Used Domino Domino Dpx 1000 Laser Extraction Unit, Laser Fume Extractor, Extraction System for sale (66,662)

Condition: used, Filter housing, dust extractor, extraction installation, filter unit, dust filter Hodpowyf T Asfx Aaxofn Dimensions: 680mm x 680mm x 2800mm Outlet diameter: 200mm Capacity: 1500 m3/h New top filter 3 round filter cartridges need replacement Complete with control cabinet and pneumatically cleaned filter cartridges

Year of construction: 2001, condition: used, functionality: fully functional, Used wet and dry vacuum cleaner (dust extraction system) in good condition. Hodszb Ipuepfx Aaxsfn Extraction capacity: 1,800 m³/h.

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Hedpfxozgci Ee Aaxjfn Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 135 kg, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 2,900 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter KEMPER. For welding, grinding, and all types of dry dust. Hfsdpfeyz Rt Djx Aaxjn The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency of the unit. Model: Filter-Cell XL Year of manufacture - 7/2015 Fan power 1.5 kW. Airflow 1000 m3/h Vacuum 2900 Pa Cartridge filter element. Stock no. - 1128 1/2

Condition: used, Year of construction: 2011, filter area: 418 m², suction capacity: 14,000 m³/h, negative pressure: 3,600 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: VALCO Hodpjwiuaqofx Aaxefn Model: PPX-18-W3 Thanks to the W3 approval, the filter in this version can be used when welding high-alloy steels. The filter is cleaned with compressed air pulses during operation, which ensures high efficiency of the device. The fan is on the clean side, which reduces the risk of explosion to a minimum. Parameters : Efficiency - 14000 m3/h Negative pressure - 3600 Pa Filtration area - 418 m2 Cartridge filter inserts - 18 pieces Fan - 15 Kw Inlet diameter - 450 mm total length - 2.80 m total width - 1.35 m height - 4.00 m Device from 2011 Full technical documentation available. There are 2 pieces of this device available. Stock no.: 0986 1/2

Condition: used, Extraction system, central extraction, room air filter system, ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of manufacture approx. 2005 Volume flow rate approx. 5000 m³/h Hfsdpfxoicic Ho Aaxjn Extraction connection at the filter inlet 1200 x 150 mm Exhaust connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 volts, 50 Hz - Control cabinet for wall mounting - Bag filter - Maintenance flap for filter replacement - Radial fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: good (used), LINCOLN high-pressure, self-cleaning extraction unit for laser cutting, welding, dust, and particulate matter removal. Cartridge-type filter element cleaned during operation by pulses of compressed air, ensuring high device efficiency. High-pressure turbine motor with a power of 5.5 kW and a vacuum of up to 17,650 PA!! Flow rate: 500 m³/h. Hsdsg Th S Aopfx Aaxefn

Condition: excellent (used), ALKO Power Unit 250 P – used – clean air extraction unit Air filtration using filter hoses, pneumatic cleaning, movable collection container, automatic fire extinguishing system ----- Technical data ----- Extraction nozzle diameter: 250 mm, Nominal volume flow: 3,534 m³/h, Hedpfezzn Iiox Aaxjfn Number of bags: 2, Motor: 7.5 kW, Compressed air connection: 6 bar, Dimensions (L x W x H): 2,420 x 1,000 x 2,360 mm, Weight: 758 kg Quality information: - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatic system checked - Ready for immediate use

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 20 m², suction capacity: 3,500 m³/h, negative pressure: 3,000 Pa, Mobile welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter TEKA. Model: TK-PF Mobile filtration and ventilation unit. Suitable for welding, grinding, and all types of dry dust. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high efficiency. Fan power: 1.1 kW – three-phase Max. capacity – 3500 m3/h Max. negative pressure – 3000 Pa 2 extraction arms, each 4.00 m long. Stock no. – 1106 Hfjdpfx Aasy Hq Rtexjn

Condition: used, Wente CamSorik GmbH Laser measuring system / 3D laser measuring camera Wente CamSorik LaserCam_hs LC691103 Complete laser measuring system with tripod system, laptop, LaserCam_hs software, and documentation For sale is a used laser measuring system from the manufacturer Wente CamSorik GmbH. The system is suitable for non-contact measurements, 3D measurement technology, quality control, position detection, as well as industrial measuring and automation tasks. Technical data: Manufacturer: Wente CamSorik GmbH Model: LaserCam Type: LaserCam_hs Serial number: LC691103 Year of manufacture: 2018 Made in Germany Laser class: 2 Wavelength: 630–690 nm Laser power: < 1 mW Standard: EN 60825-1:2007 Network interface: Ethernet (RJ45) IP address: 192.168.1.121 Dimensions of sensor unit (approx.): 620 × 240 × 240 mm (L × W × H) Total weight including accessories and tripods: approx. 28 kg Software / Laptop: Acer TravelMate laptop LaserCam_hs Version 7.2.10.555 Wente CamSorik GmbH LaserCam_high speed documentation available Equipment: LaserCam_hs sensor unit COLA receiver / transmitter LED ring light Ethernet interface Industrial connector 2 × Manfrotto professional tripods Acer laptop including power supply LaserCam_hs software Documentation Connection cables and accessories as shown in the pictures Application areas: Industrial measurement technology 3D measurement technology Quality control Robotics and automation Research and development Production monitoring Scope of supply: Wente CamSorik LaserCam_hs LC691103 2 × Manfrotto professional tripods COLA receiver / transmitter Acer TravelMate laptop including power supply LaserCam_hs software version 7.2.10.555 LaserCam documentation Connection cables and accessories as shown in the pictures Condition: Hfsdpfx Aoz Ndq Hsaxsn Used Laptop and LaserCam_hs software have been started. Optical condition as shown in the pictures. Normal signs of wear and tear. The table shown in the photos and other items not explicitly mentioned are not included in the sale. Shipping by freight forwarder is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, total height: 2,000 mm, total width: 990 mm, total length: 1,800 mm, input voltage: 400 V, overall weight: 450 kg, warranty duration: 12 months, space requirement height: 2,000 mm, space requirement width: 1,000 mm, space requirement length: 2,000 mm, power: 5.5 kW (7.48 HP), filter area: 120 m², intake manifold diameter: 300 mm, noise level: 70 dB, suction capacity: 6,000 m³/h, volume flow: 6,500 m³/h, Equipment: documentation/manual, 1. Product Description The Airtech extraction unit is a horizontally installable, integrated dust separation system (cartridge filter unit) equipped with multiple filter cartridges. It is designed for applications with small to medium airflow volumes and offers high efficiency in particle separation. Key Features: - Multiple filter cartridges in a horizontal configuration for a compact and maintenance-friendly design. - Particularly suitable for industrial applications that require constant and reliable dust extraction. Your Benefits: - High Filtration Efficiency & Air Quality: Thanks to multi-stage filtration, fine dust particles are effectively retained, contributing to clean air and extending the service life of your production equipment. - Compact Design: The horizontal layout saves space and facilitates integration into existing systems. Hfodpoxxvpiofx Aaxon - Low Maintenance: Easy access to the filter cartridges allows for efficient inspection, cleaning, or replacement. Powerful: The 5.5 kW blower ensures strong suction power and stable extraction performance even in challenging applications. Delivery ex works / from stock Installation and Commissioning (optional): Available upon request by our trained technical team. Spare parts (filter cartridges) as well as maintenance contracts can be offered separately to maximize your system’s uptime.

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, total width: 1,900 mm, total length: 3,100 mm, total height: 4,350 mm, filter area: 288 m², suction capacity: 20,000 m³/h, Dust extraction unit, fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned by pulses of compressed air during operation, resulting in high device efficiency. The fan (built-in) is located on the clean air side, which minimizes the risk of explosion. Parameters: Capacity up to 20,000 m3/h Hfodszd Twbepfx Aaxjn Filtration area 288 m2 Cartridge filter elements - 16 pcs. Motor power 15 kW Inlet diameter - 500 mm Dimensions: Height - 4.35 m Width - 3.10 m Depth - 1.90 m Weight approximately 1600 kg Stock number: 1146

Condition: new, Year of construction: 2025, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, type of input current: three-phase, volume flow: 6,500 m³/h, intake manifold diameter: 300 mm, filter area: 120 m², noise level: 70 dB, total height: 2,400 mm, total length: 1,900 mm, total width: 990 mm, overall weight: 580 kg, space requirement height: 2,500 mm, space requirement length: 2,000 mm, space requirement width: 1,000 mm, warranty duration: 12 months, Equipment: documentation/manual, 1. Product Description The Airtech extraction unit is a horizontally mountable, integrated dust separation system (cartridge filter unit) equipped with multiple filter cartridges. It is designed for applications with small to medium airflow volumes and delivers high efficiency in particle separation. Main features: - Multiple filter cartridges in a horizontal design for a compact, maintenance-friendly construction. - Particularly suitable for industrial applications where consistent and reliable dust extraction is required. Your Benefits - High filtration efficiency & air quality: Thanks to multi-stage filtration, fine dust particles are effectively captured, contributing to clean air and prolonging the lifespan of your production equipment. - Compact design: The horizontal configuration saves space and facilitates integration into existing systems. - Low maintenance: Easy access to the filter cartridges allows for efficient inspection, cleaning, or replacement. Powerful: The 7.5 kW blower ensures strong suction and stable extraction performance, even for demanding applications. Delivery ex works / from stock Hedpoxxvkmjfx Aaxefn Installation and commissioning (optional): Available on request, performed by our trained technical team. Spare parts (filter cartridges) and maintenance contracts are available separately to maximize your system’s uptime.

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Hedjyk Ip Tspfx Aaxefn Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: used, Bielomatik Type: K3633/023 Bielomatik Laser Welding System Machine Description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle. In the middle part of the machine frame is the working area with the welding station, the tool (on the rotary table), and the clamping system for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area by a laser-proof enclosure. The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser Type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic Data Machine Equipment: 1 complete machine frame with enclosure, substructure, and safety devices, painted. Adjustable machine feet, designed for transport with a forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is firmly mounted on the back of the machine. Laser system from IPG. 1 fiber laser 300W cw, at the fiber optic end, 1070nm - completely air-cooled. 1 power supply for laser unit, pilot beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour 1 Scanner - 20 aperture Optics, F-Theta lens, focal length determines the processing field and processing distance 2x base tool, tool coding with transponder Clamping system for holding a mask with absolute encoder with pneumatic clamping system for controlled pressing of each welding part Pneumatic air shower for protection of the lens housing Microbox PC427B incl. RTX (Siemens) Pre-installed software - Siemens S7 PLC Profibus, Profinet, Ethernet, RS232 interface Touch panel 15” for operation and data/parameter input, machine lighting Connection flange for on-site extraction Machine Data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Firmly screwed onto the machine frame. Area requirement: 5400 x 5400mm Technical Data: Power supply: Hfjdezgaazepfx Aaxjn Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse: 16A Exhaust: Nominal diameter ∅160 Air volume 500-1000 m³/h Weight approx. 2000 kg Condition: used (Changes and errors in technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2011, operating hours: 2,591 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,400 mm, total length: 1,250 mm, total height: 4,000 mm, volume flow: 10,000 m³/h, filter area: 100 m², suction capacity: 10,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P10. The main areas of application for these systems are industrial plants/welding shops where point extraction is not feasible or where point extraction is insufficient to maintain air quality in the hall. Laterally mounted ducts with a pollutant collection point at a height of 3 m draw in contaminated air and direct it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses are supplied to clean the cartridge filters automatically at the required intervals. Upon impact, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the hall towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Hedez N Am Uepfx Aaxsfn Low compressed air consumption thanks to the "Power-Spray" system. Parameters: Capacity - 10,000 m3/h Motor power - 11 kW Filtration area - 100 m2 Fan in a sound-absorbing housing Year of manufacture - 2011 Number of operating hours - 2591 h Dimensions: Height - 4.00 m Base width - 1.20 m x 0.80 m Stock number: 1173

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 200 kg, input voltage: 400 V, filter area: 15 m², suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, input frequency: 50 Hz, hose length: 3,000 mm, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with non-polluting dust collection. The mobile cartridge filter KEMPER MaxiFil Clean is designed for continuous operation to filter welding fumes and dust with high concentrations. Suitable for use in welding carbon steels, low-alloy steels, high-alloy steels, and aluminum using any welding method. Economical in operation due to the long service life of the filter cartridge. Parameters: Capacity - 1100 m3/h Hodezdqv Uepfx Aaxefn Maximum vacuum - 3200 Pa Three-phase fan with a power of 1.5 kW Filtration area - 15 m2 Year of manufacture - 2015 Patron filter cartridge with PTFE membrane Filtration efficiency - > 99.97% Built-in delay timer in start-stop mode. When connected to a start-stop sensor (optional), the delay time for fume extraction after the welding process is completed can be set to a value of 5-60 seconds. Stock number - 1145

Condition: excellent (used), Year of construction: 2021, Extraction connection, D 140mm Chip collector capacity 200L Airflow rate [m³/h] 2500 Hfsdpfx Aaszxql Ejxen 3 kW, 400V

Condition: used, power: 2.2 kW (2.99 HP), input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 1,850 m³/h, intake manifold diameter: 160 mm, filter area: 8.25 m², total height: 1,950 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 3273 Extraction unit / dust extractor AL-KO Mobil-Jet 160 Used Dust extractor for extracting wood dust and chips Motor power 2.2 kW Nominal air flow rate 1850 m3/h Minimum air flow rate 1448 m3/h Extraction inlet Ø 160 mm Negative pressure 2120 Pa Filter area 8.25 m2 Air filter category G Pneumatic filter cleaning AL-KO OPTI JET Compressed air connection 8.5 bar Chip collection container approx. 320 l Base frame without wheels Suitable for wood dust separation, residual dust content class 2 (H2), max. residual dust content 0.2 mg/m3 Type 1 (B1), suitable for extracting combustible dust in Zone 11 BG-tested, GS-tested CE marking Suitable for indoor use Electrical connection 400 V / 50 Hz, three-phase Hfjdpfxez Ibgis Aaxjn Ready to plug in, including power cable and 16 A plug Transport dimensions approx. 1700 x 800 x 1950 mm LWH Weight approx. 200 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Used Hedpfoxn Tilsx Aaxefn For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2023, Equipment: CE marking, Nederman dust extraction system / silo dust collector with control unit and compressed air treatment Condition: very good, used for only 2 years from commissioning in 2023 to 2025, then dismantled due to factory closure. Application: Extraction and filtration of dust particles in silos and pneumatic conveying systems. Design: compact steel construction with integrated filter module. Filter cleaning: compressed air cleaning. Mounting type: roof mounting on silo. Application: industrial dust extraction, bulk solids handling, environmental technology. Filter type: cassette dust collector Type: MEP-2-6 Year of manufacture: 2023 Fan manufacturer: Nederman Type: FMZ 620 Year of manufacture: 2023 Power: 3 kW EX-protected Control unit manufacturer: Nederman Type: DFC-08M Article number: 5512680 Year of manufacture: 2023 Hfodpfx Aoyxvpfjaxsn Pressure vessel manufacturer: RECO Gesellschaft für Industriefilterregelung mbH Type: ST148-DN25-2V-8P Year of manufacture: 2023 Serial number: FA1049979-003 Maximum permissible pressure: 7 bar Permissible temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure test date: 2023-05 Control cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Compressed air treatment: Camozzi MC202-D00 Maximum inlet pressure: 16 bar Outlet pressure: 0.5–10 bar Maximum temperature: 50°C Electrical components: ABB control / connection housing Design: dust extraction system for silo applications with integrated filter unit and fan. Accessories / Scope of supply: Electrical control cabinet with control unit Compressed air treatment unit with pressure gauge Pressure vessel for pulse cleaning Fan with motor Pipe connection with weather protection grille Wiring and pneumatic lines Available quantity: 2 units Location: Kusel, Germany

Condition: used, No. 04489 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Hjdexnprcjpfx Aaxjfn Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,200 mm, total height: 4,250 mm, filter area: 286 m², suction capacity: 18,000 m³/h, negative pressure: 3,500 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-operated for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16 Year of manufacture: 2010 Cartridge filter elements, oval - DFO ULTRA-WEB FR - 16 pcs Filtration area: 286 m2 Fan power: 18.5 Kw Fan model: FR 501 Built-in frequency converter. Remote monitoring of the device is possible thanks to Donaldson's iCue technology. Capacity up to 18000 m3/h Hfedoz Ayv Uepfx Aaxsn Inlet diameter: 630 mm Noise silencer included. New filter elements, custom-made according to the device's intended use, are also available on request. Stock number: 1155

Condition: used, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, overall weight: 95 kg, input voltage: 400 V, volume flow: 1,100 m³/h, pressing: 2,250 Pa, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, Equipment: type plate available, KEMPER ProfiMaster IFA welding fume extraction system – year of manufacture 2018 – 400 V Manufacturer: KEMPER Model: ProfiMaster IFA Year of manufacture: 2018 With adjustable 3m arm For sale is a used, fully functional KEMPER ProfiMaster IFA welding fume extraction system. This unit is ideal for extracting welding fumes and grinding dust directly at the source and is designed for professional use in workshops and metalworking facilities. The system is in good condition. The filter was replaced on 10/06/2025, making the unit immediately ready for use. Technical data: Airflow rate: 1,100 m³/h Power supply: 400 V / 50 Hz Motor power: 1.1 kW Rated current: 2.3 A Maximum vacuum: 2,250 Pa Protection class: IP42 Control: 24 V Weight: 95 kg Continuous duty cycle: 100% IFA-certified design Features: Hodszg T A Aepfx Aaxefn 3m arm length Mobile design Filter monitoring Easy filter replacement via maintenance flap Robust industrial design Ideal for welding workstations Condition: Used Technically flawless Filter replaced on 10/06/2025 Safety inspection valid until 2026 (according to inspection sticker) All information is provided without warranty.

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean air extraction system with H3 certification Intake nozzle: 120 mm Motor rated power: 1.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow rate: 1,140 m³ / h Hfjdpfxjhkztwo Aaxjn Nominal air flow rate: 814 m³ / h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: In stock at warehouse 54634 Bitburg - immediately available -