Used Fasti 417-125-3 for sale (65,724)

Condition: excellent (used), For sale: an industrial KSB ETABLOC-G 32-125/222 centrifugal pump with a 2.2 kW electric motor. The pump has been inspected and is in good working order. Pump technical specifications: Manufacturer: KSB Model: ETABLOC-G 32-125/222 Identification number: 48862622 Flow rate: 4–30 m³/h Head: 25–18 m Pump speed: 2900 rpm Additional type: G32-125/22 2 Number: 198057/6 Motor specifications: Power: 2.2 kW Power supply: three-phase Voltage at 50 Hz: 220–240 / 380–420 V Kedpfjzvhn Ejx Adqsdr Speed: 2850 rpm Frequency: 50 Hz Power factor: cos φ 0.89 Protection class: IP55 Insulation class: F

Condition: good (used), Year of construction: 2004, functionality: fully functional, Clamping force: 1250 kN Screw diameter: 35 mm Tie bar spacing: 470 mm Shot weight: 142 g Minimum mould height: 300 mm Kdedpfxjwthfuo Adqer Total weight: approx. 6,000 kg

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Kjdpfx Aoxz Emvsdqodr Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Weight: approx. 2300 kg

Year of construction: 2010, condition: excellent (used), Here, we offer a Heraeus Vötsch temperature testing chamber. Vötsch temperature testing chamber, test cabinet VLM 3068/S, air-cooled (top-loading test chambers for construction materials) Control panel The control panel is mounted on a console on the temperature testing chamber. All control and operating commands can be initiated by simply touching the function symbols. The operating manual for the control panel is included. Main switch The main switch is located at the front of the temperature testing chamber. Air handling unit The air handling unit is located in the test chamber and contains the components necessary for temperature control. In the air handling unit, the air is conditioned (cooled/heated) and circulated through the test chamber by the test chamber fan. The air is drawn in at the center of the side wall and re-enters the test chamber via the air guide plates on the long sides. Feedthroughs The temperature testing chamber can optionally be equipped with feedthroughs. These allow cables and testing equipment to be placed in the test chamber. Feedthrough at the front: 2 x 82 mm diameter, at the rear: 1 x 85 mm diameter Internal dimensions: width 2000 mm, depth 570 mm, height 600 mm External dimensions: width 3000 mm, depth 870 mm, height 1060 mm Technical data: Data for mechanical load: max. load with test specimen Kdodpfxozgbmis Adqor Test chamber floor (evenly distributed over the area) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Rated voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW, rated current 9 A Fuse on customer side: 16A, slow-blow Temperature testing chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement: sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, punching force: 30 t, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,250 mm, overall weight: 6,950 kg, EUROMAC PUNCHING MACHINE MOD. 1250/30 – 2000 AUTOINDEX YEAR 2009 – CE – FULLY REFURBISHED, AS NEW. Maximum punching force: 300 kN Y-axis travel with multitool: 1300 mm Y-axis travel with single punch: 1250 mm X-axis travel: 1250 x 2000 mm Automatic repositioning: Up to 10,000 mm Punch stroke adjustment: from 0.1 to 31 mm Autoindex multitool stations: 5 Rotational speed: Programmable Y + X 1250 speed: 50 m/min Y + X 2000 speed: 60 m/min Positioning accuracy: +/- 0.1 mm Kdjdpjy Dgrnjfx Adqer Clamp opening: 11 mm Maximum strokes: 300 (1/min) Maximum sheet thickness: 10 mm Maximum punching diameter: 81 mm Installed power during operation: 7.5 kW Year: 2009 CE marked machine Overall dimensions: 2000 x 4000 x h 3350 mm Weight: 6950 kg

Condition: used, Year of construction: 2011, functionality: unexamined, Equipment: documentation/manual, IRS Robotics® – Reliability as Standard Established 2002 KUKA KL 1500-2 and KL 1500-3 7th Axis Robot Linear Rail – available in various lengths Includes our warranty. Inspected by our in-house robotics engineers. Brand: KUKA Type: KL 1500-2 and KL 1500-3 Currently available lengths and types (while stocks last): Overall length KL 1500-2 (older generation) = 4400 mm Overall length KL 1500-3 (newer generation) = 15909 mm Optional: We can supply the robot with a KUKA robot. Complete with 7th axis drive unit, including integration into the robot controller, motor, cable chain, grease pump, fully functional and operational. Applicable to the following KUKA robot types (availability upon request): KR 30 to KR 125 KR 150 KR 200 KR 360 KR 500 About: Our daily business revolves around the reliable supply of refurbished A-brand robots: ABB – KUKA – ABB – YASKAWA. Ksdpfx Aszh Hfysdqjdr Established 2002. We ship worldwide.

Condition: excellent (used), For sale: a used KSB ETABLOC-GN 32-125/222 industrial centrifugal pump with a 2.2 kW electric motor. The pump has been inspected and is in full working order. It is in used condition, with normal signs of wear and tear, as well as some localized surface corrosion on the flanges and housing. The photos provide a detailed view of its condition. Pump technical data: Manufacturer: KSB Model: ETABLOC-GN 32-125/222 Design: GN11 Identification number: 48861776 Kedpfxozvhq Ho Adqjdr Number: 5-925-204037/1 Capacity: 4–30 m³/h Head: 25–18 m Rotational speed: 2900 rpm Approximate weight of the complete unit: 39.5 kg Motor data: Manufacturer: KSB Type: OU FA 90L2A-60 Power: 2.2 kW Power supply: three-phase Voltage: 220–240 / 380–420 V Frequency: 50 Hz Rotational speed: 2850 rpm Protection class: IP55 Insulation class: F cos φ: 0.89

Condition: used, Year of construction: 2014, functionality: unexamined, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 125 °C, number of chambers: 1, We offer two used CATALYTIC DEBURRING OVENS, 125°C, Zahner Electronic, manufactured in 2014. The ovens were purchased with the intention of using their components as spare parts. They have never been put into operation. Nothing has been disassembled. Year of manufacture: 2014 Rated frequency: 50 Hz Rated voltage: 3L, N, PE 3×400 V AC Degree of protection: IP40 Kedozq Ax Ujpfx Adqsdr Control voltage: 24 V DC Rated current: 32 A Short-circuit current Icp: 10 kA Peak short-circuit current Ipk: 17 kA Type testing: not type tested Touch protection: for trained personnel. The stated price is for two units. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: good (used), Year of construction: 2018, Recycling technology, agglomerator, high-performance mechanical dryer, dry cleaner, plastic recycling machine, drying system -Handover: in its current condition as inspected -Condition/Scope of delivery: untested, as shown in the pictures -Manufacturer: WIPA, Dry Cleaner Mechanical High-Performance Dryer -Type: MD 1250-3000/90/0.75/3R -Drive motor: 90 kW Kjdpfx Ajztnduodqsdr -Drum length: 1800 mm -Sieve: Perforation Ø 5 mm -Dimensions: Dryer 4475/2140/H2630 mm / Control cabinet 1200/660/H2195 mm -Weight: 8400 kg / 340 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2023, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, sheet thickness (max.): 6 mm, working length: 3,200 mm, Equipment: CE marking, documentation/manual, Discover Our Range of Pallet Racking Systems – The Ideal Solution for Efficient Storage of Palletized Goods. Robust, Modular, and Easily Adaptable to Your Logistics Needs! Benefits: Kdedpfeh Apkajx Adqsr • High load capacity • Quick and secure assembly • Customizable to your specific dimensions. Price varies depending on model and size!

Year of construction: 1976, condition: ready for operation (used), functionality: fully functional, center height: 125 mm, center width: 600 mm, year of last overhaul: 2026, The machine underwent a comprehensive retrofit in 2026! Kdodpszr Ep Esfx Adqjr New centering point with carbide insert on the workpiece spindle stock Tailstock with MK-3 mount and air lift Adjuster on the tailstock New centering point with carbide insert on the tailstock 2 grinding wheel flanges 1 new grinding wheel 1 internal grinding spindle Completely renewed paper band filter with new filter fleece and circuit Completely overhauled, steplessly adjustable grinding spindle motor Automatic grinding cycle with dwell time and shut-off Machine geometrically completely overhauled Guides ground and scraped Hydraulic cylinder overhauled New piston rod and seals Machine body and assemblies blasted, primed and completely painted TECHNICAL DETAILS Center height: 125 mm Center distance: 600 mm Grinding wheel flange dimensions: 400 × 50 × 127 mm Speed of internal grinding spindle: 14,000 rpm EQUIPMENT Workpiece spindle stock standard with MK-5 mount, swiveling Stepless speed control via potentiometer

Condition: ready for operation (used), Year of construction: 2019, operating hours: 9,356 h, punching force: 31 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,254 mm, travel distance Y-axis: 1,263 mm, CNC punching machine manufactured in 2019. This Euromac MBX 6 Plus 1250/30-2250 features a total of 24,439,006 hits and a total working time of 11,309 hours. It includes a CNC control system with a dedicated console and a brush table to prevent sheet scratching. If you are looking to get high-quality punching capabilities, consider the Euromac MBX 6 Plus 1250/30-2250 machine we have for sale. Contact us for further details. Kodpoy Sar Dsfx Adqodr - Total Hits: 24,439,006- Total Working Time: 11,309 hours- Actual Punching Time: 4,708 hours- Control System: CNC with dedicated console and Logitech keyboard interface- Multitool Setup: Station 2, Code 1 (6MT01)- Oil Temperature: 22 °C- Power Supply: 50 Hz- Bed Type: Brush table to prevent sheet scratching

Year of construction: 2022, condition: ready for operation (used), A GSW decoiler is available. Load capacity: 3000kg, strip width: 650mm, max. strip cross-section: 107.5mm/0.35mm, machine dimensions Y/Z: approx. 1150mm/2000mm. An on-site inspection is possible. Kedpfsyz Apwjx Adqodr

Condition: like new (used), functionality: fully functional, Exhibition machine For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air flow rate of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and refurbished by our qualified personnel. Technical data: - Clean air extraction unit RL-125 - Extraction connection 125 mm - Manual filter cleaning Ksdpfx Aszrnqljdqedr - Max. air flow rate 1,900 m³/h - Chip container with a capacity of 200 liters - 3 kW (4 hp) motor / 400 volts - H3 certified! The clean air unit is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-D1618

Condition: used, Mechanical high-pressure machine vice GRESSEL Type MHS 125-3b High-pressure vise Jaw width: 125 mm Jaw height: 40 mm Jaw opening: 203 mm Clamping force: 2 / 3 / 4 t Guideway height: 62 mm - Clamping force adjustable in 3 stages - High-pressure vise with mechanical force amplifier - Clamping range adjustable in 4 stages - 1 compensating jaw, type 180, jaw width 125 mm - Lateral thread for workpiece stop Dimensions: 440 x 140 x 102 mm Weight: 28 kg Kdjdpfxey Ra Dds Adqor

Condition: used, lifting height: 12,000 mm, Year of construction: 2019, operating hours: 2,107 h, load capacity: 3,499 kg, Equipment: air conditioning, cabin, JCB 535-125 Year of manufacture: 2019 Approx. 2,108 operating hours Air conditioning Kdsdey Tz Dwjpfx Adqor JCB Eco Max 4.4-liter engine Without DPF or exhaust aftertreatment 3 control circuits 3 steering modes – front-wheel steering, crab steering, all-wheel drive Lifting height: 12 m Load capacity: 3.5 tons Michelin tires, approx. 70% remaining Price: €39,900.00 net Available at an extra cost: Earth bucket: €1,490.00 net Light materials bucket, 2 m³: €2,100.00 net Light materials bucket, 2.7 m³: €2,150.00 net Light materials bucket with double cutting edge (reversible blade), 2 m³: €2,250.00 net Light materials bucket with double cutting edge (reversible blade), 2.7 m³: €2,450.00 net Small work platform for JCB or Manitou, Claas, Merlo, 1.2 m wide: €990.00 net Large work platform, 2 m wide: €1,550.00 net Inspection possible at any time, by prior telephone appointment. All information is subject to change without notice.

Condition: refurbished (used), Year of construction: 1994, machine/vehicle number: HFBO 125 30 H40402, stroke length: 3,000 mm, Fully refurbished in 2019, AMADA PROMECAM 125.3 press brake, year of construction 1994. Excellent Condition. Kodjy Nibcspfx Adqodr If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Max. cutting length: 3,000 mm Max. sheet thickness: 6 mm steel Ksdevmz Nbepfx Adqodr Motorized backgauge with digital display up to 1000 mm Side stops and table extensions cutting length limitation Cutting edge lighting Hydraulic shear angle adjustment knife sharpened Weight: approx. 6500 kg

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms Kjdpsy E T Dgjfx Adqsdr - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition

Condition: good (used), functionality: fully functional, power: 100 kW (135.96 HP), gearing type: automatic, fuel type: diesel, lifting power: 3,500 kg/m, lifting height: 12,000 mm, Year of construction: 2015, operating hours: 5,300 h, Equipment: air conditioning, JCB 535-125 Year: 2015 Ksdpjx N Nw Refx Adqedr Approx. 5300 operating hours 3.5-ton lifting capacity Approx. 12-meter lifting height Auxiliary hydraulics Automatic leveling Very good condition Ready for immediate use Bucket available at an extra charge Delivery possible

Condition: good (used), Year of construction: 2004, Working hours : 21.447 h Clamping force: 125 tons Tie-bar spacing (horizontal × vertical): 470 mm × 470 mm Platen size (mould plate) approx: 745 mm × 770 mm Kdedpjxqx Avofx Adqjr Minimum mould height (installation height): approx 300 mm Mould opening (stroke): 600 mm Maximum daylight between plates: approx 900 mm Screw diameter: 40 mm Injection volume: ~ 204 cm³ (≈185 g PS) in one similar spec sheet Motor power / drive: 18.5 kW drive power (pump drive) Heating power: around 11 kW

Condition: good (used), functionality: fully functional, total length: 4,000 mm, total width: 2,000 mm, total height: 2,800 mm, overall weight: 7,500 kg, FOR SALE: Amada HFB 125/30 Press Brake Available for purchase: a true industry workhorse, the Amada HFB 125/30. Known for its exceptional precision and reliability, this machine has been well-maintained and is ready for demanding production environments. Technical Specifications: Press Capacity: 125 tons Bending Length: 3000 mm Year of Manufacture: approx. 2001 Controller: Operateur CNC (multi-axis control) Stroke Length: 200 mm Open Height: 450 mm Key Features: Kedpfx Adey Athyjqsdr Precise and efficient down-stroking operation. Versatile multi-axis backgauge for complex setups. Rigid frame design ensuring consistent angles across the full length. Well-maintained and in full working order.

Condition: excellent (used), Year of construction: 2013, operating hours: 55,200 h, functionality: fully functional, machine/vehicle number: A0035A0294, Machine type: TruPunch 3000-1300 (S11) TruPunch 3000-1300 (S11), medium format 1250/2500 We are the first and only owner of the machine. Machine with complete history and service documentation. Machine is in fully working order and in continuous operation. Technical data: Width 6500 mm Depth 6203 mm Height 2252 mm Max. punching sequence (E = 1 mm) 1000 1/min Max. punching sequence – marking 2500 1/min Punching mode, X-axis 2500 mm Punching mode, Y-axis 1250 mm Max. sheet thickness 6.4 mm Max. workpiece weight 160 kg Max. punching force 180 kN Multitool tool change time 0.3 sec Number of tools/sheet clamps | 18 pcs / 2 pcs Max. part size, part flap when punching 500 mm x 500 mm Max. part size, rigid slide for punching (with sliding table) 80 mm x 50 mm Average power consumption with active automatic shutdown 0.3 kW Average power consumption during production 5.6 kW Additional, non-standard machine equipment: 1) Thread forming function with thread counter and thread forming tool damage control: chip-free thread forming is possible in both structural steel and stainless steel and aluminum. The threading tool is mounted like all other tools in the head. Thread size to be machined ranges from M 2.5 to M10. A thread sensor enables control of the threading tool damage. User-friendly operation, including lubricant level control. 2) Marking/surface embossing function: fast marking using appropriate tools. High-quality knurling can be performed at high speed. 3) Lowerable die: the lowerable die enables scratch-free processing because it moves downward when positioning the sheet metal. 4) Additional clamping device: recommended for processing very thin sheets and when using roller tool machining technology. An additional 2 clamping devices can be installed. In combination with the SheetMaster Compact, a third clamping device is recommended. 5) 3 x Option - vertically movable clamping device: the clamping devices move vertically (maximum stroke 12 mm); enables direct processing of the sheet metal at the clamping devices. This option reduces scratches from high forming dies. 6) Sensor in the slide for small parts: control of the slide for small parts (included in the "Nibbling-free machining" option). 7) Second locating pin: the pin is located on the outside on the right side. 8) RTC tool cassettes: 17 tool cassettes with die plates, enabling quick machine retooling. 9) Brush table with unloading and loading assistance: a brush table is recommended for processing particularly delicate materials. Vertically moving balls embedded in the table facilitate the loading and unloading process. Kjdjzd U D Njpfx Adqedr We invite you to contact us.

Condition: good (used), functionality: fully functional, RAS: Cutting length 1040 mm Sheet metal thickness in steel: 2.5 mm Sheet metal thickness in stainless steel (700 N): 1.5 mm Back gauge distance: up to 550 mm .....FASTI: Capacity 1020 x 2 mm with pneumatic weight compensation for the bending arms and with finger stop Kdsdpfxozvcbao Adqer Package price: EUR 4,900.00 net

Year of construction: 2010, condition: ready for operation (used), A complete turning line for the production of drive shafts, consisting of a Lang-Laru cut-off and centering machine, three EMAG lathes with robot automation, conveyor peripheral equipment and measuring station, is available. 1) End machining machine Lang-Laru DHZ 03/1250-RR-S, year of manufacture: 2010, tool stations: 2x12, loading: Kuka robot/EWAB conveyor, machine dimensions X/Y/Z: approx. 8600mm/3000mm/4100mm, weight: approx. 15000kg, control: Siemens Sinumerik 840D. 2) 3x vertical shaft turning centers EMAG VTC 250, year of manufacture: 2010, loading: Kuka robot/EWAB conveyor, max. turning length: 630mm, max. swing diameter over bed: 140mm, max. workpiece weight: 20kg, spindle bore: 52mm, speed: 5000rpm, tool stations: 2, tool holder: VDI40, machine dimensions X/Y/Z: approx. 8100mm/3300mm/4300mm, weight: approx. 14000kg, control: Siemens. This is a complete turning line with peripheral equipment and automation. Documentation available. An on-site inspection is possible. Kedpfx Aozfp Hhjdqedr