Used Simatic Multi Panel 377 for sale (15,763)

Condition: like new (used), total length: 6,000 mm, total width: 2,500 mm, total height: 1,012 mm, color: blue, Operating conditions: The heavy-duty trailer is designed for use on level, paved roads in internal traffic. Combined journeys: The trailer components are not designed (without trailer coupling) for combined journeys with several trailers. Payload: 60 t at 6 km/h and uniform loading (surface load) of the loading area between the axles. Point or strip loads are only permitted after notification. Base frame: Sturdy welded construction made of sectional steel Loading area: Size approx. 6000 x 2500 mm, loading height approx. 1012 mm, loading area cover with softwood planks, all-round recessed edge protection Steering: All-wheel steering on 4 pendulum axles, drawbar can be raised, removed and repositioned from front to rear, suspension height on towing vehicle approx. 650 mm (other suspension heights are only permitted after notification), drawbar eye to DIN 74054 dm 40 mm, tie rods with adjustable ball joint heads, diagonal or drawbars adjustable and fitted with low-maintenance spherical bearings, drawbar drop safety device to UVV (accident prevention regulations) Chassis: 4 steered swing axles, 2 steered axle lines to achieve an even load on the wheels, wheels with elastic solid rubber tires approx. 559 x 406 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Podpfx Ageuf Rw Texegp Paint finish: Top coat RAL 5002 ultramarine blue Additional equipment: - Optional: dual-circuit air brake system acting on 4 wheels, gradient < 4%. Separate parking brake via spring-loaded brake cylinder, also acting on 4 wheels. - 2 lashing eyes or crane eyes made of round steel welded horizontally into the outer beams on both long sides, only use the crane eyes when the trailer is not loaded - Turning radius inside approx. 2100 mm - Outside turning radius approx. 5500 mm - Drawbar approx. 1500 mm long Rental or sale EU-wide.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Pgedpfxexrtlus Agxsp Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 Pgsdeh Rkhnepfx Agxsp 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Year of construction: 2014, condition: excellent (used), functionality: fully functional, We offer for sale a Bonded Panel Technology LTD (Duemas) Lamella Cutting System for mineral wool boards, complete with extraction unit, manufactured in 2014 and in very good technical condition. This equipment is engineered for precise cutting of mineral wool boards into lamellas with adjustable thicknesses from 40 mm to 200 mm, making it ideal for sandwich panel and insulation material producers. The system comprises: - Lamella saw with 35 Ø550 mm blades (15 new blades in original packaging) - Two 3-meter gravity conveyors - Additional main shaft (2 shafts in total) - Complete set of spacers and top boards for 40, 50, 60, 80, 100, 120, 150, and 200 mm - Complete dust extraction system with 15 kW Auto Shaker filter - Full ductwork and connection components Pedjyk Dmnopfx Agxsgp Main technical data: - Maximum slab width: 1010 mm - Maximum slab thickness: 200 mm - Main motor: 15 kW - Power supply: 415V, three-phase - Approx. 3,000 operating hours (2014–2019) This equipment has been well maintained and is in very good working condition. Immediate availability.

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. Pjdpjq Nd Rbofx Agxjgp - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 2,240 mm, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 800 mm, TECHNICAL DETAILS Cutting length: 5,300 mm Cutting height: 2,100 / 2,240 mm Cutting depth: 800 mm Saw blade diameter: 303 mm Dust extraction port diameter: 120 mm MACHINE DETAILS Pjdpfx Ajzktngjgxjgp Motor power: 5.5 kW Total connected load: 5.5 kW Dimensions & Weight Footprint: 6,300 mm x 1,250 mm x 2,720 mm Weight: 1,200 kg EQUIPMENT Digital display in the Y-axis Center support Free-standing installation Folding slat grid Wooden back panel

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Specification: Psdpfx Aeyzf E Usgxegp Length of cut: 3100mm Width of Cut Vertical: 2070mm Width of Cut Horizontal: 1958mm Depth of Cut: 60mm Motor Power: 5.3HP Saw Blade Dia: 250mm Saw Blade Bore: 30mm 400V 50Hz

Condition: excellent (used), Year of construction: 2000, Ref:11124 . 2000 Rimagraf Multi Clipper Metal Cornering Machine. Psdpezmx Hmjfx Agxogp A semi-automatic electric and pneumatic two-head machine that simultaneously applies and presses two SYMMETRICAL metal corners of any type and size. The left head is fixed, while the right one can be easily adjusted (from a minimum of 120 mm to a maximum of 500 mm) depending on the size of the cover you are using. The corners are placed in the two loading tanks, which rotate to place them on the guide channels. Finally activate the pressing cycle using the foot pedal. Size-change requires only minimum adjustment. Technical data: Manual load Pneumatic connection required Operating voltage: 380V, 50-60Hz Dimensions: 600 x 1250 x 1400 mm Total weight: 180 kg.

Condition: used, machine/vehicle number: 007569, Max. panel width: 2200 mm Max. panel length: 4500 mm Main saw blade projection: 152 mm Psdpovrrldsfx Agxsgp No of Grippers: 11 Thin sheet loading: yes

Condition: new, A simple range of scissor type lifts for attaching to a crane hoist for the lifting of panels using (customer supplied) crane. 1 tonne capacity Minimum wall panel height 2000mm Pgodpfx Ajfqmtkogxep Maximum wall panel height 3500mm One man operation Weight of unit 80kgs

Condition: good (used), Year of construction: 2019, CNC machine with fixed table and dual drive gantry, five axis interpolating electrospindle. Particularly suitable for SIPS panels, woodworking, plywood, MDF, plastics and thermo formed prodcuts. 6120mm x 1605mm Working field in X / Y axis 6850mm X axis stroke 1970mm Y axis stroke 1080mm Z axis stroke Max height / panel passge 700mm C axis rotation + / - 360 degrees 12kw electrospindle with programmable speeds from 500 - 22,000 rpm 12 Position automatic toolchanger Auxiliary 2 position toolchanger Pjdevpv Nbjpfx Agxogp 250m3/hr vacuum pump 2 Field phenolic working table suitable for vacuum cups Hoist points to fix jigs [ series of threaded holes on table for mechanical fixing ] Set of 3 disappearing stops OSAI Series 10 CNC control including [ for example ] PC with Windows XP [ or higher ] Interactive programming Paramteric programming 3D interplolation Cutter radius compensation Extraction requirements 2200m3/hr Weight 5235kg Year - 2019 CE FULL ORIGINAL SPECIFICATION SHOWN IN IMAGES

Condition: new, Automatic mortising machine with 3 heads Worktable dimensions 3000 x 300mm Cast iron construction to give maximum rigidity 3 x vertical hydraulic work piece clamps 3 x horizontal hydraulic work piece clamps Speed movement in adjustable through hydraulics Automatic operation Mortising heads x 3. Manually positioned in X axis with mechanical locks Mechanical siko readouts for height position - Z axis Double eccentric operation of the mortising heads (patented design) Motor HP3 Pgjdpfen Nv Txsx Agxep RPM 2800mm Max distance between 2 x outside mortising heads 2800mm Min distance between 2 x outside heads 180mm - ctre to ctre of mortise. Dust extraction outlets 100mm Hydraulic pump motor 10hp

Condition: like new (used), Year of construction: 2019, functionality: fully functional, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) Pgjdpsu Dw I Esfx Agxjp - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: used, axle configuration: 3 axles, first registration: 12/2011, total length: 11,300 mm, total width: 2,500 mm, total height: 1,350 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2011, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 5280 kg, Gross vehicle weight: 12000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Full air, EBS, Extendable chassis: Rear, MULTI // BPW LIFT AXLE // DISC BRAKES // DE TÜV 05-2027 = Further Information = General Information Cab: Day cab License plate: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 4 mm; Tire tread depth right: 8 mm Axle 2: Tire tread depth left: 8 mm; Tire tread depth right: 7 mm Axle 3: Tire tread depth left: 10 mm; Tire tread depth right: 8 mm Weights Unladen weight: 5,280 kg Payload: 6,720 kg GVW: 12,000 kg Environment Emission class: Euro 0 Maintenance APK (Technical Inspection): valid until 05.2027 Condition Overall condition: very poor Pgjdpfx Aozni Uwsgxjp Technical condition: very poor Optical condition: very poor Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Fair business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, mileage: 109,000 km, power: 88 kW (119.65 HP), first registration: 11/2019, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Chat now via WhatsApp: Get in touch quickly and easily with our sales consultant. Please note!!! Sales are preferably made to commercial businesses. Internal ID number: [3348] ----Optional extras: * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV (German vehicle inspection) & emissions test * Nationwide delivery * Financing possible, even without a down payment * Trailer hitch/rear-view camera can be retrofitted upon request * Spring offer: Upon request and for an additional charge of only €999, increase the trailer load to up to 3,500 kg (vehicle and manufacturer dependent). ----Vehicle highlights: Pgodsy Tgvrspfx Agxop * 19% VAT can be shown * First owner * Accident-free * German vehicle * Regularly maintained * Ready for immediate use * Euro 6 standard * Air conditioning * Partition wall * Rear-view camera Special features: Airbag for passenger side, audio system: radio with Bluetooth and Plug & Music, visibility package, mobile office package 1, full wheel covers Other features: Airbag for driver side, anti-slip regulation (ASR), exterior mirrors electrically adjustable and heated, battery 85 Ah, on-board computer, rev counter, automatic headlight activation, rear wing doors without glazing, interior filter: pollen filter, body/structure: standard van, fuel tank: 80 liters, steering column (steering wheel) adjustable, engine 1.6 liters - 88 kW dCi diesel, rear fog light, wheelbase 3098 mm, tire repair kit, low emissions according to Euro 6 emission standard, sliding door cargo/passenger compartment on the right, seat cover/upholstery: fabric, seats in the driver's cab: driver's seat comfort, 3-way adjustable, daytime running lights, lashing eyes in the cargo area on the side, lashing eyes in the cargo area floor, pre-wiring for electrical superstructure, heat protection glazing ----Do you want to lease or finance? We offer attractive deals – even without a down payment! Please contact us. Contact: Telephone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of over 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, mileage: 149,999 km, power: 80 kW (108.77 HP), first registration: 04/2007, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 5,500 mm, loading space length: 2,800 mm, Equipment: ABS, air conditioning, central locking, Chat now via WhatsApp: Contact our sales consultant quickly & easily. Attention!!! Preferential sale to business customers. Internal ID Number: [ 3093 ] ---- Optional add-ons: * 12–64 month warranty (valid EU-wide) * New inspection * New MOT & emissions test * Nationwide delivery * Financing available with or without down payment * Towbar retrofit available upon request! ---- Vehicle highlights: * Euro 5 standard * German vehicle * Full service history * 2nd owner * Immediately ready for operation * Special equipment: Automatic climate control, cruise control, cargo area with wood panelling, external temperature display, 180A alternator, wood floor in cargo area, fuel filter with water separator, bulkhead with window, metallic paint, Parktronic System (PTS), spare wheel on matching tires, spare wheel holder under rear frame incl. jack, rear mudflaps, passenger double seat in cab, rear door step. Further equipment: third brake light, driver’s airbag, washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), exterior mirrors with integrated indicators, 74 Ah battery, brake assist, headliner in cab, lockable glove compartment, rear door (opening angle 180°), body type: standard panel van, child safety locks, main fuel tank: 75 litres, lashing rings / load securing points, headlight range adjustment, engine 2.1 l – 80 kW CDI CAT, wheelbase 3,250 mm, low emissions according to Euro 4 Gr. III, sliding door (right side to load/passenger compartment), front stabilizer, steel wheels 6.5x16, maintenance interval indicator Assyst, heat-insulating glass, gross vehicle weight 3.50 t ---- Interested in leasing or financing? We offer attractive terms – also possible without a down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Pjdeydhhvepfx Agxsgp Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ---- Note: All information provided online is non-binding and serves only as a general vehicle description. Errors, misprints and prior sale reserved. The binding condition of the vehicle is determined solely by the purchase contract on site or by written confirmation. Vehicles with mileage over 50,000 km or older than 3 years are primarily sold to our commercial customers.

Condition: used, mileage: 110,000 km, power: 140 kW (190.35 HP), first registration: 01/2016, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Chat now via WhatsApp: Contact our sales consultant quickly and easily. Attention! Sale preferably to commercial customers. Internal ID number: [3233] ----Optional add-ons: * 12–64 months warranty (valid across the EU) * New inspection * New TÜV & emissions test * Nationwide delivery * Financing possible with zero down payment * Spring special: On request and for an additional charge of only €999, towing capacity can be increased to up to 3,500 kg (dependent on vehicle and manufacturer). ----Vehicle Highlights: * 19% VAT refundable * Regularly serviced * German vehicle * One owner * Immediately ready for use * Tow bar * Automatic climate control * LED headlights + Bi-Xenon * Automatic transmission * Reversing camera * Cruise control * Bluetooth multimedia * Navigation system * Heated seats * Roof rack Special Equipment: 2,500 kg towing capacity, Cabin Comfort package, Top Load package, Chrome package, rear door/tailgate windows with wiper/washer, wooden load compartment floor, Intelligent Light System LED, LED load compartment lighting, full partition wall with sliding window, partition wall with window, steering wheel (mechanically adjustable column), reversing camera, wipers with rain sensor, cab seats: twin passenger seat, heated driver's seat, comfort driver's seat, side bumper strips & tailgate handle painted, darkened rear windows/privacy glass, 95 Ah AGM battery, 2-way speakers in front Additional Equipment: Third brake light, adaptive brake light, passenger airbag, driver's airbag, hill start assist, aspherical exterior mirrors (both sides), manually adjustable mirrors (from inside), outside temperature display, roof rack mounting rails, BlueEfficiency package, brake assist, ABS+ASR braking system, assist system: attention assist (drowsiness detection sensor), assist system: crosswind assist, windscreen with antenna, 150 A alternator, rear cup holder, front cup holder, seat belt tensioners, passenger grab handle, lockable glove compartment, body: standard van, body: compact, main fuel tank 57 L, cargo securing/tie-down points, multifunction steering wheel with trip computer, engine 2.1 L - 140 kW CDI CAT, rear fog light, wheelbase 3,200 mm, interior rearview mirror, Euro 6 emissions, right-side sliding door (load/passenger compartment), seatbelt warning system (driver/passenger), seat upholstery: fabric, 6.5x16 steel wheels, window pillar trim, half-height hardboard trim in load/passenger compartment, lashing rails on side wall at roof frame, service interval display Assyst, gross vehicle weight 2.80 t ----Interested in leasing or financing? Pgjdpfeyw Erysx Agxjp We offer attractive terms – even with zero down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening Hours: Mon–Fri: 9:00–18:00 Sat: 9:00–14:00 ----Note: All information online is non-binding and serves only as a general vehicle description. Errors, typos, and prior sale reserved. The definitive specification of the vehicle is...

Condition: used, mileage: 80,000 km, power: 85 kW (115.57 HP), first registration: 03/2016, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Buy online. Finance digitally. Have it delivered nationwide. ----Chat now via WhatsApp: Get in touch with our sales consultant quickly and easily. Internal ID number: [3464]---- Your advantages with us: * Digital consultation by phone or WhatsApp * Financing options even without a down payment * Trade-in of your vehicle, old or new Optional extras: * 12-60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & emissions test * Nationwide delivery---- Summer offer: On request and for an additional charge of only €999, increase the towing capacity to up to 3,500 kg (depending on the vehicle and manufacturer). Vehicle highlights: Pgjdpfx Agjzp Tymoxjp German vehicle Regularly maintained Ready for immediate use Power generator installed in the cargo area Double sliding doors Air conditioning Trailer hitch Special equipment: Storage compartment in the headliner of the driver's cabin, aluminum strips at the sliding door entrance, DAB tuner (digital radio reception), ceiling light in the cargo area with door contact, grab handle on the rear pillar on the right, fire extinguisher, vehicle without lowered chassis, additional main key, rear door (opening angle 270 degrees), wooden floor in the cargo area, comfort suspension, comfort lighting in the passenger/cargo area, fuel tank with anti-mis-fuelling protection, charging package dashboard (USB ports and 12V socket additionally), cargo area light LED, cable duct on the rear portal, cable duct on the side wall, multimedia system MBUX (touchscreen 7"), hands-free system Bluetooth, steering wheel with multi-function buttons, smoker's package, seats in the driver's cabin: driver's seat plus (with flat seat surface), lockable storage compartment in storage area above the front window, socket (12V connection) in the driver's cabin, red fuel filler cap, step on the rear door, USB connection in the middle under the dashboard (charging function only), lining in the cargo/FG area: high plastic (up to the roof), lashing rails in the cargo area - side wall on the partition bar, lashing rails in the cargo area - side wall on the roof frame Additional equipment: 3rd brake light, storage compartment above the front window, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag on the driver's side, anti-slip regulation (ASR), display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, outside temperature display, automatic activation of headlights, grab handle for the sliding door on the cargo area partition, electronic brake force distribution (EBV), driving assistance system: breakdown management, suspension: stabilization level I, noise reduction measure exterior, body/structure: high-roof standard van, child safety lock, communication module (LTE) for digital services, fuel tank: main tank 71 liters, cargo area partition continuous, steering wheel (steering column mechanically adjustable), headlight range adjustment, truck registration, marker lights on the side, Mercedes-Benz emergency call system, engine 2.0 L - 110 kW CDI CAT, wheelbase 4325 mm, low emissions according to exhaust standard Euro 6d-TEMP, sliding door cargo/passenger compartment right, safety belt system with warning system (driver's side), seat cover/upholstery: fabric, seats in the driver's cabin: passenger seat adjustable, start/stop system engine, fleece battery 92 Ah, service interval display Assyst, heat protection glazing, permissible total wei

Condition: used, axle configuration: 3 axles, first registration: 10/2018, total length: 9,700 mm, total width: 2,450 mm, total height: 1,600 mm, suspension: air, tire size: 385/55R22,5, color: other, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 5700 kg, Gross vehicle weight: 37000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2018, Steering: 2x20 + 1x30 + 1x40 high cube, Extendable chassis: middle / rear, Axle type: BPW = Further Information = General Information Cab: Day cab License plate: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 385/55R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 7 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 9 mm Axle 3: Tire tread depth left: 9 mm; Tire tread depth right: 7 mm Weights Unladen weight: 5,700 kg Payload: 31,300 kg GVW: 37,000 kg Functional Loading platform height: 110 cm Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: 156 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Correct business practices • We speak many languages Podpfx Agoyt Dnwsxjgp • We understand our customers • Assistance with import and transport • (Export) license plates can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Year of construction: 1998, 13 spindles at 32mm centres Approx 70mm max boring depth Spindle speed 2800mm Pgjdpezd Uu Iofx Agxep 2.5hp motor Manual tilting of boring group from vertical to horizontal [can be locked at 45 degrees]

Condition: used, mileage: 203,433 km, power: 96 kW (130.52 HP), first registration: 11/2016, fuel type: diesel, tire size: 205/75R16C, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, suspension: steel, Year of construction: 2016, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - Speed limiter - Stability control - Alternating current = Further Information = Tire size: 205/75R16C Pgsdpfxszpv Elo Agxep Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tire tread depth left: 7 mm; Tire tread depth right: 6 mm Rear axle: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Unladen weight: 2,180 kg Payload: 820 kg GVWR: 3,000 kg Damage: None

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Pgodpfezp Nt Aex Agxjp Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: used, mileage: 72,072 km, power: 75 kW (101.97 HP), first registration: 10/2022, fuel type: diesel, tire size: 205/60R16, axle configuration: 4x2, fuel: diesel, color: other, gearing type: mechanical, emission class: euro6, suspension: steel, Year of construction: 2022, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional options and equipment = - Spare key - Speed limiter - Reversing camera - Stability control - Alternating current Pgodpezgm Rtofx Agxjp = Notes = Car-Pass URL: Car-Pass ID: ccdee4be-31bb-48ae-a820-8a7dab568c2e = Further information = Tyre size: 205/60R16 Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered; Tyre tread left: 8 mm; Tyre tread right: 8 mm Rear axle: Tyre tread left: 6 mm; Tyre tread right: 7 mm Unladen weight: 1,479 kg Payload: 911 kg Gross vehicle weight: 2,390 kg Damage: none

Condition: used, axle configuration: 3 axles, first registration: 06/2005, color: other, Year of construction: 2004, Empty weight: 5.300 kg Axle 1: left 10 mm right 10 mm Axle 2: left 8 mm right 8 mm Axle 3: left8 mm righ 8 mm We have the possibility to stack trailers! Pgsdpfxsym Aimo Agxop

Condition: used, axle configuration: 3 axles, first registration: 09/2011, color: other, Year of construction: 2011, Empty weight: 5.100 kg Axle 1: left 8 mm right 8 mm Pgedjzp Hc Iopfx Agxsp Axle 2: left 8 mm right 8 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!