Used Z-Mat Cnc Lathe - Cycle-Controlled for sale (63,109)

Condition: used, Year of construction: 1994, operating hours: 26,793 h, functionality: fully functional, machine/vehicle number: 054204, turning diameter over cross slide: 520 mm, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 520 mm, swing diameter over cross slide: 290 mm, spindle speed (min.): 2,000 rpm, Lathe Ø520 x 1500 mm. 70mm through-bore and MK5 in the tailstock. Super precise bench. Has had the side rails and spindle in X renovated. Forkardt 315 mm centering chuck with many extra jaws and Multifix quick-change steel holder. Nice beginner bench if you want to try your hand at CNC. We have the chip tray and cooling water tank with the pump. It's just not shown in the photo. The control can be set to German, English, Spanish or Italian. I have all the documentation on the machine. The control is Phillips-Grundig and I can possibly help with training. Bwjdoy Sbh Tspfx Am Ron The bench weighs 3,000 kg so we can't load it with a forklift. It has to be picked up by crane truck.

Condition: defective spare-parts repository (used), Year of construction: 1994, operating hours: 68,921 h, functionality: not functional, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 500 mm, swing diameter over cross slide: 290 mm, quill stroke: 180 mm, spindle speed (max.): 2,800 rpm, overall weight: 3,200 kg, Good day, We hereby offer you, without obligation, a used, defective cycle lathe from the manufacturer Gildemeister. Manufacturer: Gildemeister Model: NEF 500 Plus Bodpey Hr U Hjfx Am Rjwn Year of manufacture: 1994 Total operating hours: 68,921 hours Turning diameter: 500 mm Turning length: 1,500 mm Control system: Manual Plus Spindle bore diameter: 70 mm Speed range: 8 – 2,800 rpm Gear stages: 3 Maximum swing diameter over cross slide: 290 mm Spindle nose: DIN 55027 size 8 Tool holder type: C Tailstock quill stroke: 180 mm Machine weight: approx. 3.2 t Dimensions (L x W x H): 3.0 x 1.8 x 1.8 m Note: The above technical data have been taken from the operating manual, manufacturer brochures, or other sources, for the accuracy and completeness of which we cannot accept any liability. Scope of supply: 1 used Gildemeister NEF 500 Plus cycle lathe Condition: The cycle lathe is not operational because the control does not power up. The machine can be inspected under power in our workshop, but cannot be put into operation. We are therefore selling the machine as defective. We would be pleased if this machine is of interest to you. Your Serviceteam Mertens & Frowein GmbH

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Bwjdpey Edz Asfx Am Ren Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: used, Year of construction: 2004, control Heidenhain turning length 1.000 mm turning diameter over bed 500 mm turning dia. over slide 290 mm centre distance 1.500 mm x-axis 260 mm z-axis 1.000 mm spindle bore 70 mm spindle tunring speed 3.000 U/min Bedpey A Tdbefx Am Rewn spindle motor 12 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2006, spindle bore: 130 mm, turning length: 600 mm, turning diameter: 1,800 mm, Turning diameter 1800 mm Turning length 600 mm Control Siemens 840 D Powerline 6-jaw chuck Spindle bore 130 mm Spindle nose DIN 55027 size 11 Spindle speed range 1 - 400 rpm Bwsdpsy Aw Svjfx Am Rjn Spindle torque 9000 Nm Total power requirement 38 / 52 kW Machine weight approx. 25 t

Condition: good (used), Year of construction: 2005, 1 used, well-maintained high-performance cycle lathe with FAGOR 8055 control, 8-position VDI 40 tool turret, constant cutting speed, pneumatic 3-jaw front chuck, and chip conveyor Manufacturer: MICROTURN, Origin Taiwan Model: Challenger BNC 2680X Year of manufacture: 2005 / Commissioned in 2006 Technical data: Center height: 325 mm Distance between centers: 2150 mm Swing diameter over bed: 650 mm Swing diameter over cross slide: 410 mm Swing diameter in gap: 870 mm Spindle speeds: 0 – 2,400 rpm Spindle bore: 82 mm Bwedsyy N Rfjpfx Am Ron Spindle motor: 15 / 22 kW Machine weight: 4,800 kg Accessories / Special Features: • Cycle control FAGOR 8055 with alphanumeric keypad o LCD color monitor o Graphical cycle simulation o 2 electronic handwheels • Pneumatic 3-jaw front chuck, make SMW, Ø 315 mm o By using this pneumatic front chuck, the entire spindle bore of Ø 82 mm remains available. With hydraulic chucks, the spindle bore is reduced by the required draw tube. • 8-position tool turret VDI 40 • Hinged belt chip conveyor • Fixed steady rest • Automatic headstock lubrication • Automatic lubrication of longitudinal and cross slides • Tailstock • Coolant system • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2008, Center height: 445 mm Center distance: 4000 mm Swing diameter over bed: 890 mm Swing diameter over cross slide: 550 mm Swing diameter in gap: 1150 mm Spindle speeds: 0 – 1480 rpm Spindle bore: 106 mm Spindle motor: 22 / 33 kW continuous rating / S 6 (40%) Machine weight approx. 12,500 kg Accessories / Special features: • Cycle control FAGOR CNC 8055i TC with alphanumeric keyboard o 10.4" LCD color monitor o Graphic simulation of cycles o Electronic handwheel for manual machine operation • 3-jaw chuck • 8-station tool turret • 2 fixed steady rests with rollers • Movable control panel • Automatic lubrication of headstock Bsdjyy Nlpopfx Am Rown • Automatic lubrication of longitudinal and cross slides • Tailstock with hydraulically operated quill • Coolant system • CE conformity Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: repair required (used), Year of construction: 2003, Kern lathe CD 402 Baij 2003 in top condition but with control system issues. Bedpfsxn Axcox Am Rown

Condition: excellent (used), Year of construction: 1998, turning diameter 410/ 440 mm turning length 950 mm control Siemens / Weiler D2 workpiece weight max 900 kg spindle head Gr 6 MK 6 spindle bore 54 mm face stroke 230 Bodpfx Aeyrh Apsm Rewn dia. of quill MK 4 mm quill stroke 120 mm centre height 200 mm thread pitch max. in mm 0,1 - 250 mm spindle turning speed - stepless 1 - 3000 U/min total power requirement 12 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,3 x 1,5 x 1,8 m

Condition: used, Year of construction: 2009, Technical details: turning diameter: 1250 mm turning length: 6000 mm spindle bore: 130 mm Turning rate: 5 - 710 U/min. turning diameter over bed slide: 850 total power requirement: 37/52 kW Bwedpfx Ameyktvxj Rsn weight of the machine ca.: 16 t dimensions of the machine ca.: 12 x 4 x 2 m Teach In Controll HEIDENHAIN 1 fixed steady *

Condition: used, Year of construction: 2001, turning diameter . mm turning length . mm control . type . CCUO turning diameter over slide rest . mm cross movement . mm spindle passage . mm Bedpfx Asyqwb Esm Rswn turning speeds . U/min transmission ratio . quill stroke . mm rapid traverse . m/min main drive motor . kW 3-jaw-chuck diameter . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm bed width 360 mm turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 Bsdpfjwizltjx Am Rswn - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp

Condition: used, Year of construction: 2000, centre height 280 mm centre distance 1200 mm turning diameter over bed 570 mm turning diameter over slide 365 mm turning length 1000 mm spindle taper DIN 55027 Gr. 8 control Sinumerik 810 D SIEMENS bed width 360 mm spindle bore 62 mm turning speed range 3 - 2500 U/min feed: 5000 mm / min rapid travel - longitudinal/face 10 m/min 3-jaw-chuck diameter 250 mm quick change toolholder SANDVIK Coromant Capto drive capacity - spindle motor 25 kW taper in tailstock-quill MK 5 Bsdpex E Dn Ajfx Am Rswn dia. of quill 100 mm quill stroke 190 mm voltage 400 V weight of the machine ca. 5,0 t dimensions of the machine ca. 3,55 x 2,20 x 1,95 m - Serial No.: 2022-3742-03 - CNC-Control SIEMENS Sinumerik 810 D - Rapid feed - Coolant equipment - Machine lamp

Condition: used, Year of construction: 1999, centre height 255 mm centre distance 1080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1000 mm spindle taper KK 8 DIN 55027 control Sinumerik 810 D SIEMENS bed width 360 mm spindle bore 70 mm turning speed range 2 - 2800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder MULTIFIX Typ B / CAPTO drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m chip conveyor 4,00 x 0,40 x 1,50 m - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX Bwodpfxoqzm Ngj Am Ren - coolant equipment - machine lamp

Condition: used, spindle bore: 90 mm, turning length: 2,000 mm, turning diameter over bed slide: 554 mm, turning diameter over top slide: 370 mm, center height: 280 mm, rotational speed (min.): 16 rpm, rotational speed (max.): 1,800 rpm, CNC Lathe Colchester Electronic Mastiff – Fanuc 20-T Manufacturer: Colchester Model: Electronic Mastiff Control: Fanuc Series 20-T Year of manufacture: unknown Technical Data (information without guarantee) Bsdpfx Asy Nl Hnjm Rjwn Swing diameter over bed: approx. 550 mm Swing diameter over cross slide: approx. 370 mm Centre distance: approx. 1000 / 2000 mm Spindle bore: approx. 90 mm Speed range: approx. 16 – 1800 rpm Spindle power: approx. 11 kW Feed rate range: approx. 0.01 – 500 mm/rev Condition & scope of delivery Machine in working condition (according to previous owner) Inspection by appointment Sale as seen

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm Bwedew E Nkiepfx Am Ron -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Condition: good (used), height of centers: 220 mm center distance: 1000 mm max. circulation-Ø over bed: 440 mm spindle boring: 52 mm spindle retainer: Gr. 6 mm retainer taper tailstock: 4 MK spindle speed: 37,5 - 3000 Upm forwarding feed: 7500 mm/U thread pitch: electrical connection: 400 V kW space needed: 2800 x 1480 x 1570 mm Bwjdpfx Amsd Scafj Ron weight: 2150 kg

Year of construction: 1995, condition: used, machine/vehicle number: 30-S/70, circulation-Ø: ueber Bett 625 mm max. center distance: 1500 mm spindle boring: 105 mm spindle speed: 6,6 - 2000 rpm space needed: 4400 x 2050 x 1820 mm Bwedps Nzhdefx Am Ren weight: 5200 kg

Year of construction: 1999, condition: ready for operation (used), A cycle-controlled CNC lathe Böhringer is available. Swing diameter over bed/faceplate: 570mm/365mm, center height: 280mm, bed width: 360mm, travel X: 345mm, cross slide dimensions X/Y: 260mm/680mm, bed slide guide length: 520mm, speed: 2500rpm, feed: 50mm/rev, rapid traverse X/Z: 10m/min/5m/min, quill stroke: 190mm, center angle: 60°, max. workpiece weight: 400kg/1000kg/1600kg. Documentation available. An on-site inspection is possible. Expected to be available July 2026. Bwjdoy Equyopfx Am Rsn

Condition: good (used), Year of construction: 1998, Circulation/rotation Ø over bed 475 mm Rotation/rotation Ø via cross slide 260 mm Bedpfx Amjwgn Ago Rswn Sledge path plan 260 mm centre distance 1500 mm power capacity 22 kW Gear stages. m= manual / e= electric. 2 e Spindle head DIN 55026 / DIN 55027 A6 / 6 Spindle Ø in front bearing 115 mm spindle bore 78 / 70 mm turning speed range (V-constant) 1 - 3.000 U/min feed range flat 1µ - 1.000 mm/U feed range lengthwise and thread 1µ - 2.000 mm/U Rapid traverse plan/longitudinal 5 / 10 m/min diameter of quill 70 mm quill travel 120 mm quill inner cone 5 MK This machine is used for the production of individual parts and small batches from simple to the most complex contours. It is characterised by: --> Ease of operation Precision Working range

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Bodpfx Aeyyniasm Rjwn Technical details are shown on picture.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: K0118120267, spindle bore: 86 mm, turning length: 1,000 mm, turning diameter over bed slide: 440 mm, quill stroke: 160 mm, quill diameter: 75 mm, center height: 220 mm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 6 m/min, spindle speed (max.): 2,000 rpm, feed rate X-axis: 6 m/min, feed rate Z-axis: 8 m/min, bed width: 330 mm, total length: 27,000 mm, total width: 19,000 mm, total height: 22,200 mm, workpiece weight (max.): 261 kg, overall weight: 1,800 kg, rotational speed (max.): 2,000 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 920 mm, power: 0.009 kW (0.01 HP), Equipment: rotational speed infinitely variable, in the following version: - CNC control SIEMENS 828D BASIC T - STORE TURN SOFTWARE - Spindle holder: DIN 55029 / KK 8 - Morse taper of the main spindle: MK 5 - Morse taper in the quill: MK 5 - Steel holder head B - Torsion steel holder BD 25140 (3 pcs.) - Turning steel holder BH 32130 (1 pc.) Bsdpfx Ajra Ehrjm Rewn - Schunk 3-jaw lathe chuck Ø 250 mm Type ROTA-G 250-82 D8, DIN 55029, Bore Ø 82 mm, steel body, incl. hard base jaws, art. no. 815026 - Incl. accessory package (see photo), without turning tools! - Full cladding - Chip tray can be pulled out to the front - Automatic central lubrication of the slideways - Ball screw in X- and Z-axis - Movable panel with electric handwheels for X- and Z-axis - 3-color status light - Work area lighting - Coolant device - Reducing sleeve for main spindle - Set of operating tools - Technical documentation - CE version

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, turning diameter over cross slide: 380 mm, spindle bore: 56 mm, turning length: 345 mm, turning diameter: 380 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, overall weight: 4,200 kg, torque: 72 Nm, travel distance X-axis: 166 mm, travel distance Z-axis: 339 mm, 2 DMG Gildemeister CTX 210 for sale: One from 2007 and one from 2006. Model V2 Very few spindle hours. CNC Siemens 840D, 12-position turret VDI 30. Supplied with some tooling + documentation for each machine. Test possible by appointment. Bwsdpfxjyw Ndto Am Rjn

Condition: used, Year of construction: 1998, turning diameter 555 mm turning length 4000 mm control Monforts Control System type MTC-K CCUO turning diameter over slide rest 290 mm cross movement . mm spindle passage . mm turning speeds 1600 U/min transmission ratio . quill stroke . mm rapid traverse . m/min main drive motor . kW 3-jaw chuck Rotha-S Plus 3-jaw-chuck diameter . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m Serial number: 262/01 Machine number: Bwedpfjyqv N Uox Am Rsn Quick-change tool post Coolant system Monitor Chip conveyor The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2004, - Fagor digital display - Accessories available Working area Max. turning diameter over bed: 350 mm Max. turning diameter over cross slide: 200 mm Centre height: 180 mm Bodpfsyvy Rnjx Am Rewn Centre distance: 1000 mm Bed width at guideway level: 255 mm Top slide travel towards headstock: 60 mm Top slide travel away from headstock: 55 mm Spindle nose with flange according to ISO 702-3 (DIN 55027) C6 (DIN 6) Spindle taper: Morse taper 6 Spindle bore: 54 mm Tailstock quill taper: Morse taper 4 Tailstock quill travel: 100 mm Tailstock lateral adjustment: ± 10 mm Spindle speed range, stepless: 40 – 2500 rpm Feed levels: Longitudinal feed: 9 Cross feed: 9 Feed rates: Longitudinal feed: 0.04 - 0.4 mm/rev Cross feed: 0.02 - 0.2 mm/rev Metric threads: Number: 28 Pitch: 0.2 – 4.5 mm Inch threads: Number: 21 Pitch: 76-8 TPI Module threads: Number: 28 Pitch: 0.2-4.5 mm Diametral pitch threads: Number: 21 Pitch: 76-8 DP Leadscrew thread pitch: 6 mm Tool holder section: 20x20 mm Max. spindle torque: 200 Nm Main drive power: 4 kW (5.5 HP) Electric pump power: 0.12 kW (0.16 HP) Synchronous speed of main motor at 50 Hz: 1500 rpm / at 60 Hz: 1800 rpm Synchronous speed of coolant pump motor at 50 Hz: 3000 rpm / at 60 Hz: 3600 rpm Machine dimensions Length x width x height: 2300 x 940 x 1400 mm Weight: 1500 kg