Used Dürkopp Adler 867-190142-70M for sale (413)

Condition: new, machine/vehicle number: 1, empty load weight: 7,500 kg, maximum load weight: 22,500 kg, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 10,070 mm, loading space width: 252 mm, loading space height: 85 mm, suspension: air, tire size: 245.70 r 17,5, color: yellow, Year of construction: 2022, Equipment: ABS, tail-lift, New Ceylon two-axle semi-trailer, 10.70 m long, with the first axle liftable and the second axle steerable, EBS, air suspension, and 8-ton capacity side twist locks. It features mounting points and anchor slots on the platform for securing straps, double electro-hydraulic ramps with a total length of 4.0 m, and electro-hydraulic operation. The platform height from the ground is 85 cm, and the platform length is 7.0 m. WARRANTY and IMMEDIATE DELIVERY, subject to prior sale. Dealership: INTERDRIVE SRL-PARMA. Nljdpfxeh Utdls Ahfof

Condition: used, Year of construction: 2012, operating hours: 11,850 h, pressing force: 88 t, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, overall weight: 23,000 kg, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), For sale used baler + used conveyor brand: HSM VK 88 + Stadler KF1800 Baler is VK 88 R – FU, Frequency drives, 2 x 45 kw. * Unblocking cylinder option * Ball joint fixing main ram cylinder * Stadler conveyor 1600 mm internal Year 2012 11850 hours Rod main cylinder and seals kit new. To be replaced : 2 front chamber floor section : middle and front to the channel Greasing / changing: Few sides diabolos are used and running, some rusty, some in good condition. Baler is running good and bales tying is ok Ram wheels OK Ram side wheels OK Rod main cylinder : almost new Main cylinder seals kit : almost new Ram sides nylon strips : 80 – 90 % good. Finetune the geometry adding spacers ( customer has parts on stock) Knife/ counter knife : good, 70% Needles wheels : ok but change is preferred + the closing plates Main frequency drive 1 of 2 : in total 2 x 45 kW : one is out of order. I don’t know if it will be changed or not. Baler is running on one pump. Side walls chamber : Side walls are worn out where the nylon guiding plate are sliding : few millimeters up to 2 mm average. Nlsdpfsyuyg Ssx Ahfjf Conveyor : Chain rollers are used with a bit of play. Greasing is missing but still good condition. Guiding strips are ok Feeding cleats are worn out, almost all. Start/stop with frequency drive. Side walls ok on incline part and in pit. Wire coils platform : Not included.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, power of the servo motor: 5 W, pneumatic connection: 6 bar, Production capabilities and applications This automatic edging machine centralizes the complete finishing of quilts into a single operation. In practice, on your production line, you move from the quilted panel to the finished product without multiple handling steps between workstations. You can process white or colored quilts in various formats, with few intermediate adjustments. What truly changes in production is the consistent pace and the reduction in handling, which minimizes edging defects. Automated bias tape application system This machine is equipped with 2 MAR180059 devices dedicated to bias tape application. The bias tape is guided consistently thanks to the compensated foot-driven system, which ensures secure stitching on the varying thicknesses of a quilt. Indicative production rate: 60 sec/piece Bias tape width: with Pegasus head, max 45mm / min 30mm Quilt dimensions: from 1x1m to 2.6x2.6m (standard) Table dimensions: 3000x4000 mm Power supply: 380V 50Hz Installed power: 5 kW Compressed air: 6 bar, approx. 6-8 L/piece Nledpfx Ahjzmpvlsfjf Two versions available: lockstitch (Dürkopp 867 head) or chain stitch (Pegasus EXT3216H head modified by Rimac) Programming via touchscreen, automatic dimension recognition, application of one or two labels, thread/label/bias tape monitoring with alarm, integrated waste suction.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Raytools, controller model: Raytools, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser power: 3,000 W, laser wavelength: 1,080 nm, punching diameter: 1 mm, stroke rate (min.): 60 1/min, stroke rate (max.): 65 1/min, working length: 3,000 mm, working width: 1,500 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 9 mm, sheet thickness brass (max.): 7 mm, sheet thickness copper (max.): 7 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 2,200 kg, total length: 3,100 mm, total width: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, safety light barrier, The Digima F1530 3kW is an advanced open-type fiber laser cutting machine designed for precise sheet-metal processing in manufacturing plants, metalworking companies and modern fabrication workshops. It is intended for businesses that require high cutting quality, strong performance and stable, repeatable operation in every Nsdozlr Syspfx Ahfolf The Digima F1530 3kW is equipped with branded components that enhance durability and cutting performance. The machine includes a RAYCUS laser source, a Raytools AUTO FOCUS cutting head, a Raytools control system, a Schneider servo system, a Japanese Shimpo reducer, H-class linear rails and an industrial TONGFEI / S&A cooling system. The entire unit is built on a heavy-duty industrial steel frame that has been heat-treated for improved stability and long-term resistance to deformation. The machine also provides flexible use of assist gases, allowing the cutting process to be adapted to the material type and the expected edge quality. Oxygen at 1 MPa can be used for carbon steel, nitrogen at 2.5 MPa is intended for stainless steel and aluminium, and compressed air at 1.4–1.6 MPa offers a more economical option for thinner parts. This gives the user better control over cutting quality, process speed and operating costs. As standard, the machine includes features that improve operator safety and protect key components. A laser-head cover helps protect the cutting head from dirt and mechanical damage, while safety barriers create an additional protective zone around the working area, improving safety during intensive production work. The Digima F1530 3kW is powered by a 3P 380 V / 50 Hz supply, and the machine itself weighs 2000 kg. It is a modern and efficient fiber laser cutter for companies looking for a solution that combines a large working area, high precision, fast operation and industrial-grade durability. This model is a strong choice wherever reliable production, high cutting quality and future production growth are important.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Smart Line, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 180 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, power: 11 kW (14.96 HP), input voltage: 400 V, number of digital displays: 1, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, DIGIMA W12-8x3200 Hydraulic Four-Roll CNC Plate Rolling Machine The DIGIMA W12-8x3200 is a hydraulic four-roll CNC plate rolling machine designed for accurate, repeatable and efficient sheet-metal forming. With a working width of 3200 mm, it is suitable for producing large cylindrical parts, sleeves, pipes, curved sections, housings, tanks and other technical components used in metalworking, steel construction, ventilation, machinery manufacturing and industrial production. The four-roll system provides a major advantage over conventional three-roll machines. The sheet is held securely between the upper and lower rolls, while the two side rolls perform the pre-bending and rolling operations. This arrangement allows both edges of the sheet to be pre-bent without removing and turning the workpiece, reducing handling time and limiting the length of straight sections left at the ends. The result is improved repeatability, higher productivity and more consistent part geometry. The W12-8x3200 can roll sheet metal up to 8 mm thick and perform pre-bending up to 6 mm. Its 3200 mm working length enables the processing of wide sheets for both one-off jobs and series production. The upper roll has a diameter of 210 mm, the lower roll 190 mm, and the side rolls 180 mm. The minimum rolling diameter is 400 mm, allowing the machine to produce a wide range of cylindrical and curved components. The hydraulic drive ensures smooth, stable movement and reliable clamping force throughout the forming process. The 11 kW motor provides the power required for regular industrial operation, while the rolling speed of 4 m/min supports efficient production without compromising process control. The rigid machine body and carefully arranged roll system help guide the material accurately and reduce unwanted deformation. Computerised CNC control makes the machine convenient to set up and operate. The operator can control roll movements, monitor the forming process and reproduce previously established settings for recurring jobs. This is especially useful in batch production, where the same diameter, radius and dimensions must be achieved repeatedly. The control panel also helps reduce setup time and simplifies everyday machine operation. The operating sequence is straightforward. First, the sheet is inserted and stabilised between the rolls. The side rolls then pre-bend the sheet edges, minimising flat ends. Finally, the material is passed through the roll system until the required tube, sleeve, arc or cylindrical shape is obtained. The machine can also be used for forming conical components by applying a controlled inclination of the rolls. Thanks to its wide working capacity and computer-controlled operation, the machine can be used in flexible workshop production as well as organised manufacturing processes. It is suitable for companies producing ventilation ducts, structural elements, machine covers, tanks, steel sleeves and custom-made components. Repeatable CNC settings are particularly valuable when several identical parts must be formed with the same diameter and curvature. Nsdoznw T Uopfx Ahfslf

Condition: new, Hans Schreiner metal bandsaw with pivoting cutter arm, for the professional, with soft hydraulic for the correct pressure, electrical coolant system for all kind of metals, steels and Nirosta, quick clamping vice automatic cut stop, the semi-automatic control with preprogrammed cycle (user starts - clamping workpiece - cutting - saw arm resetting - unclamp workpiece) is optional at the MBS370SA for metal worker and workshops with small - and mass serial products. Strengthened frame for more stability. CE conform Motor: 400V,50Hz Reduce gear rate: 25:1 Nlodpfx Ahsvrv Dqjfef Wheel diameter: 380mm Blade size: 3160x27x0.9mm Blade speed: 34 or 68 m/min Cutting angle: 45°L, 30°L, 15°L, 0°, 15°R, 30°R, 45°R, 60°R Coolant pump: 400V, 50Hz, 3~, 25W Packing size: 1770x765x1120mm Weight: 365 kg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: C3030, type of input current: three-phase, total width: 1,900 mm, total length: 4,200 mm, input voltage: 400 V, input current: 50 A, feed length X-axis: 1,700 mm, feed length Y-axis: 1,700 mm, feed length Z-axis: 300 mm, working width: 1,700 mm, total height: 850 mm, repeat accuracy: 0.1 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 1 m/min, cutting width (max.): 1,700 mm, cutting height (max.): 80 mm, compressed air connection: 6 bar, Complete Textile Cutting & Spreading Equipment Line – KURIS, ZSK & MAYER – Automatic Cutter, Spreading Machines, Presses Professional textile production equipment available for sale, including automatic cutting systems, spreading machines, embroidery equipment, industrial presses, and accessories. All machines were used in industrial garment production and are available for inspection. Also available more than 200 sewing,ironing machines (Juki, Durkop Adler, Veit) Contact for more info. Location: Ruse, Bulgaria Delivery terms: EXW (Incoterms 2020) All prices are net prices (excluding VAT, dismantling, loading, and transport). Cutting Equipment 1 × KURIS C3030 Automatic Cutter KURIS automatic CNC textile cutting system. Like new condtion always serviced with original parts installed October 2019 Main Specifications Working width: 1700 mm Cutting height: up to 80 mm Automatic servo cutting system Vacuum table Industrial CNC control Suitable for textile and technical fabrics Set Price: EUR 45,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter KURIS band knife machine Set Price: EUR 9,000 Complete Spreading & Cutting Set: 1 × KURIS Pionier 322352 spreading machine 1 × KURIS Quick Lift 320919 fabric roll lifting machine 20-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 8,000 Cutting & Spreading Set: Nodpsy Tp Siefx Ahfolf 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Cutting & Spreading Set: 1 × KURIS Quick Lift 320919 fabric roll lifting machine 17-meter air-blowing spreading table KURIS automatic servo cutter Set Price: EUR 6,000 Spreading Tables: 1 × 10-meter spreading table Price: EUR 500 1 × 8-meter spreading table Price: EUR 500 Plaid Fabric Cutting Table with Awl Special table for precise plaid/check fabric alignment and cutting. Price: EUR 2,500 Embroidery Equipment 1 × ZSK 10-Head Embroidery Machine Industrial multi-head embroidery machine by ZSK. Price: EUR 5,000 Pressing Equipment 1 × MAYER RPS-M 1000 Press Mayer industrial pressing machine. Price: EUR 8,000 1 × MAYER AHV-BM 1370 Press Price: EUR 4,000 1 × MAYER APM-1150 Press Price:EUR 4,000 Additional Information feel free to contact me (Viber,Whatsapp) Machines can be inspected under power Professional dismantling available upon agreement Loading assistance available Transport can be arranged separately Suitable for garment factories, textile manufacturers, upholstery production, and industrial textile processing All prices are net prices (excluding VAT, dismantling, loading, and transport) Contact: G. Jordanov Location: Ruse,Bulgaria

Year of construction: 1997, condition: ready for operation (used), Offered is an automatic fitting drilling machine. Workpiece size L: 100-1350mm, W: 100-600mm, d: 16-25mm, operating pressure: 6-7bar, extraction air speed: 30m/s, extraction volume flow: 70m³/min, working height: 1000mm, traverse speed X-axis: 60m/min, traverse speed Y-axis: 50m/min, control system: Ferrocontrol CNC. Equipped with vibratory feeder for hinges, spiral vibratory feeder for buffers, drilling and insertion units, light barrier monitoring. Weight: approx. 6000kg, overall dimensions X/Y/Z: approx. 5500mm/2200mm/2400mm. Inspection possible by arrangement. Nljdpfxey Ulmfj Ahfef

Condition: used, A Linck chipper canter line for continuous chipping, turning, profiling and sawing of round timber as well as for the production of main products and side boards is offered. 1) LINCK V30 chipper canter, feed speed: 50m/min/70m/min, drive power: 2 × 132kW, min. log diameter: 80mm, max. log diameter: 360mm, cutter heads: 18 chipping knives and 18 finishing knives, max. output: 1000fm/24h, 2) Linck DVN 55 turning device, function: turning and positioning of the preprocessed round timber between the chipper canter stages, 3) Linck V25 chipper canter, max. feed speed: 70m/min, drive power: 2 × 132kW, cutter heads: 18 chipping knives and 18 finishing knives, 4) Linck VPP 34 profiling unit, three-phase motors: 4, power: 32kW/50kW, speed: 1000rpm/1500rpm, feed: 4 geared motors, feed motor power: 1.3kW/2kW, max. feed motor speed: 66rpm, function: profiling of the side boards before the sawing process, 5) Linck VS 66 saw unit, three-phase motors: 4, power: 66kW/motor, speed: 3000rpm, fixed saw spacing: 24mm for 4 side boards. The chipper canter line will be available from January 2027. An on-site inspection is possible. Nsdpfozvy Eijx Ahfelf

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702018968, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Perm. / technical gross weight: 27,000 kg Perm. / technical payload approx.: 23,000 kg Perm. / technical axle load: 16,000 kg Perm. / technical fifth wheel load: 11,000 kg Unladen weight approx.: 4,000 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation measurement approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Chassis: Spedition semi-trailer frame Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened! 14 pairs of lashing rings, each rated to 2.5 t 24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer Without support legs Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Braking system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket front, without connection cable Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly! With raise & lower valve Vehicle stability system Njdpfx Aey Rxmwohfolf Wheels and Tyres: 385/55 R19.5” – make according to manufacturer’s choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber tail lights, amber LED side marker lamps 2 white position lights at the front with protective bar 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor: Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front bulkhead/corner posts: 25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers Approval / Markings: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for one-line license plate holder Warning sign according to ECE-70 Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red Painting: Frame: RAL 3002 carmine red Landing gear: Black coated The images shown are archive photos! The vehicle may currently be in use!

Condition: used, mileage: 227,000 km, power: 353 kW (479.95 HP), first registration: 01/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 6,700 mm, loading space width: 750 mm, Year of construction: 2016, Equipment: ABS, air conditioning, crane, MAN TGS 33.480 Fahrgestell 6,70 m / 6x6 Imported / Accident-FREE IN GOOD CONDITION! Nodpoy U Sy Sefx Ahfslf ? YEAR OF PRODUCTION: 2016 ? MILAGE: 227 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? AIRCONDITION ? POWER STEERING ? TACHOGRAPH ? RETARDER LOADING SPACE: 670 TOTAL WEIGHT: 26 000 kg TIRE SIZE: 315/80R22,5 WHEELBASE: 390/140 cm SUSPENSION: SPRING TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 49177

Condition: used, Year of construction: 2008, operating hours: 630 h, lifting height: 9,700 mm, Drivetrain Drive: Wheel Weights Empty weight: 2.300 kg Functional Working height: 1.170 cm Dimensions of cargo space: 230 x 120 x 220 cm CE mark: yes History Number of owners: 1 Nljdpfjzayyijx Ahfsf Condition General condition: average Technical condition: average Visual appearance: average Additional information Please contact Bas Sindorf for more information

Condition: used, maximum load weight: 11,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2021, loading space length: 7,800 mm, loading space width: 2,500 mm, loading space height: 2,290 mm, loading space volume: 45 m³, Year of construction: 2021, Equipment: ABS, tail-lift, 2-axle refrigerated box trailer 7.70 m with swing doors + BÄR tail lift 2 t * CARRIER VECTOR 1550 (diesel engine) and stationary cooling 380 V electric * Vehicle number for customer inquiries: 4396 * EBS * Air suspension * Tail lift * Anti-lock braking system (ABS) * Full service history * Temperature recorder * ALCOA alloy wheels * Disc brakes * New general inspection (HU/AU)! No liability for printing or typing errors Sale to trade customers only Subject to prior sale and errors. Amendments, prior sale and errors expressly reserved. The description is for vehicle identification purposes only and does not constitute a guarantee in accordance with sales law. The description in the purchase contract is binding. * TOP SERVICE + QUALITY * We are happy to provide a LEASING-FINANCE-RENTAL PURCHASE offer Guarantee insurance available on request from the insurer * TÜV / UVV LBW / tachograph inspection and installation of OBU device by our local partners * Export license plates for 30 days All export documents can be provided by request * Toll for Toll-Collect can be booked in-house * Free transfer from Stuttgart airport or Metzingen (Württ) train station * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas Njdpfew S Ru Iex Ahfolf WHATSAPP number * * ---- Visit our website at * always over 200 vehicles in stock

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003406, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 10/2013, next inspection (TÜV): 01/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross vehicle weight: 27,000 kg Payload approx.: 22,200 kg Axle load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- build tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, mounting plate with replaceable 2" king pin 13 pairs of lashing rings recessed in outer frame, each rated 2.5 t Nlodpfx Aoy Sk Rqehfjf Outer frame with “Load-Lock profile” for securing straps 24 t two-speed landing gear, single side operation, with flat base plate, without compensating slide Chocks with holder Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards Document box on front wall, left-hand side (mounted slightly sloped) Axles & Suspension BPW disc brake axles Air suspension Braking System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, no connecting line EBS, Electronic Braking System, with EBS socket at front, without connecting cable Attention: The trailer may only be towed by tractor units equipped with functional ABS! With lift and lower valve Vehicle Stability Control System Wheels and Tyres 385/55 R19.5” – make at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt; multicompartment rear lights (3 sets of older Hella lights still available at plant for optional installation); lateral yellow LED markers recessed as far as possible 2 white front position lamps, each protected by 12 mm round bar welded over the top 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Floor Approximately 30 mm phenolic plywood, cross joints with Omega insert, laid on longitudinal supports for high point-load capacity, suitable for forklift axle load up to max. 7,100 kg Note: Floor warping due to weather exposure possible! Front bulkhead / Corner posts Approx. 1,200 mm high, corner posts made of volumetric steel Approval / Plates Country of registration: Germany With Dekra inspection and report 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective strips in accordance with ECE R 048, white (sides) and red (rear) Paintwork Chassis: RAL 3002 carmine red Landing legs: Black coated Front bulkhead: RAL 3002 carmine red Attention: The images are archive photos! The vehicle may currently be in use!

Condition: used, mileage: 399,000 km, power: 213 kW (289.60 HP), first registration: 01/2009, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, loading space length: 4,700 mm, loading space width: 2,350 mm, loading space height: 700 mm, Year of construction: 2009, Equipment: ABS, air conditioning, crane, parking heater, Mercedes AXOR 1829 / 4x2 KIPPER 4,70 m Accident-FREE Nodpfx Asy Hn Amehfelf IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 399 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? ENGINE BRAKE ? TACHOGRAPH Tipper: 470 x 235 x 70 cm (L x W x H) CAPACITY: 10 000 kg TOTAL WEIGHT: 19 000 kg WHEELBASE: 390 cm TIRE SIZE: 13R22,5 SUSPENSION: SPRING TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: new, neu ca. 4 Monate ab Auftragse Italien 20800 € 399.36 € 70 to horizontal verschiebbar 500 mm 700 mm 900 mm 20 mm/s 2 mm/s 1700 mm 1000 mm 2400 mm 1050 kg HORIZONTAL MOVABLE CYLINDER550 MM 2 speeds Nlodpfxoypbuyj Ahfef control by handwheel and push button (2-hand) adjustable max. pressure manometer according to CE regulations user manual in GERMAN and ENGLISH (sample photo)

Condition: used, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 2452578, power: 0.87 kW (1.18 HP), load capacity: 250 kg, lifting height: 15,700 mm, platform length: 2,270 mm, platform width: 1,120 mm, overall weight: 3,220 kg, transport length: 2,480 mm, transport width: 1,190 mm, transport height: 2,220 mm, fuel type: electric, tire size: 381 x 127 mm, color: red, Equipment: UVV, Technical data Year of manufacture: 2021 Motor: Electric 2x24VAC / 0.87 kW Working height: 15.70 m Platform height: 13.70 m Platform extension: 0.90 m Platform dimensions (LxW): 2.27 x 1.12 m Overall dimensions (LxWxH): 2.84 x 1.19 x 2.75 m Max. load capacity: 250 kg Load capacity when extended: 113 kg Max. climbing ability: 25% Nlodpfeyqy Dvex Ahfef Travel speed: 0.8 - 5.0 km/h Weight: 3,240 kg Tyres: 381x127 mm non-marking tires Fully functional, general signs of use, UVV

Condition: used, mileage: 371,000 km, power: 353 kW (479.95 HP), first registration: 09/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 5,700 mm, loading space width: 2,500 mm, loading space height: 800 mm, Year of construction: 2009, Equipment: ABS, air conditioning, crane, MAN TGS 33.480 / 6x4 KIPPER 5,70 m + CRANE + REMOTE CONTROL Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 371 000 km EQUIPMENT: ? ABS ? ASR ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? ENGINE BRAKE ? TACHOGRAPH ? AUTOMATIC AIRCONDITION PLATFORM: 570 x 250 x 80 cm (L x W x H) Nlodpfx Ahov D Ap Djfsf CAPACITY: 11 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 420/139 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: PALFINGER PK 23002 + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 30166

Year of construction: 2025, condition: new, Horizontally cam driven and intermittent operating packaging machine for the automatic production, filling and sealing of flat pouches with regular or irregular shape and with a spout on top. 3 side sealing or 4 side sealing adjustable. Suitable for middle-sized bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). One bag is handled per machine cycle. Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(80-225)xW(50-180)mm; filling capacity: max. 400ml; max. speed of the machine in neutral: 70 cycles/minute; 5.5kW; 15m³/h; machine dimensions: (L)4500x(W)970x(H)1500mm; weight: 1800kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and/or other modules (such as conveyor etc.) shown on the picture are optional modules to this position and only depicted for demonstration purposes. The machine is suitable for variety of composite films. We gladly verify and confirm on basis of sampling the compatibility of the respective composite film. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Nledpfx Ahsv Nlu Hefsf Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, This UV printer replaces conventional laser printers – it also enables color printing on glass, wood, textiles, plastic, metal, and many other materials. New model: PS10157V Nledpfx Asd Hydhehfef CMYK, LC, LM + white + varnish option included Print head: Epson TX800 2690 dpi max. Includes software for printer control and image editing Dimensions: 2.30 x 1.98 x 1.34 m Weight: 650 kg 360-degree printing: bottles/round objects (additional cost) A1+ size 100x150 cm and 170 mm printing height 8 x 500 ml ink can be supplied! (additional cost) + VARNISH FUNCTION included Software settings and printer explanation available on request. Available throughout Germany/Europe. (additional cost) Printing videos, etc. can be sent by email/WhatsApp upon request.

Condition: new, Heidenhain ULS 300/20 length measuring scale. 239 740-02 ML 270 mm, serial number as shown in the photo, unused, rubber cuff defective (porous), 100% functional. Nodji Eazuepfx Ahfolf

Condition: good (used), Hydraulic cylinders, telescopic cylinders, telescopic hydraulic cylinders -Design: single-acting telescopic cylinder -Retracted length: 750 mm -Extended length: 2920 mm -Stroke: 2170 mm Nsdpfeb A Hmuex Ahfolf -Piston rod diameter: 86/107/129/152 mm -Outer diameter: 180 mm Quantity: 1 piece available -Dimensions: 500/500/H750 mm -Weight: 190 kg

Condition: used, fixed cowl /5155 Dimensions, see last photo SPH 370 mm Nedpfxjdb Unvo Ahfslf Inner diameter 320 mm Overall height 860 mm Overall width 830 mm Base width 500 mm Base depth 170 mm

Condition: good (used), crane block, pulley, rope pulley, steel rope pulley, rope pulley, crane, pulley block, rope pulley with pulley block, wire rope pulley block -Rope pulley: Rope pulley 1 grooved Ø 270 mm -Rope width: mm -Hole: Ø 62 mm -Quantity: 15x rope pulley available -Price: per piece Nlsdpfx Ajrkp Nuohfof -Dimensions: Ø 270 x 31 mm -Weight: 1.8 kg/piece

Condition: used, functionality: fully functional, machine/vehicle number: H2X386X01800, Year of construction: 2020, operating hours: 1,829 h, load capacity: 2,000 kg, lifting height: 5,070 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-Wheel Forklift Chassis number: H2X386X01800 Load center: 500 Mast type: Triplex Condition: Like new Technical condition: very good Description: Linde E20PH-02 electric forklift. Manufacturer: Linde. Model: E20PH-02. Year of manufacture: 2020. Operating hours: 1,829 h. Load capacity: 2,000 kg. Drive: Electric 48 V. Equipment: Triplex mast, overall height 2,300 mm, fork positioner, side shift, work lights, solid tires. The Linde E20PH-02 is in very good condition and impresses with its compact design and excellent Linde driving performance. Thanks to the triplex mast, fork positioner and side shift, the machine is ideal for demanding storage and logistics tasks. The low overall height of only 2,300 mm allows it to be used even in halls with limited headroom. The charger can be ordered separately upon request. Inspection and test drive possible by appointment. Linde E20PH-02 Electric Forklift Manufacturer: Linde Model: E20PH-02 Year of manufacture: 2020 Njdpfx Aszcrv Uohfolf Operating hours: 1,829 h Capacity: 2,000 kg Drive: 48 V Electric Equipment: Triplex mast Overall height 2,300 mm Fork positioner Side shift Working lights Solid tires This Linde E20PH-02 is in very good condition and offers the well-known Linde driving comfort and productivity. Equipped with a triplex mast, fork positioner and side shift, the truck is perfectly suited for warehouse and logistics applications. The low overall height of only 2,300 mm allows operation in buildings with restricted access heights. A charger can be supplied on request. Viewing and test drive possible by appointment. Side shift, fork positioner, 4th valve, partial cabin