Used Telemecanique Contactor for sale (275)

Condition: good (used), Circuit breakers, motor protection switches, circuit breakers, circuit breakers, low-voltage networks, circuit breakers for transformer, generator and system protection, load break switches, disconnectors -Manufacturer: Telemecanique, motor protection switch unused -Type: GV2 ME10 / 4-6.3A -Undervoltage release: Schneider GVAX385 Hnedpfxsw S Tq So Abkou -Dimensions: 145/90/H85 mm -Weight: 0.7 kg

Condition: new, Telemecanique TSX L PL7 3 V42 software, unused in original packaging, 100% functional, scope of delivery as per photos Hnodpfoz Ac Tiex Abkju

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. Hnjdpfxjtywzqo Abkou 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: excellent (used), Protective control unit Polu Box Hodpfx Aef Ey Edobkjnu Manufacturer: DEMAG Includes documentation

Condition: used, Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, Namur sensor -Manufacturer: Telemecanique, Inductive Proximity Switch Ovp Hnodeuza Tfspfx Abkju -Type: XS4P30MB230B -Number: 2x sensor available -Price: per piece -Dimensions box: 150/80/H45 mm -Weight: 0.1 kg/piece

Condition: like new (used), The Telemecanique XMG pressure regulator is used to regulate pressure in pneumatic systems. It is suitable for use on machines and equipment in the woodworking industry or similar applications. Hodpjzzlh Tofx Abkjnu Technical data: - On request

Condition: used, Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, Namur sensor -Manufacturer: Telemecanique, Inductive Proximity Switch Ovp -Type: XS4P12MA230 -Number: 1x sensor available -Dimensions box: 150/80/H45 mm Hodpfx Abouza Tljksnu -Weight: 0.1 kg

Condition: used, Inductive sensor, electronic sensor, proximity switch, proximity sensor, proximity transmitter -Manufacturer: Telemecanique, Inductive Sensor Proximity Switch unused Ovp -Type: XS4P18PA340D -Number: 1x sensor available -Dimensions box: 80/50/H45 mm Hnedpfx Ajuzn H Hsbksu -Weight: 0.1 kg.

Condition: like new (used), Year of construction: 2010, MAKE-UP AND EXHAUST AIR SYSTEM for PAINTING and DRYING BOOTH Air flow rate: 10,000 m³/h -SUPPLY AIR UNIT Type ZLG III including duct components in galvanized design Technical data: Manufacturer: LBH Type: ZLG III Air volume: 10,000 m³/h Motor power: 3.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,435 min⁻¹ Motor design: B 3 Total pressure differential: 450 Pa Heating coil: Cu / Al Tube rows: 3 pieces Heating capacity: 124 kW Heating medium: 80 / 60 °C water Air inlet temperature: -15 °C Air outlet temperature: +22 °C Filter area: 14.44 m² Water-side resistance: 550 mm WG Circulation rate: 5,345 l/h Water connections supply/return: DN 32 Sound pressure level at 3 m distance from the unit: 62 dB(A) Sound pressure level at 3 m distance from the intake point: 55 dB(A) -DRY SPRAY WALL 4 x 1 m with PAPER and AFTERFILTER UNIT and guide vanes Technical data: W x H x D = 4,000 x 1,000 x 400 mm -FLOOR SUCTION DUCT for drying area Technical data: Suction diameter: 220 mm Cross-section: 250 x 250 mm Length: approx. 6,000 mm -EXHAUST AIR COMPONENTS Technical data: Manufacturer: LBH Sound pressure level measured at 3 m distance from the exhaust air deflector hood: 58 dB(A) -EXHAUST AIR FAN TYPE VGM-071-0450-K / 4.0 kW Technical data: Hnjdpfszlktpsx Abkju Manufacturer: LBH Type: VGM-071-0450-K Air volume: 10,000 m³/h Motor power: 4.0 kW Operating voltage: 230 / 400 V Frequency: 50 Hz Speed: 1,500 min⁻¹ Motor design: B 3 Total pressure differential: 1,000 Pa Housing position: GR 90° Sound pressure level at 3 m distance: 68 dB(A) -SWITCH AND CONTROL CABINET Make-up and exhaust air system for PAINTING and DRYING BOOTH (including frequency converter) Switchboard for controlling all units, as well as for monitoring and regulating the frost protection limit, the supply air temperature, including frost protection sensor and supply air sensor The following functions are located on the front door of the switchboard: - Main switch to switch on the entire system - Emergency stop button to lock the entire system - On/off button to activate the control system - Selector switch for switching between manual and automatic operation of the heating pump - Operating indicators (green) and fault indicators (red) for supply and exhaust air fans - Release button to start the system in the event of possible malfunctions (frost protection louver), as well as a fault indicator lamp. The technology: in the switchboard includes: - Frequency converter for supply and exhaust air motors - Motor protection switch for all motors, if required, with the corresponding contactors, - PLC control, - Connection terminals for all external control devices such as frost protection sensor, supply air sensor, mixing valve, ... - an external fault output. -MOTOR-OPERATED THREE-WAY VALVE with geared actuator RUNNING TIME SAVER SWITCH incl. MOUNTING PLATE in explosion-proof design (ATEX design) The running time saver switch is used to automatically start and switch off the make-up and exhaust air system after completion of the spraying process, or to switch between spraying and drying mode. The painting system was used in a training workshop and is in absolutely new condition. New price of the system: 36,800 EUR (2010) The system has already been dismantled and is stored in warehouse 2281 Raasdorf Price: 15,000 EUR

Year of construction: 2019, condition: excellent (used), The Compact Series The new Wanner shredding mills in the C’s series (“C” stands for “compact,” “s” stands for “silent,” i.e., optimized for noise reduction) offer practical solutions for almost all challenges in the in-line recycling of sprues and defective parts in the production process. Thanks to the modular design, the shredding mills in the C’s series can be easily adapted to the specific application or the needs of the operation. Hnodjzc Nydspfx Abksu Depending on the method of feeding the sprues, the disposal of the ground material, or the injection molding machine used, the C’s series from Wanner offers optimal solutions that can be adapted to your specific operating processes through a variety of standard components. The optimized cutting geometry and the low rotor speed guarantee high-quality ground material with a low dust content. Sound-insulated feed hoppers and the grinding chamber design, which is optimized in terms of structure-borne noise and natural frequency, contribute to a low noise level. The large-sized gearbox ensures a long service life for the shredding mills and also allows for extremely compact dimensions. The grinding chamber can be opened very easily with just a few steps, which saves time and thus costs, for example, during cleaning due to a color or material change. The advantages of the C’s series: easy adaptation to the specific application through a modular system compact design requires only a small footprint next to the injection molding machine robust, cast/steel housing that can be moved on swivel casters durable motor/gearbox unit for a long service life significantly reduced noise level thanks to a bevel-cutting rotor and a vibration-optimized grinding chamber design easy handling and simple cleaning the mill saves time and costs improved feed behavior of bulky sprues and ground parts due to optimal rotor geometry grinding chamber with hardened inserts for minimal wear with glass fiber reinforced materials high-quality and low-dust ground material thanks to the optimized cutting geometry. The rotating disc in the side wall reduces friction and thus heating and damage to the ground material. blades can be easily resharpened without a special device sound-insulated and tamper-proof feed hoppers Technical data Manufacturer: Wanner Type: C17.26sv Grinding chamber opening: 170 x 260 mm² Rotor diameter: 170 mm Rotor blades: 12 Stator blades: 2 Throughput: 20-25 kg/h Screen aperture: 3-8 mm Voltage: 400 volts/50 Hz Extraction container: volume approx. 6 l Suitable for glass fiber reinforced materials as standard Control: Contactor control with overload protection switch electrically redundant system with self-monitoring safety relay acc. to EN 12012 5 m connection cable Weight: 155 kg Year of manufacture: 04/2019 Product video "We offer everything from a single source: We would be happy to offer you a suitable bank financing for your project." You can find more articles - new and used - in our shop! International shipping costs on request!

Condition: used, Inductive sensor, electronic sensor, safety switch, inductive proximity switch, proximity sensor, Namur sensor -Manufacturer: Telemecanique, Inductive proximity switch -Type: XS4P30PA370B -Number: 6x sensor available -Price: per piece Hodpfxeuypyxo Abkenu -Dimensions: Ø 30 x 116 mm -Weight: 0.1 kg/piece

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Hodpfxsz I Ub He Abkonu Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: used, Frequency converter, frequency converter, drive inverter, controller, variable speed drive, converter, inverter -Manufacturer: Telemecanique, variable speed drive frequency converter -Type: ATV11HU09M2E -Power: 0.37 kW -Input: 200/240V - 50/60Hz -Output: 3 Ph: 200/230 V -Frequency: 0.5-200Hz Hnedpfeq Untkex Abksu -Dimension: 145/70/H120 mm -Weight: 0.8 kg

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Hnedpfx Aezcxbwebkju Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Condition: new, SIEMENS contactor 1st type - 3 TF 46 - 3 pieces 2nd type - 3 TF 48 - 1 piece 3rd type - 3 TF 54 - 1 piece 4th type - 3 RT 1054 - 1 piece 5. type - 3 RT 1075 - piece 6. LC 1D 65008 - 1 piece Hsdpfx Abou U Ulgskenu

Condition: used, Year of construction: 1976, Working width 1350 mm Number of sanding units x st. Used Machine Year of Manufacture: 1976 Features and Technical Specifications: - Grinds from below - Material feed via rubber rollers - Non-contact oscillation control - Quick-change pressure bar - Electric adjustment of tool thickness with an easy-to-read digital display - Pushbutton with contactor control - Grinding width: 1350 mm - Workpiece thickness: max. 150 mm - Grinding belt width: 1360 mm - Grinding belt length: 1900 mm - Roller feed speed switchable between 10 and 20 m/min Hnsdezk Nyrjpfx Abksu - Compressed air connection: 6 bar - Air consumption: approx. 180 NL/min Motor power: 17.5 kW Dimensions: 1800 x 1100 x 1520 mm Weight: 2600 kg Availability: Immediate Location: Röllbach

Year of construction: 2006, operating hours: 12,169 h, condition: ready for operation (used), overall weight: 1,400 kg, Rotary table wheel blast machine manufactured in 2006. This C.M. T-10 features a turntable diameter of 1,000 mm and a usable height in the workspace of 450 mm. It has a maximum permissible table load of 900 kg and operates with a blast wheel power of 5.5 kW. If you are looking to get high-quality blasting capabilities, consider the C.M. T-10 machine we have for sale. Contact us for further details. Hnsdpfx Aboz Ha Enokeu - Mains Voltage: 400 V- Number of Phases: 3 Ph / 3+PE- Frequency: 50 Hz- Operating Load (Power): 4.741 kW- Operating Load (Current): 10.02 A- Short Circuit Protection / Interrupting Capacity: 30 kA- Max. Motor Current: 7.90 A- Blast Wheel Power: 5.5 kW- Turntable Diameter: 1,000 mm- Usable Height in Workspace: 450 mm- Max. Permissible Table Load: 900 kg- Control Unit / HMI: ESA VT50- Safety Interlock Switch: Telemecanique XC2SE7311 / XC2SE- Included Equipment / Scope of Delivery: All required cables and hoses for direct commissioning, screw holders for angular positioning of workpieces inside the blasting chamber

Condition: used, functionality: fully functional, machine/vehicle number: 1232, Jumberca SFJ single-face circular knitting machine, machine number 1232. Manufactured in Spain by Jumberca S.A. (Badalona, Barcelona). NAMEPLATE DATA: · Diameter: 30 inches / 762 mm · Gauge: 20 · Number of needles: 1920 · Manufacturer: Jumberca S.A., Badalona, Spain APPLICATION: Single-face knitted fabrics: jersey, pique, and derivatives for outerwear, sportswear, and underwear. Hedpfx Abjzvh D Hokonu EQUIPMENT INSTALLED: · Memminger-IRO type TPF 20-G feeders with yarn stop · Memminger-IRO Pulsonic 3-Mini lubricator · Hengstler counters · Complete upper cam set · Electrical panel with LOYJE 13.220 contactors and transformers · Drive system with pulleys and mechanical variable speed drive CONDITION: Complete machine, fully assembled. An on-site inspection and operational test can be arranged. DIMENSIONS AND TRANSPORT: · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · No disassembly required · Location: Albacete, Spain

Condition: used, Year of construction: 1996, Pallet dimensions 1 (wood): 1200x800mm, pallet dimensions 2 (wood): 1000x1000mm, packaging type: paper bags, max. throughput capacity: 400bags/h, support frame height (including support frame): 2000mm, installed power: 15kW, average power consumption: 9kW, mains voltage: 380V/50Hz, air consumption: 100Nl/min (dry and filtered), air pressure: 6kg/cm², motor protection rating: IP54, electrical protection rating: IP54, equipment: SEW gear motors, SEW self-braking motors, Herion solenoid valves, Herion pneumatic cylinders, Siemens electrical power components, Siemens contactors, Siemens push buttons, Siemens S5 PLC, Soprel frequency inverter, Klöckner safety limit switches, IFM proximity sensors, IFM photoelectric sensors, permanently lubricated rollers, waterproof, with documentation. An on-site inspection is possible. Hedpfxsz S Iv Ts Abkenu

Condition: good (used), Heraeus Vötsch HC 4055 Temperature Testing Chamber Manufacturer: Heraeus Vötsch Type: HC 44055 Temperature chamber Temperature range: +180°C Rated voltage: 380V, +/-10%, 3/N, 50Hz Rated current: 13.5 A Rated power: 9 kW Housing dimensions: W 1065 x D 1560 x H 1890 (mm) Observation window: Width x Height 350 x 640 mm Test chamber: (L x D x H) approx. 800 x 795 x 855 mm Test chamber volume: 550 l Chamber is air-cooled Caution: Chamber can only be operated as an oven. Refrigeration circuit is empty and deactivated. Climate control system is deactivated. Disconnected contactors: 03K2 Compressor 03K5 Condenser fan 15K6 Panel heater Semiconductor relay 21V4 Humidifier. Hjdpjuuilvofx Abkonu Weight approx. 550 kg You can find more new and used items in our shop! International shipping costs upon request!

Condition: used, Crane remote control, radio receiver, receiver, crane radio remote control, radio control system -Manufacturer: Telemecanique, crane remote control with cable / portable crane control panel -Cable length: 23m Hnjdpfekrgifsx Abksu -Connector: 16 pin -Dimensions: 600/400/H340 mm -Weight: 13 kg

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0803024, functionality: fully functional, 4-SIDED PLANKER-MOULDER 5 REINFORCED MOTOR TOOL HOLDERS & 3.00 M CHROME TABLE Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No.: 0803024 Year: 2008 (Photos taken before servicing & cleaning) MAKING CAPACITIES: - 4-sided planer and moulder - Max. cross-section: 130 x 230 mm - Thicknesses: 10 to 130 mm - Widths: 15 to 230 mm - Minimum length for single workpiece: 600 mm > 760 mm with use of the universal spindle - Adjustable infeeds: max. 10 mm - Spindle speed: 6000 rpm PLANKER COMPOSITION: - Robust frame Welded machine shop - Secure, soundproof, and fully panoramic enclosure on gas struts with interior lighting - Digital counters (Siko type) for precise manual adjustments of each operation - Raised control panel and operator face - Cast steel infeed table (LxW): 2980 x 255 mm Table height from ground: 900 mm - Side infeed spring-loaded pusher - Digital pass-taking indicators 1) Planer spindle 7.5 kW Tool holders Ø125 x L.230 mm 2 & 3) Right & left vertical spindle 12 kW Tool holders Ø125 x L.130 mm 4) Upper horizontal spindle with independent adjustment 11 kW Tool holders Ø125 x L.230 mm - Adjustable pressure shoe at the output 5) 360° universal spindle 11 kW Spindle Ø 50 x L. 240 mm - Vertical idler wheel presser DRIVE: Hnodpfxev Tzw Eo Abkju - Feed with variable speed drive: 6 to 24 m/min Drive motor: 3 kW - Helical steel infeed roller in the table Cardan shaft drive - 7 pneumatic pressure rollers 2 notched steel rollers 3 (1 retractable) + 2 rubber-coated rollers - One smooth steel roller in the table at the planer outlet OTHER FEATURES: - Main power supply: 400V. Three-phase + T 50 Hz - Installed power: 53 kW (72 hp) IN 95.6 A - Automatic star-delta starting - Motors with brakes - Toothed belt drive - Electrical thickness adjustment by raising and lowering the beam. 0.37 kW motor - Shaft diameter: Ø50 mm - Minimum working air pressure: 6 bar - Suction: 5 x Ø 120 mm Recommended flow rate: 6100 m3/h Speed: 20 to 28 m/sec depending on the humidity of the wood being machined - CE marking - Padlockable contactor, mushroom stops Dimensions in operating order (W x H): 3000 x 2250 mm Dimensions: 5100 x 2000 x H 1810 mm Weight: 4300 kg Machine supplied with mounted sharpening irons, manual, spare parts list, and diagrams. Please contact us for consumables, accessories, and/or vacuum systems. Upon request, the machine will be serviced and brought into compliance, with inspection and dynamic functional testing. With a 3-month warranty and certificate of compliance. Ex-stock price excluding VAT. Delivery and additional services upon request.

Condition: excellent (used), Contactor, semiconductor contactor, contactor, power contactor, capacitor contactor, motor contactor -Manufacturer: Siemens, Contactor Power Contactor Original Packaging -Type: 3RT1065-6AP36 Hjdpfx Ajz Rwnijbkonu -Auxiliary switch: Type 3RH1921-1DA11 -Number: 2x contactors available -Price: per piece -Cardboard dimensions: 270/200/H240 mm -Weight: 6.6 kg/pc.

Condition: excellent (used), Contactor, semiconductor contactor, contactor -Condition: unused, original packaging -Power: max. 540 A 600 V AC -Quantity: 1 piece available Hnjdob A N A Nopfx Abkou -Dimensions: 260/250/H230 mm -Weight: 13 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: Hnodpfx Aboxvca Ajkju A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7