Used Rebar Bending Machine Pedax Special 32S for sale (71,556)

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Hnsdpfxjq T Ud Sj Ab Aon Oberwange swivelable Bending angle adjustable via potentiometer Lift height preselectable via scale Manual and automatic bending mode possible Weight: approx. 650 kg

Condition: excellent (used), Year of construction: 2013, controller manufacturer: ELFRAN Digital Read Out, number of rollers: 3, shaft diameter: 130 mm, overall weight: 5,800 kg, total length: 2,200 mm, total width: 2,400 mm, total height: 2,000 mm, Profile bending machine FACCIN - RCMI 130 Hnodpfjyrq Dvsx Ab Asn MACH-ID 9451 Make: FACCIN Type: RCMI 130 Control: ELFRAN Digital Read Out Year: 2013 3 rolls driven 2 lateral guide rolls Digital readout for position rolls Set hardned universal rolls Set hardned profile rolls Horizontal and vertical:|Horizontal and Vertical Shaft Ø: 130mm Number of rolls: 3 Capacity flat: 240 x 30 x 1000mm Capacity Tube: 140 x 5 x 1500Ø x mm Capacity bar: 80 x 80 x 900mm Capacity T-Profile: 140 x 15 x 1400mm Capacity HEA-Profile: 160 x 1700mm Working speed: 0 - 6000mm/min. Side supports: 2 x Hydraulic side arms Length: 2200mm Width: 2400mm Height: 2000mm Weight: 5800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Width:1900mm Hedeycu E Espfx Ab Ajnn Height:2200mm Weight:2900kg

Condition: excellent (used), Year of construction: 2008, control type: CNC control, controller manufacturer: ESA TOUCH PANEL, pipe length (max.): 4,000 mm, bending radius (max.): 180 mm, bending radius (min.): 10 mm, overall weight: 3,700 kg, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, Tube bending machine Transfluid - DB630 A3 CNC MACH-ID 9616 Make: Transfluid Type: DB630 A3 CNC Control: ESA TOUCH PANEL Year: 2008 Max.Tube Ø: 30mm Min. Tube Ø: 4mm Hedsy N Rv Ispfx Ab Aenn Max. Wall thickness:4mm Max. Bending radius:180mm Min. Bending radius:10mm Max. bending length:4000mm 3e dimsion bending:Yesmm/min. Number of tools: 10,12,15,16,18,20,22,28 Length: 6000mm Width: 1800mm Height: 1800mm Weight: 3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Hjdjwpku Dspfx Ab Aenn Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: good (used), Manufacturer: Tracto Technik Type: TUBOMAT Year of construction: 1996 Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device Machine mobile and flexible to use Specifications Metric US Standard Max. Product Ø 42 mm Min. product Ø 6 mm Max. Wall thickness 3 mm Max. Bending radius 5 mm Min. bending radius 180 mm Hnodot Dk Ukopfx Ab Asn Max. Bending length 2000 mm Deburring device Yes Sage device Yes Flanging device Yes Dimensions (estimate) Length 3500 mm width 1000 mm height 1200 mm weight 1000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2022, Adjustable stroke with digital read out positioning display Variable adjustable pressure Quick change tool system Table length: 1250 mm Table width: 660 mm Hnodpjwrzmvefx Ab Ajn Max. working pressure: 30 tons Max. stroke: 235 mm Max. workpiece weight: 250 mm Stroke adjustable: 0 - 235 mm Working speed: 10,000 mm/min Return speed: 20,000 mm/min Power: 3 kW Flat capacity: 200 x 24mm x mm Tube capacity: 60 x 4Ø x mm Solid capacity: 40 x 40mm Length: 1250 mm Width: 700 mm Height: 1200 mm Weight: 1050 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, pipe diameter (max.): 42 mm, pipe length (max.): 3,000 mm, bending radius (max.): 180 mm, wall thickness: 3 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed 6 mandrels up to 24 mm included x 3000 mm Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max. tube Ø: 42mm Min. tube Ø: 6mm Max. Wall thickness: 3mm Max. Bending radius:5mm Min. bending radius:180mm Max. bending length:3000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Hsdeuccw Hopfx Ab Asnn Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2700 mm weight 3300 kg Hnodpevd Dftefx Ab Asn Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Hnodpfx Asxclfzeb Asn Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Table load: 2000 Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg

Condition: good (used), Year of construction: 2005, travel distance X-axis: 560 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,400 m/min, feed rate Y-axis: 2,400 m/min, feed rate Z-axis: 2,400 m/min, table width: 450 mm, table length: 950 mm, Fixed table 950 x 450 mm Feeds all direction ISO-40 and 3kW 3 Axis Digital Read Out Systsem CE-Safety  Coolant system with semi closed lower base  X-Axis: 560mm Y-Axis: 320mm Z-Axis: 400mm Table Length: 950mm Table Width: 450mm Table load: 350 Spindle speeds: 2240Rpm Feed rate X-Axis:2400mm/min. Feed rate Y-Axis:2400mm/min. Feed rate Z-Axis:2400mm/min. Stroke pinole: 0 - 95mm Hsdpfxjxdltbj Ab Asnn Length: 1800mm Width: 1600mm Height: 1900mm Weight: 1700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, Technical specifications: Working width: 6100 mm Max. bending capacity: 10.0 mm Max. bending angle: 8.0 mm Hnedozbmw Dspfx Ab Aon Diameter of upper roller: 470 mm Diameter of side rollers: 250 mm Hardened rollers Conical bending unit through angled positioning of the two side rollers Mobile control panel Hydraulic folding bearings Motor power: 31 kW Dimensions (length x width x height): approx. 8000 x 3200 x 2900 mm Weight: approx. 30 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Additional bending mandrels without bending shoes: Ø 28, 2 x 38 + 42 mm Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Hnodjwnrt Sopfx Ab Aon Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: excellent (used), Technical specifications: Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 Hnodpfx Abozbcwmo Ajn The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, control type: manual, 3-Roll Round Bending Machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Type: PV 7 H Serial Number: 804, overhauled in 1987 The machine has a very robust design and was only used for single-layer bending. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Taper bending device Upper roll diameter: 324 mm Lower roll diameter: 305 mm Hydraulic roll adjustment Dimensions: Hedpfezba Atjx Ab Asnn L x W x H = 5000 x 1600 x H 1900 mm Working height: 1000 mm Additionally, a platform can be purchased for use around the machine.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, working width: 3,000 mm, type of crowning: manual, sheet thickness (max.): 6 mm, total length: 2,500 mm, total width: 4,500 mm, total height: 2,500 mm, Equipment: documentation/manual, emergency stop, Hydraulic pivoting bending machine Manufacturer: KRAMER, Type: AMautVIIhy3000 Year of manufacture: 1988 Technical data Manufacturer: KRAMER Type: AMautVIIhy3000 Year of manufacture: 1988 Usable length: 3030 mm Sheet thickness: 6 mm Stroke: approx. 300 mm Dimensions: approx. L x W x H 4.5 x 2.5 x 2.5 m Hnsdpfxey T R Swe Ab Asn Equipment: • Bending angle adjustment via potentiometer! • Controlled rear stop, 1000 mm • Segmented gooseneck tool • Bending rail + reinforcing rail • Manually adjustable crowning • Documentation All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings Hodpfx Ajza D U Djb Ajnn CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2022, sheet width:1550 mm plate thickness:4 mm pre-bending:6 total power requirement:2,2 kVA weight of the machine ca.:1,42 t dimensions of the machine ca.:2,7 x 0,75 x 1 m roll feed:3,5 m/min Motorised blade roller 3 rolls Material width 1550 mm Material thickness max. 4 mm Hnodpfet Hmlqox Ab Ajn Shaft diameter 140 mm Roll feed 3,5 m/min

Year of construction: 2025, condition: used, functionality: fully functional, Max Rebar Tying Machine RB 443T — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Hnsdpfx Aboy A Haij Aon Price EUR 1,850 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, Year of construction: 2020, operating hours: 6,493 h, machine/vehicle number: TB25A-008, overall weight: 650 kg, total length: 2,600 mm, total width: 1,000 mm, total height: 1,200 mm, power: 1.4 kW (1.90 HP), Tubobend 25 Hodpfjy H I R Rsx Ab Aonn Machine Data Designation: Tubobend 25 Operating Hours: 6493 h Weight: approx. 650 kg Dimensions: approx. 2600 × 1000 × 1200 mm Technical Data Control System: Siemens SIMATIC Pipe Diameter (max.): 25.0 × 3.0 mm (E 235 with CLR = 2 × D) Bending Radius Rm (max.): 75 mm Bending Radius Ri (min.): 25.0 mm (with bending mandrel 40 mm) Effective Bending Angle (max.): 180° (+10° overbending) Bending Speed (max.): 58°/s Bending Accuracy: ± 0.2° Dimensions (L × W × H): approx. 5,650 × 1,000 × 1,250 mm Weight: approx. 770 kg Connected Load: 1.35 kW (installed) Mains Voltage: 400 V / 50 Hz / 3 phases Mains Fuse: CEE 16 A Color: RAL 7021 Black-Gray / RAL 5015 Sky Blue Performance Data Connected Load: 1.4 kW Bending Data Bending Capacity (Mild Steel): Ø 25.0 × 3.0 mm Max. Bending Radius: 75 mm Max. Bending Acceleration: 58 °/s Bending Accuracy: ± 0.2°

Condition: new, Year of construction: 2026, Ring Rolling Machine Zopf - Model ZB 60 M standard basement - year of construction 2023 - motorized - two working rolls - shaft diameter 30 mm - including standard rolls Hnedpfxegh T H Ds Ab Aen - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 150 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase

Condition: new, Year of construction: 2025, Bending machine ZB 70/3 H ECO - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical Hedpohmbh Hofx Ab Asnn - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg - dimensions: 900x650x1070 mm - colour RAL5012 / RAL7015

Condition: ready for operation (used), Year of construction: 2011, Stierli bending machine 300 HE / Like new, maximum 5 operating hours Hnedpfxjzbtfhj Ab Aen -CE marking -Year of manufacture 2011 -Max. working pressure 300 KN -Stroke length 300 mm -Motor power 4 kW -Manual control -Foot switch -Various bending tools -Stop -Documentation Dimensions: L x W x H 1.5 x 1.2 x 1.5 meters / Weight 850 kg Errors and omissions excepted.

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Hnjdpfx Abeyi Hrwo Asn Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Weight: approx. 2 tons Good condition

Year of construction: 2024, condition: new, MRB-S Series Technical data (see pictures) Standard equipment CE Conical bend Motorized back roller Additional control panel for upper and lower rollers which are operated with landing gear. SAE 1050 steel rollers Induction hardened rollers, Relaxed steel construction, at 2.5 and 3m Machine supports, brake system for precise bends, Digital display. Motorized back roller with puller Optional equipment Motorised under-roller mounting, ground rollers Extended rolls for profile bends, Special rollers for profile bending, Special packaging for international deliveries. MRB series: Technical data (see pictures) Standard equipment Hnjdpfxjfin E Dj Ab Ajn CE standard Digital display Conical bend Motorized back roller with tightening Additional control panel for upper and lower rollers, which are operated with landing gear. operated by landing gear. SAE 1050 steel rollers, Induction hardened rollers, Relaxed steel construction, Braking system for precise bends. Optional equipment Motorized bottom roller with suit, stone rollers Extended rolls for profile bends, special rollers for profile bending, Special packaging for international Programmes Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Durma Maschinen GmbH is part of the internationally successful Durmazlar Group, which exports new, high-quality sheet metal working machines all over the world and is headquartered in Türk