Used C&U Ball Bearing for sale (74,957)

Condition: ready for operation (used), Year of construction: 2015, controller manufacturer: KUKA, This KUKA KR270 R2700 C ultra MED robot arm was manufactured in 2015. Ideal for precise automation tasks, it offers robust performance and reliability. Contact us for more information. Additional equipment • Resolver Cable: 16m • Motor Cable: X7.x flexible, 15m; X30 flexible, 15m • Three-phase Servo Motor: TYP-K/1FK7103 • Reference Switch Assembly: 25m angled / Reference Switch Unit: Cable trailing 15.0m • Adjustment Equipment Set for Additional Axes • SmartPAD: 1.0 / SmartPAD Holder: Medweiß 610 / Extension Cable SmartPAD: 25m and 10m • Scope of delivery: Robot, control cabinet & cable. Machine Benefits Technical Machine Benefits • Production hours: less than 1000 machine hours • Positioning robot: kr c4 / special paint finish: mechanics and base / cooling: standard medwhite 610 / krc4 basic enclosure: eu medwhite / disconnector: 8 kva 380/400/440-400/230v, 25a • Mains supply: eu han6 transformer 8 kva mbc / enclosure paint: siemens white 610 /labeling set: de/en kr c4 • Ethernet interface: x67. 1-3 / reference switch interface: x42 / external power supply interface: x55 / csp standard: 2xusb3. 0 / rj45 - ksi • Controller: mcc-30s med / kss: 8. 3/ safe operation: 3. 2 / ethernet krl: 2. 2 / robot sensor interface: 3. 2 / remote service: 1. 1 / profinet controller/device: 3. 1 Pedpfx Aijzvv E Socsgr • Load: 270 kg / range: 2696 mm

Condition: new, Balluff BIS00A9 BIS C-602-019-xxx-03-KL2 24 Vdc evaluation unit with BIS C-670-00,3 cable and BCC011N connector, unused, 100% functional, delivery as per photos. Psdoy Np Enjpfx Aicsgr

Year of construction: 2015, condition: ready for operation (used), A surface roller coating machine Trivec including a custom-built distributing unit with 6 units for oil and varnish application is available. Working width coating machine/distributing unit: 450mm/350mm, coating and metering stations: 2, feed rate: 20m/min, machine dimensions X/Y/Z: approx. 4000mm/700mm/1650mm. An on-site inspection is possible. Pgsdpfsynltdsx Aicor

Year of construction: 1998, condition: ready for operation (used), A complete sawmill including all peripheral equipment and conveyor units is available. 1) Log yard: Baljer & Zembrod Asterix sorting carriage, year of manufacture: 1998, operating hours: 16382h, rail system type: double-T-beam, rail system length: 66m, cross conveyor dimensions X/Y: 7300mm/3300mm, log train length: approx. 40m. Including cut-off table with scraper conveyor. The running rails of the rail system were renewed approx. 5 years ago. 2) Sawmill: 2.1) Linck U71 frame saw in reinforced design with larger main bearing and a general overhaul carried out in 1995. 2.2) Linck VAK carriage. Linck Vy auxiliary carriage in heavier-duty design. 2.3) Möhringer butt log reducer. 2.4) Linck splitter wedge. 2.5) 2x Diemer edging saw units, passage width: 500mm. 2.6) Dankert band saw, wheel diameter: 1200mm. 2.7) Hydraulic log carriages with 3 clamping supports, cutting length range: approx. 1800mm-5000mm. 2.8) Various roller conveyors. 2.9) Various cross conveyors, vibration troughs, etc. 3) Saw service room: 3.1) Albert sharpening machine with flank grinding for band saws. 3.2) Oppliger straightening machine for band saws. 3.3) Rolling bench for band saws. 3.4) Vollmer CNE sharpening machine for circular saws. 3.5) Meinert manual setting machine for circular saws. 4) 2x Hildebrand Brunner drying chambers, volume: approx. 30m³-60m³. 5) Schmid wood chip heating system, year of manufacture: 1995, heating output: 450kW. 6) Manitou rough-terrain forklift. 7) Lewecke vacuum lifting machine. This is a complete sawmill. Documentation available. An on-site inspection is possible. Pgedpfx Aszf Nbxsicor

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table length: 1,600 mm, table width: 1,400 mm, table load: 3,500 kg, Equipment: documentation/manual, 5-axis CNC Universal Machining centre, simultaneous Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 x Maximum workpiece diameterxheight: 1950x1100 mm Movement X-axis: 1800 mm Movement Y-axis: 2000 mm Movement Z-axis: 1100 mm C-Axis table rotation: 360 ° B-Axis travel: -7 / 187 ° Spindle Speed: 18000 1/min Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazin capacity: 120 Required floor space: 11200x12300 mm Height: 4375 mm Weight: 58000 kg Pgsdpfx Aijzauxgecjr If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: used, Injection molding machine ARBURG, Type Allrounder 320 C 600-100 Serial No. 189356, Year of manufacture 09/2002 Clamping force 60 tons Screw diameter 25 mm Dosing volume max. 49 cm3 Injection pressure max. 1570 bar Opening stroke - platen stroke max. 350 mm Platen dimensions 446 x 446 mm Tie bar spacing 320 x 320 mm Mold height min.: 200 mm Platen spacing min.: 200 mm Platen spacing max.: 550 mm Centering of fixed and moving platens 125 mm Heater power 4.9 kW Motor power hydraulic pump 15 kW Mains connection 400 Volt, 50 Hz, 19.9 kW - Machine control SELOGICA - Two controllable hydraulic circuits for core pullers - Injection unit with COLORTRONIC material hopper for automated granule feed - U-version interface - HHG interface - Control ARBURG MULTRONICA with foil keypad and integrated display - 88790 operating hours recorded (power-on hours) - 44925 operating hours of the hydraulic pump (hydraulic on) - Control cabinet fixed to the machine - Work area protective doors at the front and rear, manually sliding with safety switches - Mobile control panel with function keys, mounted on the back of the machine Pgedpfx Ajzqglroicor Space requirement L x W 3650 x 1700 mm Height with material hopper 2200 mm Weight 3000 kg Good condition

Condition: ready for operation (used), Year of construction: 2019, clamping force: 400 kN, overall weight: 2,180 kg, controller manufacturer: ARBURG, controller model: SELOGICA direct, Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details. Pgodozvm Azjpfx Aicjr - Control System: SELOGICA direct- Clamping Force: 400 kN- Opening Force: 130 kN- Opening Stroke: max. 350 mm- Mold Mounting Height (min.): 200 mm- Platen Distance (max.): 550 mm- Distance Between Tie-Bars (H x V): 270 x 270 mm- Size of Mold Platens (H x V): max. 446 x 446 mm- Weight of Movable Mold Half: max. 180 kg- Ejector Force / Stroke: max. 30 kN / 125 mm- Dry Cycle Time (EUROMAP): 1.2 - 189 s-mm- Injection Unit Size: 100- Screw Diameter: 20 mm- Effective Screw Length (L/D): 25- Screw Stroke: max. 100 mm- Calculated Stroke Volume: max. 31 cm³- Shot Weight (PS): max. 29 g- Material Throughput (PS / PA6.6): max. 5.5 kg/h / 2.8 kg/h- Max. Injection Pressure: 2500 bar- Max. Holding Pressure: 2500 bar- Max. Injection Rate: 64 cm³/s- Max. Screw Torque: 120 Nm- Nozzle Contact Force / Retraction Stroke: max. 50 kN / 180 mm- Heating Capacity: 4.95 kW- Hopper Capacity: 1.8 L- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor / Heating Rated Current: 42 A / 11 A- Total Rated Current: 53 A- Total Connected Load: 29 kW- Pump Motor Power: 11 kW- Hydraulic Oil Capacity: 165 L- Net Machine Weight: 2,180 kg

Year of construction: 1990, condition: like new (used), Make: Imball Type: Linear Hotmelt Cardboard Multipacker Model: Multipack 200R P340 Dx Serial number: 909080040 Year: 2001 Capacity: up to 180 multipacks per minute Tooling: Cans with a diameter of 73 mm, packed in groups of 3 (various package sizes possible: 1, 2, or 3 packs) Range: Can diameter 55-100 mm Can height 35-180 mm Podpsfx R Rtofx Aicsgr Frame: Aluminum / Steel, coated Dimensions: L x W x H = 6500 x 1300 x 2600 mm Weight: 2500 kg Power: 380V 3P+N+E, 50Hz, 10 kW Air pressure: > 6 bar Features: Siemens PLC and touch panel

Condition: used, Year of construction: 2023, Tandem axle Air brake PTO shaft 20-piece / Varioterminal 9-inch bale chute / / Psdetlrnaepfx Aicegr

Condition: ready for operation (used), Year of construction: 1998, Working width: 650-1305mm, exception PET/ALU/PE and ALU/PE: max. 1100mm, production speed: 120-220m/min, max. operating speed: 300m/min, max. primary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, adhesive application 2K for film/film: approx. 1.5-2.5g/m², 1K for paper/film: approx. 2.5-4g/m², max. secondary unwinding roll diameter: 1000mm, core inner diameter cardboard core: 76/152mm, steel core: 150mm, max. rewinding roll diameter: 1200mm, core inner diameter cardboard core: 152mm, steel core: 150mm, processable materials, min. polyester film: 10µm, min. aluminum foil: 6.6µm, min. PE film primary unwinder: 40µm, min. PE film secondary unwinder: 30µm, max. paper: 150g/m², length: 8625mm, complete documentation vorhanden. An on-site inspection is possible. Pedpfx Aioy Uydfscjgr

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings, thrust bearings, linear ball bearings -Linear ball bearings -Inner diameter: 30 mm -Outer diameter: 47 mm -Length: 68 mm -Price: per piece Podpsfgyf Iefx Aicogr -Quantity: 117 pieces -Weight: 0.3 kg/piece

Condition: used, Year of construction: 2005, functionality: fully functional, working width: 910 mm, grinding width: 910 mm, overall weight: 1,000 kg, grinding height: 160 mm, working height: 160 mm, height adjustment type: electric, type of input current: three-phase, - After technical inspection - Czech production - Year of manufacture 2005 TECHNICAL SPECIFICATIONS: Pgjdjzinr Depfx Aicjr - Working width 910 mm - Height of workpiece 3-160 mm - Main motor 11 kW - Total machine power 12 kW - Shoe - Electric height adjustment - Automatic star/delta switching - Ammeter - Oscillation using an opto-electronic sensor - Table positioner - Working pressure 5.5/7 bar - Two feed speeds 4.5/9 m/min - Rubber pressure rollers - Pneumatic disc brake for the main motor - Diameter of dust extraction nozzle 140 mm Machine dimensions: - Length 160 cm - Width 160 cm - Height 220 cm - Weight 1000 kg

Condition: good (used), Year of construction: 1994, Ref. no.: 17540 Manufacturer: ARBURG Type: 270 C 500-100 RUNHOUR Only 100 Year of construction: 1994 Clamping unit Clamping force: 50 ton Opening stroke: 350 mm Distance between tie bars: 270 X 270 mm Mould height min.: 200 mm Platen size (h x v): 405 X405 mm Injection unit Screw diameter: 25 mm Injection volume: 67 cm³ Shot weight: 61 g Injection pressure: 2500 bar Pjdpoyiz U Tsfx Aicegr Measurements and weight Dimensions: 3,3 X 1,5 X 2,0 m Machine weight: 2400 kg Further information: Laboratory Machine with Exceptionally Low Operating Hours The offered ARBURG 270 C 500-100 was manufactured in 1994 and originates from the training and laboratory department of a university. The machine was not used in regular production and was mainly operated for educational and testing purposes. The control system shows only approximately 100 operating hours and just 867 machine cycles. The machine is equipped with a hydraulic drive system and the proven ARBURG Dialogica control unit. In addition, it features an integrated crane system to facilitate mould and component changes. The scope of supply also includes an unused spare screw with a diameter of 15 mm and a complete additional plasticizing unit, providing extra flexibility for different applications. Due to its exceptionally low usage, documented history, and valuable additional equipment, this machine represents a rare opportunity on the used machinery market.

Condition: good (used), Year of construction: 1988, functionality: fully functional, total height: 1,800 mm, total length: 2,550 mm, total width: 1,600 mm, overall weight: 4,300 kg, Model: MAZAK QUICK TURN 15-U Year of manufacture: 1988 Control system: Mazatrol CAM T2 Working area: max. swing diameter: 440 mm max. turning diameter: 270 mm max. turning length: 500 mm bar work up to a diameter of max. 51 mm Main spindle: speed range: 36 – 3,600 rpm main drive power: 15 kW constant torque: 230 Nm spindle nose: A2 – 6 inches spindle bore: 61 mm Tool turret: standard version: 8-position turret indexing time: - 1st station: approx. 0.5 s Travel ranges: turret – travel range: x-axis: 155 mm z-axis: 510 mm Rapid traverse rate: x-axis: 12 m/min z-axis: 24 m/min Tailstock: tailstock travel: 460 mm tailstock spindle: MK 4 tailstock quill stroke: 130 mm Machine data: Psdpfx Aijzvf H Sjcsgr total connected load: 31.3 kVA machine weight: 4,300 kg machine dimensions: L x W x H: approx. 2.55 x 1.60 x 1.80 m

Condition: ready for operation (used), Year of construction: 2004, operating hours: 48,702 h, functionality: fully functional, machine/vehicle number: 16261, travel distance X-axis: 650 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Siemens Sinumerik 840 D pl , spindle speed (max.): 28,000 rpm, TECHNICAL DETAILS Travel Paths X-axis travel: 650 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Main Spindle Spindle speed range: 20 – 28,000 rpm Spindle drive power: 23 / 18 kW Max. torque: 79 Nm Tool taper: HSK-A63 NC Rotary Swivel Table Clamping surface: Ø 630 mm Psdpfxjxbz A Hj Aicsgr Swivel range A: +30° / -115° Rotatable C: 360° Max. table load: 500 kg Max. workpiece dimensions: Ø 630 x 313 mm Table rotation speed A: 25 / C: 65 rpm Tool Changer Number of tool stations: 117 Max. tool diameter: 90 mm Max. tool length: 300 mm Feed Rates Rapid traverse (X / Y / Z): 60 m/min Acceleration: 10 m/s² Feed force: 8.5 kN MACHINE DETAILS Control: Siemens Sinumerik 840 D pl Space Requirement & Weight Required space approx.: 8.5 x 5.5 x 3.0 m Machine weight approx.: 10,500 kg Total power requirement: 43 kVA Operating hours: 48,702 h EQUIPMENT - Documentation - High-pressure cooling - Coolant system - Internal coolant supply: 80 bar / 1,300 l - Electronic handwheel - Fully enclosed cabin - FASTEMS pallet pool / 15 positions - Chip conveyor - Paper band filter - Renishaw probe - Tool breakage monitoring Note: Transport lifting gear must be provided by the buyer. The pallet system cannot be observed under power. The Fastems controller is defective.

Condition: as good as new (ex-display), Year of construction: 2026, minimax c 26g TERSA – Multi-functional machine for sawing, milling, surfacing, and thickness planing. The worktables made of heavy-duty ribbed cast iron and the base frame made of welded steel guarantee torsional rigidity and vibration-free operation. Unique in this performance class: smooth-running, anodized aluminum format sliding table with ball-contact system. Swiveling saw blade from 90° to 45°. Table extension with aluminum stop for panels and large workpieces. Planer unit with TERSA quick-change system with three planer knives. Helically toothed steel infeed roller for consistent workpiece feed during thickness planing. Arc milling guard for profiling, standard with fine adjustment. Milling unit with two speeds. Three independent motors for each working unit. Quality – Made in Europe. Equipment details Aluminum sliding table With a tried-and-tested ball-contact system Dust and dirt-resistant due to minimal contact point between ball and trapezoidal rail Permanently smooth running Saw unit adjustment Manual height and bevel adjustment of the saw unit via star handle Accurate positioning using a scale TERSA planer knife shaft No more adjusting and screwing Planer knife changes in seconds Self-locking Particularly quiet Table milling machine The milling unit has two speeds for flexible tool use. The machine is equipped with a fine-adjustable arc milling guard for profiling. With the aluminum sliding table, mortise and tenon joints can be easily cut. Thickness planer With the powerful thickness feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. The surfacing table can be folded inward to save space. Changing from surfacing to thickness planing is done in seconds with a single movement. Surfacing planer Standard with TERSA planer knife quick-change system Large-sized surfacing tables The surfacing and thickness tables made of cast iron guarantee the highest smoothness and vibration-free operation. Pgjdpfsdqzh Tox Aicer Saw unit Saw can be swiveled up to 45° With saw blade 250 mm Ø with max. 80 mm cutting height A width of up to 500 mm can be cut on the parallel fence. Table extension With degree scale and aluminum stop for angled cuts on panels and large workpieces Scope of supply: Tersa quick-change planer knife shaft Anodized aluminum format sliding table Miter fence with a folding stop Multi-function fence for parallel cutting and surfacing Eccentric clamping arm Model: minimax c 26g TERSA Article no.: 5500027 Cutting length: 1200 mm Cutting width with parallel fence: 500 mm Max. crosscut width to the left of the saw blade: 1200 mm Saw blade inclination: 90 - 45 degrees Max. cutting height at 90°: 80 mm Format sliding table length: 1140 mm Format sliding table width: 201 mm Format sliding table height: 70 mm Saw table length: 1024 mm Saw table width: 224 mm Saw table height: 900 mm Planer knife shaft type: TERSA Planer knife shaft diameter: 62 mm Number of planer knives: 3 pcs Surfacing table width: 260 mm Surfacing table length: 1040 mm Swivel angle of saw/surfacing fence: 90/45 degrees Max. material removal during surfacing: 3 mm Thickness table length: 450 mm Thickness table width: 260 mm Min. workpiece thickness: 3 mm Location: In stock 54634 Bitburg - immediately available -

Condition: used, Cylindrical roller bearings, spherical roller bearings, deep groove ball bearings -FAG: 6218MA.C3 -Outer diameter: 160 mm -Inside diameter: 90 mm -Width: 30 mm -Price: per piece Pjdpfx Aisd S Ibbocogr -Number: 2 pieces -Weight: 2.7 kg

Year of construction: 2019, condition: ready for operation (used), travel distance X-axis: 256 mm, number of axes: 2, Cylindrical grinding machine manufactured in 2019. This TOS HOSTIVAR UB 25-1000 features a maximum swing diameter of 280 mm and a distance between centres of 1,000 mm. It includes a grinding head swivel range of ±45° and a rapid traverse speed of 2,000 mm/min. If you are looking to get high-quality grinding capabilities, consider the TOS HOSTIVAR UB 25-1000 machine we have for sale. Contact us for further details. Podpfx Aozwxmzjicjgr • Working capacity: • Maximum swing diameter: 280 mm • Distance between centres: 1,000 mm • Capacity with open steady rest: 70 mm • Capacity with closed steady rest: 70 mm • Minimum machinable diameter with a worn Ø250 mm grinding wheel: 0 mm (applicable at a workpiece swing diameter of 250 mm) • Workhead and tailstock: • Workhead swivel range: 90° • Workhead spindle taper: Morse 4 (ISO 296-91) • Tailstock quill taper: Morse 4 (ISO 296-91) • Tailstock quill stroke: 25 mm • Tailstock centre transverse adjustment (cylindricity correction): ±0.08 mm • Tailstock clamping force: 360 N • Grinding wheel head: • Swivel range: ±45° • Total adjustment range: 270 mm • Rapid traverse travel: 0–270 mm • Rapid traverse speed: 2,000 mm/min • Infeed per handwheel revolution (relative to diameter): 0.1 mm • Minimum manual infeed (relative to diameter): 0.001 mm • Automatic working infeed range (relative to diameter): 0.001–270 mm • Grinding wheel: • Standard dimensions: Ø400 × 40 × Ø127 mm • Maximum wheel width: 40 mm • Axes: • X-axis travel: 256 mm

Condition: excellent (used), Year of construction: 2014, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Opening stroke: 500 mm Distance between platten:(b x h) 570x570 mm Clear column spacing: 420x420 mm Ejector stroke: 175 mm Ejector force: 40 kN Hydraulic pump: 23,9 kW Screw: 35 mm, screw: L/D 20, 30 % glass Max wept volume 144 cm3 Pgedpfx Ajzilqkoicer Mth: 35047 pump L x W x H: 3700 x 1650 x 2600mm Weight 3650 kg Language: CZ, English, German Condition: machine is excellent condition working untill 30 CW 2024, now not under power

Condition: used, axle configuration: > 3 axles, first registration: 10/2008, total length: 15,570 mm, total width: 2,540 mm, suspension: hydraulics, tire size: 275/70 R 17.5, wheelbase: 13,320 mm, Year of construction: 2008, Equipment: ABS, = Additional Options and Accessories = Podeznkw Topfx Aicogr - Hydraulic suspension = Further Information = Axle configuration Tire size: 275/70 R 17.5 Axle brand: SAF Brakes: Drum brakes Suspension: hydraulic suspension Axle 1: Dual tires; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Axle 2: Dual tires; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80% Axle 3: Dual tires; Steerable; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Axle 4: Dual tires; Steerable; Tire tread depth left inner: 40%; Tire tread depth left outer: 40%; Tire tread depth right inner: 40%; Tire tread depth right outer: 40% Axle 5: Dual tires; Steerable; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80% Axle 6: Dual tires; Steerable; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80% Weights Unladen weight: 16,840 kg Payload: 67,160 kg GVW: 84,000 kg Functional Loading platform height: 165 cm Condition Damage: None Identification License plate: ZZ-84-02

Year of construction: 2020, condition: ready for operation (used), Wood production line manufactured in 2020. This HYMMEN JUPITER JPT C 680/548 mit OFS 850 features a maximum printing width of 548 mm, with a system speed ranging from 8 to 65 m/min. It is designed for high-speed surface finishing of large panels, ideal for the flooring and furniture industries. If you are looking to get high-quality printing capabilities, consider the HYMMEN JUPITER JPT C 680/548 mit OFS 850 machine we have for sale. Contact us for further details. • General system data: • Nominal width: 680 mm • Maximum printing width: 548 mm (expandable to 680 mm) • Maximum panel width in OFS: 510 mm • Working height: 900 mm (+50 mm) • Processing: printing and top coating from above, counter-coating from below • Operating mode: dual-lane up to max. 255 mm part width; otherwise single-lane • System speed: 8–65 m/min • Printing speed: up to 50 m/min • Jupiter digital printing unit (JPT): • Number of colors: 4 • Printheads per color: 8 (max. 10 possible) • Free slots for additional colors: 6 • Printhead type: XAAR 2001 • DLE structure printing unit: • Print rows: 1 • Printheads per row: 8 (max. 10 possible) • Free slots for additional rows: 1 • Total printheads: 8 • Printhead type: XAAR 1003 • Raw panel specifications: • Length: 600–2800 mm • Raw mother-board width before longitudinal ripping: 900–1260 mm • Panels are longitudinally divided prior to digital printing and coating operations • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Cutting format saw: • Longitudinal ripping system with up to 5 saw cuts plus 2 trimming units for production of finished plank widths from 160–510 mm • Finished panel specifications: • Length: 600–2800 mm • Width: 160–510 mm • Thickness: 2–12 mm (no restrictions); up to 28 mm with speed limitations • Feeding system (infeed): • Type: vacuum portal • Feeding stations: 2 • Discharge positions: 1 • Max feeding capacity: 8 cycles/min; with double stacking: 16 panels/min • Identical stacks per station: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm • Max stack weight: 5000 kg (combined) • Design: without pits • Transport mode: protective plate or pallet • Protective plate (infeed): length 800–2800 mm; width 1000–1260 mm; thickness 20–30 mm (up to 150 mm for pallets); max 80 kg per plate/pallet Pgjdpfxszugz Uj Aicer • Stacking system (outfeed): • Type: drop shaft • Stacking positions: 1 • Max stacking capacity: 30 cycles/min • Identical stacks per position: up to panel length 1550 mm = 2; ≥1550 mm = 1 • Max stack height: 1050 mm (alternative: 1000 mm) • Max stack weight: 5000 kg (combined) / Alternative stacking configuration maximum stack weight: 3500 kg • Design: with pits • Transport mode: protective plate or pallet • Protective plate feeding method: loading by forklift, separation by robot • Protective plate (stacking): length 800–2800 mm; width 1000–1200 mm; thickness 20–30 mm; max 80 kg per plate; material OSB or HDF • Process aggregates: • Number of aggregates: 35 • Process steps: feeding, cutting, cleaning, infrared heating, UV curing, coating, digital printing, structuring, excimer matting, stacking • Application: • Industrial single-pass digital printing line for high-speed surface finishing of large panels (flooring and furniture), producing realistic wood, stone, or custom decors directly on substrates Additional equipment • Robot for protective plate separation at outfeed (as part of protective plate handling)

Condition: used, Ball bearings, deep groove ball bearings -Number: 80x stock available -Price: per piece -Interior diameter: Ø 10 mm -Outer diameter: Ø 28 mm -Width: 8 mm Pjdpjb A S Dkefx Aicegr -Weight: 0.2 kg/piece

Condition: new, machine/vehicle number: 10463, The AR series are slow-running machines. They are available with 2, 4, 6, or 8 screw shafts. Each screw unit is installed independently and separately in the chassis. Pgedpfoyr Ti Iox Aicor Screw shredders are designed for the shredding of brittle materials (wood, paper, gypsum, mineral wool, etc.). The machines are largely insensitive to contaminants such as glass, metal parts, stones, etc. The AR series is optimally suited for use as a bale opener, e.g., for PET bottle bales.

Condition: used, Year of construction: 2003, CNC machining center, universal Manufacturer: AXA Type: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel distances: X/Y/Z = 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60 positions Spindle speed: 10,000 rpm Podpowwt Nmjfx Aicegr Weight: approx. 20 tons 3826ä

Condition: good (used), Year of construction: 2018, functionality: fully functional, total width: 3,642 mm, total length: 3,334 mm, input voltage: 400 V, feed length X-axis: 2,900 mm, feed length Y-axis: 2,600 mm, working width: 2,600 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, cutting width (max.): 2,540 mm, cutting height (max.): 20 mm, compressed air connection: 9 bar, We are selling our Atom FlashCut Fashion 26B All-in-One fully automatic cutting table system. With a usable working area of 2,900 x 2,600 mm, a cutting window of 2,540 x 850 mm, and a separate unloading area of 1,200 x 2,600 mm, the FlashCut 26B offers ideal conditions for efficient workflows. The maximum cutting height of 20 mm allows for processing a wide range of materials – including multilayer applications. Two independently operating tool heads ensure high speed and maximum productivity. Servo drives on the X, Y, and Z axes guarantee precise movements with a travel speed of up to 80 m/min and an acceleration of 1G. Intelligent Material Handling & Vacuum Technology A continuous conveyor belt feeds the material into the processing zone. The vacuum table is divided into 300 x 300 mm segments, allowing targeted activation of individual areas. This ensures precise material fixing while minimizing energy consumption. Pgsdjymn R Nopfx Aicsr Two high-performance vacuum pumps with frequency control (3–15 kW) automatically adjust their output to actual requirements. The result: secure material fixing with energy-efficient operation. Precision through Camera and Projection Technology For maximum material utilization, the system is equipped with two cameras with integrated light sources and dimmers for detecting irregular material contours – for example, when processing leather hides. Flaws can be digitally marked and taken into account during further processing. Two high-performance projectors support automatic nesting by projecting cutting contours directly onto the material. In addition, item numbers, sizes, or other markings can be projected onto the cut parts – ideal for process reliability and traceability. Powerful CNC Control & Software The system features a modern CNC control unit, including TFT color display, keyboard, and USB interface. An integrated computer with Windows Embedded, Ethernet connectivity, and TeamViewer support enables easy operation and remote maintenance. The software package includes: - DXF converter for reading and converting CAD files - Interactive layout software - Automatic nesting software - CAD module for creating simple geometries Optionally, the Luxury Nest Strategy adds a specially developed nesting logic for optimizing leather cutting. It takes into account quality zones, defect areas, and defined rotation and grouping rules to ensure maximum material yield. Versatile Tool Equipment The FlashCut 26B comes with a multi-tool head. Standard tools include: - Drag knife - Punch tools (various diameters) - Marking tool - Tracing needle - Laser pointer - Knife holder and ejector This makes the system flexible for cutting, marking, and perforating tasks. Safety & Reliability A safety system with light barriers and emergency stop button ensures maximum operational safety. The machine is CE-compliant and designed for continuous industrial operation.