Used Gannomat Glue Spreader for sale (1,570)

Condition: used, functionality: fully functional, Equipment: double-sided, Amod CDL 1300, double-sided adhesive applicator Working width: 1300 mm Min./max. clearance: 0-90 mm Diameter of application rollers: 170 mm Two feed speeds Ndsdszrlykjpfx Abyjc Year of manufacture: 1994

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 300 kg Total power requirement 0,5 kw Nodpev A Hzhsfx Abyedc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Njdjvz E Taspfx Abyjdc Total power requirement 0,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x700x500 mm Weight 100 kg Njdpfx Absvz Hbxoyedc Total power requirement 0,25 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x600x500 mm Ndsdpfxsvz Hghe Abyjc Weight 60 kg Total power requirement 0,25 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x700x500 mm Weight 120 kg Total power requirement 0,25 kw Njdpfevz E H Hex Abyedc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x600x500 mm Ndjdpfx Aovz Hmnjbyjc Weight 60 kg Total power requirement 0,25 kw

Condition: excellent (used), Year of construction: 2014, Universally applicable frame and elongated hole drilling machine Specifically designed for window construction and universal use with pneumatic height adjustment. Double-hole drilling on two levels in a single clamping operation. Motor power: 1.5 kW Motor start with a practical handle switch. Equipped with a two-jaw chuck, 1–20 mm, by Röhm. Pneumatic adjustment of the machining height, allowing dowel holes to be drilled on two levels without re-positioning. The desired drilling heights can be set for each drilling level using a digital counter. Switching between levels is then performed pneumatically from the front. Cross adjustment: 430 mm, stepless or in a 12 mm grid. Maximum height adjustment: approximately 100 mm above table height. Drilling stroke: approximately 150 mm. 2 pneumatic workpiece clamps. Grid rail for quick lateral adjustment in a 12 mm grid. Stop for length adjustment when milling elongated holes. 2 swiveling workpiece supports. Special stop system, approximately 3.1 m long, with swiveling stops. Removable special stop with centering via a lever mechanism for different ladder rung widths, etc. Dust extraction funnel. Center stop. Side stop. Drill head mount. Laser. Operating manual. CE marking. Few small areas where paint has been touched up. Njdpfx Aj Aa A Eqjbyodc Almost new condition, see original photos. Dimensions: approximately 1500 x 900 x 1400 mm (L x W x H), weight: 300 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this seller."

Condition: new, Year of construction: 2026, GANNOMAT "PROTEC 571" (Drilling, Grooving, Milling) Base machine complete in standard configuration for drilling and grooving including: - Additional safety device via louver curtain - Requirement for horizontal Lamello P-system milling - Requirement for milling diameter > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software Ndodpfx Abozgfwleysc - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, right and left rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the back of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, from Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and milling cutter set 1 HSK mounting set 1 Mounting device HSK63F, simplest operation with the highest level of user comfort thanks to the roller clamping system, no clamping or tightening required, mounted on a stable base or on a workbench 1 Hook wrench for HSK63F collet 462E 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, grid 196 mm 1 Counterpressure device from above 1 LED lighting in the machine's working area 1 Tool for vertical Lamello P-system milling Machine with very good equipment including many drills and tools New machine with full warranty. The machine can be viewed and demonstrated in our showroom. A special price can be offered for our showroom machine!!!!!

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tools In top condition Base machine complete in standard configuration for drilling and grooving, including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-system milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Nodpezu A D Eofx Abyedc Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 dado saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, cutter length up to 130 mm including options 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the rear of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, by Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and cutter set 1 HSK mounting set 1 Mounting device HSK63F, easiest operation with maximum user comfort thanks to roller clamping system, no clamping or tightening required, mounted on a stable base or workbench, 1 Hook wrench for HSK63F collet 462E, 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, pitch 196 mm 1 Counterpressure device from above 1 Tool for vertical Lamello P-system milling Machine in very good condition with many drills and tools included. The machine can be viewed and demonstrated at our showroom. Location: available from stock in 54634 Bitburg - immediately available -

Condition: refurbished (used), Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Ndedpfx Abjzlbrveyec Location: DE-63934 Röllbach

Condition: used, Year of construction: 2019, Machine design: Throughfeed/Return feed Working area in X-direction: 1300 mm Working area in Y-direction: 5600 mm Working thickness (Z-dimension): 60 mm Number of main spindles: 1 Main spindle power: 5.5 kW Main spindle speed: 1000-20,000 rpm Clamping system: HSK-63 F Tool changer: Pick-up changer Tool change stations: 3 Back wall grooving units: fixed in Y-direction Vertical drilling spindles - in X-direction: 3 Vertical drilling spindles - in Y-direction: 10 Horizontal drilling spindle in X-direction: 2 Horizontal drilling spindle in Y-direction: 6 Control system: PC control Operating system: Windows Typewriter keyboard: Yes Mouse: Yes Programming system: Gannomat Editor DXF interface: Yes Online connection possible: Yes Table design: fixed, smooth table Ndsdsymp N Topfx Abyec Central lubrication: automatic Tools: various tools Operating hours: 920 hours Weight approx.: 1800 kg Extraction diameter: 3x80 mm Machine was modernized in the factory; pressure bar and control technology from model 0572! Storage location: Customer

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 390.829, functionality: fully functional, operating hours: 6,700 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 5,600 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 60 mm, workpiece weight (max.): 75 kg, number of axes: 1, number of slots in tool magazine: 1, actuation type: electric, total height: 1,409 mm, total length: 1,484 mm, total width: 2,325 mm, table width: 1,000 mm, Equipment: CE marking, For sale due to acquisition of a new machine: our Gannomat Protec 571 CNC machining center, purchased new in 2018. The Gannomat Protec CNC machining center is a high-precision woodworking machine designed for efficient drilling, milling, and grooving operations. Engineered for versatility and accuracy, it is ideal for producing furniture components and panels. Its advanced automation and robust construction ensure repeatable results and significant time savings in production. This machining center is especially suitable for workshops aiming to optimize productivity and achieve seamless machining processes. Technical specifications: - Workpiece width X: 60 - 1000 mm - Workpiece length Y: 250 - 5600 mm - Workpiece height Z: 6 - 60 mm - Workpiece weight: 75 kg - Rapid machining: 21 drilling spindles - Stable grooving unit: 8.3 mm saw blade width - Powerful milling unit: 5.5 kW (S1), with reversible rotation - Compact footprint: Less than 3.3 m² Including with the machine: - Drilling tools and 1 pc. HSK63 chuck and tool for modern joinery applications. Optional software: - Gannomat Editor office software: €1,000 (installation and activation by Gannomat for an additional fee) - DXF postprocessor for efficient operation: €1,000 (installation and activation by Gannomat for an additional fee) Nodpfx Abezhrdzoysdc ATTENTION: Low operating hours. The price of the machine does not include VAT.

Condition: excellent (used), Year of construction: 2020, MACHINING CENTER GANNOMAT "PROTEC 0571" working width 1300 mm Drilling, grooving, milling Base machine complete in standard version according to price list 01/19/D: For detailed technical data, please refer to the datasheet for PROTEC Type 0571 - Machining unit with: PowerBlock with 21 spindles and 1 slotting saw (BK 1341) - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y - Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm. - INCLUDES OPTION: Additional safety device with lamella curtain for processing Lamello P-System. Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm. - Nedpfsw Sguwex Abyedc Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1300 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. - Air connection: 7 bar Machine No. 435.046 Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A)) - Pressure device from above for working width 1300 mm - 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm - 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm - Documentation in German: Operating manual: GERMAN Programming manual: GERMAN Operator software: GERMAN Operating system: ENGLISH Keyboard: GERMAN Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2024, DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support designed for row drilling positions up to max. 300 mm. - Ideal three-stage tool system. - 1 set of drill bits for dowels: - 5 carbide dowel drill bits, Ø 8x77 mm, right-hand - 4 carbide dowel drill bits, Ø 8x77 mm, left-hand Basic machine DOWEL HOLE DRILLING MACHINE GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW, complete in standard design with: - Fully automatic electronic control with pulse operation via foot valve for clamping-drilling-releasing, electric intermittent operation. - Automatic retraction of the drilling unit after reaching the set drilling depth. - Automatic extension of the drilling hole depth when drilling on the end face. This eliminates the need to adjust the drilling hole depth from flat-face to end-face drilling (+10 mm, e.g. for a dowel length of 35 mm, drilling depth on the flat face 14 mm and drilling depth on the end face 24 mm). - 1 drilling bar with 21 spindles, pitch 32 mm, motor 1.5 kW (drilling feed 0-70 mm), incl. 21 quick-change chucks (Ganner system) for easy changing of the drill bits. - Easy pivoting of the drilling unit from 0° to 90°, supported by gas cylinders. - 1 clamping support movable in the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop rail 1800 mm for drilling shelves (aluminum profile 40x40 mm) with 3 stop blocks, with quick-change system, easily interchangeable from right to left stop side for drilling shelves in carcass structures in mirrored fashion, also suitable for row drilling in the 32 system. - Side stops and position settings, as well as the position of the drilling height above the support table, are adjusted by means of mechanical digital counters. - Side stops can be easily pivoted away, for the shortest possible conversion from carcass to frame and row drilling. - Clamping arms for the clamping support des Ndodoxnlflepfx Abyec

Condition: excellent (used), CN LINE of Cutting-Off and Tenoning-Mortising for 5-pieces front drawers or kitchen front doors 200037A) Optimizing Defecting Cut-off Saw "OMGA" Mod. Optima 120 SNC 4000 Workpieces Width x Thickness: mm 200 x 110 / mm 245 x 80 / mm 275 x 50 / mm 300 x 14 With: CNC, pusher feeding system, pneumatic tail clamp, outfeeding with motorized conveyoring carpet No. 1 Working unit (Circular Saw, max diameter mm 450/500) power Kw 4,6 (ca.) 200037B) CNC Double-end rouding Tenoning + mortising machine "BALESTRINI-CMS" Fox Lynk Workpieces Width x Thickness: MIN. mm 38 x 20 / MAX. mm 75 x 25 With: CN, hooper-feeder, out-feeding movable pusher No. 2 Working Units: 1st with shaping (tenons) + drilling (mortises) / 2nd with shaping (tenons) 200037C) Automatic Glue applicator "GANNOMAT" Mod. Injecta II Nedpszxn S Asfx Abyjdc No. 2 Glue injecting units: 1 at left-hand + 1 at right-hand 200037D) Rotary Cope and Stick Door Clamp "DOUCET" Mod. RDM-TM 5 30-72 Machine designed for quick and accurate assembly, clamping and squaring of cabinet doors With 5 stations, to assembly large pantry doors up to mm 750x1800 down to drawer fronts mm 137x312

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 1028 161, drilling depth: 75 mm, total width: 900 mm, total length: 1,200 mm, overall weight: 430 kg, spindle speed (max.): 2,800 rpm, drill spindle length: 800 mm, workpiece height (max.): 80 mm, number of spindles: 23, operating pressure: 6 bar, GANNOMAT COMBI 110 Ndedpfx Abjzvm Hajyoc Dowel and multi-hole drilling machine including stops READY FOR USE

Condition: good (used), Year of construction: 2014, ITW Dynatec Hot Melt Glue Pump Complete with two heated hoses, modules, guns and nozzles 240 Volts 7200 Watts Nedpfx Abourf T Deyodc 50 / 60 HZ In good working condition

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Dowel and long-hole drilling machine GANNER JUNIOR 320 LBM in very good condition, like new, the machine comes from a small carpentry shop and was used very little there it can be used to mill long holes and drill dowel holes in 2 levels without reclamping 380V, 1500W Speed: 2800 rpm Year of construction: 1990 with this machine, you can mill long holes for, for example, lock housings and similar items, or create all types of frame dowel joints at right angles, flush, and mitered ideal for the production of dowel joints in timber frame construction, furniture, door, window, and stair construction, and for similar applications drilling on 2 levels, the grid and stops, and the design of the machine allow dowel joints to be produced in a very short time, which makes the machine very economical the machine requires a compressed air connection of 6 bar (air consumption is very low) Right-hand rotation mills and drills very well and cleanly with 2 angle stops (one center stop and one side stop, which can be used on both sides) 2 stop rails can be attached on the left and right, the stop rails are 1000 mm long, each with 2 folding stops the workpiece is clamped using 2 pneumatic clamping cylinders the height adjustment from one drilling level to the other is also pneumatic; the pneumatic switch for this is located at the front of the machine, which ensures fast adjustment of grids and drilling levels with a precision 12mm grid rail, which has a center grid and 12 grids on the left and right can be quickly converted for long-hole milling; the machine can then be used without a grid with 2 adjustable stops on the left and right, and then has a working width of max. 420mm the max. borehole height is 100mm the max. borehole depth is 150mm with stop and scale the max. workpiece height is 160mm everything works perfectly we will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros, so you have no risk when purchasing; delivery to Austria and the EU is also possible on request the machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle professional equipment, not cheap hardware store junk Njdez I Eggopfx Abyjdc you can start working with the machine immediately with 2 chucks up to 20mm very stable and durable construction the precision guides with the backlash-free ball bearing bushings are in good condition and move smoothly

Condition: excellent (used), Year of construction: 1994, I sell the side glue spreader Fischer Ruckle FLA,  Ndedpfot N Hhkox Abyoc Year 1994. Suitable for solid wood glulam boards production. Throughfeed with feeding. Very good condition. Available immediately.

Condition: used, Year of construction: 2023, New demonstration machine! List price: €93,317 net. Basic machine complete in standard configuration for drilling and grooving: Detailed technical data can be found in the data sheet for ProTec Type 0571. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4-axis drilling axis in Y. Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg. Milling unit Profit HSK63F with 3-position magazine for automatic tool changing, motor 5.5 kW (S1), 1000-20000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm. Information: Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connection power 12 kVA, rated current 17.5 A, fuse 32 A, voltage 400 V, 50 Hz, 3 phases (without transformer). Power supply system TN or TT. Pneumatics connection 7 bar (102 psi). On the machine: coupling connector (quick coupling) ¼, DN7.2, brass, factory side. To the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, hose inner diameter 12 mm (min.). Compressed air requirement: continuous air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection: 3x extraction nozzle dia. 80 mm. Extraction speed 30 m/sec - measured at the extraction nozzle. Extraction requirement: min. approx. 2500 m3/h min. Machine weight approx. 1650 kg (with options!). Machine installation location: In principle, a ProTec can be fixed to the floor with screws. A concrete floor (or foundation) is assumed (at least at the 4 machine edges/machine feet). Equipment: ProTec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for the front of the machine, width 500 mm. Roller table 765 mm (Y-axis), foldable, for the back of the machine, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device via slat curtain. Requirement for horizontal milling for Lamello P-system (without tools for Lamello P-system). Drill set for ProTec shaft ø 10 mm with clamping surface (JSO): 1 HW roofing drill 5x70mm (cutting depth 35mm), LH # 30566-5-05035-L3. 1 HW dowel drill 5x70mm (cutting depth 35mm), RH #30540-5-05035-R4. 1 HW dowel drill 5x70mm (cutting depth 35mm), LH #30540-5-05035-L3. 1 HW dowel drill 8x70mm (cutting depth 35mm), RH #30540-5-08035-R. 1 HW dowel drill 8x70mm (cutting depth 35mm), LH #30540-5-08035-L2. 1 HW dowel drill 10x70mm (cutting depth 35mm), LH #30540-5-10035-L1. 1 HW countersink drill 15x70mm (cutting depth 35mm), LH #30300-5-15070-L1. 1 HW countersink drill 20x70mm (cutting depth 35mm), RH #30300-5-20070-R1. 1 HW countersink drill 35x70mm (cutting depth 35mm), RH #30300-5-35070-R. 1 HW grooving cutter ø 125/30 mm, grooving cutter width (SB) 4.0 mm, Z=12, LH, Leitz. Only for chipboard and MDF, solid wood on request and by agreement. Tool holder HSK63 F, 3.0 pcs. For collet 462E/OZ25. Collet 462E/OZ25 for shank 25 mm, 3.0 pcs. Carbide shaft cutter Z1+1, 1.0 pcs. with WP drill cutter ø20, S25, LH 120, L2/L3 58 mm. Grooving cutter HW indexable insert Njdsw Tfzfepfx Abyodc

Condition: ready for operation (used), Year of construction: 2021, Nordson Hot Melt Glue Pump Type: MESA 6 Nsdpfx Abey R Ecreyjdc Year 2021 Power 200/240 V 50/60 Hz, 15/18 A Dimensions: 750 mm x 350 mm x 570 mm.

Condition: good (used), Year of construction: 2005, Length: 2300 mm, unlimited as it is open on the sides. Ndodpfxszzrdzo Abyec 4 stations for drilling, inserting dowels, and applying adhesive. Equipped with a new adhesive nozzle.

Condition: used, Year of construction: 1999, Drilling head with 21 spindles, pitch 32 mm, working width: 640 mm, portal passage: approx. 750 mm, drilling stroke: 100 mm, positional adjustment of the drilling unit: 0 - 45 mm, positional adjustment of the hole pattern: 0 - 300 mm, spindle speed: 2800 rpm, shank diameter of the drill: 10 mm, clamping height of the workpieces: max. 100 mm, motor: 1.5 kW, working height: 850 mm, compressed air connection: 6 bar, weight: approx. 400 kg. Storage location: Garbsen. Njdpfx Abs Aay Icsyjdc

Condition: used, Year of construction: 1993, Used Machine Year of Manufacture: 1993 Features and Technical Specifications: - 2-jaw drill chuck for shanks up to 20 mm in diameter - Pneumatic position adjustment - On 2 levels: 0–100 mm - Max. drilling depth: 150 mm - Precision indexing rail, 12 mm Ndsdpfxoz I Uffs Abyoc - Center locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor: 1.5 kW - Speed: 2,800 rpm - Lowerable slotted hole drilling unit with 2 program cams - Machine weight: approx. 310 kg - Machine dimensions (W x D x H): 1100 x 1100 x 1500 mm (without stop)