Used Boehringer Vdf 315 Cm for sale (14,225)

Condition: used, Year of construction: 1975, turning diameter over bed 820 mm turning diameter over slide rest 575 mm turning length 3300 mm centre height 410 mm spindle bore 125 mm Rodpfx Asyfwyksfnjt spindle turning speed range 7,1 - 1400 U/min total power requirement 22,0 kW weight of the machine ca. 6,0 t dimensions of the machine ca. 6,3 x 1,6 x 2,0 mm Lathes with: - Digital readout - Rapid traverse - Röhm 3-jaw chuck 315mm - 4-position tool post - 2 steady rests - Coolant system - Emergency stop device - Machine light - Chuck guard - 2 chip trays - Spare jaws (internal and external)

Year of construction: 1960, condition: ready for operation (used), Turning length: 4000mm, turning diameter over bed: 680mm, turning diameter over short cross slide: 480mm, turning diameter over long cross slide: 420mm, turning diameter in the gap: 880mm, swing diameter in the gap: 960mm, travel cross slide: 480mm, top slide: 230mm, tailstock quill: 280mm, center height over flat bed: 335mm, center height over prism top edge: 313mm, bed width: 560mm, diameter of tailstock quill: 125mm, Morse taper of center: no. 6. With upper support, steady rests, operating manual, digital readout and measuring system, Multifix tool holder. Machine is currently partially overhauled. An on-site inspection is possible. Rjdpfx Afsylbtbsnet

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft Rjdpew Dufijfx Afnot *

Condition: used, Year of construction: 1987, turning diameter over bed 0560 mm turning diameter over slide rest 325 mm turning length 1500 mm Rjdpfx Ajw Ny S Dsfnst spindle bore 62 mm spindle turning speed range 11,2 - 2240 U/min total power requirement 9 kW weight of the machine ca. 4 t dimensions of the machine ca. 4 x 1,6 x 1,6 m With Multifix incl. 2 holders, chuck, rotating center and DRO.

Year of construction: 2007, condition: ready for operation (used), Traverse paths facing slide/top slide/tailstock quill: 345mm/125mm/190mm, longitudinal/face feed per revolution: 56mm/28mm, speed: 2240rpm, max. workpiece weight: without setting block: 500kg, 1 setting block: 630kg, 2 setting blocks: 800kg. Circumferential diameter over bed/plane slide/bed spreading: 570mm/365mm/600mm. The automatic plan feed is defective. Documentation available. Rodpfxer Nd Eks Afnot

Year of construction: 1992, condition: ready for operation (used), Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025. Rodpfx Aju D H Hwjfnot

Year of construction: 1993, condition: ready for operation (used), Center height: 280mm, distance between centers: 2000mm, turning diameter over bed/cross slide: 570mm/365mm, spindle bore: 62mm, speed: 2500rpm, max. workpiece weight: 1000kg, bed width: 360mm. Machine dimensions X/Y/Z: approx. 4000mm/2250mm/2000mm, weight: approx. 5500kg, control: Siemens. An on-site inspection is possible. Rjdpfjxq Eyuox Afnjt

Condition: used, Year of construction: 1998, Technical details: turning diameter over bed: 600 mm turning diameter over support: 400 mm turning length: 2000 mm center height over support: 300 mm centre distance: 1600 mm revolution per minute: 3 - 2.500 U/min tailstock taper MT: MK 5 spindle bore of work spindle: 62 mm quill stroke: 190 mm Rodpfx Afew Rkt Ienet longitudinal feeds:: ca.0,001-10 einstellbar mm/U cross feed: ca. 0,001-5 einstellbar mm/U Rapid feed X axis: bis zu 5000 m/min. total power requirement: 40 KVA weight of the machine ca.: 5,6 t dimension machine xH: 4,0 x 2,0 x 1,9 m incl. accessories see picture *

Condition: used, Year of construction: 2000, turning diameter 600 mm turning length 850 mm swing diameter over bed slide 290 mm Control Siemens 840D Turning length: 850 mm Rotation diameter over table: 600 mm x-axis: 220 mm z-axis: 950 mm Control: Siemens 840D Speeds: 0-4500 rpm Tool revolver: 2 pieces Spindle bore: 65 mm Rotation diameter: 290 mm Feed rate x/y: 25 m/min Rodpfx Aeydfpdsfnet Rapid traverse x/z: 25 m/min Working height: 1200 mm

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Rjdpov A Sqhjfx Afnst Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2022.3781-03, turning diameter over cross slide: 365 mm, turning length: 4,000 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens Sinumerik 810 D, TECHNICAL DETAILS Turning length: 4000 mm Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section: max. 20 x 20 mm Faceplate diameter: 560 mm Chuck diameter: 250 - 315 mm according to VDF 6025 Control: SINUMERIK 810 D with screen Workpiece weight with tailstock: max. 1000 kg Workpiece weight with tailstock and 2 steady rests: max. 1600 kg Main spindle Spindle head according to DIN 55 027: Size 8 Spindle diameter in the front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Main Drive Motor type: Continuously variable three-phase AC motor Drive power (60% / 100% duty cycle): 25/20 kW Maximum torque (60% / 100% duty cycle): 1,800/1,400 Nm Total speed range: 3 - 2,500 rpm (2-stage) Constant cutting speed: 1 - 9,999 m/min Feed drives Redpfx Afev R Hamonet Drive type: Three-phase servo drives (AC motor) Transverse and longitudinal feed range: 0.01-50 mm/rev Max. feed rate (rapid traverse): 5 m/min Conventional rapid traverse, transverse: 2.5 m/min Max. longitudinal feed rate (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Transverse feed force: 7,100 N Longitudinal feed force: 12,500 N Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Quill inner taper: MT 5 Tip angle, standard: 60° Thread pitch: 0.1 - 2,000 mm MACHINE DETAILS Floor space required: 6.83 x 2.16 m Machine height: 1.98 m Weight: 7,200 kg Total power consumption: 35 kVA EQUIPMENT - Sauter 8-station disc turret - Fixed steady rest - 8 cylindrical shank adapters - Coolant pump - Lubrication pump - Machine stand - Transport base - Main spindle brake - Operating instructions and circuit diagrams

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1325.0458-14, controller manufacturer: Siemens, input frequency: 50 Hz, input current: 190 A, TECHNICAL DETAILS Electrical Operating voltage: 400 V Phases: 3 AC Frequency: 50 Hz Fusing: 250 A Rated current: 190 A Rodpfjwx Hktex Afnot EQUIPMENT Lathe with 4 tools, suitable only for 3-cylinder crankshaft

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: MK 15982, center width: 700 mm, overall weight: 18,000 kg, TECHNICAL DETAILS General Data Distance between centers: 700 mm Maximum swing diameter: 200 mm Specification Lathe with tools: 4 Suitable for: 3-cylinder crankshaft Rsdswx E Tmspfx Afnet MACHINE DETAILS Machine weight: approx. 18 t EQUIPMENT Lathe with 4 tools only for 3-cylinder crankshaft

Condition: good (used), Year of construction: 1972, functionality: fully functional, machine/vehicle number: 70.1025.002302, turning diameter over cross slide: 280 mm, spindle bore: 52 mm, turning diameter: 485 mm, center height: 232 mm, center width: 360 mm, turning length: 1,600 mm, total length: 3,350 mm, total width: 1,100 mm, total height: 1,400 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 11 rpm, overall weight: 2,500 kg, workpiece weight (max.): 500 kg, Offered for sale is a VDF 48S Boehringer lead and feed screw lathe with accessories in good condition. Manufacturer: VDF Boehringer Göppingen Redpsx Nqklefx Afnjt Model: 48S Machine no.: 70.1025.002302 Year of manufacture: approx. 1972 Centre height: 232 mm Centre distance: 1600 mm Swing over bed: 485 mm Swing over cross slide: 280 mm Spindle bore: 52 mm Spindle speeds: 11.2 - 2240 rpm Total power requirement: 7.5 kW Machine dimensions (L x W x H): approx. 3.35 x 1.10 x 1.40 m Weight: approx. 2,500 kg

Condition: used, Year of construction: 1976, functionality: unexamined, total length: 4,100 mm, total width: 1,900 mm, total height: 1,900 mm, bed width: 550 mm, rotational speed (max.): 1,800 rpm, For sale is a Boehringer DM550 centre lathe with leadscrew/feed shaft from 1976 (18.5 kW). The DM 550 features a swing diameter of approx. 550 mm (over bed) and offers high rigidity for heavy-duty and precise turning operations. The machine is in age-appropriate condition, has not been tested, and is being sold as-is. Our Service Promise: We prioritize quality, expertise, and customer satisfaction. Our team consists of qualified and experienced technicians specialized in Mazak machines as well as other machinery. We place great emphasis on personal support and are happy to assist you anytime, even after purchase. With us, you are in the best hands – professional, reliable, and passionate about machines! Redpfxexyxu Ds Afnjt PS CNC Service Germany GmbH & Co. KG All information subject to change without notice.

Condition: used, Year of construction: 2007, functionality: fully functional, turning diameter over cross slide: 435 mm, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 640 mm, center width: 1,500 mm, turning diameter over bed slide: 640 mm, swing diameter over cross slide: 435 mm, quill stroke: 190 mm, quill diameter: 100 mm, quill travel distance: 190 mm, center height: 320 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 5 m/min, swing diameter over bed slide: 640 mm, spindle speed (min.): 3 rpm, spindle speed (max.): 2,500 rpm, feed length X-axis: 365 mm, feed length Z-axis: 1,500 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 10 m/min, bed width: 1,800 mm, workpiece weight (max.): 1,600 kg, type of input current: AC, travel distance cross slide: 365 mm, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, three-jaw chuck diameter: 315 mm, torque: 640 Nm, travel distance X-axis: 365 mm, travel distance Z-axis: 1,500 mm, workpiece weight between centers: 1,600 g, spindle diameter: 100 mm, workpiece diameter between centers: 640 mm, distance between centers: 1,500 mm, workpiece length between centers: 1,500 mm, chuck outer diameter: 315 mm, Equipment: rotational speed infinitely variable, Model: VDF Boehringer DUS 630 Swing diameter over bed: 640 mm Swing diameter over cross slide: 435 mm Travel of cross slide / top slide: 365 mm / 145 mm Center height over flat bed: 320 mm Distance between centers: 1,500 mm Cross slide dimensions (W x L): 265 x 630 mm Top slide dimensions (W x L): 220 x 425 mm Turning tool section: 32 x 25 mm Spindle bore: 70 mm Front spindle diameter: 100 mm Max. torque (40% / 100% duty cycle): 1,600 / 640 Nm Speed range (overall): 3–2,500 rpm Gear stages: 2 Constant cutting speed: 1–9,999 m/min Feed range transverse/longitudinal: 0.01–50 mm/rev Max. feed rate transverse/longitudinal: 10 m/min Rapid traverse transverse/longitudinal: 5 m/min Feed force transverse/longitudinal: 12,500 N Metric thread pitches: 0.1–400 mm Quill diameter / stroke / taper: 100 mm / 190 mm / MT5 Faceplate: Ø 630 mm Setover tailstock center: Ø 150 mm Rodpfswywxdjx Afnet Workpiece weight (max.): Between centers: 400 kg With tailstock & 2 steadies: 1,600 kg Display: 10.4" color LCD, showing (among others) spindle speed, feed rate, position, tool, load

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Type: T 11 Year of construction: 1970 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Rodpfexmd Uvjx Afnet Swing diameter over cross slide: Ø 450 mm

Condition: ready for operation (used), Swing over bed 570mm Distance between centers 1800mm Turning length 1500mm Center height 280mm Swing over slide 365mm Spindle bore 62mm Spindle speeds 11,2-2240 rpm Redpfofmd Dhsx Afnot MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2002.1023-01, turning diameter: 420 mm, center width: 1,200 mm, center height: 210 mm, spindle speed (max.): 3,000 rpm, controller model: Siemens Sinumerik 840, Extensive accessory package included! TECHNICAL DETAILS Turning diameter: 420 mm Center distance: 1,200 mm Spindle bore: 51 mm Speed: max. 3,000 rpm Center height: 210 mm Control: Siemens Sinumerik 840 MACHINE DETAILS Dimensions (L x W x H): 2,700 x 1,300 x 1,800 mm Weight: approx. 3,500 kg Power supply: 400 V - 3 AV - 50 Hz EQUIPMENT - Steady rest - Collet chuck 173E (Ortlieb) - Parat base holder - 14 Parat tool holders (WD2/25) - Machine feet - Schunk Rota-G D200 key bar chuck - Live center Rodewa Rnfspfx Afnjt - Machine documentation (operating manual / programming manual / Electrical circuit diagram / data backup on CD)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, TECHNICAL DETAILS: Manufacturer: MAG IAS GmbH (Boehringer) – Germany Model: DUS 400 ti Year of manufacture: 2010 Redsyxp I Uspfx Afnet Control system: Heidenhain Operation voltage: 400V / 50Hz Control voltage: 24V Short circuit rating: 50 kA Main motor current: 23.5 A Total nominal current: 33 A Main supply fuse: 50 A Made in Germany

Condition: ready for operation (used), turning diameter over cross slide: 800 mm, turning diameter: 800 mm, turning diameter over bed slide: 560 mm, Center Lathe VDF V6 Distance between centers: 5000 mm Rodpoxpillofx Afnet Turning diameter: Over guides: 800 mm Over carriage: 560 mm Spindle speed: 560 rpm Motor power: 11 kW Accessories: Steady rests: 330 mm and 420 mm

Condition: not inspected (used), Year of construction: 1977, functionality: unexamined, machine/vehicle number: 192.6155-06, spindle bore: 62 mm, turning diameter over bed slide: 270 mm, center width: 1,150 mm, turning length: 1,000 mm, spindle speed (max.): 2,240 rpm, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to a business closure. Placing a bid obligates the buyer to collect the item within the specified pickup window: January 26, 2026 to January 29, 2026. TECHNICAL DETAILS Swing diameter over bed (max.): 485 mm Turning length (max.): 1,000 mm Swing diameter over cross slide (max.): 270 mm Distance between centers (max.): 1,150 mm Spindle bore diameter: 62 mm Internal taper, metric (max.): 70 mm Maximum tool shank size (W x H): 25 x 25 mm Leadscrew: 6 mm Tailstock quill taper: Morse 5 Manual quill travel (max.): 119 mm Cross-slide travel from center position (max.): 110 mm Spindle speed range: 11.2 – 2,240 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,000 x 1,600 mm Weight: 1,500 kg EQUIPMENT Tailstock Multifix quick-change tool holder 3-jaw chuck, diameter: 250 mm, Manufacturer: FORKARDT Multifix tool holder, type: BD 25140 Multifix tool holder, type: BD 25120 Turning tools Steady rest (diameter approx. 150 mm) Redpfx Afexqg Akenot 4-jaw face plate, diameter: 450 mm

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, turning diameter over cross slide: 710 mm, turning length: 2,000 mm, turning diameter: 1,000 mm, spindle bore: 128 mm, rapid traverse X-axis: 5 m/min, rapid traverse Z-axis: 2 m/min, rotational speed (min.): 6 rpm, rotational speed (max.): 1,600 rpm, total height: 2,250 mm, total length: 5,800 mm, total width: 2,005 mm, quill travel distance: 280 mm, quill diameter: 125 mm, swing diameter over cross slide: 710 mm, torque: 4,260 Nm, overall weight: 10,100 kg, Equipment: documentation/manual, - Swing diameter over bed: 1000 mm - Swing diameter over cross slide: 710 mm - Feed rate in X, Z axes: 0.01–50 mm/rev - Feed speed in X/Z axes: 5/2.5 m/min - Rapid traverse in X/Z axes: 10/5 m/min - Feed force in X/Z axes: 20,000/12,500 N - Constant cutting speed: 1–9999 m/min - Distance between centers: 3300 mm - Faceplate diameter: 900 mm - 3-jaw chuck diameter: 500 mm - Bed width: 560 mm - Cross slide travel: 540 mm - Top slide travel: 250 mm - Metric thread pitch: 0.1–400 mm - Spindle nose: KK 11 DIN 55027 - Number of motor gear stages: 2 - Spindle speed range (first gear): 6.3–360 rpm - Spindle speed range (second gear): 28–1600 rpm - Spindle bearing diameter (front): 170 mm - Spindle bore diameter: 128 mm - Spindle internal taper: 136 metric - Tailstock quill diameter: 125 mm - Tailstock quill stroke: 280 mm - Tailstock quill internal taper: Morse 6 (MK6) - Cross slide dimensions (L x W): 1005 x 320 mm Rodoya Dz Dopfx Afnjt - Top slide width: 200 mm - Tool cross-section per DIN 770: 40 x 25 mm - Main drive power (60%/100% duty): 46/37 kW - Main drive torque (60%/100% duty): 5300/4260 Nm - Total power requirement: 60 kVA - Power supply: 400 V - Control cabinet dimensions (L x W x H): 1800 x 500 x 1600 mm - Machine dimensions (L x W x H): 5800 x 2005 x 2250 mm - Machine weight: approx. 10,100 kg CNC controller: SIEMENS SINUMERIK - Toolholder: MULTIFIX type D - AC servo drives - Reliable stepless AC main drive - Work area lighting

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump upgraded to higher pressure/flow rate in 2021 • Draw tube replaced and spindle head newly mounted and ground in 2022 • Prepared for automatic loading of parts via robot cell Control: CNC control including Siemens 840 D color screen TECHNICAL DATA Maximum swing diameter: 550 mm Maximum turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single stage): 30 – 4000 rpm Redpfx Ajwwkx Esfnst Drum turret Number of stations: 12, of which powered: 6 Tool shank diameter: 40 mm Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT / ACCESSORIES  Full enclosure including work area lighting  Automatic power-operated sliding door  C-axis  Tailstock programmable drag function including various center points  12-position drum turret  Turret drive unit  Chip conveyor  Coolant system with reinforced pump, approx. 4 bar  Interface for automation  Various accessories  1 pc. Heimbuch collet chuck SK 80, without collets  1 pc. Schunk Rota NCF 315 three-jaw chuck  1 pc. Schunk Rota NCF 250 three-jaw chuck  1 pc. Schunk Rota NCF 250 two-jaw chuck  1 pc. WTO broaching head  2 pcs. driven tools CAPTO axial tool  2 pcs. driven tools CAPTO axial radial tool  3 pcs. driven tools CAPTO radial tool  7 pcs. static tool holders  Installation elements  Documentation

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning length: 1,000 mm, turning diameter: 480 mm, • Turret overhauled in 2021 • Coolant pump with increased pressure/delivery rate in 2021 • Draw tube replaced and headstock newly mounted and ground in 2022 • Prepared for automatic part loading via robot cell Control: CNC control including color display Siemens 840 D TECHNICAL DATA Max. swing diameter: 550 mm Max. turning diameter: 480 mm Turning length: 1000 mm Spindle bore: 78 mm Drive power (50%): 53 kW Speed range (single-stage): 30 – 4000 rpm Drum turret Number of stations: 12, of which 6 are driven Tool shank socket: 40 mm Rjdpfevr Tkzjx Afnot Speed range (two-stage): 20 – 2500 rpm Tailstock (hydraulic quill adjustment) EQUIPMENT/ACCESSORIES - Full enclosure including work area lighting - Automatically operated sliding door - C-axis - Tailstock programmable drag, incl. various centers - 12-position drum turret - Turret drive units - Chip conveyor - Coolant system with reinforced pump, approx. 4 bar - Automation interface - Various accessories - 1 piece Heimbuch Spanntop SK 80, without collets - 1 piece Schunk Rota NCF 315 three-jaw chuck - 1 piece Schunk Rota NCF 250 three-jaw chuck - 1 piece Schunk Rota NCF 250 two-jaw chuck - 1 piece WTO broaching unit - 2 pieces driven tools CAPTO-axial tool - 2 pieces driven tools CAPTO-axial radial tool - 3 pieces driven tools CAPTO-radial tool - 7 pieces fixed tool holders - Mounting elements - Documentation