Used Ingramatic Rp1 for sale (76)

Condition: used, Year of construction: 1980, Pressure capacity 1,250 kN Adjustable stroke 20 - 140 mm Lredpfsrm Ntpox Aigsr Stroke rate 70 1/min. Further data and pictures on request the press is currently not functional and must be mechanically and electrically overhauled

Condition: used, Single-column eccentric press WEINGARTEN type ARP 100 Machine no. No. 122481 Year of construction 1984 Pressure capacity 100 ton. throat 400 mm Table size 920 x 660 mm ram surface 700 x 450 mm Rear upright width 735 mm Stroke adjustment 20 - 160 mm Plunger adjustment 80 mm Lrjdpju Rwa Ijfx Aigsr Installation height with 160 mm stroke max. 355 mm (without intermediate table top) Installation height with 20 mm stroke max. 425 mm (without intermediate table plate) Stroke rate 60 strokes/min. Table surface intermediate table top 920 x 610 mm Thickness of intermediate table top 90 mm Hole in intermediate table top Ø 210 / 180 mm Through-hole in machine table Ø 210 / 180 mm Table height above floor 800 mm (without intermediate table top) T-slot width in table and ram 22 mm Clamping pin bore 50 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz - Hydraulic overload protection in ram - ORTLINGHAUS pneumatic clutch/brake combination - Electromotive ram adjustment with counter - Clamping pin bore with clamping piece - Front crankshaft support bearing - Gear reduction gears in closed oil bath gearbox - Two pneumatic tappet compensation cylinders - WOERNER automatic central grease lubrication - Lift release via electric foot switch or two-hand control panel - Electrical control cabinet permanently attached to the machine - Operating instructions and circuit diagram - UVV for manual insertion work Space requirement L x W x H 2200 x 1600 x 3250 mm Weight 8.3 tons Good condition

Condition: excellent (used), Wide belt sander for calibration and fine sanding Working width 1100 mm Min. / max. workpiece height 3 - 120 mm Feed motor power 0.8 kW Sanding belt speed 18 m/sec Sanding belt dimensions 1115 x 2620 mm Feed speed 4.5 / 9 m/ min Suction connection 3 x 160 mm Compressed air connection 6 bar 1st unit Sanding roller rubber-coated 90 Sh Motor power 11 kW 2nd unit Combi unit Rubber-coated sanding drum 60 Sh Sanding pad, rigid Motor power 11 kW 3. cleaning brush unit Automatic workpiece thickness adjustment at infeed with digital workpiece thickness display Table extension in the outfeed Dimensions approx. L x W x H = 2291 x 1784 x 2350 mm Weight approx. 3000 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number). Lrjdpfxstwzyfj Aigor

Condition: used, Year of construction: 2007, Used Palletizer ACMI RASAR P180 2200 plastic crates – hour General Features of the Automatic Palletizer Ljdpfxewimlxs Aigerr The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour is a conventional automatic low-level palletizer designed to optimize end-of-line operations in high-speed bottling processes. Specifically, the Italian manufacturer ACMI built this model in 2007. As a result, it delivers a nominal capacity of 2200 plastic crates/hour, which ensures high productivity. In particular, it suits bottling lines that handle 1-liter formats in both glass and PET. Moreover, the system prioritizes reliability and speed in demanding industrial settings. Compatibility with Bottle Crates and Pallets The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour efficiently handles crates containing 12 glass bottles. Consequently, it proves ideal for beverage production environments where crate-based transport is standard. Furthermore, the machine processes standard CP1 pallets (1000×1200 mm), ensuring compatibility with common logistics solutions. In addition, it includes an integrated pallet magazine, which significantly reduces the need for manual intervention. This, in turn, contributes to continuous and automated operation. As such, it streamlines the entire end-of-line workflow. Movement System and Automation This model features a low-level movement system. Not only does this simplify the mechanical layout, but it also facilitates maintenance access. Therefore, operators can perform inspections and servicing more efficiently. A Siemens PLC manages the palletizing cycle, thereby guaranteeing precise control and high reliability. Additionally, the PLC allows seamless integration with upstream and downstream equipment. In short, the automation setup supports complex configurations while maintaining ease of use. Safety Functions and Technical Documentation The Used Palletizer ACMI RASAR P180 2200 plastic crates-  hour includes all required safety features to comply with current industrial regulations. Specifically, it comes with physical guards, presence sensors, and interlocks. Thanks to these features, the system protects operators during operation and maintenance. Besides, it includes complete technical manuals. These documents, in turn, support technicians during installation, configuration, and servicing. Consequently, the equipment offers not only performance but also compliance and maintainability. Current Condition and Recommissioning Potential Currently, technicians have dismantled the Used Palletizer ACMI RASAR P180 2200 plastic crates – hour. Therefore, transport and storage become significantly easier. Additionally, the modular construction reduces both time and effort during recommissioning. As a result, companies can quickly reintegrate the machine into existing production lines. Technical Conclusion of the Used Palletizer ACMI The Used Palletizer ACMI RASAR P180 2200 plastic crates – hour offers a highly specialized and reliable solution for manufacturers who need high-capacity palletizing systems.

Condition: used, Year of construction: 1998, functionality: fully functional, DMC Polisand 110 RP Wide Belt Sander Year 1998 Paint Wide Belt Sander Total installed power approx. 23 kW Sanding width 1100 mm Workpiece thickness up to approx. 170 mm Lredpfx Asv Ivuusigjr Motorized height positioning with digital reading device Vacuum conveyor belt, F,LLI FERRARI vacuum unit with 4 kW motor power Feed motor power 1.50 kW Unit 1: Grooved rubber sanding roller, with 8.8 kW blower Unit 2: Sanding pad, with 15 kW blower 380 V / 50 Hz Weight 2300 kg Dimensions: 2.45 m x 1.85 m x 2.0 m

Condition: used, Year of construction: 1999, machine/vehicle number: 4127, SECOND-HAND 4 ROLLERS GLUE SPREADER OSAMA S4RP-1300 - WORKING WIDTH CM. 130 WITH GLUE MIXER - Mixer CLT-A (Automatic feeder for bi-component glue) Automatic mixing and feeding system of two-components vinyl and urea glues with catalysers, sulphate and isocyanate, for rollers gluing machine. Lsdpfx Aowr Dc Tsigsrr This device is required for production in continuous. Standard version includes a mixing head mounted on the gluing machine, fed by special pumps for glue and catalyser. The pumps take the products directly form the storage tanks and they are activated by the level sensors placed between the rollers, thereby ensuring a constant level of glue. - Working width 1300 mm - Automatic washer for rollers - N. 4 rollers - Volt. 380/50 - S/N 4127 - Year 1999 - *m57

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M14E/9142, Offer Number: M14E/9142 Machinetype: flat die thread rolling machine Info: with washer assembly Make: TLM Lrjdpfx Ajy Dc Ekoigor Type: RP10 Constr. year: 1992 diameter range: 10 mm shaft length under head: 100 mm max. thread length: 60 mm output - pieces/min: 320 Location: Europe

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2850x2050x2200 mm Weight 5150 kg Ledov A Hfyepfx Aigorr Total power requirement 78 kw

Condition: excellent (used), Year of construction: 2017, Technical data: Product number: MRP 150 Year of manufacture: 2017 Motor power: 1.5 kW Capacity: 127 m3/h Max. vacuum: 0.1 mbar Noise level: 74 dB Rotational speed: 1500 rpm Weight: 150 kg Lodpfx Aeyxh Dzsigorr Dimensions (H x L x W): 851 x 441 x 410 mm The pump achieves a vacuum down to 1 mbar, as shown in our recorded video. The pump is in perfect condition, barely used.

Condition: used, ORT RP12 2-roll Ljdpfx Aioyvk S Ajgjrr 12 ton Thread rolling machine The machine is in our warehouse, under power

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder Lrodot H Nhhjpfx Aiger 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 6,334 mm, total width: 4,390 mm, total height: 2,465 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping Technical data: Sheet format max. 830 x 1,150 mm Sheet format min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Materials that can be processed: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: Automatic non-stop roll cloth in the delivery Stripping station Centerline Quick-clamping frame stripper upper tool and central stripping board Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm punching plate incl. 10x 1mm punching plates 2x 5mm cutting plate 2x clamping frame without Quicklock Ledpfx Aet H Nc Ssigsrr Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4410x3050x2727 mm Weight 13070 kg Total power requirement 172 kw Ljdpfx Aijv A Hf Tegorr Wide Belt Sanding machine Linie SANDOMAT WT-RRC1300+SUR-RP1300 Wide Belt Sanding machine WT RRC1300 (Roller+Roller+combination)- Max. Working width 1300mm- Min. Working Length 490mm- Working Thickness 3-150mm- First unit: Contact roller Ø240- Second unit: Contact roller Ø240- Third unit: Ø240 pad- Total: Motor 77kw- First Unit: Motor 30kw- Second Unit: Motor 22kw- Third Unit:Motor 18.5kw- Conveyor belt: Motor 4kw- Lifting Motor 0.55kw- Brush roller: Motor 1.5kw- First unit: Contact roller shore Steel- Second unit: Contact roller shore 80sh- Third unit: Contact roller shore 55sh- Conveyor belt: Speed 5-30m/min- Abrasive Belt Size 1350*2620mm- Air Pressure 0.6Mpa- Overall Dimensions 2235×3050×2600mm- Net Weight 5700 kgs- Working Table Fixed- Working table height from the ground 900mm- Voltage 400v/50hz/3phases- Air jet for each belt Optional- Automatic centering of conveyor belt YES- Press roller (rubber) YESWide Belt Sanding machine SUR-R-P1300 (Roller+Roller+Pad)- Max. Working width 1300mm- Min. Working Length 350mm- Working Thickness 10-100mm- First unit: Contact roller Ø255- Second unit: Contact roller Ø255- Third unit: pad- Total: Motor 95kw- First Unit: Motor 37kw- Second Unit: Motor 30kw- Third Unit:Motor 18.5kw- Conveyor belt: Motor 4kw- Lifting Motor 0.55kw- Brush roller: Motor 0.55kw- First unit: Contact roller shore 80sh- Second unit: Contact roller shore 70sh- Third unit: Contact roller PAD- Conveyor belt: Speed 5-30m/min- Abrasive Belt Size 1320*2000mm- Air Pressure 0.6Mpa- Overall Dimensions 2175×2976×2727mm- Net Weight 7370 kgs- Working Table Fixed- Working table height from the ground 1038mm- Voltage 400v/50hz/3phases- Air jet for each belt YES- Automatic centering of conveyor belt YES- Press shoes(steel) YES

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4630x3005x2334 mm Weight 12160 kg Lrjdpjv A Hftjfx Aigsr Total power requirement 135,6 kw

Condition: good (used), Contactor, semiconductor contactor, contactor, power contactor, time-delay relay, motor contactor, auxiliary contactor -Manufacturer: Siemens, time relay -Type: 3RP1540-1AN31 Lrodpszmticefx Aigsr -Quantity: 1 piece available -Cardboard dimensions: 105/90/H30 mm -Weight: 0.1 kg/pc.

Condition: used, ORT RP18B overhauled Lrodpjuua H Rjfx Aigor

Condition: refurbished (used), Thread rolling machine ORT RP18 B 2-roll overhauled Ljdpfxjvxa Dbj Aigsrr See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2

Condition: new, functionality: fully functional, machine/vehicle number: HR34796, Year of construction: 2023, load capacity: 1,600 kg, lifting height: 4,600 mm, free lift: 1,455 mm, fuel type: electric, mast type: triplex, construction height: 2,030 mm, fork length: 1,200 mm, empty load weight: 3,100 kg, total length: 1,903 mm, drive type: Elektro, construction width: 1,050 mm, Electric 3-wheel forklift Chassis number: HR34796 Load center: 500 Fork width: 80 mm Fork thickness: 40 mm Lrsdjw Sbtuspfx Aigjr ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Condition: New device Technical condition: New Front tires type: Superelastic Front tires size: 18x7-8 Front tires condition: New Rear tires type: Superelastic Rear tires size: 15x4.5x8 Rear tires condition: New Battery voltage: 48V Battery Ah: 575Ah Battery type: PzS Battery year of manufacture: 2023 Battery condition: New Description: 12 months factory warranty / Max. 2000 operating hours, cabin construction possible Side shift, 3rd valve, 4th valve, rear work light, front work light, full free lift, CE certificate, 3-wheel, seat, 2 front and 1 rear halogen work light Red seat belt with restraint system Hose group for 4 functions (2 additional functions) Accutouch mini lever hydraulic controls 4 functions (2 additional functions) Hydraulic valve Integrated side

Condition: new, Type R-RP1300 Working width 1300 mm Min. working length 500 mm Working thickness 3-200 mm Feeding speed 0-30/min Total motor power 30,37 kW Motor for first unit 15 kW Lrsdpfx Aedflqasigor Motor for second unit 11 kW Dust cleaning brush 0,37 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2400mm Weight 3300kg

Condition: new, with planing spindle Type R-R-RP1300 Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Ljdpjd H Sc Eofx Aigsrr Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: used, Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm Lrjdpfx Aiet Apugogsr See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Single-Punch Tablet Press Model CPR1 The CPR 1 benchtop press is a single-punch machine designed for tablet production. Powder is loaded into a hopper and directed through a stainless steel tube into the die cavity. The adjustable punch compresses the powder, and the finished tablet is ejected from the machine. The press operates with a continuous motion utilizing cam disks. An operator panel equipped with a tablet counter is included. The machine is capable of producing up to 3,000 tablets per hour. The tablet press can be fitted with tooling for round, oblong, or oval tablets. Punch and die changes can be carried out simply and quickly. All product-contact parts are made of AISI 316 stainless steel. Lrjdpfjykukqsx Aigjr Technical Data Machine dimensions CPR1: 350 x 500 x 720 mm Net weight CPR1: 80 kg Electrical connection: 1 Ph. 230 V. 50 Hz Electrical power: 1.20 kW Tablet output: max. 3,000 tabs/h Tablet size range: 4–20 mm

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm total power requirement 0,75 kW weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Ljdpfx Aefv H Edsigsrr Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 8.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Ljdpfelyqrcox Aigjrr Equipment: Non-Stop-feeder Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machinedelivery 6-8 month after order

Year of construction: 2026, condition: new, Specification: Maximum sheet size 740 x 1060 mm Minimum sheet size 330 x 400 mm Max. cutting pressure 3.0 MN Maximum number of strokes per hour 9.000 sh/h Suitable for following material Paper to a minimum weight of 80 g/m² Carton board up to a maximum thickness of 2.000 g/m² Corrugated board up to a maximum thickness of 4 mm Equipment: Non-Stop-feeder Lrjdpfxjlyp Emj Aigjr Manual Non-Stop device for the feeder Stripping station including auxiliary pile for Non-Stop delivery Centerline operator platform 1 tool set Machine delivery time: 6-8 month after order