Used Guidetti Cable Granulation Plant + Pre-Shredder for sale (18,189)

Year of construction: 2017, condition: ready for operation (used), Technical specifications will follow! Nwedpfegny Ryox Agxji

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Nwedpfxjzmyvij Agxoi Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: ready for operation (used), Manufacturer: H&G Nedpfxozp Ilqj Agxjwi Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW

Condition: good (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: 400837, For sale is a complete pelletizing system, including a pellet press, hammer mill, cooler, screening system, and filtration technology. Nwjdpozhl Ndofx Agxoi The system is designed for a capacity of approximately 1.5 tons per hour of wood pellets. It was used exclusively for testing purposes and has very low operating hours, approximately 300–400 hours. The system is in good condition and fully functional. Complete granulation line consisting of: - Hammer mill, 55 kW - Pellet press, Münch RMP520, 2 x 75 kW - Countercurrent cooler - Fine screening - Siemens S7 automation system with touch display (control cabinets and electrical/measurement/control/regulation technology) - Fine filter, Nestro system - Total connected power: approximately 250 kW INDIVIDUAL components of the system can also be purchased separately upon request. - Pellet press: €32,000 net (excluding VAT) - Hammer mill: €9,500 net (excluding VAT) - Aspiration system, including Nestro filter: €18,400 net (excluding VAT) - Cooler + fine screening: €12,000 net (excluding VAT) - Electrical/measurement/control/regulation technology, including control cabinets: €48,000 net (excluding VAT) Further details can be provided upon request. Comprehensive technical documentation is available.

Condition: used, Compressed air system with compressed air compressor and compressed air tank - KAESER SK26 screw compressor (built in 2005) - Gebre GmbH compressed air tank with a capacity of 750 litres (built in 1996), standing on 3 feet with pressure gauge. Additional title: air compressor with compressed air tank Nwodpfjw Tbtkjx Agxji Delivery appr.: 2,2 m3/h Max. working overpressure compressor: 10 bar Gross volume compressed air tank: 750 l Max. working overpressure compressed air tank: 11 bar Power: 15 kW Current: 400 V Voltage: 35 A Frequency: 50 Hz Length: 0,8 m Width: 0,8 m Height: 1,03 m Weight: 290 kg Operation / Control: control panel on compressor Base construction: tank vertical on 3 feet Features: air compressor, compressed air tank

Condition: used, Compressed air system with air compressor, refrigeration dryer, activated carbon filter and two compressed air tanks. Capacity: 202 m3/h Operating pressure: 10 bar Features: Air compressor; refrigeration dryer; activated carbon filter; 2 x compressed air tanks. Nsdpfx Aoyzhz Ssgxowi

Condition: used, Year of construction: 2019, Oil-free piston compressor with 90 l compressed air tank and separate refrigeration dryer. Additional title: piston compressor with refrigeration dryer Delivery volume: 0.252 m3/min at 6 bar Max. overpressure: 7 bar Volume pressure vessel: 90 l Nedpsxfquysfx Agxswi Power: 2.2 kW Features: piston compressor with pressure tank, refrigeration dryer

Condition: excellent (used), For sale: used Klauke K18 press. The professional ENERGOTYTAN KLAUKE K18 mechanical press is designed for the toughest electrical installation tasks. Its robust construction, suitable for both indoor and outdoor use, ensures reliable operation Nwjdjw Slkdopfx Agxji

Year of construction: 1999, condition: good (used), functionality: fully functional, Suite arrêt de production, ligne complète de granulation pour matières plastiques comprenant trémie de chargement, vis de chargement, Extrudeuse monovis diametre 105 avec vis forceuse, doseur, puit de dégazage, pompe à vide, filtre à tiroir avec groupe hydraulique, bac inox de refroidissement, sécheur de joncs, granulateur Buhler, tamis vibrant Avitech, soufflerie, cyclone et porte big bag. Vis et fourreau refait en 2021 (facture). Pupitre de commande refait. armoire électrique complète. La vis a un profil généraliste qui permet de regranuler du PE, PP, PS, ABS et PA principalement. Nsdpfju E E Ezex Agxjwi

Condition: refurbished (used), Chamber filter press 1200x1200 Application: gravel works / tunnel construction Number of filter plates: available in different designs and number of plates Filter pressure: 15 bar Nwedpfx Agjrq I Iwjxoi Filter cloths: optional in coordination with the medium Piston diaphragm pump: optional Available: pre-configured from stock or according to customer requirements Condition: refurbished - rebuilt also according to customer requirements

Condition: new, Year of construction: 2026, functionality: fully functional, Alignment press system Push and pull force 24/30 t Hydraulic station 50 m rod Expander 80/132/160/200 mm Without locator device Nwodpfx Agjuy N H Ejxei Price: €27,000.00 net Dry drilling: no bentonite use, no bentonite disposal

Condition: like new (used), The MSP 120 ZK is ideally suited for crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder is composed of a hydraulic chip press paired with an upstream shredder, both perfectly matched to each other. This system enables the crushing and compaction of chips generated during turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolant lubricants (emulsion, oil) absorbed during earlier machining processes. Nsdpfx Agsw R Ranjxjwi The system consists of a feed hopper for loading the material to be processed and a shredder inside the hopper, which reduces chip length. A conveyor system moves the shredded chips continuously and stepwise via a conveyor belt into the chip press hopper. There, two augers feed the material into the compaction chamber. The system is equipped with a monitored liquid collection tank and pump, allowing coolants to be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for the monitoring of the hopper fill level. Optionally, a tipping device can be added for manual loading of the unit. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette diameter: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Number of knife shafts: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Exchangeable knives: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen mesh size: 20 mm Hopper inner diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured paint, RAL 7035 light grey

Year of construction: 2003, condition: used, Bollegraf Hammermühle AS 75/850 year: 2003 power: Nsdpfx Ageg T Id Njxjwi application: feed opening: rotor- Ø: rotorb width: 850 mm price: 24.500 Euro contact: Mr. Rainer Eckerle

Condition: used, Year of construction: 2006, beside the press granulator Tria 20-18 JM 1,5 KW Manufacturer: Tria Type: 20-15 JM Manufacture year: 2006 Power: 1,5 kW Intake: 180x200 mm Rotor knife: 4 Stator knife: 2 Nwedpfxjwiwcbj Agxsi Rotor diameter: 180 mm Rotor width: 200 mm Tria 20-18 JM 1,5 KW year 2006 price: € 1,950 contact: Mr. Rainer Eckerle

Condition: used, Year of construction: 2006, beside the press granulator Tria 20-18 JM 1,5 KW Manufacturer: Tria Type: 20-18 Manufacture year: 2006 Nodpswiwdlofx Agxjwi Power: 1,5 kW Intake: 180x200 mm Rotor knife: 4 Stator knife: 2 Rotor diameter: 180 mm Rotor width: 200 mm Tria 20-18 JM year 2006 price: € 1,950 contact: Mr. Rainer Eckerle

Year of construction: 2006, condition: used, beside the press granulator Hellweg MDS 120/150 1,5 KW Year: 2006 Power: 1,5 kW Application: Feed opening: 150x150 mm No. rotor knives: 3 No. stator knives: 2 Rotor-Ø: 150 mm Rotor-width: 120 mm Price: € 2.750,00 Nodeixt Hlopfx Agxjwi contact: Mr. Rainer Eckerle

Year of construction: 1997, condition: used, Getecha GRS 252 - A10.26 5,5 KW year 1997 knives verygood ! Year: 1997 Power: 5,5 kW Application: Feed opening: 400x400 mm Njdpfx Aeqnulujgxowi No. rotor knives: 10 No. stator knives: 2 Rotor-Ø: 300 mm Rotor-width: 105 mm Price: € 2.950,00 contact: Mr. Rainer Eckerle

Year of construction: 2003, condition: used, Getecha GRS 300 A1.1.1 5,5 KW year 2003 knives like new ! Njdpfoqnul Aox Agxowi Year: 2003 Power: 5,5 kW Application: Feed opening: 300x450 mm No. rotor knives: 10 No. stator knives: 2 Rotor-Ø: 300 mm Rotor-width: 105 mm Price: € 3.450,00 contact: Mr. Rainer Eckerle

Condition: new, Year of construction: 2025, type of input current: AC, power: 5.5 kW (7.48 HP), input voltage: 400 V, Pelleting plant for a wide variety of materials such as wood, miscanthus, agricultural by-products and waste products (hay, straw, maize straw ....) Animal feed ..... This is a complete system (compact system), which is built on a base frame and consists of the following components: Storage container for raw material 1.5 m³, incl. agitator Inclined mixer for raw material incl. level sensors and fully automatic moisture metering Dosing screw for optimum material feed to the press (speed-controlled) Press 5.5 kW, with horizontal round die, discharge chute with dust separation, temperature monitoring Conveyor belt for pellet removal, discharge height approx. 2.0 m The entire system is operated centrally using a Siemens PLC via touch display! In addition, all parameters are permanently monitored so that the system is shut down if a problem occurs! Price excl. VAT! The price includes operator and service training (in A-4352 Klam)! Nwedpfx Ajud Nx Hegxji Attention, some of the pictures do not correspond to the actual system ( are example pictures ) !!!!! Attention!!! we are constantly looking for sales and service partners (worldwide) !!!!!

Condition: like new (used), Year of construction: 2019, Partial area dryers IWT, widely used in the automotive industry, Nwodpfxoxxa Nme Agxsi

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, For sale is a highly efficient, perfectly coordinated recycling combination package from the German market leader WEIMA, consisting of the single-shaft shredder WL 600 and the hydraulic briquetting press C 170. Both machines are of German manufacture (“Made in Germany”) and have operated with absolute reliability. Nedpfx Agjzgq Trjxewi We only used this machine for a short time because the project we had planned, involving deadwood from the natural forest, did not work out. However, this had nothing to do with the machine's functionality. We are sending the machine back to Germany because there is no market for it in Chile. We will add more pictures today of the packaged system, which will begin its journey next week.

Condition: good (used), Cheese whey processing plant 15,000 Litres/Hour Plant consists of:- 250 litre stainless steel tank 15,000 litre/hr product pump complete with 5.5kw motor Tetra plex C8 SR plate heat exchanger SWEP gasketed hot water preparation unit Hot water pump complete with 3.0kw motor Automatic steam on/off valve Steam modulating valve Steam trap & Filter Holding tube Nedpfx Aozdz Nfsgxewi pipping and valving including 3 off x 2" 3 port flow divert valves RTD's for hot water, hot whey & cold whey High level probe for the balance tank

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60 SNG PLUS GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 85kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. A very low transport cost : ONLY ONE CONTAINER/TRUCK The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 700 Concrete Batching Plants to more than 60 Countries all over the world. * LOW SHIPMENT COST(just ONE 40F-OT container or ONE standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 650 lt/min Aggregate Hopper : 4X10 (40 m³ ) Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x12.000 mm. Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Nwedjflz Hdopfx Agxoi Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling. Nwjdpfsx Utd Eex Agxei

Condition: excellent (used), 1 x Oddy Novatek 2 Roll Plant Nodpfx Agsy Hk Daoxjwi