Used Pokolm Hsl 4 for sale (57,584)

Condition: used, power: 338 kW (459.55 HP), axle configuration: 6x2, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, = Additional options and equipment = - Braking system = Notes = - Wheelbase: 4,800 mm - AS cab with high roof - Electrically operated lifting roof - Air suspension for the cab - Fog lights - Mirrors electrically adjustable and heated - Electronic immobilizer - Emission standard EURO VI E - Mechanical battery disconnect switch on chassis - Hi-TroniX 12TX transmission - Lift system for trailing axle - Air suspension on rear axle - Air suspension on front axle - Heated fuel pre-filter with separator - Adaptive cruise control (ACC) - VDI interface (Vehicle-Data-Interface) for telematics services (FMS), version 4.0 - Pre-installation for toll system (OBU) - Electronic Stability Program (ESP) - Lane Departure Warning System (LDWS) - Emergency Brake Assist (AEBS) - Left and right storage compartment - Transparent sun visor, mounted externally on cab roof - Single-piece lower bed and upper bed - Air horn behind bumper (compressed air) - Top refrigerator incl. thermo-insulated box - Additional diesel/water heater 4KW - Trailer hitch, 40 mm, 130 kN - 15-pin trailer socket - Axle load display in the cluster - LED tail lights - Intarder - Pre-installation for auxiliary headlights on cab roof - Reverse warning buzzer, can be deactivated - Tires 315/70 R22.5 DRIVING COMFORT PLUS - Connectivity box 4G + mobile phone holder incl. TCO service contract - HI-Comfort driver's seat, adjustable, air-suspended + 3-stage cooling or heating function - Infotainment navigation (EU/RU/TR) + Driver Pal - Fully automatic climate control - Leather steering wheel with function buttons for radio, phone, and menu navigation Bodoyfq Nxspfx Akaolg - Roller sun blind for driver and passenger side windows Superstructure: GÖBEL – STANDARD - Swap system - BDF container with 1,220 / 1,320 mm parking height - Galvanized - 4 work lights (2 behind the cab, 2 at the rear) On request, we will be happy to provide you with a leasing or financing offer. Mr. Seidel (Tel.) is happy to assist you. For more information, please visit our homepage. ... Errors, changes, and prior sale excepted! ESP, Auxiliary heating = Additional information = Gross vehicle weight: 26,000 kg Contact Tobias Ebert for further information.

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Blsdpfxetp I S Ao Akaeg

Condition: used, mileage: 504,913 km, power: 355 kW (482.67 HP), first registration: 02/2023, fuel type: diesel, empty load weight: 10,800 kg, maximum load weight: 15,200 kg, overall weight: 26,000 kg, tire size: 315/70 R22,5, axle configuration: 6x2, wheelbase: 5,050 mm, next inspection (TÜV): 12/2026, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, parking heater, trailer coupling, Color: E1980WHTE Crystal White, Bodybuilder: SDG, Unladen weight: 10,800 kg, Permissible total weight: 26,000 kg, Tire size: 315/70 R22.5, 1st axle: , 2nd axle: , 3rd axle: , Fabric seats, air suspension, retarder, digital tachograph: VDO1c G2V2, Trailer coupling: 2x, BDF interchangeable frame: SDG 1120mm / 1320mm / C715-C782, Electronic brake system (EBS), brake assist, Adaptive Cruise Control (ACC) with Predictive Cruise Control (PCC), Air-suspended driver's seat, seat heating, LED headlights, radio, audio interface, sound system, lane departure warning system, power steering, adjustable steering column, electric windows, roof hatch, fog lights, electric exterior mirrors, curb mirror, tire pressure monitoring, central locking, sun visor, steered trailing axle: lift & steerable trailing axle, cool box and refrigerator, axle load display, work lights, ambient lighting, hill start assist, cup holder, cornering light, mirror package, turn assist system, information and service system, upper and lower bed, suspended cab, ex-rental vehicle, vehicle location: 90518 Altdorf near Nuremberg. Errors and changes excepted. Bodpfx Akoy Ela Hjaolg

Condition: excellent (used), Year of construction: 1994, 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm. Bedpfx Akjl Dw Nxjaslg

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Bjdped Tbbdefx Akaolg - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Bljdpfx Asfdkb Tskajg - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Bljdpfx Aod Tqalekaog - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Bodpfxjfdkb Ue Akaolg The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) Bledpsguk A Hefx Akaog - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Bledofdkbhjpfx Akaeg The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Bljdoguk Dkepfx Akaog When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth Bsdpfx Aoguk Dvekaolg - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), 4-station bookbinding press for gluing blocks MURO 4 x 5000 A4/HAD Solid construction, waterproof board, and galvanized components. The machine is in perfect condition. Technical specifications: Format: 350x320x550 (W/D/H) Number of stations: 4 Power supply: 230V Blodpfx Aksy Ehnasasg Maximum power consumption: 4kW Weight: 102kg High clamping force, flywheels with a comfortable grip. Electric drying with two power levels: 2 and 4kW Each press can be tilted up to 45′ The structure is mounted on wheels for easy movement.

Condition: good (used), GUK FA 49/4 Folding Machine + GUK FA 49/4 Cross Folding Module The machine is in very good technical and visual condition. Format: 490x690mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes on the main unit 4 perpendicular cassettes on the cross-folding unit First cassette extended. Cassette adjustments are dial-based. Smooth speed control. Counter with batching function and folding speed indicator. Blsdpfoy Ehk Iex Akaeg Rietschle compressor. Tool roller with a large number of perforating, creasing, and cutting tools. Raised sound insulation covers. Vacuum-assisted feeding Mobile delivery (free standing delivery) with smooth speed control Full documentation. Extensive set of accessories.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: 66654, sheet thickness (max.): 6 mm, working length: 4,050 mm, TECHNICAL DETAILS Working length: 4,050 mm Maximum sheet thickness: 6 mm MACHINE DETAILS Voltage: 380 V EQUIPMENT Electrically adjustable back gauge Blsdpfxoylv Nwe Akasg Electrically adjustable cutting angle Electrically adjustable blade gap Electrically adjustable blade gap

Condition: excellent (used), Condition: used, fully functional Manufacturer: BÜHNEN / MELER Model: HB 6050-2 NI120 📋 Item Description: For sale: professional HOT-MELT adhesive unit BÜHNEN / MELER 6050 designed for industrial glue application. High-quality device – European-made, suitable for use in: packaging furniture manufacturing wood industry production lines ⚙️ Technical data (from the nameplate): Power supply: 230V / 50-60 Hz 400V (3-phase) Power: up to 4.7 kW Max. temperature: 200°C Max. pressure: up to 160 bar Outlets: 2 Model: HB 6050-2 NI120 📦 Included: ✔️ BÜHNEN / MELER adhesive unit ✔️ 4 heated hoses (complete set!) ✔️ Cables and connectors as shown in the photos 🔍 Condition: used item shows normal signs of use in good technical condition tank interior shown in photos Bjdpfxjy Aam No Akaelg sold exactly as pictured

Condition: excellent (used), I am offering a professional BÜHNEN 6040 adhesive application unit, designed for industrial adhesive application (e.g. hot-melt). The device is used, in good technical condition, with normal signs of wear and tear. Reliable German-made equipment – ideal for manufacturing plants, packaging, carpentry, upholstery, etc. ⚙️ Technical data (from the nameplate / visible in the photos) Power supply: 230V / 50 Hz Power: 235 W Max. pressure: up to 160 bar Max. temperature: up to 200°C Model: 6040 Manufacturer: BÜHNEN GmbH (Germany) 📦 Included in the set: ✔️ BÜHNEN 6040 glue application unit ✔️ 4 heated hoses (complete set) ✔️ Cables / connectors as shown in the photos ✔️ Control and connection elements Bljdpfx Akey Aagioaog 🔍 Technical condition: used device visually normal signs of use no visible mechanical damage interior of the tank visible in the photos sold exactly as pictured

Condition: new, Hardfacing electrode Make Duramit W4 Bodpfx Ajhhyitskajlg material 1.2567 diameter 6 mm length 450 mm 40 pieces in a package 6 packages available 95 Euro per package

Condition: new, Hardfacing electrode Make Duramit W4 material 1.2567 diameter 3,25 mm length 350 mm Bjdpfx Akehhyizeaslg 120 pieces in package 2 packages available 95 Euro per package

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting height (max.): 400 mm, cutting width (max.): 400 mm, total height: 1,720 mm, total length: 2,600 mm, total width: 2,400 mm, overall weight: 2,200 kg, table height: 700 mm, cutting range round steel at 90°: 400 mm, feed length X-axis: 600 mm, saw band length: 5,700 mm, saw band width: 41 mm, Fully hydraulic high-performance bandsawing machine in heavy-duty construction, with a horizontally parallel traversing saw blade, designed for cutting profiles, pipes, and solid materials of all grades, including extremely tough-to-machine materials (e.g., titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw bands. The saw unit is constructed in a fully solid design from polymer concrete, providing maximum running smoothness and service life for the saw blades. Guidance of the sawing unit is via two vertical square columns (double-column guide) with hardened and ground guide rails. Mechanical saw band tensioning with preloaded carbide saw band guides. Material clamping is performed by two horizontal frame clamping vises. Material feed is via a non-driven roller conveyor integrated into the machine with twelve transport rollers, enabling easy transport of short offcuts. Year of manufacture: 2008 Cutting range round: 400 mm Cutting range square: 400x400 mm Material feed (automatic): 600 mm Bsdpfx Ajupvrxokaelg Multiple material feed: 99,999 mm Cutting speed (infinitely variable): 20–130 m/min Total drive power: 7 kW Saw motor drive power: 4 kW Clamping pressure reduction: infinitely adjustable Material support height: 700 mm Saw band dimensions: 5,090 x 41 x 1.3 mm Minimum cut length in automatic mode: 6 mm Remaining piece length in automatic mode: 80 mm Voltage: 380V/50 Hz Dimensions (LxWxH): 2,600 x 2,400 x 1,720 mm Weight: 2,200 kg Equipment: • Coolant system • Full enclosure • CNC control • Standstill monitoring • Side guide rollers • Height measurement system • Light barrier

Condition: new, I am offering a professional drum pump from the renowned German manufacturer Lutz – designed for use with various liquids (chemicals, oils, industrial media). ✅ Condition: ✔️ New ✔️ Motor housing has been replaced with an original (factory) part – the previous one was damaged during transport ✔️ Fully functional, ready for operation 🔩 Technical data: Manufacturer: Lutz Pumpen GmbH (Germany) Pump model: MP PP 50/41-R DL SS Motor: MI 4-230 Power supply: 220–230 V / 50 Hz Power: 450–500 W Current: 2.5 A Protection class: IP24 Tube length: 1200 mm Material: PP (polypropylene) + stainless steel (SS) ⚙️ Applications: Bedpfoyzulwjx Akajlg - Industrial chemicals - Oils, technical fluids - Industry, workshops, manufacturing - Emptying barrels and tanks 📦 Included: ✔️ Lutz pump ✔️ MI 4-230 motor ✔️ Hose + fittings as shown in the photos 🌍 Country of origin: 🇩🇪 Germany ℹ️ Additional information: - High-quality equipment – German-made - Ideal for professional applications - Shipping or personal collection available

Condition: used, mileage: 372,928 km, power: 330 kW (448.67 HP), first registration: 06/2022, fuel type: diesel, maximum load weight: 15,875 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,900 mm, color: other, driver cabin: other, gearing type: semi-automatic, emission class: euro6, suspension: air, loading space length: 7,820 mm, Year of construction: 2022, Equipment: air conditioning, cruise control, navigation system, onboard computer, parking heater, This offer is non-binding. Subject to errors and prior sale. If a foreign currency is specified, it will be converted at the current daily exchange rate. The currency of the vehicle's location is authoritative. Engine: OM471, inline 6-cylinder, 12.8 liters, 330 kW (449 hp), 2200 Nm, High Performance Engine Brake, Predictive Powertrain Control, front axle air-suspended, trailing axle, 7.5 t, liftable and unloadable, air suspension, rear axle, tire pressure monitoring, 630 l aluminum tank, L-cab, cab width 2.50 m, StreamSpace, adjustable aerodynamic package, MirrorCam, central locking system with comfort locking, roll control assist, comfort upper bunk (wide, level adjustable), refrigerator in drawer under the bed, electric stationary air conditioning, automatic climate control, auxiliary hot water heating, comfort driver's air-suspension seat, rain sensor, automatic high/low beam and cornering light, headlamp cleaning system, lane keeping assist, distance assist, attention assist, traffic sign recognition assist, driver's airbag, cruise control, navigation system. - Frame ride height: 1,120 mm Bedpfx Ajyiv Tdokaslg - Parking height: 1,300 mm - Height-adjustable twistlocks front & rear, adjustment range: 120 mm - Parking height: 1,400 mm "MAX" (twistlocks top) - Trailer coupling manufacturer: Ringfeder, type: C50-X - DTCO 4.0

Condition: excellent (used), load capacity: 4,000 kg, Equipment: foot remote control, Heinrichsglück 4 ton load capacity, TOP condition 4000 kg capacity welding positioner, complete set Horizontal load capacity: 4000 kg, tilted: 4000 kg Infinitely variable tilt and speed adjustment Very robust construction Speed continuously adjustable from 0.05 to 1.5 rpm, digital display Table diameter: 1500 mm Height horizontal: 1230 mm, tilted to center: 1000 mm Length 2.0 m x width 1.6 m Bledpoyuph Ejfx Akaog Hand remote control and foot pedal

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, load capacity: 9,150 kg, load capacity per storage section: 3,050 kg, total length: 22,800 mm, total height: 3,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 4, frame height: 3,500 mm, frame width: 1,100 mm, shelf height: 3,500 mm, shelf length: 22,800 mm, 4 double-bay pallet racks (M35112711-3) Each 5.7 m long, 3.5 m high, 1.1 m deep, Each with 2 bays, 2.7 m wide, Each with 3 beam levels, shelf load capacity 3000 kg. - 12 frames (RM3511 - RAL5019) - 24 base plates, shim material, fastening material - 48 floor anchors (ZZBA1210) - 48 single beams (T2711 - RAL2008) - 4 load capacity signs (BSMcP) Bsdpfxeyz Icce Akaolg Frames bolted, not pre-assembled Freight / Delivery: - Max. 20 working days after receipt of payment - Delivered free to site/installation location - Unloading from the truck to be carried out by the buyer using their own lifting equipment - Deliveries available throughout the Federal Republic of Germany (except islands); deliveries to EU countries upon individual agreement.

Condition: used, mileage: 894,203 km, power: 338 kW (459.55 HP), first registration: 01/2019, fuel type: diesel, empty load weight: 10,540 kg, maximum load weight: 15,460 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 1 mm, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Unladen weight: 10,540 kg, permissible total weight: 26,000 kg, 1st axle: 385/55 R22.5, 2nd axle: 315/70 R22.5, 3rd axle: 315/70 R22.5, velour seats, air suspension, non-binding offer, subject to errors and prior sale. Image may not correspond to the actual offer. Bedpfx Akoyv R T Hsaolg