Used Gebhardt Anlagentechnik Gmbh & Co. Kg Td33 for sale (100,469)

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 106357-11, total length: 3,140 mm, total width: 1,800 mm, total height: 2,470 mm, overall weight: 3,500 kg, type of input current: AC, input voltage: 400 V, The machine was equipped with a new machine control system in 2024 and underwent a complete mechanical overhaul in 2025. The extensive overhaul involved the replacement of almost all essential components. As a result, the machine is in almost new condition technically. New control system in 2024: - SIMATIC S7-1500 PLC control system - SINAMICS S120 drive system Mechanical overhaul in 2025: - New tailstock housing, drill bush holder, and spindle housing - New workpiece support and tool support - 2x high-frequency spindles - 2x tool holders - 2x rotating collet chucks - Quill, including bearing - Ball screw drive, including bearing - Linear guides - Radial piston pump - Water cooler - 2x drilling oil supply - Flow divider - Pipelines and hoses replaced - Various filters replaced - Complete repainting Optional: - Chip conveyor can be retrofitted Oil mist extraction: - Connections are available Tool accessories: - Individual design possible according to customer requirements/customer workpiece. The deep hole drilling machine uses the single-lip drilling process. Information on the drilling unit: - Drilling diameter min/max: 1-12 mm based on ST 60 - Drilling depth: approx. 400 mm - Number of spindles: 2 - Spindle spacing: 120 mm - Spindle drive: 2 x 3.5 kW - Spindle speed, continuously variable: 1000 - 20000 1/min - Feed rate, continuously variable: 10 - 15000 mm/min - Rapid traverse: 15000 mm/min - Slide stroke (nominal): 800 mm - Center height (above table): 100 mm - Coolant supply: Deep hole drilling oil Machine frame: - Welded construction with integrated coolant tank - Top of the frame with continuous linear guide rails Spindle unit: - Motor spindles with frequency-controlled, continuously variable speed control. - Spindle head with connection for tool holder. Drill bush holder: - In cast design, fixed on the machine bed. - Holder for tool guidance system with Ø50 mm - Holder for sealing housing and immersion sleeves with bayonet lock Rotating tailstock: - With drive for rotating workpiece - Clamping quills with workpiece length compensation Iodpfx Ajz Irfvsfujih Inspection of the machine and further information are available on request.

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool Ijdpfx Afewgc I Reujih • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, Year of construction: 2026, functionality: fully functional, Blasting container, 40 ft, with 9 m blasting chamber, screw conveyor floor (very low maintenance), blasting media preparation, and filtration system. Chamber dimensions (internal): approx. length = 8850 mm, height = 2485 mm, width = 2250 mm. Option: width including widening = 3240 mm. Transport height: approx. 3000 mm. Floor height: approx. 440 mm. Iedpezbztaefx Afueih Options: - Side container opening for 9 m and 3 m machine room - Side extension for widening the blasting chamber - Crane roof opening (not possible with side opening) - Crane track, 500 kg and much more upon request.

Condition: ready for operation (used), Year of construction: 2001, functionality: limited functionality, For sale is a Fischercope H100C XYp micro-/nano-hardness testing system by Helmut Fischer (year of manufacture: 2001). The device was last used in a laboratory, but is currently not fully functional and is therefore expressly sold as defective / for repair or as a source of spare parts. Known issues: - Table advance movement does not function correctly (the table is positioned under the measuring head, not under the microscope – precise measurement is currently not possible). Likely an electronic issue. - The measuring table moves independently to the left – possibly a joystick failure. - Indenter change does not work correctly (the probe does not move fully to the end stop). Iijdoyu Nabepfx Afush Therefore, the device is particularly suitable for: • Repair by individuals with electronics expertise • Sourcing of spare parts • Research / hobbyists The optical condition is good for its age.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm Iiodpswh Rp Esfx Afueh - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, Year of construction: 2016, refrigerant: ammonia Additional title: room cooling Volume: 10 l Iiodpozty Ewefx Afuoh Permissible pressure: 32 bar Permissible temperature: 150 °C Rotation speed fan: 1400 rpm Features: refrigerant: ammonia, 1 fan; control cabinet with temperature control

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Two separate units are for sale. Both units were acquired at the beginning of 2020. Unit 1: - 4.0m suction slit channel AS 590 made of aluminum with neoprene lip seal - 1 piece connection flange DN 315 - 1 piece suction hose carriage Rollfix and central flange for hose DN 250 Price: €450 excl. VAT. Unit 2: - 10.0m suction slit channel AS 740 made of aluminum with neoprene lip seal - 1 piece connection flange DN 355 - 1 piece suction hose carriage Rollfix and central flange for hose DN 300 Iijdpezuwcvefx Afuoh Price: €1120 excl. VAT.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, paper width (min.): 2,100 mm, paper height (max.): 120 mm, total length: 3,300 mm, total width: 3,500 mm, total height: 2,100 mm, Bürkle LFC 2100 Liquid Coating System Object: Ijdpfxjy Szwue Afujih For liquid coating of digitally printed media. Suitable for applying primers or protective coatings, as well as for the full-surface finishing of digitally printed media in a continuous process using solvent-free UV coatings and direct coating curing using UV radiation from above. Condition: Like new (date of purchase 2023) Availability: Immediately Brief Description For sale is a high-performance coating system from Bürkle, model LFC 2100. The machine was acquired from the company Welte in 2023 and has only been in operation for a few hours since then. It is in excellent optical and technical condition (demonstration condition) and offers a first-class solution for UV finishing of large-format prints. The machine also includes a cleaning or washing unit with extraction, as well as a second roller (smooth roller). Technical Data & Highlights Maximum working width: 2,100 mm Substrate thickness: Flexibly adjustable up to 80 mm Throughput speed: Continuously adjustable (up to 25 m/min) Drying: Includes a powerful UV drying unit (TRUV) for immediate further processing Control: Modern control panel for precise process control Asking price €150,000 (negotiable) plus VAT | ex works (EXW) Contact & Inspection The system is still assembled and can be inspected and tested on site after prior appointment. (Location: St. Martin bei Lofer, Austria)

Year of construction: 2021, operating hours: 60 h, condition: good (used), functionality: fully functional, machine/vehicle number: X620DM-WL, We are selling a very good endoscope. As plant engineers, we used the device for endoscopic inspection of weld seams in piping systems. It delivers excellent image quality and is very easy to operate. Unfortunately, the 2-meter probe length is no longer sufficient for our needs, so we need to sell it and purchase a new one with a longer probe. The device is only 3 years old. Details from the order confirmation: Portable Video Endoscope VTec X Series Forward or side view, white light State-of-the-art CMOS camera technology Bright high-resolution 5.5" monitor integrated into the handset Specifications: Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: White light Front LED, 3.22 lm Side LED, 6.45 lm Camera resolution: Front: 1280 x 960 pixels Side: 1280 x 960 pixels Monitor resolution: 1920 x 1080 pixels Iodpfx Afeu Ul A Njujih Bending angle: ≤ 150° ±10 Bending functionality: Controlled via 4-way motorized joystick Power supply: Four Li-Ion batteries (18650) with protection circuit or via power adapter Environmental conditions, protection class, and weight: Handset: -10°C to +50°C, IP 54, 1.50 kg Probe: -20°C to +70°C, IP 67 Included in delivery: Video Endoscope VTec X620DM-WL SD-USB card reader HDMI cable Mini USB data cable including USB power adapter Battery charger including power adapter Power adapter Four Li-Ion batteries (18650) with protection circuit User manual Transport case Rigid Shaft Adapter with Handle for 6 mm Video Endoscopes Working length of shaft: 350 mm Includes mount for 1/4" tripod thread

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, load capacity: 4,000 kg, lifting height: 10,000 mm, battery voltage: 48 V, empty load weight: 9,000 kg, General information: The HUBTEX 2125-PU/SO with model MQ 40 is an electric multidirectional sideloader with a load capacity of 4 tons and a cross-seat cabin. This forklift is suitable for warehouse areas where maximum flexibility and maneuverability in narrow aisles are required to handle loads of up to 4000 kg. M = Multidirectional steering Q = Cross-seat cabin Iedpfjx Aqaqex Afuoih 40 = 4,000kg 2125 = Series PU = Vulkollan tires SO = fork tilting and lowering, extendable forks to 1500mm, hydraulic fork width adjustment Additional equipment/modifications: - Camera system on the right and left of the forks, with monitor in the cabin - Positioning lasers on the right and left of the forks - Soft-stop feature when lowering the forks and when crossing the telescopic fork extension steps

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Iiodpfx Afew Ivk Tsuoh Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) 1x Filter unit with pre-chamber separator 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - 500kg crane runway - C-profile rail for powder coating - Blasting trolley - Filter with big bag - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor and much more upon request!

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080100,

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 10,600 mm, laser power: 60 W, type of cooling: air, total width: 800 mm, total height: 1,800 mm, total length: 1,700 mm, working range: 1,200 mm, warranty duration: 6 months, height adjustment type: electric, table height: 7,000 mm, table length: 4,000 mm, Equipment: cabin, Used CO₂ laser system for marking, engraving, and cutting plastics, wood, acrylic, paper, and more. Refurbished, 6-month warranty, Made in Germany. Technical Specifications - Laser source: CO₂ laser, beam source refurbished in 2023 - Peak power: 60 W - Wavelength: 9,600 nm - Cooling: air cooling - Power supply: 230 V / 50 Hz - Scanner & optics - X-Y galvo scanner with mirror mount - F-theta lens: F = 200 mm, anti-reflective protective glass - Working area: 120 × 120 mm (other lenses available on request) Machine & Work Area - Fully enclosed workstation - Dimensions (W/H/D): 910 × 255 × 200 mm - Extraction port available (extraction system not included) Control & Software - Industrial PC Marking software: Isdjyfucvspfx Afujih - Texts, logos, variable data - Import of DXF, PLT, WMF, bitmap - Intuitive, user-friendly interface Scope of Delivery & Safety - Complete machine, workstation - 6-month warranty - CE certified, TÜV-tested Condition & Delivery - Refurbished, technically tested Offer valid ex works plus shipping, while stocks last

Condition: new, empty load weight: 9,600 kg, Year of construction: 2026, Gas tank semi-trailer for CO2 Carbon dioxide New gas tank semi-trailer for CO2 Carbon dioxide Manufacturer: CRYOBASE GmbH Iedpfxoymza De Afusih Volume 23 m3 Working pressure 22 bar Pump Tare weight 9600 kg First registration: year 2026 We also have other tankers for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, LNG, Hydrogen, Methane. We will be glad to answer your questions via Phone and E-mail

Condition: used, Year of construction: 2024, machine/vehicle number: 211-11-01-23-02, total width: 1,070 mm, total length: 2,470 mm, total height: 1,850 mm, This E-bike motor test bench, type G4, manufactured in 2024 by EMEC Prototyping GmbH, will be auctioned off in our online auction "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, accessories." Further details: E-bike motor test bench EMEC G4, manufactured in 2024 Test bench for e-bike drives with two test levels in an aluminum profile enclosure with safety doors, including a mounted control cabinet and temperature control unit. According to the nameplate: Manufacturer: EMEC Prototyping GmbH Type: Motor test bench G4 Year of manufacture: 2024 Electrical power: max. 16.6 kW Connection power: 3Ph~ 400 V / 32 A Dimensions (L x W x H): 2470 x 1070 x 1850 mm Weight: 1200 kg, permissible total weight: 1350 kg As far as can be seen (information without guarantee): Both test levels appear to be constructed identically, per level: Iiodpfx Afjz Ngzcouoh Beckhoff servo motor AM8064-0R1A-0000 (11.5 kW, 49.7 Nm, 3000 rpm) with gearbox and Beckhoff air cooling kit Second servo motor with gearbox and fan unit, design presumably Beckhoff AM8053 (nameplate not visible) 2 torque measuring shafts Test specimen mounting with ring holder on a carriage Linear guides with clamping levers for axial adjustment Heat exchanger behind the test specimen mounting Fan for test specimen cooling Connections for CAN, service, and auxiliary voltage (AUX) Additionally: Julabo 1200F refrigeration circulator with touch control unit Laboratory power supply EA-PS 9080-100 Control cabinet (as far as can be seen): Emergency stop, main switch, on/off button, front connections USB and RJ45, control cabinet fan Rollers and adjustable feet All information without guarantee. The technical specifications were determined based on nameplates and visual inspection. The actual condition, as inspected, is decisive. Functionality not tested.

Condition: used, Year of construction: 1981, Insulated and clad stainless steel pressure tank with various fittings. Additional title: insulated tank Capacity: 12800 l Pressure: 4 bar Temperature: 20 °C Length: 5,1 m Width: 2,1 m Weight: 2000 kg Material: stainless steel Position: hozizontal Iiedpfeztyy Uox Afuoh Features: insulated and cladded, outlet DN65, manhole, 2 spray heads

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 2080082,

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 2080092, Used CNC horizontal 5-axis twin-spindle double-table machining center Manufacturer: SW – Schwäbische Werkzeugmaschinen GmbH Type: BAW06-22 Year of manufacture: 2011 Machine No.: 2080092 Weight: approx. 16,000 kg Technical data: - CNC horizontal machining center - 5-axis design - Twin spindle - Double table - Travel ranges: - X-axis: 600 mm - Y-axis: 600 mm - Z-axis: 510 mm - Rapid traverse: up to 45 m/min - Tool interface: HSK-A63 - Spindle speed: up to 17,500 rpm Equipment: Machine with standard accessories. Availability: Available in the short term. Iiedpoz E Ddfjfx Afueh

Condition: ready for operation (used), A Maka 5-axis CNC machining center for aluminum, plastic, or wood in need of repair is offered. Travel path X/Y/Z: 2500mm/1500mm/650mm, max. fixture height: 180mm, rapid traverse X/Y/Z: 60m/min, C-axis rotation: 540°, A-axis swivel: +/-98° (196° total range), number of work tables: 2, table size per table: 2500mm x 1500mm, magazine capacity: 20 tools per magazine, total tool positions: 2x20. The drive motor of the Z-axis is defective. Inspection possible by appointment. Iedpfx Ajzcyq Hefueih

Condition: new, Year of construction: 2025, Abrasive blasting cabinet DSK 1102 S with trolley and rotary table. Width: 1500mm, Depth: 1235mm, Height: 995mm Ijdpfxsdhl Ngj Afujih Lift-up door, pneumatic. If you have any questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contact persons.

Condition: new, Year of construction: 2026, Four-axis controlled shot blasting booth for cleaning die-casting molds, steel rings, permanent molds in aluminum casting, tire molds, press dies, and more. The travel path of the blasting nozzles is freely programmable. 2 automatic nozzles and 1 manual blasting nozzle for subsequent cleaning of the parts. Hardox rotary table and conveying screw for long-lasting operation of the blasting system. For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contacts. Iisdpfxedrtano Afueh

Condition: used, Year of construction: 2025, machine/vehicle number: 211-11-07-25-10, total width: 1,070 mm, total length: 2,500 mm, total height: 2,050 mm, This E-bike motor test bench, type G5, manufactured in 2025 by EMEC Prototyping GmbH, will be auctioned off in our online auction "Closure of a well-known German manufacturer of e-bike drives: warehouse, production, and office equipment, test stations, bicycles, tools, and accessories." Further details: Iiedpjz Nd N Dofx Afush E-bike motor test bench EMEC G5, manufactured in 2025 Test bench for e-bike drives with two test levels (Rack 1 and Rack 2) in an aluminum profile enclosure with safety doors, including an attached control cabinet. According to the nameplate: Manufacturer: EMEC Prototyping GmbH Type: Motor test bench G5 Year of manufacture: 2025 Electrical power: max. 16.6 kW Electrical connection: 3Ph~ 400 V / 32 A Dimensions (L x W x H): 2500 x 1070 x 2050 mm Weight: 1150 kg, permissible total weight: 1300 kg As far as can be seen, the following components are installed (information without guarantee): Both test levels appear to be equipped identically, per level: Beckhoff servo motor AM8064-0R1A-0000 (11.5 kW, 49.7 Nm, 3000 rpm) with gearbox and Beckhoff Air Cooling Kit AX2090 Beckhoff servo motor AM8053-0J1A-0000 (3.12 kW, 15.4 Nm, 2000 rpm) with gearbox and fan unit 2 torque measuring shafts Test specimen mount with protective bracket on a slide Linear guides with clamping levers for axial adjustment Fan for test specimen cooling Thermocouple connections (Type K) Connections for CAN, service, fan, and auxiliary voltage (AUX) Additionally: Laboratory power supply EA PS 10080-120 (0 to 80 V, 0 to 120 A) Control cabinet (as far as can be seen): Emergency stop, main switch, on/off button, CAN connection per rack, front connections 2x USB, DisplayPort, and RJ45 Forklift pockets, rollers, and adjustable feet All information without guarantee. The technical specifications were determined based on nameplates and visual inspection. The actual condition as inspected is the decisive factor. Functionality has not been tested. Software and operating computer are not part of the lot unless expressly stated.

Year of construction: 1990, condition: used, functionality: fully functional, For sale is a robust and fully operational roll forming machine for the production of corrugated and tile-profile sheets made of aluminum. The system is suitable for the continuous production of various profile geometries. The machine was commissioned in October 1990 at Leichtmetallwerk Nachterstedt GmbH and impresses with its solid industrial design. Thanks to the integrated profiling line, the cutting and embossing tool, and the automatic stacking device, an efficient production process is possible, from the coil to the finished profile. The system is particularly designed for the production of roofing profiles, tile profiles, and aluminum corrugated profiles, thus offering a versatile range of applications in the field of sheet metal processing and profile manufacturing. System components: - Coil - Profiling line - Cutting and embossing tool - Automatic stacking device Currently produced profiles: - Tile profile 33/175; material thickness: 0.6 mm - Asymmetrical corrugated profile 33/175; material thicknesses: 0.6 mm and 0.7 mm - Aluminum corrugated profile 28/125; material thicknesses: 0.7 mm, 0.8 mm and 1.0 mm Condition & Inspection: The system is ready for production, is in fully operational condition, and is currently still used for production. This allows the functionality to be verified on-site if desired. The roll forming machine can be inspected at any time by arrangement at our location in Krostitz, Hilchenbacher Straße 2A. Iiodpfjy Sxhwsx Afuoh The system is immediately available and ready for sale. We will gladly provide further technical information, images or details upon serious interest.

Year of construction: 2012, condition: excellent (used), Used STULZ ALD 1072 GE precision cooling / close control air conditioning units, suitable for data centre and technical room cooling applications. The units are manufactured by STULZ GmbH Hamburg and are CE marked. They use R410A refrigerant and operate on 400V / 50Hz power supply. Units are available with and without ECU, depending on requirement.Technical details: Manufacturer: STULZ GmbH Hamburg Type: ALD 1072 GE Years available: 2012 and 2014 Refrigerant: R410A Supply voltage: 400V ±10% Iijdpfx Aozklcisfujh Frequency: 50Hz Max. operating pressure: 40 bar Max. refrigerant filling charge: 11.20 kg Made in Germany Application: Data centre / server room / technical cooling Condition: Used Total available: 7 units

Year of construction: 1992, condition: used, Plate heat exchangers for milk processing. Iiedpfoh Eulgex Afueh