Used Snow & Co Ltd 8147 for sale (30,716)

Condition: new, müller co-ax 5-PCS-2 10 NC valve with external actuator 24V DC ,unused, 100% functional, scope of delivery according to photos Iedpfx Aaji Eb Tajgoat

Condition: used, Year of construction: 2006, This is an in-line Tub Filler for yoghurts and desserts for catering purposes. The filling volumes are 1-5 kg per tub. This machine was used for a high end customer with the ability of meeting all quality and health and safety standards. Capacity : 5000 kg per hour Sealing: Film roll with sealing and cutting device as well as roll to manage the excess material Stations: Tub dispenser > Filling > Sealing > Lid applicator > Date printing > outlet conveyor Protection: Fully enclosed cabin Condition: Good Available: Immediately Iasdpfx Aeynrzboagjt

Condition: used, DAF Plant Comprising of: - DAF plant white water system Chemical dosing Polymer mixing Air compressors and control system. Iasdpsy Au Arsfx Aaget Feed pumps and blower available if required. *Drawings available* Located in Bristol, UK (Buyer to remove)

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Iaedpfx Aeu Tg I Dsagot Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, power: 9.7 kW (13.19 HP), Technical data cardboard shredder: Manufacturer Presto GmbH & Co. KG Iaodpfxou Tha Io Aagst Type PZA Year of construction 2007 Throughput volume 130 m³/hour Speed 37/9 rpm Motor power 7,5 / 2,2 kW Electrical connection 32 A Dimensions shredder inside 1,490 x 1,320 x 530 mm (L x W x H) Dimensions shredder outside without cover 2,308 x 1,320 x 685 mm (l x w x h) Machine weight 0,45 tons Use of the systems: The PZA cardboard shredder was in use in a Dutch logistics centre to pre-shred loose, erected cardboard boxes from the returns department and then press them into bales. The cartons were fed manually onto the infeed conveyor and transported directly to the cardboard shredder by a sliding belt conveyor and shredded. The pre-shredded cardboard boxes were then transported over hundreds of metres to the baler where they were pressed. Scope of delivery: 1 piece Presto cardboard shredder (2-shaft shredder) type PZA Comments: The cardboard shredder was an elementary part of the disposal line and therefore good maintained to ensure high availability of the returns department. The machine is in good condition and ready for immediate use. The price is per piece exw. our warehouse in Siddeburen, the Netherlands. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2010, operating hours: 3,641 h, functionality: fully functional, pressing force: 36 t, filling opening width: 1,100 mm, filling opening length: 1,080 mm, bale width: 1,100 mm, bale height: 750 mm, power: 15 kW (20.39 HP), volume flow: 90 m³/h, Technical data baler: Manufacturer Presto GmbH & Co. KG Typ CC 36 M Year of construction 2010 Hours of operation 3,641 h Press power main press 36 t Specific press capacity 467 N/cm² Feed channel 1.080 x 1100 mm (l x w) Cycle time 34 sec. Capacity per cycle time 0,85 m³ Theoretic throughput rate 90 m³/h Throughput rate under operating conditions with a material bulk density of 35 kg/m³ approx. 51 m³/hour Bale size 1100 x 750 mm (w x h), length variable Driving motor 15 kW Tying 4-fold vertical, semi-automatic, with polyester synthetic yarn Throughput rate at a bulk weight of 35 kg/cbm 1,8 to/h bulk weight of 60 kg/cbm 2,5 to/h bulk weight of 100 kg/cbm 3,1 to/h Transport dimensions only baler 4.200 x 1.640 x 2.200 mm Machine weight baler approx. 4 to Iedpfx Aeu Thh Eeageat Comments: The press was checked for function in our workshop, then stored and is therefore available at short notice. The machine documentation (operating instructions, CE, electrical and hydraulic circuit diagram) is available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, machine/vehicle number: 345117, Magic-Skin 5035EV semi-automatic skin packaging machine. Board size 495mm x 345mm. Maximum product height 100mm. Timers control dwell time, heating time and vacuum time, incorporates self contained vacuum pump. Fitted with infeed/discharge tables and supplied free-standing with 4 castors 2 locking castors. (Paint colour blue) Isdpfoywu Hgjx Aagsat Power requirement: 230V, single phase 3 pin blue 16 amp Overall dimensions (lxwxh) 1810x965x1450mm

Condition: good (used), Fully automatic horizontal stretch wrapper, orbital wrapper, Bang BC-40 CA – used - : Price ex location: only €5,950 (net)! Manufacturer: Bang & Co Model: BC-40 CA Isdpfx Aaoy Ru Nusgsat Year of manufacture: The BC-40 CA is a fully automatic horizontal stretch wrapper for bundling and spiral wrapping products that need to be secured on a corrugated cardboard sheet. After activating the foot switch, the machine automatically centers the sheet placed on the infeed conveyor and transfers it to the rotating ring. The size of the sheet is automatically detected and assigned to one of ten selectable wrapping programs. The transport and ring rotation speeds are adjustable and are controlled via frequency inverters. The product is automatically fixed onto the sheet by the machine, and a clamping and cutting system attaches and trims the film at the beginning and end of the wrapping cycle. The machine features a quick-change system for easy film roll replacement. - Max. roll diameter: 150 mm - Film width: 70-125 mm - Core diameter: 38 mm - Film thickness: 15-35 µ - Ring rotation speed: 30-140 rpm - Power supply: 220/240 V – 50/60 Hz, 1 phase - Machine weight: 320 kg - Machine start: foot switch - Infeed/outfeed conveyor length: 1500 / 500 mm - Compressed air consumption: 0.75 l/m³ NL/min - Compressed air: 6 bar - Compressed air consumption per cycle: 0.15 Condition: good Availability: immediately Location: Warehouse Frankenberg / Saxony

Condition: new, Year of construction: 2026, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) Isdpfx Aaow Ivqmsgeat each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: new, Year of construction: 2026, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 10,000 mm, inner dimension height: 5,000 mm, filter area: 250 m², volume flow: 16 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Warranty up to 5 years on various components. Iodpfju Ey Dlox Aagoat 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2026, Blast house components. Flat conveyor floor, cross conveyor screw, bucket elevator, air sifting, sieve, blasting medium hopper, blasting unit, filter system, fan, air ducts, lamella suction wall, blow box, electrical control as a kit without assembly. Alternatively, the plant components can also be assembled by our specialist fitters on your premises. Isdpfx Aaehc T Nlegsat

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: System-S/N: H 01 07 000-1 / Motor-S/N: 0141708310002, overall weight: 1,200 kg, The Pregler hydraulic power unit is a reliable and high-performance solution for supplying hydraulic systems in a wide range of industrial applications. It combines high-quality components in a robust housing to ensure stable pressure supply and efficient operation. The unit is versatile and can be easily integrated into existing installations, while its durable construction ensures long service life. Iodpfx Aewtgwieagsat

Condition: used, Year of construction: 2016, Used Filling Monoblock MITSUBISHI up to 39000 BPH Iaodpfxjvgvlke Aagot It is extremely important to note that this machine is complementary to it’s rinsing machine: (click here). The Filling Monoblock Mitsubishi offers an advanced solution in the bottling sector. Specifically designed to handle a wide range of liquids, it boasts a capacity of up to 39,000 BPH. Technical Specifications of Model FHRJ80M Mitsubishi Heavy Industries Mechatronics Systems Ltd manufactured the FHRJ80M model in 2016 to meet the growing demands for speed and precision in bottling. Equipped with 80 valves, this weight-based filling system accurately doses products, significantly minimizing waste. Moreover, the system fills aluminum bottles in various sizes ranging from 0.29L to 0.41L. Thus, it showcases its versatility for handling different types of liquids such as coffee (last product that has been filled by this monoblock), liquid soap, oil, and spirits. Bottling and Capping Features Furthermore, the Mitsubishi FHRJ80M monoblock integrates a capping function with 24 heads, accommodating aluminum screw caps of 28 mm and 38 mm. Its clockwise rotation direction eases integration into existing production lines. Additionally, the precision in cap placement and swift execution ensure the process’s efficiency, which is crucial for preserving product integrity and container safety during transport and storage. Storage and Maintenance Currently stored in a warehouse, the Filling Monoblock Mitsubishi remains in excellent condition to ensure its functionality and readiness. Also, the availability of instruction manuals aids in maintenance and repair operations, which are essential for extending the machine’s lifespan and maintaining optimal performance. Integrated safety features protect operators and the machinery, thereby reducing accident risks during operation. Conclusions of the Filling Monoblock Mitsubishi Finally, the used Mitsubishi FHRJ80M filling monoblock serves as an optimal solution for those seeking efficiency and reliability in the bottling industry. Its adaptability to various formats and product types, along with the precision of its filling and capping system, make it ideal for a broad range of industrial applications. With proper maintenance and careful management, this monoblock can deliver high performance, significantly enhancing production process optimization. This model not only meets but also exceeds industry expectations in terms of functionality and performance.

Condition: used, Year of construction: 2016, Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph It is extremely important to note that this machine is complementary to it’s filling monoblock: (click here). Introduction to the Used Rinsing Machine MITSUBISHI This rinsing machine serves as an advanced solution for the bottling industry. Specifically, Mitsubishi Heavy Industries Mechatronics Systems Ltd. manufactures this 2016 model RNR100H machine to ensure effective cleaning of aluminum bottles. Consequently, it addresses the critical need for efficient and reliable rinsing processes in high-demand production environments. Operational Capacity and Speed The RNR100H operates at an impressive capacity of 39,000 bottles per hour, making it ideal for high-speed production lines. Additionally, the machine handles aluminum bottles in various formats, including 0.29L, 0.3L, 0.31L, 0.4L, and 0.41L, thereby adapting to specific production needs. Moreover, the grippers rotate clockwise, which optimizes workflow and significantly enhances the rinsing process’s efficiency. As a result, manufacturers can achieve higher throughput without compromising on quality. Gripper System and Double Treatment Furthermore, the  Rinsing Machine MITSUBISHI  features 100 grippers, allowing it to treat numerous bottles simultaneously. This double treatment system involves two distinct phases: firstly, the machine uses water containing hypochlorous acid for effective disinfection. Subsequently, the second phase employs pure water to ensure the complete removal of chemical residues. Therefore, this dual-step approach guarantees thorough cleaning and minimizes the risk of contamination. Compatibility with Filling Machines A crucial technical aspect of the RNR100H lies in its compatibility with various filling machines. Specifically, the filling machines must have a corresponding height between 120 and 200 mm and a diameter between 50 and 80 mm. These parameters ensure optimal integration with existing production lines, thereby reducing adaptation times and enhancing operational continuity. Consequently, manufacturers can seamlessly incorporate the rinsing machine into their workflow without significant downtime. Mechanical Structure and Maintenance Moreover, the mechanical structure of the Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph guarantees durability and reliability. The machine’s components, made from high-quality materials, resist corrosion and wear, ensuring a long operational life even in intensive production environments. Additionally, the modular design facilitates preventive maintenance, allowing for the rapid replacement of worn parts. As a result, downtime is minimized, and maintenance costs are effectively controlled. Iaodpfx Ajvgvhxjagjt Energy Efficiency Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph From an energy perspective, the RNR100H optimizes energy usage to reduce consumption without compromising performance.

Condition: used, Year of construction: 1983, Additional title: lying tank in container Ijdpfx Aexbqrqsagjat Capacity: 32 hl Operating pressure: 2 bar Operating temperature: 20 °C Length: 4,65 m Width: 2,3 m Height: 1,95 m Weight: 2500 kg Features: Beer pump, thermometer, gas measurement, flow meter (Diessel), 2 cable drums, hose reel, safety valve, cleaning and filling connection, spray head, manometer, empty detection electrode Control cabinet, compressed air compressor (AltasCopco), pallet for 4 CO2 bottles, valves, pressure reducer

Year of construction: 2015, condition: used, Waste water neutralisation Capacity: 8 m3/h Operation / Control: Control cabinet with touch-screen display / WAGO Iodsxbqr Dspfx Aageat Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Condition: used, Year of construction: 1985, Beer drive transport tank built into trolley, with CIP spray head and manhole. Includes measuring system (max. flow: 120 l/min). Additional title: horizontal tank in container Iaodpfx Aaexbqhxjgjt Capacity: 7200 l Operating pressure: 2 bar Operating temperature: 20 °C Length: 7,25 m Width: 2,4 m Height: 2 m Features: control, pump, hose reel, flow meter, cable drum, fittings, CIP spray head, manhole

Condition: used, Year of construction: 1991, consisting of: -SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m2) - Forerun tank 1200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l expansion tank - Shell-and-tube heat exchanger - Compressed air reduction station -Control cabinet with operating panel Additional title: juice heating plant for pasteurization Capacity: 100 hl/h Perm. working overpressure: 16 bar test pressure 20,8 bar Wärmeaustauschfläche: 21 m2 Length: 5,6 m Width: 2 m Height: 2,4 m Operation / Control: Control cabinet with operating buttons Material: Stainless steel Base construction: Frame Features: 2 x vessels; plate heat exchanger; pipe heat exchanger; 2 x product pumps; process measuring and control technology. various valves and other fittings Iedpfx Aevcqy Ueagoat

Condition: good (used), machine/vehicle number: M4137-1280, functionality: fully functional, rotational speed (max.): 960 rpm, For sale is a Snow TA-3-S tapping machine. The item is in good condition. Two units available. Technical data: Manufacturer: Snow Manufacturing Iaedpfx Aajy Hihkegst Model: TA-3-S Serial number: M4137-1280 Motor power: 0.55 kW Speed: 960 rpm Voltage: 380 Volt Frequency/phase: 50 Hz / 3 phase Control voltage: 110 Volt Transport and loading can be organized Europe-wide for an additional fee, upon request. Prices are subject to VAT. Viewing by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Gjbn N Ay Dowza Dxogoil Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further info or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, For sale: Complete Equipment for Braided Cord Production Included Machines & Accessories: - 2 fully operational knitting machines for producing round cords (capable of simultaneously producing 6 cords) - Industrial yarn winding machine - 2 yarn stands for holding over 24 yarn cones Technical Specifications: Year of manufacture: 2020 Voltage: 380 V, 50 Hz Weight: 110 kg Machine Features Knitting Machines: - One machine is equipped with 4 needle heads, the other with 2 needle heads, enabling production of a total of 6 cords simultaneously. - Automatic stop function: If the yarn breaks or a needle is damaged, the affected needle head stops automatically. - Needle heads for cord production: 4 heads with 4 needles each—for fine knitted cords with approx. 3 mm diameter; 2 heads with 6 needles each—for cords with 5–6 mm diameter - Variants with 3 to 18 needles can be ordered and replaced from the manufacturer. Industrial Yarn Winding Machine: - Winds a skein in approx. 1 minute. - Cross-winding for even yarn distribution. - Automatic stop at the end of the cord. Operation & Control: - Speed display for both needle heads and the take-up unit. - Each needle head can be switched on or off individually. - Adjustable speed Scope of Delivery & Additional Equipment: - 2 knitting machines with a total of 6 needle assemblies - Yarn winding machine - 2 yarn stands for over 24 yarn cones - Operating manual included - Spare needles (approx. 50 pieces) are included Iodpsy Sng Njfx Aagoat Location & Collection: The machines are located in Munich and are ready for collection. Upon pick-up, we are happy to provide instruction on operation. The stated price applies to the complete set (all 3 machines + yarn stands). Individual sale possible, price negotiable. If interested or for further questions, please get in touch!

Condition: new, Year of construction: 2026, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Iedpfong Exaox Aagjat Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 800-900 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, THE ECONOMICAL BENDING MACHINE FOR TIGHT BENDING RADII: The bending machine with free-standing bending head can be easily converted to right and left bending for difficult geometries. The plug-in bending tools allow quick conversion to other tube sizes. Fast hydraulics to shorten non-productive times is an important factor for series production. The clamping pressure for tube clamping can be optimally adjusted. The PLC control (arbitrarily expandable via USB stick) with data memory and latest X2X interface, can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for max. 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The machine has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Iaodpendn Agofx Aaget This excludes incorrect positioning within a tolerance window and thus minimizes the user-related error rate. General error messages are displayed on the large screen with full text. The mandrel retraction is programmable and can be retracted automatically ahead of time when the bending angle is reached. The compact drive unit with the detachable mandrel carrier offers advantages for use at the assembly site as well as for special designs with a very large tube feed and is also available as a stationary variant with a tidy system for tools and mandrel bars. The low-cost alternative to the fully controlled CNC machine. POSSIBLE APPLICATIONS: Hydraulic piping Pipeline construction Plant construction, e.g. chemical industry Metal construction Sample construction Technical data: Bending capacity Ø 6 to 50 x 4 mm depending on material bending radius min/max: 10 mm/140 mm Bending radius min: 1,5 x Ø (standard 2 x Ø) Multifunctional machine control Bending angle adjustment (0.1°) Mandrel beam lengths 1500/3000/4500/6000 mm (special version also longer) Maximum 180º bending result Weight 600-700 kg (depending on version) Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: Automatic mandrel lubrication (minimum quantity) Pneumatic or hydraulic quick-action chuck Positioning of length and torsion via automatic brake function or via manual stops by foot switch Semi-automatic positioning of length and rotation via servo motors Pneumatic rotation stop Pipe calculation software Laser-supported tool monitoring for monitoring the tool tension 10 inch touch screen with integrated tube calculation Bending radius up to 250 mm Data transfer via cable (LAN), wireless (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, PROFILE BENDING ATTACHMENT PB20 The PB20 profile bending attachment is the optimal supplement for tube bending on the 3000 and 6000 models. The device can be easily and quickly mounted on the bending shaft without the use of tools. The workpiece is clamped onto the turntable with the clamping device and pulled around the bending tool. With this system, leg lengths to be bent can be accurately measured in conjunction with a length stop and can be bent with repeatable accuracy. TECHNICAL DATA: - Bending capacity steel 37: 100 x 10 mm, Ø 20 mm. - Many standard tools available - Special tools possible - Sharp-edged tools with bending radius R2 or 5 mm - round tools R 10 to 25 mm for bends max. 260° optional Isdpfx Asnh R Ekeageat OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder Ijdpfx Aonfvx Njageat - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending up to an outer diameter of 100 mm stationary and directly at the assembly site. Transport is possible with lift trucks or the optional rollers. A powerful three-phase motor and a precision gearbox provide a powerful drive. The machine convinces with its compact and slim design as well as the very free bending range. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient and menu-driven user interface in 14 languages with touchscreen control, which guarantees even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, with an angle sequence of max. 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and backward travel, and a parameterizable overbending function is provided to compensate for material springback.With the help of the four material characteristics, the material is automatically overbent to the required bending angle, thus realizing an exact bending result. The principle of "stationary tube and rotating tool" ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to achieve a wrinkle-free bending result and to bend bends with minimal deformations from e.g. stainless steel and copper tubes. With the profile bending attachment PB20 flat, square and round bars can be bent without any problems. Extremely small bending radii are made possible with the KBV small bending attachment. POSSIBLE AREAS OF APPLICATION: - Plant engineering - Hydraulic piping - Meander bending - prototyping - Sanitary and heating engineering - shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material three-phase current 400 V - Bending radius up to 500 mm - Multifunctional machine control Bending angle adjustment (0,1°) Iasdpfx Aasndk N Asgot - Maximum bending angle 240 - Safety foot switch with emergency stop - Weight 600 kg OPTIONAL ACCESSORIES: - Adapter system for tools from model series 3000/6000 with bending radius from 45 mm, incl. hexagonal shaft 40 mm - Profile bender PB20 - for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm - Small bending device KBV - Special tools according to specification - Software adaptations for special tasks OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site