Used Telemecanique Contactor for sale (246)

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Manufacturer: Moeller, Schütz power contactor -Type: DIL2AM-G -Number: 2x contactors available -Price: per piece Rjdpfx Ajkia S Tefnot -Dimensions: 105/70/H165 mm -Weight: 1.8 kg/piece

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: DIL ER-31 Rsdpfx Afsb A I Eajnjt -Price: per piece -Number: 8 available -Weight: 0.2 kg/piece

Condition: good (used), Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor -Manufacturer: AEG Rsdpod Dpi Sofx Afnet -Type: LS 8/L14 TKS -Application: DC operated -Quantity: 1 piece available -Price: per piece -Weight: 0.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -110 V 60 Hz -SK: 4120116 Rsdpfx Asb A Nztofnet -Quantity: 14 pieces available -Price: per piece -Weight: 0.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor -Type: 3TH42 80-0BB4 -Price: per piece -Quantity: 1 available Redpfob A I Dgex Afnst -Weight: 0.7 kg/piece

Condition: used, Contactor, semiconductor contactor, contactor, power contactor -Maximum: 22 kW 660 V -Price: per piece -Number: 8x available -Dimensions: 135/85/H115 mm -Weight: 6.5 kg Rodpfx Afedngwfjnjt

Condition: used, Safety contactor, contactor, semiconductor contactor, contactor, safety relay, safety switching device Redpfx Afsgag Alenot -Manufacturer: Siemens, Sirius safety relays -Type: 3TK2826-1BB42 -Voltage: 24 V DC -Dimensions: 120/45/H105 mm -Weight: 0.3 kg

Condition: used, Contactor, semiconductor contactor, contactor -Power: 37 kW Rjdpfjdngwgex Afnst -Volt: 230 V. -Frequency: 50 Hz -Number: ´2x available -Price: per piece -Dimensions: 135/100/H142 mm -Weight: 3.5 kg

Condition: used, Contactor, semiconductor contactor, contactor, power contactor -Type: 3RT1035-1BB40 -Auxiliary contact type: 3RH1921-1FA22 -Max. Power: 18.5 kW/400 V/AC-3 -Number: 1x contactors available -Price: per piece Rjdpfjb Nkupox Afnet -Weight: 1.5 kg/piece

Condition: used, Contactor, semiconductor contactor, contactor, power contactor, auxiliary contactor Rodpofifk Dsfx Afnjt -Siemens: Type 3RT2027-1CL24-3MAO -Dimensions: 90/50/H145 mm -Weight: 0.5 kg

Condition: used, Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor Rodpfxjd Dpi Ns Afnot -Manufacturer: AEG -Type: SH10G.64 -Number: 3 pieces available -Price: per piece -Weight: 0.8 kg/pc.

Condition: ready for operation (used), Num Telemecanique display unit 1060 / 205202101 control panel SN:1470 with Nokia 44BE 14" monitor, used, normal signs of wear, 100% functional, delivery scope as per photos. Rjdpfx Aex Et Sdjfnjt

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,100 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, year of last overhaul: 2024, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the turbulator replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Rjdpfx Afeu Thhrjnjt Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Redevf E Avopfx Afnjt Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2000, operating hours: 32,169 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 750 kg, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology, baling press (partially refurbished and tested) and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Redpfsviwdmjx Afnet Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 2 wire stations with deflection rollers for 10 wire reel stands (without wire) The following repair and overhaul work was carried out: Hydraulic oil tank emptied, cleaned and refilled with new oil Oil filter and air filter replaced Hydraulic block partially resealed Hydraulic hose on hydraulic block replaced Wire entry marks on the floor passages welded shut and smoothed Tying unit cleaned, serviced Electrical system repaired, door flap contact switch partially replaced Whirbulator repaired General maintenance work carried out, lubricated Machine tested during operation, without the use of materials, in manual mode and in automatic mode, see function video Comments: The system has already been completely dismantled, stored and is available for loading at short notice. The documentation (BA, CE, electrical/hydraulic circuit diagram) is available. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. Redpfx Ajh U Rzgsfnst LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: good (used), Year of construction: 2009, lifting height: 6,100 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 1.810 kg Functional Lifting capacity: 360 kg Working height: 810 cm CE mark: yes Rodpfx Afjv Tib Ssnjt Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 2,21x0,71x1,72 Production country: JP Additional information Please contact Christian Theißen for more information Manufacturer: Aichi Model: SV06CNL Year of build: 2009 Condition: Used Data: Max. working height: 8,10 m Max. platform height: 6,10 m Drive type: Battery Platform dimensions LxW: 2,21 x 0,71 m Length of the platform extension: 1,00 m Lifting capacity: 360 kg Lifting capacity on extension: 120 kg Total dimensions LxW: 2,30 x 0,80 m Height transport position with railing: 2,125 m Height transport position without railing: 1,715 m Max. Wheel load: 800 kg Gradeability: 25% Max. permissible longitudinal tilt angle: 3° Max. permissible cross slope angle: 1,5° Empty weight: 1.810 kg Special features: weiße Reifen, Anschlagpunkte für Rückhaltsysteme(PSA) vorhanden, nur Inneneinsatz Information: 3057 + 3058 Electrical problem, 3078 Emergency stop contactor missing. Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2001, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Albright/Elektron, relay contactor -Type: SW201-3 -Voltage: 48 V Rjdpfxoy At Rus Afnet -Number: 5x contactors available -Price: per piece -Dimensions: 155/75/H80 mm -Weight: 1.5 kg/pc.

Condition: good (used), Year of construction: 2001, Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Albright, relay contactor -Type: SW180B-3 -Voltage: 24 V -Number: 9x contactors available -Price: per piece -Dimensions: 122/60/H45 mm -Weight: 0.7 kg/pc. Rjdpoy Aty Ajfx Afnot

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,797 h, clamping force: 800 kN, screw diameter: 40 mm, total width: 2,042 mm, total height: 1,711 mm, overall weight: 8,200 kg, product length (max.): 4,545 mm, This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Additional information inclusive Wittmann Primus 16T robotTravel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm5 kg payloadControl system: Wittmann CNC8, Primus R8.3 softwareR8 Teachbox TouchVacuum circuit with additional 5/2-way valve • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm Rodpfx Aox D Rlpofnot • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS presentExtrasSocket box 1:X2510, Cekon, 16A /400V, 3P-N-PE via HSX2511, Cekon, 16A /400V, 3P-N-PE via HSX2512, Cekon, 16A /400V, 3P-N-PE via HSX2513, Cekon, 16A /400V, 3P-N-PE via socket contactor(Function 0060)Sockets for colour dispenser:1X2507 / 1W7145, Schuko 10A / 230V, 1P-N-PE, via HSplus 1X9507 / 1W9507, Schuko 10A / 230V, 1P-N-PE, via HSMount sockets and base housings on bracket 110.180.6902(Function 0060)1X3123, Zone 12 HAN 4A screw-in, power only1X9123, Zone 12 HAN 4A screw-in, sensor only(Function 0110)Pneumatics 1, 1x3/2WV 890L, mounted on DAP, W2008(Function 0470)Pneumatics 9, 1x3/2WV 890L, mounted on BAP, W2016(Function 0470)Cooling water 1:X4051 W9088 Flow measurement B1135 - B1138 (return),Pressure measurement B1211 (flow)X4060 W9260 HAN16E Temperature measurementB0801 (flow), B0832 (return)(Function 0490)Cooling water 2:X4050 W9086 Flow measurement B1147 - B1150 (return),Pressure measurement B1212 (flow)X4059 W9259 HAN16E Temperature measurementB08813 (Flow), B0814 (Return)(Function 0490)Dosing 1C:1x suction conveyor and 1x paint dosing1X2018/1W7146, HAN 4A for paint dosing1X9191/1W9946, HAN 3A for suction conveyormount sockets and base housings on holder 110.180.6902(Function 0550)

Condition: good (used), Contactor, semiconductor contactor, contactor -600 VAC 55 A Quantity: 1 piece available -Weight: 1.8 kg Redpeva Rquefx Afnst

Condition: used, Year of construction: 2003, 1 used very good condition universal milling machine with 3-axis digital display FAGOR, stepless feed and top support drive Make: ARSENAL, Bulgaria Model: FUV 321 M year of manufacture: 2003 Technical data: Spindles: Spindle mounting vertical + horizontal ISO 50 Speed range, vertical, infinitely variable 30 - 2000 rpm Speed range, horizontal, infinitely variable 30- 2000 rpm Table: Table clamping surface 1350 x 320 mm X-axis, manual / mechanical 1100 / 1080 mm Y-axis, manual / mechanical 360 / 340 mm Z-axis, manual / mechanical 460 / 440 mm Upper arm adjustment approx. 600 mm table tiltable ± 45 max. distance table surface to horizontal spindle center 490 mm max. distance table surface to vertical spindle nose 630 mm table adjustment: feeds lengthwise and crosswise, infinitely variable 12.5 - 630 mm/min ditto vertical, infinitely variable 5 - 262 mm/min rapid traverse longitudinal and transverse 2,5 m/min ditto vertical 1,04 m/min Drive Redpobpmurofx Afnst drive power 7,5 kW Dimensions and weight Dimensions L x W x H 2000 x 2500 x 2050 mm Weight 3200 kg Accessories / Special features: - 3-axis digital display make FAGOR model NV 300 M - Universal milling head system "HURON" manually adjustable over 2 levels - Stepless feed via joystick and potentiometer in all 3 axes - Stepless speed for vertical + horizontal via potentiometer with 2 servo drives make TELEMECANIQUE model Altivar 28 - Stepless feed and stepless speed with digital display in each case - Upper arm with motor drive of the universal milling head - E [...]

Condition: new, Shaft diameter: 120roll diameter: 390motor power: 15length: 2000width: 1650heigth: 1900weight approx.: 4450 Standard Equipment • Steel construction frame • 3 rolls powered by hydromotor and planetary gearbox • Horizontal and vertical working position • Mobile control panel • Hardened standard rolls • Hardened and ground shafts made of high-tensile special steel • Digital read-outs (2 pcs) • 3-axis hydraulic lateral angle guide rolls • Two-speed working system • Hydraulic elements: Duplomatic (Italy) components used • Electrical equipment: Siemens (Germany) or Telemecanique (France) • Built according to EC safety directives (CE mark) and ISO 9000 certificate • User’s manual in English Options: - NC Unit 7 Screen EURO 7.500,-- Capacity Chart: NoProfile TypeSize Max Min. es1125x25 1200 Standard Rolls2200x50 1000 Standard Rolls365x65 750 Standard Rolls4Ø80 850 Optional Rolls5Ø5”x6,35 1500 Optional Rolls6Ø160x4 2800 Optional Rolls7120x40x4 1800 Optional Rolls890x5 1800 Optional Rolls9120x120x12 1200 Optional Rolls 10100x100x10 1200 Optional Rolls 11100x11 800 Standard Rolls12100x11 1000 Standard Rolls13100x11 800 Optional Rolls14UPN 220 1000Standard Rolls*15UPN 220 1200 Standard Rolls*16IPN 220 1000 Standard Rolls *17HEB 120HEA 14012001200Standard Rolls *18UPN 120 10000 Optional Rolls 19IPN 160 Redpfxey Hymqj Afnst 5000 Optional Rolls 20HEB 100HEA 12016004000Optional Rolls

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1977, Tower crane 32/K/45 Crane with max jib of 30 m Lifting capacity from 1,000 to 4,700 kg Counterweight (concrete) 16,000 kg The slewing motor, hydraulic pump, cylinder seals, hoses, ropes, and contactors have been replaced on the crane. Spare parts list and operating manual available. Rsdoyy Rmnjpfx Afnjt With remote control.

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 220 kg, total length: 610 mm, total height: 2,000 mm, total width: 805 mm, input voltage: 400 V, control cabinet height: 2,000 mm, control cabinet length: 610 mm, control cabinet width: 805 mm, input frequency: 50 Hz, control voltage: 230 V, protection type (IP code): IP20, We are offering this used Eskap ESR-7000 (-S485) power factor correction system, 100 kvar, year of manufacture 2022. Ready-to-connect, regulated power factor correction system for the automatic compensation of reactive power, ESKAP modular design in accordance with IEC / DIN EN 61439-1 and -2, IEC / DIN EN 60831-1 and -2 and DIN EN 61921. Rated voltage: 230 / 400 Volts, 50 Hz Rated power: 100 kvar, step power: 25 kvar Configuration: 2 x 25 – 50 kvar, expandable in the same cabinet up to max. 200 kvar Modules spaced approx. 100 mm apart Contactors with pre-charging resistors for damping inrush current peaks Group protection with NH fuse-switch disconnectors MKP three-phase capacitors with discharge resistors, UN = 525 Volt Redpjyiryyefx Afnot 7% detuned to protect against ripple control frequencies > 228 Hz Reactors with high linearity, temperature monitoring Temperature class T40/B, insulation class F 12-step four-quadrant controller with self-adaptation Ventilation via ball-bearing roof fans Permissible ambient temperature: -10°C to +35°C (24h average), +40°C (short-term max) ESKAP floor-standing cabinet, dimensions 2000 x 805 x 610 mm (H x W x D) Protection class 1, IP20, color: RAL 7035 Cable entry from below, door hinge right, weight approx. 220 kg If you have any questions or need further information, please feel free to send us a message or call us.