Used Wanner Technik Rotor Knives, 7 Pieces for sale (39,158)

Condition: used, Year of construction: 2013, operating hours: 73,000 h, functionality: fully functional, power: 7,130 kW (9,694.09 HP), output frequency: 50 Hz, nominal power: 7,130 kW (9,694.09 HP), continuous power: 7,130 kW (9,694.09 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: M+M Turbinen-Technik, Evaporation pressure: 21 bar Bjdjz E Nh Nopfx Aa Ijdh Steam pressure: 4.3 bar Temperature: Inlet 365 °C / Outlet 165 °C Generator: 8300 kWel Operating hours (annually): 8760 h/year Transformers included: Siemens Type 4GU6043-9HY Total operating hours: 73,000 h M+M turbines are typically custom-made industrial steam turbines used for combined heat and power (CHP) or for energy recovery from process steam. Due to the moderate inlet pressure and the relatively high outlet pressure, this is a back pressure steam turbine. It was designed for process steam systems to ensure efficient energy recovery and heat supply. The turbine was used in a paper mill to increase efficiency. With an output of 7.2 MW, this turbine is considered a medium-sized system in industrial applications. Thanks to the pressure ratios and the use of the turbine's exhaust steam, very little energy is lost. The estimated steam flow rate is 30 to 40 t/h. This enabled the paper mill to achieve an efficiency of 60% to 75%. The efficiency in CHP operation was approximately 75% to 85%. The turbine was designed for operation for 8,760 hours (full load year) with a maximum steam flow rate of 114 t/h. The turbine-generator unit supplies the paper machine with electricity at the 6 kV level. The process steam required for production is provided in two pressure stages. As the steam flows through the turbine, the steam pressure is reduced from 20 bar to 4.2 bar. If the turbine needs to be shut down for any reason, the process steam supply is provided via four pressure reducing stations connected in parallel.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: WL-01990-21, Industrial heater for oil & gas, 19,000 m3 per hour. Consumption: 302 kW. The burner is a Riello burner, and the gas valve unit is from DUNGS. Bjdezyubyopfx Aa Ijdh In new condition.

Condition: used, Year of construction: 2011, Overview This M+F KEG-Technik MICROMAT M 1/1-F KeyKeg is a semi-automatic filling machine for one-way KeyKegs, built in 2011 by M+F KEG-Technik (Bottrop, Germany) and used in a Belgian brewery. The machine fills 20 l and 30 l KeyKegs at 50-60 kegs per hour. It became redundant when the brewery switched its production from one-way KeyKegs back to returnable stainless steel kegs. It has already been dismantled, is in storage and can be inspected on request. Technical data - Manufacturer: M+F KEG-Technik - Model: MICROMAT M 1/1-F KeyKeg - Year of manufacture: 2011 - Machine type: semi-automatic KeyKEG filling machine - Capacity: 50-60 KeyKegs per hour - Container formats: 20 l and 30 l KeyKEG - Fitting type: KeyKEG fitting - Connection voltage: 230/400 V, 50 Hz Equipment - EC Declaration of Conformity (Machinery Directive 2006/42/EC) - Technical documentation Condition Used. The machine has already been dismantled and is stored. Availability Immediately available. Location: Belgium. Handling and truck loading are included. Bjdpfx Ajzrihxea Iodh

Condition: new, diameter / mm Cutting (quantity) / weight / kg Bjdpfx Asu Dbz Asa Iodh Rotor type: rotor FK.213.570 11 05.01 MAT number: 000.213.570 Condition: new incl. test report

Condition: excellent (used), functionality: fully functional, 5 Koch separation cyclones from a cleanroom production. Only PP without glass fibers was used! The units are in like-new condition. One unit has an additional vacuum shut-off valve. 4 machine hoppers. The original price was approximately €14,500. Price per unit: €990. Bedpfxjxdfxwo Aa Ijdh Total price if you purchase all 5 units: €4,500.

Condition: good (used), Tool holder, milling tool holder -Number: 7x SK50 recording Bdedjb A N E Tepfx Aa Ish -Inner diameter: 32 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for: tool changers -Sale: only complete set -Weight: 4.6 kg

Condition: good (used), tool holder, milling holder, milling tool -7x shots: SK40 -Adapter -Mounting: SK40 Bodec Il Ehjpfx Aa Iodh -Holder tool: MK4 -Drill chucks, face chucks, reducing sleeves, cutter heads, shell end mills, spindle tools -Sale: only complete -Weight: 9.4 kg

Condition: used, Year of construction: 1996, functionality: fully functional, conveyor belt length: 10,370 mm, conveyor belt width: 650 mm, conveyor belt speed: 600 mm/s, total length: 10,400 mm, total width: 820 mm, total height: 300 mm, overall weight: 200 kg, power: 0.75 kW (1.02 HP), input voltage: 220 V, input frequency: 50 Hz, input current: 2 A, motor manufacturer: LENZE, Manufacturer: Combi-Staufner-Technik-GmbH Year of manufacture: 1996 Overall dimensions (L x W x H) in mm: 10,400 x 820 x 300 Width including sidewall in mm: 720 Width including drive in mm: 820 Bdedpjzun Ddefx Aa Ioh Side rail height in mm: 105 Conveyor length in mm: 10,370 Conveyor width in mm: 650 Belt type: PVC, smooth Belt width in mm: 650 Running surface: Sheet metal Drive: Head drive Motor type: Geared motor Motor manufacturer: Lenze Motor specifications: 0.75 kW, 50 Hz, 2–3.5 A, 220–480 V Motor position (in conveying direction): left Conveying speed in m/s: 0.6 Net weight in kg: 200 Condition: used / fully functional Functional test: OK

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, The separating device from trio-technik is for sale. This unit is designed for the separation of objects with various geometries. Length: 950 mm Width: 700 mm Height adjustable: 700-1380 mm Possible gap width: 50 mm Tilt angle: max 20 degrees Drive/three-phase current: 400V 50Hz Power consumption: 0.09 kW/h Speed adjustable. Bodpfx Asx Dm Rzja Iodh

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 358143, Hydra-Cell G10XKSGSFEMB diaphragm high pressure pump with 4 kW motor, build in inverter, manual control unit (on/off and speed), external cooling and 34,5-69 bar over pressure valve. Possible to switch to different control modes and ramps through DIP switches. Model: G10 X: Standard high-pressure performance K: Kel-Cell version S: 316L pump head G: Vition/FKM Diaphragm and O-ring S: 316L valve seat F: 316L valves E: Elgiloy valve springs M: Kynar/PVDF valve spring retainer Bdodozv Ibfspfx Aa Ioh B: 10W30 motor oil 30,6 liter/min (1,8 m3/h) at 1450 RPM. 69 bar (1000 psi) at 1450 RPM and 103 bar (1500 psi) at 790 RPM. Max inter pressure of 17 bar and 121 degree celcius maximum fluid temperature. Able to handle solid particles up to 500 microns (0,5 mm) It has a crack in the back left mounting foot (see picture)

Year of construction: 2019, condition: excellent (used), Weiss Technik SaltEvent SC 1000 Salt Spray Chamber Bdsdpjzg Er Asfx Aa Ish Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Machine type: Salt spray chamber / corrosion testing device Size: 1000 liters For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. This device is suitable for salt spray tests, corrosion tests, condensation water tests, material tests, surface tests, as well as applications in quality assurance, research, and development. Technical data: Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A, slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Test chamber / load: Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Storage surface, machine part cover: 5 kg Temperature and test data: Temperature range, salt spray test: Ambient temperature +5 K to +50 °C Temperature range, condensation water test: Ambient temperature +5 K to +42 °C Temperature, compressed air humidifier: Ambient temperature +5 K to +70 °C Temporal temperature constancy: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment: S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking mechanism Temperature monitoring Interface Documentation as shown in the pictures Connections: Power connection 230 V / 50 Hz Compressed air connection Connection for demineralized water Exhaust connection Water drain / condensate drain Application areas: Salt spray test Corrosion test Condensation water test Material test Surface test Coating test Automotive Quality assurance Research and development Condition: Used Functional testing performed before delivery. Optical condition as shown in the pictures. Scope of supply: Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Documentation as shown in the pictures Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: good (used), end mill, end mill, milling cutter -Finishing cutter -Various: Diameter -Various: Manufacturers -Price/Sale: complete -Quantity: 7 pieces Bdodpfx Aajb A Rixo Ijh -Weight: 9 kg

Condition: ready for operation (used), Year of construction: 2014, A Polo slant bed filter with vacuum filter endless belt design and enlarged storage tank is available. Capacity: 5000l, max. operating temperature: 60°C, flow rate per minute emulsion/oils: 650l/200l, dirt chamber capacity: approx. 400l, vacuum chamber capacity: approx. 140l, connected load: 5kW. Filter unit dimensions X/Y/Z: approx. 2450mm/1650mm/1550mm, filter unit weight: approx. 1150kg, total weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Bdedpfx Aaey Eg Dyo Ish

Condition: new, power: 90 kW (122.37 HP), Year of construction: 2026, A double rotor hammer crusher is a type of crusher in which two rotors are mounted on a single shaft, combined to form a spinning rotor. The double rotor arrangement enhances the crushing capabilities and provides a more efficient and reliable crusher design compared to single rotor crushers. Here are some key features and aspects of a double rotor hammer crusher: 1. Two Rotors: As the name suggests, the crusher has two rotors that rotate in opposite directions on a common shaft. This dual rotor configuration allows for increased impact and crushing power. 2. High Capacity: The dual rotor design enables the crusher to handle larger feed sizes and higher capacity compared to single rotor crushers. It is suitable for crushing materials with high hardness and large sizes. 3. Versatility: Double rotor hammer crushers are versatile and can be used in various applications, including the reduction of limestone, gypsum, coal, and other similar materials in the mining, cement, and building materials industries. 4. Impact Crushing: The primary mechanism of crushing in a double rotor hammer crusher is through the impact of the hammers against the material. The material is fed into the crusher, and the high-speed rotating hammers impact and shatter the particles. Bdedpfx Aajq Nf Ens Ieh 5. Adjustable Gap Settings: These crushers often have adjustable gap settings between the rotors and the impact bars, allowing control over the final particle size. 6. Durability: The robust design of the double rotor hammer crusher makes it durable and capable of handling tough materials and continuous operation. 7. Reduced Wear: The dual rotor arrangement can help distribute wear more evenly across the hammers and other wear parts, potentially extending the overall lifespan of the crusher. Typical Technical Specifications While exact numbers vary by manufacturer, these are the standard ranges for industrial models: Model (Rotor Size),Max Feed Size,Output Size,Capacity (t/h),Total Motor Power 600 × 400,≤110 mm,≤3 mm,10 – 15,18.5+18.5 kW 800 × 600,≤120 mm,≤3 mm,40 – 50,45+45 kW 800 × 800,≤180 mm,≤3 mm,50 – 60,45+55 kW 1000 × 800,≤180 mm,≤3 mm,70 – 80,75+55 kW 1100 × 1000,≤200 mm,≤3 mm,70 – 100,90+110 kW 1400 × 1200,≤200 mm,≤3 mm,90 – 110,132+160 kW For more details about double stage hammer crusher, or double rotor crusher, welcome to leave us a message, our team will get back to you at the earlist.

Condition: new, Machine type: Vacuum dough divider Model: VD 100-700 The dough dividing machine is the latest system of dough processing technology Cut the dough to the required weight without pressing and damaging it All surfaces that come in contact with the test are made of stainless steel Weight range: from 100gr to 700gr Capacity: 1800 - 2400 pieces per hour Bdjdpfx Aaeuuclpo Ioh Dimensions: 1370/1780 x 650 x 1600 mm Weight: 420kg Electrical power: 1.75kW

Year of construction: 2008, condition: used, Two identical separating tables are available, screen width: 890mm, screen length: 1000mm, screen area per screening deck: 0.89m², number of screening decks: 1, number of outlets: 2 (light/heavy material), screen clamping: manual/pneumatic, dimensions with outlets: 1738x1287x1351mm, dimensions without outlets: 1140x1287x1351mm, weight: 700kg, an on-site inspection is possible. Bdsdpozyq Txefx Aa Ieh

Condition: good (used), total height: 890 mm, Tension tower, manufactured by Lang Bodpfsz E Sahjx Aa Ijdh 192 x 192 mm square Height 890 mm or 860 mm, excluding adapter plates Base plate 384 x 384 mm Weight approximately 200 kg Several of these tension towers are available.

Condition: used, proximity switch -Ø: 3.6 x 20.5 Bdodjdnuhwopfx Aa Ioh -stainless -Protection class: IP 67 -Number: 7 pieces -Price: complete -Weight: 70 g

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Processing interval: automatically time-controlled Motor power: 3 kW Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Bdodpfx Aez Ekbksa Ioh Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042

Condition: used, Nordson Problue 7 Hot Melt Pump Model Problue 7 Bdsdpfxowq S Eyo Aa Ieh

Condition: good (used), Year of construction: 2004, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,320 mm, travel distance Y-axis: 1,785 mm, travel distance Z-axis: 280 mm, overall weight: 5,500 kg, feed rate X-axis: 8 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 3 m/min, spindle motor power: 8,000 W, Equipment: documentation/manual, The machine worked until the end in Sweden at the moment it is undergoing a service inspection. It has two milling units Bsdpfxouzmyrj Aa Isdh

Year of construction: 2013, condition: used, Designation: Plant Growth Chamber Manufacturer: Weiss Technik / Vötsch Model: SGC120 Usable Volume: nominal 1,200 liters Interior Dimensions: 1310 x 675 x 1410 mm (W/D/H) External Dimensions: 1440 x 810 x 1975 mm (W/D/H) The Fitotron SGC 120 from Weiss Technik is a highly flexible plant growth chamber designed specifically for Arabidopsis cultivation, insect incubation, and tissue culture. It offers maximum usable area with minimal space requirements. Climatic conditions: Temperature range: Precisely controllable for day and night cycles via a color touch panel. Humidity: Optional humidification up to 80% relative humidity (RH) possible. Dehumidification: For seed storage, the system can reduce humidity to as low as 15% RH at 4°C. Usable Volume: The chamber has a nominal volume of approx. 1,200 liters. Maximum Growth Height: Without shelves, the maximum growth height is up to 1,275 mm (depending on the specific LED or lamp configuration). Bdsdpfjyu Svlsx Aa Ish Footprint: With a depth of just 810 mm, the unit fits through standard laboratory doors and requires only minimal floor space. Item condition: Used item as shown in the pictures. Please contact us if you have any questions.

Condition: used, Year of construction: 2022, Conveyor system/belt conveyor system, trio technik, manufactured in 2022. Bodpszl N Nvefx Aa Iedh

Condition: used, Limit switches, buttons, safety switches, position switches -Activation radius: adjustable -Minimum operating radius: 35 mm Bsdjdnn H Depfx Aa Iedh -Number: 7 pieces -Price: complete

Condition: used, Year of construction: 1992, tube diameter 48 mm bending radius max. 90 ° total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1,8 x 0,8 x 1,2 m Electro-hydraulic mandrel tube bending machine with - four-position bending angle pre-selection Bedpsz Dkyqefx Aa Iodh - bending tools: 48.3; 42.4; 33.7; 1/2" - mandrel length: 4500 mm