-Forklifts. Leasing, lease-to-own, and financing are always possible for us at attractive conditions. We also gladly purchase your used equipment outright, even if you do not purchase a vehicle from us. Call me, Marco Levermann, and I will be happy to provide you with detailed information about this MAKE - MODEL. By the way: Our forklift workshop specializes in the repair and maintenance of large equipment starting from 8 tons. We also gladly offer consignment sales for your vehicle. Side shifter, 3rd valve.

Condition: used, functionality: fully functional, machine/vehicle number: 516353H00905, Year of construction: 2017, operating hours: 4,990 h, load capacity: 3,000 kg, lifting height: 7,370 mm, free lift: 2,430 mm, fuel type: electric, mast type: triplex, construction height: 3,150 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,216 kg, total length: 2,420 mm, drive type: Elektro, construction width: 1,200 mm, Electric 4-wheel forklift Chassis number: 516353H00905 Load center: 500 Fork width: 100 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid rubber Dedpfx Adezw R Htjhecn Front tire size: 250/60-12 Front tire condition: 20 - 40% Rear tire type: Solid rubber Rear tire size: 180/70-8 Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 620Ah Battery type: PzS Battery year of manufacture: 2023 Battery condition: 80 - 100% Description: The unit is sold in good, operational condition with the latest safety inspection certificate and without any defects. Side shift, 3rd valve, windshield, full cabin.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Djdpfszxyvyox Adhocn -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/90/H75 mm -Total weight: 4.5 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Dcodpfx Adjzxzg Tjhen -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/90/H75 mm -Total weight: 4.4 kg

Condition: used, Year of construction: 1996, Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor belt sections and components palletized - ready for immediate collection. Technical data - Manufacturer: KHS (Klöckner Holstein Seitz) - Model: Innopas P II SG 30-200 - Year of manufacture: 1996 - Machine type: tunnel pasteurizer - Capacity: approx. 24,000 - 25,000 bottles/hour (depending on bottle format) - Treatment area: 113.5 m² - Treatment zones: 8 (H1-H3, S, P, C1-C3 plus cooling tower zone), 3 recuperative - Max. pasteurization temperature: 75.0 °C (0.7 l) / 72.5 °C (0.33 l) - Inlet temperature: 15.0 °C; outlet temperature: approx. 32 - 38 °C depending on format Dcodpfxszwxu Sj Adhon - Total treatment time: approx. 48.6 min (0.7 l) / 77.1 min (0.33 l) - Pasteurization units: approx. 5 PE - Machine water content: approx. 14.4 m³ - Water consumption at nominal capacity: approx. 1.5 m³/h - Heat consumption at nominal capacity (0.7 l): approx. 3,672 MJ/h - Installed power: approx. 66.2 kW - Electrical connection: 400 V, 50 Hz - Dimensions (L x W x H): approx. 21,000 x 4,210 x 2,750 mm - Required entry opening: approx. 2.7 x 3.0 m - Net weight: approx. 27,500 kg - Noise level: ≤ 85 dB(A) according to ISO 3744 Equipment - Siemens SIMATIC S5 PLC (main control) - Pasteurization unit setting (temperature diagram) upgraded to Siemens S7 with touch panel - Danfoss frequency drives - Modular plastic conveyor belt with drainage openings, belt sections palletized - External pump assemblies and inspection windows - Electrical cabinets with main disconnect switch - Original KHS documentation (datasheets and drawings) Condition Used. The machine is completely dismantled and stored; belt sections, piping and components are palletized for transport. The machine can be visited on request. Availability Immediately. Location: Germany. Loading by the seller is possible.

Condition: used, Year of construction: 1995, turning diameter 510 mm turning length 1000 mm control MAZATROL T PLUS total power requirement 22-26 kW weight of the machine ca. 6,5 t Dcjdpfx Aszyvcrsdhon

Condition: used, Punching force: 300 kN Dimension(e) e.g. a 20 mm hole in 12 mm steel Dodexcndyepfx Adhecn Stroke triggering via foot switch Assortment of tools is included in the price Very good condition

Condition: used, Year of construction: 2018, operating hours: 8,563 h, functionality: fully functional, WEILER E 30 X 750 Cycle Turning Machine (2018) Manufacturer: WEILER Djdpfxjzy Sr Ns Adhscn Type: E 30 X 750 Cycle Turning Machine Year of manufacture: 2018 Condition: Used Operating hours: 8563 h

Condition: good (used), functionality: fully functional, Important note: The machine is currently still located at the customer's site – available at the beginning of 2027. Robust WEIMA ZM 30 twin-shaft shredder for shredding wood waste, offcuts, and similar materials. The machine features two slow-running shredding shafts and a generously sized feed hopper. Due to its low speed and robust design, the machine is well-suited for use in carpentry workshops, joineries, and wood processing companies. Technical data Manufacturer: WEIMA Maschinenbau GmbH Type: ZM 30 Year of manufacture: 10/2002 Machine no.: 900-789 Motor power: 2 × 11 kW Total motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Current consumption: 55 A Speed: 25 rpm Cutting width: approx. 460 mm Screen hole size: Ø 20 mm Hopper opening: approx. 600 × 1,240 mm Dimensions: approx. 1,490 × 1,290 × 1,970 mm Weight: approx. 1,300 kg Operating hours: approx. 4,188 hours according to the operating hour meter Dsdpfx Ajzxrxgsdhecn Equipment Twin-shaft cutting system 2 separate drive motors, each with 11 kW Large feed hopper Screen with Ø 20 mm holes Emergency stop Control cabinet / electrical control The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.

Condition: excellent (used), mileage: 422,117 km, power: 315 kW (428.28 HP), first registration: 01/2018, fuel type: diesel, tire size: 385/65/22.5, axle configuration: 8x4, wheelbase: 4,850 mm, fuel: diesel, fuel tank capacity: 470 l, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, total length: 8,800 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 13,000 kg, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, parking air conditioner, power mirror, soot filter, trailer coupling, = Additional Options and Accessories = - Aluminum fuel tank - Leaf suspension - Brake booster - Speed limiter - Air horn - Parabolic suspension - Particulate filter - Reversing camera - Sun visor - Toolbox - Power take-off (PTO) - Central lubrication - Towing jaw = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,677 cc Axle Configuration Front axle 1: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered Dcodpfx Aowhprrjdhon Front axle 2: Tire size: 385/65/22.5; Max. axle load: 9,000 kg; Steered Rear axle 1: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg Rear axle 2: Tire size: 315/80/22.5; Twin tires; Differential lock; Max. axle load: 13,000 kg Weights Unladen weight: 14,110 kg Payload: 29,890 kg Gross vehicle weight: 44,000 kg Functionality Body brand: VDL S-30-6600 Condition Technical condition: Very good Visual condition: Very good Identification License plate: 61-BKH-9 MERCEDES-BENZ AROCS 8X4 VDL S-30-6600 HOOKLIFT TIPPER EURO 6 430 HP 8X4 DRIVE WHEELBASE 485 CM FULL LEAF SUSPENSION DIFF LOCK AUTOMATIC WITH ENGINE BRAKE TRAILER COUPLING VDL S-30-6600 HOOKLIFT TIPPER HYDRAULIC CONTAINER LOCKING TOOLBOX FOLLOW US ON INSTAGRAM, FACEBOOK, AND TIKTOK TO SEE VIDEOS OF OUR FORKLIFTS AND MACHINES FOR SALE. WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL MÓWIMY PO POLSKU ГОВОРИМО УКРАЇНСЬКОЮ

Condition: excellent (used), For sale is a Weiler C30 x 750 DJ02 lathe from 2008 in very good, well-maintained condition. The machine comes from a training environment and has been used accordingly with care. It is in very good technical and optical condition and has its original paint. Technical data / Equipment: * Manufacturer: WEILER * Model: C30 x 750 DJ02 * Year of construction: 2008 * Type: Conventional lathe * Application: Training / Workshop * Very good, well-maintained condition * Original paint Accessories / Scope of delivery: * New collet quick-change system * 3-jaw chuck * Multifix B quick-change tool holder * Technical documentation Due to its very good condition, the machine is ideal for training companies, workshops, locksmiths, mechanical production, and general workshop use. Inspection possible by arrangement. WORK AREA Center height 165 mm Swinging diameter over bed 330 mm Swinging diameter over cross slide 160 mm Distance between centers 750 mm SPINDLE Spindle head DIN 55027/DIN ISO 702-3 Size 5 Spindle bore 43 mm Spindle diameter in the front bearing 70 mm MAIN DRIVE Drive power 60 %/100 % ED 9/7 kW Speed range 1 – 4,500 min-1 Number of speeds stepless FEED RANGE Number stepless Longitudinal 0.001 – 10 mm/rev Cross 0.001 – 10 mm/rev Feed force longitudinal 6,000 N Feed force cross 3,000 N Max. rapid traverse speed longitudinal/cross 6/3 m/min THREADING RANGE Metric threads 0.1 – 400 mm Inch threads 56 – 1/4 Gg./inch TAILSTOCK Arbor diameter 50 mm Dcjdpfx Adjz Aitpjhen Arbor stroke 110 mm Internal taper DIN 228 MK 3

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 03/2022, loading space length: 13,600 mm, loading space width: 2,550 mm, loading space height: 1,250 mm, suspension: air, tire size: 385/55 R22,5, Year of construction: 2022, = Additional Options and Equipment = - Alloy wheels - Air suspension - SAF axles - Warning lights - Toolbox = Notes = 1st and 2nd axle with Tridec turntable steering Toolbox Lashing rings Stake pockets Hardwood floor All-round warning lights Work lights Length: 1,360 cm Width: 255 cm Floor height: 125 cm Front wall height: 255 cm Center of king pin to rear: 1,200 cm = Further Information = General Information Model year: 2026 Registration number: OT-46-GD Axle Configuration Tire size: 385/55 R22.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 10,000 kg; Steerable; Tire tread left: 50%; Tire tread right: 50% Djdpfx Adezrl Hqohecn Rear axle 2: Max. axle load: 10,000 kg; Steerable; Tire tread left: 70%; Tire tread right: 70% Weights Unladen weight: 9,300 kg Payload: 28,700 kg Gross vehicle weight: 38,000 kg Maintenance APK (MOT/Technical Inspection): valid until 04.2027 Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: excellent (used), Year of construction: 2020, operating hours: 6,292 h, lifting height: 5,150 mm, fuel type: gas, mast type: duplex, power: 39 kW (53.03 HP), total height: 3,300 mm, total length: 2,850 mm, total width: 1,250 mm, color: other, Empty weight: 4.790 kg Lifting capacity: 3.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 4th Hydr. circuit - Beacon(s) - Blower - Side shift - Work lamp(s) Dcedpfxexvl Dwj Adhjn = Remarks = General Country of production: Germany Condition CE type: CE Fork positioner & side shift, Closed cabin with heating, New rear tires

Condition: excellent (used), functionality: fully functional, empty load weight: 5,630 kg, maximum load weight: 27,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2021, total length: 12,610 mm, total width: 2,500 mm, total height: 1,150 mm, color: black, trailer brake: trailer braked, Year of construction: 2021, Equipment: ABS, Göbel / System Trailer Interchangeable Chassis COS27 Rare special equipment! For sale is an exceptionally equipped Göbel 3-axle interchangeable chassis / container chassis in very good condition. The trailers have been used very little and have been well maintained. Due to the extensive special equipment, this is not a standard container chassis, but a technically very interesting and rare configuration. Of particular note is the combination of WABCO OptiLoad and a BPW trailing steering axle with Active Reverse Control. The first axle is designed as a lift axle with WABCO OptiLoad. The system ensures a permanently optimized fifth wheel load and load distribution via automatic air spring relief. The rear BPW steering axle steers in normal driving operation and also provides active support when reversing. The steering can be additionally influenced via the existing remote control. Especially when maneuvering and in confined spaces, this design offers a significant advantage over a conventional container chassis! The chassis is designed for various container configurations and features a twist-lock system and a gooseneck design. Equipment / special features: 3-axle interchangeable chassis / container chassis WABCO OptiLoad on the first axle first axle as a lift axle BPW trailing steering axle BPW Active Reverse Control steers when reversing remote control for the steering system WABCO EBS braking system WABCO SmartBoard / TIM with ECAS operation gooseneck design twist-lock container locking accommodation of various container sizes possible 2 stainless steel toolboxes with high-gloss polished front flap, approx. 1,000 x 500 x 500 mm ALCOA Dura-Bright aluminum rims 11.75 x 22.5 inches tires 385/55 R22.5 with M+S and snowflake symbol DUO-MATIC air connection Dedpfx Adjz D Umushjcn 15-pole electrical connection complete lighting system in LED design additional reversing lights high-quality KTL coating additional powder coating in RAL 9005 deep black The original new price for this extensive special configuration was over 50,000 € net. The main inspection (HU) will be renewed before delivery. Several interchangeable chassis are available. Two largely identically equipped interchangeable chassis are available in this design. Available designs or container accommodations: 10 ft 20 ft 30 ft 40 ft In addition, another interchangeable chassis for a 20-foot container is available. If desired, a suitable design / material container is also available. Further information on the individual chassis, container dimensions and available combinations is available upon request. A viewing is only possible after prior arrangement. Image note: AI-assisted adjustment of background, vegetation and lighting mood. Vehicle unchanged.

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 13,137 h, load capacity: 3,000 kg, lifting height: 6,455 mm, free lift: 2,074 mm, fuel type: gas, mast type: triplex, construction height: 2,841 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, Internal combustion engine forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic / 2-pedal Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 23x9-10 Rear tire condition: 80 - 100% Description: Delivery includes a new FEM 4.004 inspection certificate. If you have any further questions, please call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Visit our website for leasing and financing options. We would be happy to provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible, even if you do not purchase a device from us. The stated operating hours were recorded at the time the listing was created. Subject to prior sale, changes and errors. Side shifter, pre-installed side shifter Djdpfx Adsz Ecvgshecn 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, safety light, seat heating.