Used Gizelis G-Flex 3140 for sale (36,045)

Condition: new, Year of construction: 2022, functionality: fully functional, type of input current: three-phase, power: 50 kW (67.98 HP), input voltage: 400 V, fuel: domestic gas H, overall weight: 2,200 kg, nominal power: 50 kW (67.98 HP), input frequency: 50 Hz, continuous power: 50 kW (67.98 HP), input current: 72 A, Equipment: documentation/manual, For sale: new and unused 2G g box 50plus combined heat and power (CHP) unit from 2022. This is a 2G Energietechnik g box 50plus, configuration as70 4, suitable for simultaneous generation of electricity and heat using natural gas. The unit has never been put into operation and is in new condition. At full load, the CHP unit delivers 50 kW of electrical power and approximately 104 kW of thermal power. The unit is designed for 400 V and 50 Hz and is equipped with a Liebherr G924 natural gas engine and a Leroy Somer LSAH 44.3 generator. Technical specifications: • Manufacturer: 2G Energietechnik GmbH Bodoz Hngmspfx Aa Ijln • Type: g box 50plus • Configuration: as70 4 • ID number: H1214 • Year of manufacture: 2022 • Electrical power: 50 kW • Thermal power: approximately 104 kW • Rated voltage: 400 V • Rated frequency: 50 Hz • Rated current: 72 A • Weight of CHP module: approximately 2,200 kg • Fuel: natural gas • Electrical efficiency: approximately 34.5 percent • Thermal efficiency: approximately 71.8 percent • NOx emissions: less than 125 mg per Nm³ • Sound pressure level of CHP: approximately 55 dB(A) at 1 meter The offered package consists not only of the CHP module. The installation also includes two Viessmann boiler bodies, one Viessmann Proflame VM IV 3 gas burner, a separate control cabinet, and various flue gas components, fittings, and related documentation. The original new price of the complete installation was approximately €189,000. The installation comes from a project for which it was ultimately not used. The various main components are from 2022 and have been stored without being put into operation. Due to the size and composition of the installation, we advise interested parties to contact us in advance for further technical information, photos, documentation, and an overview of the components available. An inspection is, of course, possible (location: Winterswijk, Netherlands). Loading onto the buyer's transport vehicle is possible on site.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,300 h, functionality: fully functional, power: 55.16 kW (75.00 HP), first registration: 07/2023, Equipment: air conditioning, all wheel drive, car registration, cruise control, hydraulics, 4-cylinder Perkins diesel engine 404J E22TA, 97/68/EC emission stage 5 With 75 hp / 55 kW at 2,800 rpm Cruise control for transport and work mode Permanent hydrostatic all-wheel drive with 2 gear stages (Sweeping mode: 0-19 km/h, driving mode: 0-40 km/h) – 65 liter diesel tank VEHICLE COMPLETELY DISPENSES WITH AD BLUE AND STILL HAS THE LATEST EMISSION TECHNOLOGY STAGE V In addition, the installed engine has camshafts, therefore, a costly timing belt repair, approximately every 70,000 km or 1000/1500 operating hours, is eliminated! Furthermore, please note: · Service interval list with long inspection intervals only every 500 operating hours - Comfort cabin with center seat (1-man cabin) incl. heating - Driver's seat = ISRI health seat with integrated 3-point safety belt Belt guide on the right, stepless backrest tilt adjustment, lumbar support, seat heating Blsdpozdz R Aefx Aa Ijn switch, armrest, seat contact switch, adjustable headrest, automatic adjustment of the seat to the driver's body weight (see also attached certificate) - Air conditioning with ventilation and defrosting system - Radio with Bluetooth hands-free system, USB port, MP3 player - All-season tires 255/65 R 16 incl. fender extensions, M+S - Heated wide-angle side mirrors - Joystick control with 4.3" screen - Sweeping kilometer counter and sweeping hour counter - Reading light - LED work spotlight at the front of the cabin - Suction pipe - Fresh water tanks 200 l incl. filling connection Storz C coupling - External starting device - LED rotating beacon - Warning triangle, vest, first aid kit - Safety warning flashing light for external use - Integrated reversing camera incl. 7-inch color screen - infrared night lighting, Viewing angle approx. 135°, and additionally suction nozzle camera, incl. LED suction nozzle spotlight additionally, switchable - Standard paint RAL 9016 white - Water high-pressure system 160 bar - 11 l/min, incl. 8 m hose and hand lance (already installed) - HD lance with 90° swivel head for comfort cleaning (already installed) - Central lubrication strip block Sweeping material container with 1.5 m³ gross, 1 m³ net according to DIN EN15429-1 container volume - Discharging height sweeping material container 1,660 mm - with cleaning flaps and circulating water level indicator - Container made of high-quality, rust-resistant aluminum 200 liters of recycled water and 200 liters of fresh water Straight steel pipe as central suction Suitable for sweeper, scrub deck and for mowing Multi-purpose separating screen for efficient dirt separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Deflector plate with rubber coating (wear protection) Hydraulic quick-change coupling (Faster coupling), single-lever operation Rear underrun protection Shovel and broom holder Sweeping unit with hydraulic tilt adjustment of the right broom Hydraulic pressure regulation / relief for front sweeper broom, adjustable on the control armrest Sweeping width: 1,190mm to 2,400mm Quick-change suction nozzle Hydraulic coarse dirt flap Mixed bristle pattern Stepless broom speed adjustment 0-150 rpm Dust reduction through 2 spray nozzles per roller brush Automatic collision protection Changes, typing errors, errors and prior sale are subject to change. All information is provided without guarantee. The sale is made without any guarantee or warranty.

Condition: used, Printing width: 600 mm Colors: 4 Chamber doctor blade units: 3 Condition: used Features: • Manufactured by Windmöller & Hölscher (W&H) Blodpfx Aasxpirre Ion • Designed for inline use with bag-making equipment • 3 chambers with doctor blades for precise ink transfer • Compact, robust construction for easy integration • Ideal for retrofitting or adding inline print capability

Condition: used, machine/vehicle number: 006216, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt Premilling Unit: yes Bsdpoy Nk Ahofx Aa Isln Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min

Condition: used, Year of construction: 2015, functionality: fully functional, For filled Berliner donuts, yeast donuts, apple swirls, coated quark balls, and spritz cookies. Bljdpez Auabsfx Aa Isn

Condition: used, PCB handling equipment from E-Flex SMT microsystems: WHM-106SD3TM-Al (2022) price: €6,878 WHM-330SD0TXL-AIR(UXL)C (2023) price: €5,367 WHM-201SDNTM-I (2022) price: €3,832 WHM-201SDNTM-I (2022) price: €3,832 WHM-200SD3TM-I (2022) price: €3,338 WHM-201SDNTM-I (2022) price: €2,899 WHM-201SDNTXL-IA(SD2) (2023) price: €5,739 WHM-200SD3TM-IA (2022) price: €3,439 Bodpfxsx Tzn Aj Aa Ieln WHM-200SD3TM-l (2022) price: €3,738

Condition: new, mileage: 500 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 27,500 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Mercedes-Benz Arocs 2746 6x4 GSR EURO6E with Schwing concrete pump S 36 X *incl. Easy-Flex outrigger system* GSR - turning assistant, lane departure warning, emergency braking assistant, rear-view camera, etc. Mileage: 500 km Color: Arctic white Technical Data * 335 kW * 455 hp * Tire size, front and rear: 315/80R22.5 * Gross vehicle weight: 27,500 kg * Emission standard: Euro 6, E * Transmission: automatic, Mercedes Powershift 3 * Condition: New vehicle Chassis Equipment * Twin-plate clutch * High Performance Engine Brake * M cab Classic Space, 2.30m, tunnel 320mm * Front axle: 7.5t, straight design * Rear axle, differential: 300, planetary: 13.4t * Transmission oil cooler * Tank: 290L aluminum + 60L AdBlue * Sun visor * Air conditioning * Disc brakes, front and rear * ABS + ASR + ESP (Electronic Stability Program) * Driver's comfort suspension seat * Digital radio * Refrigerator * LED daytime running lights * LED fog lights * Multimedia cockpit, interactive, with navigation and Bluetooth * Interface for fleet management system (FMS) * Truck Data Center 8 * Lane keeping assist * Attention assist * Traffic sign recognition * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Cruise control Superstructure Equipment * Schwing S 36 X concrete pump, 36m * Number of joints: 4 * Delivery line: Super 2000 DN 125 * Vertical reach: 35.30m * Horizontal reach from turntable: 31.30m * Placing boom: 36R * Pump type: P2023-110/75 * Theoretical concrete output: 161 m3/h * Vector control system * Slide system: M-Rock * Electric vibrator on hopper grid * Swivel range: 2x 365° * Outrigger system: Easy-Flex, CE * Filling height: approx. 1350mm * Hydraulic drive, max. V: 636 l/min. * Delivery cylinder diameter: 230mm * Water tank: 420l, roller water pump * Remote control: Schwing Control 30 Blodpfxew Nunte Aa Ion * Oil cooler * MPS control system Technical Specifications * 335 kW * 455 hp * Front + rear tires: 315/80R22.5 * Total weight: 27,500 kg * Emission class: Euro 6, E * Transmission: automatic, Mercedes Powershift 3 * Condition: New Chassis Equipment * Twin-plate clutch * High Performance Engine Brake * M cab Classic Space, 2.30m, tunnel 320mm * Front axle: 7.5t * Rear axle: 13.4t * Transmission oil cooler * Tank: 290L aluminum + 60L AdBlue * Sun visor * Air conditioning * Disc brakes, front + rear * ABS + ASR + ESP (Electronic Stability Program) * Driver's comfort seat * Digital radio * Multimedia cockpit, interactive, with navigation and Bluetooth * LED daytime running lights and LED fog lights * Refrigerator, on engine tunnel * Lane assist * Attention assist * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist * Rear-view camera * Cruise control Superstructure Equipment * Schwing S 36 X concrete pump, 36m * Number of joints: 4 * Pipes: Super 2000 DN 125 * Vertical reach: 35.30m * Range from turntable: 31.30m * Placing boom: 36R * Pump type: P2023-110/75 * Theoretical concrete delivery rate: 161 m3/h * Control system: Vector * Slide system: M-Rock * Electric shaking system on hopper grid * Swivel range: 2x 365° * Support stand system: Easy-Flex, CE * Filling height: approx. 1350mm * Hydraulic drive, max. V: 636 l/min. * Conveying cylinder: 230mm * Water tank: 420l, roller water pump * Control system: Schwing Control 30 * Oil cooling system * MPS control system Non-binding offer EXW Cologne. Intermediate sales and errors excepted. Sale to businesses only.

Condition: used, mileage: 211,000 km, power: 169 kW (229.78 HP), first registration: 11/2016, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: orange, gearing type: automatic, emission class: euro6, loading space volume: 4 m³, Year of construction: 2016, Equipment: ABS, electronic stability program (ESP), Manufacturer Mercedes Model Atego 1223 4x2 Euro 6 Cityflex 204 Year 2016 Condition Good Serial Number WDB96702810079651 Ref. nr. 747935 Reg. date: Last seen: Hk: 230 Km: 211000 Gearbox: Automatic Eurotype: 6 Diesel tank: 1 Bjdpfx Ajzvudaja Ijln Tank liter: 200 L Rear view camera: ? Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 245/70R17,5 Cover% left 30 - 70 % Front suspension: Springs Suspension rear: Air Wheelbase: 3620 mm Toolbox: ? Hydraulic system: ? Total weight: 11990 Kg Net weight: 7080 Kg Load capacity 4910 Kg Manufacturer: Hvidtved Larsen CityFlex 204 Tank capacity: 4000L High pressure pump: Uraca P3-10 High pressure capacity: 127 l/min - 160 bar High pressure pump hours: 403 High pressure hose: 3/4" 50m + 1/2 60m Vacuum pump: Jurop RV 360 Vacuum capacity: 10,200 l/min Vacuum pump timer: 335 Vacuum hose: 4" Bottom suction + 3" Top suction Remote control: ? Water heater: Webasto Thermo 50

Condition: used, machine/vehicle number: 008160, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Bljdoxqm Iyjpfx Aa Ion Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 14 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: excellent (used), A complete furniture production plant, composed of the following main machines: Blodpfx Aszwk Idsa Ijn 293000) “HOMAG” KFL flexible Sizing-Milling & Edge Banding line (with HIGH-PERFORMANCE PAKET) 239100) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex with CELASCHI splitter 239000) Flexible CNC Drilling Line “MORBIDELLI+MAHROS” PowerFlex 238000) Flexible CNC Drilling Line “MORBIDELLI+MAHROS+RBO” Flexa 912 238400+200027) 2 x Flexible CNC Drilling Lines “MORBIDELLI+MAHROS” Author 912/924 231200) Flexible CNC Drilling Line “COMEC+KUKA” Frontal for front doors (of furniture) 214000) Digital Printing Line “PROJECTA+GIARDINA+UNIVERSAL+KUKA” 200002) Laminating (coating) Line “HYMMEN-KONTRA” 200037) Production Line “OMGA+BALESTRINI+GANNOMAT+DOUCET” for cabinet front doors/drawers (5 pieces) 200006) “HOLZMA” panel saw, Mod. HPL 400/43, with KUKA robot for unloading and stacking 237100+237200) 2xCNC machines “BIESSE” Skipper 130 CNC+237000+200028) 2x“BIESSE” Skipper 100 237300+200078) 2 x CNC machines “MORBIDELLI” CX 200 + CX 210 CNC machines 200034+200033) 2 x CNC drilling and dowel inserting machines “KOCH+BIESSE” Sprint PTP + HELIX K3 200029 + 200030) 2 x CNC Nesting machines “BIESSE” Rover A FT 1531 CNC (1 with loading and unloading) 200031A + 200032A) 2 x CNC machines “BIESSE” Rover B 1967 Edge (with KUKA robot) 200035) CNC machine “BIESSE” Excel (4 vertical electric spindles) for cabinet front doors 220700) Edge Banding machine “HOMAG” KAL 330 (with LIGMATECH workpiece return system) 200009+200010) 2 x Edge Banding machines “SCM” STEFANI XD (1 with workpiece return system) 200018+200019) 2 x Edge Banding machines “HOMAG-BRANDT” KDF 440 C and KDF 650 261200 + 261300) 2 Cardboard Packaging Lines “DYNATEC+ROBOPAK+KUKA” 2VAC01 + 2VAC02) Extraction systems (AIREX, TECO Westinghouse, Ingersoll-Rand) And many other machines (various ATLAS COPCOM and INGERSOLL RAND compressors, HOMAL KL/KR edge banding machines, HOLZMA and SELCO panel saws, ROBOPAC packaging machines), as well as roller conveyors, shelving, etc. The machines are still installed at the former owner’s premises and can be viewed by appointment.

Condition: good (used), Year of construction: 2021, REF: MM6468 1 x MKN FlexiChef 150L high-performance multifunctional cooking pan. Suitable for soups, stews, ready meals, meat, fish, rice and pasta, bakery and confectionery products. Bsdpjzn Rbfsfx Aa Isln Manufacturer - MKN Maschinenfabrik Kurt Neubauer GmbH & Co KG. Type - FCEKMP133DR-G20037. Serial number – 21542551. Date of manufacture – 2021. Electrical requirements - 380-415 V / 50 hz / 3 phase. Power - 34 kW. Water pressure - 200-600 kPa. Overall dimensions - 1600mm long x 910mm wide x 1020mm high. Machine weight - 390 kg.

Condition: ready for operation (used), functionality: fully functional, working height: 60 mm, TECHNICAL DETAILS Max. panel height: 60 mm PVC/ABS edge height: 3 mm MACHINE DETAILS Power-Touch control: 21" full HD display EQUIPMENT - Anti-adhesive unit - Twin-motor corner copying unit - Roll holder plate - EVA glue application unit with pre-melter and glue pot - Edge pressure unit for straight profiles with pressure rollers - End trimming saw unit with automatic swivel adjustment - Double-motor beveling unit with adjustable setting - Double-motor multifunctional rounding unit (beveling + rounding) - Working height electronically adjustable via NC control - Workpiece support guide with idler rollers - Side roller conveyor with free-running wheels - Edge scraper unit - Glue scraper unit - Brushing unit Blodpfx Aaeyzm R Se Ien External reference: MMG013

Condition: like new (used), Year of construction: 2020, Donau Flex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Type: Flex 135 High-Speed Radial Drilling Machine Condition: used, very good to like new Year of manufacture: 2020 Stepless speed control Stepless quill feed Threading device Dimensions and travel ranges Tool holder: MK 4 Column diameter mm: 170 Table dimensions mm: 1200 x 600 Number of T-slots: 4 Distance between T-slots mm: 125 Quill stroke mm: 165 Column stroke mm: 450 Drilling capacity in solid steel 60 mm: 35 Cast iron 22 mm: 42 Threading steel 60 M 30 Bedpfx Aozza Nxsa Ieln Cast iron 22 M 36 AC motor, frequency-controlled kW 4.0 at 100% duty cycle. Speed range: min-1 20 – 3200 Feed, stepless mm/rev: 0.02 – 0.7 Machine light Spindle guard

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S Blodpoyq Ufnsfx Aa Ijn * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h * Raise/lower via EBS modulator control * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-chamber tail lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with the rear * 9-ton Valx axles with disc brakes Ø 430 mm * Rims ET 120 * Automatic lift axle on the first axle, * Operable via a switch on the chassis, or by actuating the service brake three times * With traction support, load increase on the 2nd and 3rd axle up to 130% below 30 km/h * Lifting / lowering controlled by the EBS modulator * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres as per manufacturer’s choice, with tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized container guides at the front * Upper side of the frame spray galvanized * Paintwork: 1 coat, 2K RAL 9005, matte Blodeyq Ufuepfx Aa Ien * 15-pin connector * Flashing side marker lamps * Multichamber rear lights

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Blsdpfxew Ighis Aa Isn Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: used, Year of construction: 2020, Star SB-20R Type G CNC Sliding Head Lathe with Fanuc Series Oi-TF CNC Control, 5 Axis Machine, Twin Spindle Collet Chucks, 16 Tool Positions, up to 7 Turning Tool Positions, 4 Sleeve Tool Positions, 5 Driven Tool Positions, (5 Spindle Cross Drilling Unit ER11/16 0M151), 20mm Max Work Piece Diameter, Main Spindle Speed 10,000rpm, Sub Spindle Speed 9000rpm, Fire Trace Automatic Fire Suppressant System, Parts Catcher & Conveyor. S/No. 7009 (0374) (2020), 1750kg with FMB Micromag 20 6 meter Barfeed. Country of Origin: Japan Blsdpez Armxofx Aa Ien Location: These lots are located in Biggleswade, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, mileage: 854,993 km, power: 220 kW (299.12 HP), first registration: 05/2009, fuel type: diesel, number of seats: 49, gearing type: automatic, next inspection (TÜV): 03/2027, emission class: euro5, color: white, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until a contract is concluded, subject to errors, typographical errors, and prior sale: Mercedes Benz Citaro O530 G 18m (49+101+1+2 emergency seats) (Vehicle 736) Registration date: 05/29/2009 854,993 km Engine: 11,967 ccm 220 kW / 300 hp Euro 5 EEV MOT valid until 03/2027, technical inspection valid until 09/2026 Permissible total weight: 29,000 kg, unladen weight: 16,780 kg, payload: 12,252 kg Overall length: 17,940 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approximately 90%, center approximately 50/50%, rear approximately 90/90%, rear approximately 60/60%, rear inside approximately 40/40% Double doors at the front, middle, and rear Driver's cab with door Ramp, 2nd double door Retarder activated via the brake pedal Fully automatic transmission Microphone Manually operated windows 2 x electric and heated mirrors Auxiliary heater + 2nd heater LAWO system via cash register ISRI driver's seat with heating + ventilation 49+101+1+2 emergency seats Emergency exit 12-volt socket Frame with some signs of rust 06/26/2024: Tie rod on the right side replaced 08/06/2024: Door 3 pressure wave switch replaced 12/16/2024: Alternator belt tensioner replaced, front axle brake pads + discs replaced, C-axle brake pads replaced, right-hand side C-axle caliper guide + combination cylinder replaced, left-hand side C-axle brake cylinder replaced 01/28/2025: Coolant expansion tank replaced 06/20/2025: Cylinder 1 exhaust manifold screw replaced 12/03/2025: Hose to the water pump replaced, steering hose replaced 12/16/2024: Diagonal arm on the left C-axle replaced 12/12/2025: Right-hand side C-axle position sensor + bracket replaced, ECASD calibrated 12/03/2025: Tie rod on the left side replaced, air spring on the B-axle right front + air spring on the C-axle left rear replaced, B-axle left and right brake caliper guide and brake pads replaced 06/06/2026: Axle trunnion cover on the front axle left upper replaced Various signs of wear and tear, consistent with age Last inspection on 03/06/2026 at 840,000 km, next inspection at 900,000 km, next inspection at Price: 10,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. For both parties, the place of jurisdiction for disputes up to a value of €10,000 is the district court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typographical errors, and prior sale. Blodpfxez H Ed As Aa Ijn

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, power: 25 kW (33.99 HP), workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, feed rate X-axis: 18 m/min, Equipment: CE marking, TECHNICAL DETAILS Minimum panel height: 8 mm Maximum panel height: 60 mm Minimum edge thickness: 0.3 mm Maximum edge thickness: 12 mm Maximum feed speed: 18 m/min Sequence of work steps: Section 1 Work step: Positioning Motor power: 2.5 kW Automatic control Edge preheater Glue tank Glue preheater Roll magazine Section 2 Work step: Cutting Number of motors: 2 Bljdpfxeytr Rgj Aa Ien Section 3 Work step: Edge milling Number of motors: 2 Motor power: 0.55 kW NC positioning Section 4 Work step: Corner rounding Number of motors: 2 NC positioning Section 5 Work step: Milling Number of motors: 1 Motor power: 3.5 kW Section 6 Work step: Edge scraping Section 7 Work step: Glue scraping Section 8 Work step: Brushing Number of motors: 2 MACHINE DETAILS Total power: 25 kW EQUIPMENT Panel support guide Spraying unit Control with more than 20 control systems CE marking The machine is sold and delivered in its actual and legal condition ('as seen and agreed'), based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6216

Condition: good (used), Year of construction: 2013, operating hours: 12,110 h, functionality: fully functional, Channel baling press Paal Konti 325 G, year of manufacture 2013 Technical data: Manufacturer Paal Type Konti 325 G Year of manufacture 2013 Operating hours 12,110 Pressing force 100 t Drive power 2 x 55 kW Feed opening 1020 x 1750 mm Bledsz A T N Eepfx Aa Ijn Bale dimensions 750 x 1100 mm, length variable Tying 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (L x W x H) Machine weight approx. 28,000 kg Materials: Paper, cardboard, light waste, plastic waste Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, mileage: 84,675 km, power: 104 kW (141.40 HP), first registration: 11/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,640 mm, fuel: diesel, CO₂ emissions: 295 g/km, fuel tank capacity: 75 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, loading space length: 3,650 mm, loading space width: 2,130 mm, loading space height: 2,220 mm, Year of construction: 2022, Equipment: ABS, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, hill-start assist, navigation system, onboard computer, power assisted steering, power mirror, start-stop system, tail-lift, traction control, = Additional options and accessories = - Automatic low beam headlights - Heated exterior mirrors - Passenger airbag - Passenger bench seat (3SJ) - Electric windows, front - Euro 6 - Driver airbag - Remote central locking - Height-adjustable driver's seat - Height-adjustable steering wheel - Comfort seats - Cornering lights - Lumbar support - Front center armrest - Fog lights - Radio - Radio with DAB - Rain sensor - Immobilizer - System to prevent secondary collisions - Thermally insulated glass - Windshield heating = Further information = Availability Reserved: This vehicle is reserved for a customer (subject to sale). General information Number of doors: 2 Model range: Sept. 2022 - Aug. 2024 Cab: single Technical information Torque: 360 Nm Number of cylinders: 4 Engine displacement: 1,968 cc Top speed: 149 km/h Dimensions Length/Height: L3 Weights Unladen weight: 2,542 kg Bledpfxjza E Ire Aa Ijn Payload: 958 kg GVW: 3,500 kg Functional Tail lift: Dhollandia DHLM.08, tailgate, 750 kg Interior Interior: black Consumption Average fuel consumption: 7.1 l/100km Fuel consumption in urban areas: 8.1 l/100km Fuel consumption outside urban areas: 6.6 l/100km Maintenance, history, and condition Number of owners: 3 APK (technical inspection): valid until 06.2027 Number of keys: 2 (2 remote controls) Financial information VAT/differential tax: VAT deductible Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: good (used), Year of construction: 2020, operating hours: 731 h, functionality: fully functional, machine/vehicle number: WSVT4H7RSL1500083, power: 55.16 kW (75.00 HP), first registration: 09/2020, fuel type: diesel, color: orange, tire size: 255/65 R16, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, Equipment: additional headlights, hydraulics, Model designation: Aebi Schmidt Multigo 150 Year of manufacture: 2020 Serial number: WSVT4H7RSL1500083 Tyres: Wide tyres 255/65 R16 Operating hours: 731 Application areas: Winter service, street cleaning, sidewalk cleaning, and more. - 40 km/h road speed - Front-mounted lift with hydraulic floating position control - Perkins 4-cylinder engine (75 hp) - ISRI air-suspended driver's seat - Heated side mirrors - Rear area monitoring with infrared night vision camera + monitor - Additional LED work lights - 1.5 m³ aluminium debris hopper with recirculating water system - Sweeper unit: 2-brush system (trailing) with suction shaft - 4 m hand suction hose - Stratos S 06 salt spreader (0.6 m³) - Spreading disc with adjustable spreading width from 2–6 m - Snow plough EN15 with 1.5 m working width - Trade-in and purchase of vehicles and machinery possible. - Sales price excludes transport and delivery. - No liability for printing & typographical errors. - Subject to errors, alterations, and prior sale. - Offer subject to change. - All information without guarantee. - No warranty for material defects on used vehicles/equipment. Henne Nutzfahrzeuge GmbH Authorized Mercedes-Benz Unimog general representative JCB sales and service partner Blodpfx Aaoyilbno Ion Hans-Grade-Straße 2 04509 Wiedemar Marlon Schütz Sales municipal special equipment

Condition: used, functionality: limited functionality, Year of construction: 2018, operating hours: 16,914 h, load capacity: 4,000 kg, lifting height: 4,040 mm, fuel type: gas, mast type: duplex, construction height: 2,855 mm, empty load weight: 6,300 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,040 mm Load capacity: 4,000 kg Load center: 450 mm Fork width: 150 mm Fork thickness: 50 mm Fork length: 950 mm Fork carriage width: 1,350 mm MACHINE DETAILS Mast type: Duplex Drive type: Internal combustion engine Power: 42 kW Blodpfez Hvmnox Aa Ijn Speed class: 15 ISO class: ISO class 3 = 2,500–4,999 kg Front tires Tire type: Non-marking Outer diameter: 450 mm Tire width: 200 mm Tire condition: 0–20 % Rear tires Tire type: Non-marking Outer diameter: 680 mm Tire width: 255 mm Tire condition: 0–20 % Battery voltage: 12 V Battery type: Starter Battery year of manufacture: 2018 Unladen weight: 6,300 kg Overall length: 2,190 mm Overall width: 2,050 mm Operating hours: 16,914 h EQUIPMENT 3rd valve Rear work light Front work light Heater Full cab Air conditioning CE certificate Non-marking tires Seat heating 3-wheel design Seat Two-way catalytic converter 55-liter gas tank with indicator Blue Spot Large alternator, 90 A Air-suspended seat Footwell heater Note: The rear wheel motor is leaking.

Year of construction: 2016, condition: excellent (used), High throughput twin lane tray sealer. Has been packing layered salads in round bowls. Cost in excess of £300k when new in 2016. Bedpfx Ajilfkgsa Ioln

Condition: used, Year of construction: 2012, input voltage: 400 V, input frequency: 50 Hz, number of slots in tool magazine: 8, Equipment: CE marking, Biesse Klever 1836 G FT CNC machining centre Description Technical data: Working field: X = 3811mm, Y = 1876mm, Z = 150mm Axes stroke: X = 4201mm, Y = 2016mm, Z = 260mm Maximum axes speed: X = 22.5m/min Y = 22.5m/min, Z = 12.5m/min Safety devices in conformity with the basic safety requirements of the regulation 2006/42/CE Presetting device for contact measurement of tool length with measuring plate diameter 80mm Automatic lubrication system Side rack toolchanger on machine's base frame - for HSK F63 or HSK F50 tools Toolchanger capacity: 10pos. Vacuum locking system - Klever 1836 G FT Work table with prearrangement for vacuum and electrical connection for vacuum pumps. Division of the table in 6 independent vacuum zones with automatic selection. 2 x 300 m3/h rotary claws vacuum pump BH 5 boring head can be equipped with up to 5 independent tools for single and multiple borings on panel's top surface. The head is composed of:· 5 independent vertical spindles with a pitch of 32 mm placed along X HSK F63 Electrospindle – 9.0 kW (12 Hp), air cooled in replacement of the one included in the base machine configuration - Inclusive of the 2 nozzles air blower - Inclusive of the electrical and pneumatic pre-arrangement for the BH5 boring head Pre arrangement for tool lubrication system Inclusive of: - X axis cable-holder chain closed version in replacement of the standard one included in the base machine configuration - Mechanical, electrical and pneumatic prearrangement for tool lubrication system Software update from BiesseWorks Basic machine to BiesseWorks Advanced machine BiesseNest Bodezqt Erepfx Aa Ieln (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland