Used Weiler Weiler E120X3000 for sale (206)

Condition: excellent (used), Year of construction: 2020, Steady rest for WEILER E40 and E50 lathe In very good condition. Price for E40 steady rest: €2,500 Cedpfxetx Avko Agfegu Price for E50 steady rest: €2,850 Clamping range: 10 – 150 mm.

Condition: excellent (used), turning diameter over bed 260 mm spindle passage 28 mm turning length 300 mm centre height 130 mm Codpey Ivdzjfx Agfsgu turning speeds 125 - 2800 U/min total power requirement 3 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,4 x 0,6 x 1,4 m

Condition: reconditioned (used), Year of construction: 1989, Universal lead and spindle lathe Make: WEILER Model: Condor B Codpfxog R S Rcs Agfogu Year of manufacture: 1989 - overhauled newly painted RAL 7035 light gray Mach. No.: 1401 with guarantee Accessories: - 3-A digital display FAGOR Innova 30i T, new - Chuck protection hood with electrical fuse, new - Quick-change tool holder base body size B - Bed stop - Coolant device - Chip back wall - Operating instructions -used, as seen -

Condition: refurbished (used), Year of construction: 2007, Universal lead and feed spindle lathe Make: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light gray Mach. no.: CK17 Center height: 140 mm Center width: 500 mm Spindle bore: 40 mm with guarantee geometric acceptance with test report Accessories: - 3-A digital display SIEMENS - Chuck protection hood with electrical protection - Drive motor braked - Quick-change tool holder base body size A - Bed stop Codpfev D Ip Nsx Agfjgu - Covered lead and feed spindle - Chip rear wall - Pull-out chip tray - Operating instructions - Used, as seen -

Condition: reconditioned (used), Year of construction: 1990, Universal lead and feed spindle lathe Cjdpfxehy Tdyo Agfegu Make: WEILER Model: Praktikum 160 B Year of manufacture: 1990 - overhauled newly painted RAL 7035 light gray Mach. no.: 90-160-2054 Center height: 160 mm Center width: 650 mm geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i T - covered lead and feed spindle - braked drive motor - coolant system - electrically secured chuck protection hood - quick-change tool holder size A - simple bed stop - chip back wall - operating instructions with guarantee used as seen The machine is technically corresponding to the state of the year it was built.

Condition: reconditioned (used), Year of construction: 1974, Universal lead and spindle lathe Make: WEILER Model: Commodor Year of manufacture: 1974 - overhauled newly painted RAL 7035 light gray Mach. no.: 0068 Center height: 180 mm Center width: 1000 mm Cgedpfx Ajmgaddjgfou Spindle bore: 56 mm with guarantee geometric acceptance with test report Accessories: - 3-axis digital display FAGOR Innova 30i-T new - Chuck protection hood with electrical protection - Quick-change tool holder size B - simple bed stop - Coolant device - Operating instructions - used, as seen -

Condition: like new (used), Year of construction: 2015, GDW LZ 280 VC Cgjdpey Sbqnofx Agfsu Lathe GDW LZ 280 VC with GDW digital display, year of manufacture 2015, in very good original condition. The machine comes from the special construction division of a renowned German engineering company. CE-compliant!! Technical Data: Year of manufacture: 2015 📐 Working Area & Dimensions • Center height: 165 mm • Distance between centers: 670 mm • Swing over bed: 330 mm • Swing over cross-slide: 190 mm • Bed width: 220 mm • Machine weight: approx. 1,100 kg • Footprint (L x W x H): approx. 1,570 x 1,035 x 1,800 mm ⚙️ Main Spindle & Drive • Speed range: 30 – 5,000 rpm (infinitely variable) • Drive power: 7.0 kW to 7.5 kW • Spindle bore: 43 mm • Spindle nose: DIN 55027 (size 5) 🛠️ Carriage & Tailstock • Cross slide travel: 165 mm • Top slide travel: 115 mm • Swivel range of top slide: +75° / -65° • Tailstock taper: MT 3 About the Machine: The GDW LZ 280 VC is the smallest machine in the GDW range. It is a lathe designed for the highest demands, featuring stepless speed control, constant cutting speed, and an impressive 7.5 kW drive power (at 40% duty cycle). This compact powerhouse excels in environments where space is at a premium but maximum precision is required, such as optics workshops, electrical and automotive workshops, laboratories, and even in Formula 1. Offered here is a GDW LZ 280 VC lathe with GDW digital display, year 2015. This lathe is in very good original condition. It comes from a company where it was only used occasionally for special construction projects. The machine features a very user-friendly control system. The guideways are regularly lubricated via central lubrication. The GDW LZ 280 VC has been mechanically and electrically tested by us. Take the opportunity to inspect and test the GDW LZ 280 VC under power on site. You can find more lathes from reputable manufacturers on our website.

Condition: good (used), Year of construction: 1996, functionality: unexamined, turning diameter over cross slide: 700 mm, turning length: 2,000 mm, turning diameter: 700 mm, spindle bore: 106 mm, spindle speed (max.): 1,800 rpm, For sale: Cgjdpfx Agsy R Dyvefeu 1 unit used lead- and feed-screw lathe Manufacturer: Weiler Werkzeugmaschinen Model: E70 Year of manufacture: 1996 Technical data: Centre height: approx. 355 mm Swing over bed: approx. 700 mm Swing over cross slide: approx. 420–450 mm Distance between centres: 2000 mm Spindle bore: 106 mm Including the illustrated documentation, chip conveyor and Sauter tool holder. The machine can be inspected at our warehouse in 09599 Freiberg.

Condition: ready for operation (used), WEILER PRIMUS / MD-G / Mechanic's Lathe - Centre height: 125 mm - Centre distance: 400 mm - Speed range: 40-3000 rpm - Spindle bore: 24 mm - Electric chuck guard - Multifix base holder with inserts - Tailstock with drill quill - Four-jaw chuck - Work lamp - Bed stop - Documentation Dimensions (LxWxH): 1.3 x 0.8 x 1.6 meters / Weight: 450 kg Subject to errors and input mistakes. Cgodpfx Asy Sm Dtjgfju

Condition: ready for operation (used), Weiler C30 – a wide range of accessories available. Cedpoy S E Haefx Agfsgu

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Cgjdpfx Ajvadqzegfsu Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 2007, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, overall weight: 3,800 kg, number of axes: 2, Horizontal turning machine manufactured in 2007. This Weiler E55X1000 features maximum turning diameter of 315 mm and a a center distance of 1100 / 2100 mm. It is equipped with a Sauter 8-fold tool system and a spindle speed range of 1 – 2500 rpm. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details regarding this machine. Cgodpfx Agoy Em A Aefju • Internal taper: Metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Flange diameter: 500 mm • Maximum turning diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: Sauter 8-fold • Number of tool positions: 8 • Tool shank size: 32 x 25 mm • Turret interface: Capto C4 • Number of face slides: 1 • Center distance: 1100 / 2100 mm • Turning length: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Continuous duty speeds (S1):Gear stage I: 89 rpmGear stage II: 355 rpm • Emission level: 80 dB(A) • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: Ball screw in Z axis makes noise, but dimensional accuracy is not affected Additional equipment • Extraction system Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 1,100 mm, total height: 1,750 mm, total width: 1,850 mm, overall weight: 3,800 kg, product length (max.): 2,850 mm, number of axes: 2, Horizontal turning machine manufactured in 2004. This Weiler E55X1000 features a maximum chuck diameter of 315 mm and a spindle diameter of 120 mm. It includes a robust tool system with a turret and offers a cutting speed of 140 m/min. If you are looking to get high-quality turning capabilities, consider the Weiler E55X1000 machine we have for sale. Contact us for further details. • 20 kW = real power (mechanical/electrical output) • 27 kVA = apparent power (includes reactive power) • Internal taper: metric 90 • Spindle diameter in front bearing: 120 mm • Spindle bore: 83 mm • Max. faceplate diameter: 500 mm • Maximum chuck diameter: 315 mm • Maximum torque: 1600 Nm • Tool system: turret (VDI 40) • Tool shank size: 32 x 25 mm • Number of longitudinal slides: 1 Cjdpfx Aey Em Avegfogu • Number of cross slides: 1 • Center distance: 1100 • Cross travel: 340 mm • Tailstock taper: MK 5 • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Maximum tailstock travel: 1000 / 2000 mm • Feed rate longitudinal: 0.001 – 20 mm/rev • Feed rate cross: 0.001 – 20 mm/rev • Rapid traverse longitudinal: 10 m/min • Rapid traverse cross: 5 m/min • Feed force longitudinal: 10000 N • Feed force cross: 7000 N • Metric thread range: 0.1 – 250 mm • Whitworth thread range: 1/4 – 56 threads/inch • Module range: 0.125 – 28 • DP range: 0.05 – 48 • Maximum cutting cross section: 2.25 mm² • Cutting speed: 140 m/min • Gear stage I: 89 rpm at 100% duty cycle • Gear stage II: 355 rpm at 100% duty cycle • Coolant consumption (normal): 30 l/min at 0.4 bar • Coolant consumption (increased): 30 l/min at 3.5 bar • Noise level: 80 dB(A) • Electrical: • Operating voltage: 400 V • Control voltage: DC 24 V • Connected load: 30 kVA • Nominal current: 43 A • Frequency: 50 Hz • Main fuses: 50 A • Condition note: A small actuator that switches between the gear stages is defective; both gear stages are functioning. Additional equipment • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: new, Year of construction: 2025, - New machine - Precision lathe with automatic cycle control, for chuck and shaft machining. Brand: WEILER | Model: E 120 x 4500 | Year of manufacture: 2025 The precision giant. A powerful and energy-efficient production lathe with optimum accessibility. The machine for heavy workpieces. Maximum cost-effectiveness from turning to milling. Precise and universally applicable, it impresses with: - State-of-the-art control and drive technology - Extremely simple operation and programming - Highest accuracy - Longevity - User-friendly ergonomics Csdpfx Agsy Hfy Aofsgu TECHNICAL DATA / ACCESSORIES, EQUIPMENT: Control system: Weiler cycle control ONE 1 (Siemens) Working range: - Centre height: 600 mm - Swivel diameter over bed: 1.200 mm - Swivel diameter over cross slide: 830 mm - Centre distance: 4.500 mm Extensive, high-quality equipment. Sales within Germany include a 24-month warranty. No guarantee is given as to the completeness and accuracy of the technical specifications or the equipment. - Subject to prior sale - Detailed technical data sheet and information on the equipment available on request.

Condition: excellent (used), Year of construction: 1998, turning diameter 570 mm turning length 1000 mm control Siemens / Weiler D2 weight of the machine ca. 3,2 t Cjdpfoy D T Uvsx Agfjgu dimensions of the machine ca. 3,0 x 2,0 x 1,9 m

Condition: excellent (used), Year of construction: 2004, Weiler Primus VC Lathe Primus VC with Heidenhain digital readout, year of manufacture 2004, in excellent original condition. The machine comes from the prototype workshop of a renowned German mechanical engineering company. CE compliant! Technical Data: Year of manufacture: 2004 Weiler Primus VC Center height: 140 mm Center distance: 500 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill stroke: 85 mm Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Voltage: 400 V Dimensions: approx. 1.50 x 1.00 x 1.50 m (L x H x W) Weight: approx. 700 kg Additional equipment and accessories: Heidenhain control panel, chuck guard, leadscrew and feed shaft cover, emergency stop, operating manual, CE conformity declaration Cgodpfxsy I U Dye Agfju About the machine: The Weiler Primus VC is the smallest machine in the Weiler range. The Weiler Primus VC is a lathe for the highest demands: with stepless speed control, constant cutting speed, and a powerful 4 kW drive (40% duty cycle). The compact machine of great quality is found wherever maximum precision is required in limited spaces: such as in optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a Weiler Primus VC lathe with Heidenhain digital readout, year of manufacture 2004. This lathe is in excellent, original condition. It comes from an operation where it was lightly used only for prototype construction. Very easy-to-use controls. The guideways are regularly lubricated via central lubrication. The Weiler Primus VC has been mechanically and electrically tested by us. Take the opportunity to view and test the Weiler Primus VC under power at our site. Further lathes from well-known manufacturers can be found on our website.

Condition: good (used), Year of construction: 1991, Machine type Lathe - cycle-controlled Manufacturer WEILER Type E30 year of construction 1991 Control Weiler Country of origin Germany Additional information Cycle-controlled lathe WEILER - E30 Technical details Turning diameter max. 330 mm Turning length 750 mm Weiler control Center height 165 mm Swing diameter over bed 330 mm Max. turning diameter over facing slide 160 mm Face slide travel 180 mm Longitudinal bed slide travel 395 mm Main spindle: Cgjdpor Dvqzsfx Agfju Speed range - main spindle 1 - 4,500 min/-1 Drive power - main spindle 9 / 11 kW Max. Torque 165 Nm Spindle head DIN 55027 / 5 Spindle diameter in front bearing 70 mm Spindle bore 40 mm Usable bar diameter ( - ) mm Tool holder: Type MultiFix Turning tool shank cross-section 20 x 20 mm Tailstock: Quill stroke 110 mm Quill diameter 50 mm Tailstock holder MK 3 Feed rates: Rapid traverse max. 10 m/min Feed force 6 / 3 kN Feed range 0 - 20 mm/-1 Thread cutting: metric 0.1 - 400 mm Inch 1/4 - 56 G/1" Module 0.125 - 28 mm.II DP 1 - 224 G/".II Number of threads max. 50 Total power requirement 10 kVA Machine weight approx. 1.5 t Space requirement approx. 2.8 x 2.0 x 2.0 m

Condition: ready for operation (used), Year of construction: 1998, operating hours: 35,626 h, spindle speed (max.): 3,000 rpm, number of axes: 2, Horizontal turning machine manufactured in 1998. This Weiler E35 features a center distance of 950 mm and a swing over bed of 410 mm. It has a spindle bore of 54 mm and a maximum torque at spindle of 700 Nm. If you are looking to get high-quality turning capabilities, consider the Weiler E35 machine we have for sale. Contact us for further details. Center distance: 950 mmCenter height: 200 mmSwing over bed: 410 mmSwing over cross slide: 200 mmCross slide travel: 230 mmCarriage guide length: 480 mmSpindle nose: DIN 55025 size 6Spindle bore: 54 mmSpindle taper: Morse taper 6Drive power (100% / 60% duty): 7.5 / 9 kWMaximum torque at spindle: 700 NmSpeed range: 1–3000 rpmSpeed range gear stage I: 1–750 rpmSpeed range gear stage II: 4–3000 rpmTailstock quill diameter: 65 mmTailstock quill travel: 120 mmTailstock taper: Morse taper 4Tool system: Parat size 2Control: D2Number of axes: 2 (X, Z) Cgsdpfx Aoy Axu Sjgfou Technical Specification Counter Spindle No Driven Tools No

Condition: good (used), Year of construction: 2000, Ref. -No.: 10623 Manufacturer: WEILER Type: E90 x 4500 Year of construction: 2000 Type of control: CNC Control: SIEMENS D1 - Zyklen Storage location: Halberstadt Country of origin: Germany Bed width: 600 mm Turning Length: 4500 mm Swing Diameter Over Bed Slide: 900 mm Spindle Bore: 128 mm Max. Torque: 6000 Nm Feed Capacity - Z: 20000 kN Feed Capacity - X: 20000 kN Rapid Speed: 10/5 RPM Tailstock Quill Diameter: 140 mm Tailstock Quill Stroke: 300 mm Lathe tool dimensions: 32 x 25 mm Front bearing diameter: 178 mm Cgsdpfx Agoy Ed Rqsfsu Circumferential diameter over facing slide: 530 mm Spindle head according to DIN 55027 (size): Gr. 11 Tailstock inner cone: MK 6 / 140 Type Machine length: 6900 mm Machine width: 2600 mm Machine Height: 2150 mm Weight Of The Machine Ca.: 10,5 t Further information: The machine can be viewed while powered up.

Condition: ready for operation (used), L & Z Lathe / WEILER CONDOR VS 2 with new 3-axis digital readout from training workshop - 3-axis digital readout "NEW" - Center height: 165 mm - Swing diameter over bed: 330 mm - Center distance: 800 mm Cedoy Ral Ijpfx Agfegu - Speed range: 28 - 2800 rpm - Automatic longitudinal / cross feeds - Spindle bore - Tailstock with center - Collets / quick-clamping device incl. 25 collets - 3-jaw chuck Röhm 200 mm with reversible jaws - Multifix / new with insert - Work light - Emergency stop - Bed stop - Machine feet - Documentation Dimensions: LxWxH 2x0.8x1.6 meters / Weight 900 kg Subject to errors and input mistakes.

Condition: used, WEILER Commodor incl. 3-axis digital readout Heidenhain - 3-axis digital readout / Heidenhain - Center height: 180 mm - Swing diameter over bed: 330 mm - Distance between centers: 1000 mm - Spindle bore: 56 mm - Spindle speeds: 25–2000 rpm - Automatic longitudinal / cross feeds - Thread cutting / metric / imperial / module etc. - Multifix toolpost with inserts - Chuck guard - 2x emergency stop - Three-jaw chuck - Chip guarding rear wall Csdpfxey Dcppj Agfogu - Very well-maintained condition - Machine feet - Documentation Dimensions: LxWxH 2.3x1.2x1.6 m / Weight 1600 kg Errors and omissions excepted.

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Cgsdpfjy Rx I Iex Agfou

Condition: used, Year of construction: 1970, Weiler lathe with tailstock Cgjdehtnu Tjpfx Agfju

Condition: excellent (used), Year of construction: 1998, turning diameter 410/ 440 mm turning length 950 mm control Siemens / Weiler D2 workpiece weight max 900 kg spindle head Gr 6 MK 6 spindle bore 54 mm face stroke 230 dia. of quill MK 4 mm Codpfx Aeyrh Apjgfogu quill stroke 120 mm centre height 200 mm thread pitch max. in mm 0,1 - 250 mm spindle turning speed - stepless 1 - 3000 U/min total power requirement 12 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,3 x 1,5 x 1,8 m

Condition: ready for operation (used), L&Z Lathe WEILER LZ 330 incl. new 3-axis digital readout (from educational facility) - "NEW" 3-axis digital readout - Center height 165 mm - Swing over bed 330 mm - Turning length 800 mm Cgedey Id Uhspfx Agfou - Spindle speed range (gearbox) 25–2800 rpm - Automatic longitudinal/cross feeds - New Multifix toolpost with holders - Three-jaw chuck - Collet system with 20 collets - Original copy attachment - Various accessories - Documentation Dimensions (LxWxH): 1.8x0.7x1.6 meters / Weight: 800 kg Errors and omissions excepted.