Used Aerzen Gm 25 S for sale (75,870)

Condition: used, machine/vehicle number: 16737, operating hours: 2,683 h, load capacity: 2,500 kg, lifting height: 200 mm, fuel type: electric, mast type: other, construction height: 1,400 mm, battery voltage: 24 V, fork length: 1,150 mm, enginetype: Electric, manufacturer: Still Lsdpfxex Ntx Sj Akwjah Serial Number: W42365Y00558 Battery Details: 24 Volt

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg Ljdpfxevr Hgvs Akwoah weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: as good as new (ex-display), Diaphragm pump, FLUX air-operated diaphragm pump – 8 bar,Membrane pump, New condition (without warranty) Laodpozrm Aasfx Akwsh Manufacturer: FLUX - GERÄTE GMBH (Made in Germany) Type: FDM 25 S/TT Serial number / Part number: 15663 Max. flow rate: 150 – 175 l/min Max. operating pressure (PN max): 8 bar Housing material: Stainless steel (S) Diaphragm / Seal material: PTFE / Teflon (TT) Connection size: 1" (DN 25)

Condition: good (used), Year of construction: 1994, Pressure: 250 t Ledpfj Aawrfsx Akwsah Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Injection pressure: 2144 bar, Clamping force: 2500 kN, Maximum shot weight: 694 grams, Installed heating capacity: 22.7 kW, Lasdpfxszub Hrj Akwjh Hour meter: 5100 hours, Machine weight: 18,000 kg.

Condition: new, We manufacture pointing machines AVS25, AVS40, AVS63 & AVS100 completely new. The AVS Four-Hammer pointing machine series delivers reliable, precise preforming for pipes and bars, readying them for drawing. Both warm and cold forming, AVS machines ensure symmetrical results, minimal waste, and excellent surface finish. This robust design guarantees stable, efficient operation for all your metal pointing requirements. New pointing machine: AVS25 Valid for: Hot and cold pointing Laedpjymadusfx Akweh Feeding: Automatic and manual Forming capacity: 4 x 25 Mp Number of strokes: 800/min Diameter for round point: 10 - 75 mm Diameter for folded point: 18 - 100 mm Diameter of reduced section for both point types: Max. 50 mm Feed speed, infinitely variable: 0 - 70 mm/sec

Condition: good (used), Year of construction: 2011, operating hours: 59,000 h, functionality: fully functional, clamping force: 250 kN, screw diameter: 30 mm, clearance between the columns: 270 mm, injection pressure: 2,000 bar, total length: 3,180 mm, total width: 1,430 mm, total height: 1,850 mm, overall weight: 2,110 kg, warehouse no.: 503725 manufacturer: ARBURG type: Allrounder 270 S 250-170 controller: SELOGICA year of construction: 2011 operation hours: 59000 h technical data clamping unit clamping force: 250 kN distance between tie-bars h x v: 270 x 270 mm size of mould plates h x v: 380 x 380 mm min. mould height: 200 mm max. open daylight: 550 mm opening stroke: 350 mm ejector stroke: 100 mm ejector force: 20 kN centering diameter of moving platen: 110 mm centering diameter of fixed platen: 110 mm technical data injection unit screw diameter: 30 mm swept volume: 85 ccm injection pressure: 2000 bar screw length: 20 l/d screw torque: 250 N injection rate into the open: 96 g/s PS number of heating zones: 4 Laedpfx Akez Eax Eswoh nozzle stroke: 300 mm measures & weight measures of machine l x w x h: 3.18m x 1.43m x 1.85m total weight: 2110KG equipment included incl. Spruepicker screen text german screen text german core pulling hydraulically 1x Anti vibration mounts

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 2,500 kg, fork length: 1,200 mm, empty load weight: 340 kg, opening width: 1,110 mm, Fork adjustment device Lajdpfx Akez Idtlswsh Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: very good Description: Good, ready-to-use condition, as returned by the previous owner // good working condition, as back from the pre-owner Opening range (center-to-center): 410 mm - 1110 mm

Condition: good (used), Year of construction: 2002, functionality: fully functional, filter area: 48 m², filter pressure: 15 bar, pressure: 380 bar, cake thickness: 25 mm, total width: 1,500 mm, total length: 4,800 mm, total height: 1,980 mm, overall weight: 4,600 kg, number of chambers: 44, Equipment: documentation/manual, safety light barrier, For sale is a chamber filter press with the following accessories: Hydraulics, filter plates, safety devices, control system, swing plates, feed pump, press frame (steel platform), 3 cake containers for forklifts. Chamber filter press 800 Side-frame press 15 bar filtration pressure Approx. 540 liters Open filtrate discharge 800x800 PP 25mm chamber depth 44 chambers Approx. 2.5 meters useful length Laedszulf Sspfx Akwjh Length 4800 x Width 1500 x Height 1980 mm 4600 kg Price upon request. We would be happy to provide you with an individual offer.

Condition: good (used), Year of construction: 1963, 3 different eccentric presses, manuf. WMW Lajdpfx Akomi Rpiswsh 1 x crank press with one ram 16 t 1 x crank press with one ram 25 t

Condition: ready for operation (used), Year of construction: 2008, operating hours: 51,226 h, functionality: fully functional, turning length: 1,175 mm, spindle speed (max.): 5,000 rpm, controller model: HEIDENHAIN Plus iT, number of slots in tool magazine: 36, TECHNICAL DETAILS Ledpfozqfvvex Akwsah Maximum spindle speed: 5,000 rpm Turning length: 1,175 mm Turning length with tailstock: 1,100 mm Tool holder: HSK 63A according to DIN 69893 Number of tool magazine positions (disc magazine): 36 MACHINE DETAILS Control system: HEIDENHAIN Plus iT with Turn Plus

Condition: new, functionality: fully functional, Charger Laedpfeywpmbox Akweh Condition: New device Technical condition: New Description: High-frequency charger available in the following capacities: 24V 30A, 24V 25A, 24V 20A, 24V 15A, 24V 10A. If you have any further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to assist with leasing & financing solutions as well as delivery at favorable terms. Trade-in of Linde equipment is also possible—even if you don’t purchase a device from us. The operating hours indicated were read off at the time of listing. Subject to prior sale, changes, and errors.

Condition: used, functionality: fully functional, Year of construction: 2019, load capacity: 2,500 kg, Double pallet fork Load center: 600 ISO class: ISO class 3 = 2,500 – 4,999 kg Condition: Ready for operation and fully functional Laodpfoyi I Tvjx Akwjh Technical condition: good Description: Year 2019 ISO 3A (51 cm) Capacity 2,500 kg Sideshift Opening range 560–1,960 mm Width 1,250 mm Forks 1,150 mm ID OS1859

Condition: used, Year of construction: 2018, overall weight: 600 kg, load capacity: 10 kg, terms of delivery: FCA Pegnitz delivery time: on request Lsdpfx Aksz Hfl Howjah terms of payment: 100% prior to delivery

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable Ljdpfsz Sdy Asx Akwsah

Condition: used, Year of construction: 1989, pressure 25 t throat 190 mm stroke 8 - 80 mm no. of strokes 120 Hub/min Lasdpfx Aksz Rqnpowoh ram adjustment 45 mm table surface area 550 x 370 mm hole in the table 200 x 155 mm table height over floor 660 mm ram surface 280 x 160 mm total power requirement 1,5 kW weight of the machine ca. 1,9 t - Ortlinghaus hydraulically operated clutch with dual brake - fixed table Machine is partially overhauled in-house

Condition: used, functionality: fully functional, Year of construction: 1978, machine/vehicle number: ROD43, 1 Demag KBK II wall-mounted jib crane, 250 kg payload / lifting capacity Jib length 5 m, 125 kg payload Fitted with Abus GM chain hoist, 125 kg capacity – Year 2023! Weight incl. wall bracket (recent date) approx. 350 kg Ljdpfoxmuugox Akwoah Complete with chain hoist, cable trolley, travel gear, and small parts Slewing range 270° Item location: 75053 Gondelsheim The unit is fully dismantled and immediately available Shipping by freight carrier or local pickup Please inquire for shipping costs by postal code

Condition: good (used), Year of construction: 1987, machine/vehicle number: 287, Offer 26239 Technical data: - Pressing force: 250 kN - Max. sheet thickness: 10 mm - Max. punch size / punching diameter: 105 mm - Stroke, continuously adjustable: 0 - 40 mm - Overhang: 750 mm - Highest stroke rate: 150 strokes/min - Installation height: 200 mm - Drive: 400 V / 8.2 kVA Lodpfez R Siiex Akwjah - Space requirement: approx. W 4200 x H 1700 x D 1700 mm - Weight: approx. 3200 kg - Including: - Stop table, left and right, each with X-axis travel of 2000 mm - Y-axis travel: 500 mm - Quick-change tool system for punches - Foot pedal; emergency stop button - Extensive range of accessories, various tool holders - Punches and dies

Condition: ready for operation (used), * Brand: Metso * Type: FS 403 , for dry screening * Surface: 6000 x 2500 mm - 3 decks. * Incl.: 55 kW E-motor and outlet trough. Lajdpfx Ajzd Uz Iskwoh * On stock: 1 piece.

Condition: used, functionality: fully functional, input voltage: 230 V, Hello, we are offering a used paint shaker/agitator from the German manufacturer Collomix, model VIBA 25. Laodpezmcqiofx Akwjh The device is in good condition and fully functional. It is suitable for containers up to 25 kg. The paint is brought into vibration by a shaking motion, which causes it to mix itself perfectly. We have used this system to mix screen printing inks. However, the system can also be used for a wide variety of paints and coatings. The pre-set time of 1, 2 or 3 minutes can be selected using the selector buttons. The system is currently located in our warehouse in 93476 Blaibach, Bavaria. If you have any questions, please feel free to write to us.

Year of construction: 2009, operating hours: 500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Base carrier: Sennebogen BS 80 R Under carriage: BAUER UW 95 R Engine: CAT C 18 with 570 kW (no AdBlue nocessary) Available applications: Kelly rotary head KDK 235 S / double head rotary DKS 100/ 200 -02 / Vibrator MR 125 V This machine got only 500 running hours and is like NEW !!! Lsdpfoh Tyyhox Akweah

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm Lajdpfsd Sg Hrox Akwoh 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Ljdpsu Dw I Eofx Akwjah Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, The BS-25 concrete block making machine is an excellent solution for plants producing concrete blocks, bricks, paving stones, and bims, offering high efficiency and flexible production capabilities. Developed in line with modern production concepts, this machine can easily produce various products such as paving stones, curb stones, and hollow blocks using different molds thanks to its single-layer structure. Thanks to its scalable facility structure, investors can quickly and economically increase their production capacity according to their needs. The BS-25's fully automatic PLC control system allows a single operator to manage the entire production process. The touchscreen LCD control panel offers the ability to monitor and print production data in real time with its user-friendly interface and advanced reporting system. With its remote access feature, the system can be controlled via LAN or internet connection, allowing for easy detection of potential malfunctions and remote software updates. This smart automation technology ensures consistent quality and maximum production in every shift. BS-25 - Concrete Block Machine Technical Specifications Production Capacity: 110–120 pallets/hour Pallet Size: 1,200 x 980 x 230 mm Control: PLC Automation System (Schneider) Bunker Capacity: 1.5 m³ Hydraulic Oil Capacity: 500 liters Upper Vibration: 3 kW x 2 Lower Vibration: 4 kW x 4 Total Electrical Requirement: 150 kW Total Vibration Power: 30,000 Production Capacity in 8 Hours: 10,000 concrete blocks / 25,000 interlock blocks Why Should You Choose the BS-25 Concrete Block Machine? Ledpfexp Uurjx Akweah CONSTMACH stands out in the production of concrete block, brick, and paving stone making machines with its reliability, engineering quality, and after-sales support. The BS-25 model reduces your production costs while increasing your capacity with its energy-efficient design, long-lasting components, and smart control system. Each machine is delivered after passing quality control tests and can be customized upon request. For investors seeking high durability, minimal maintenance requirements, and world-class production performance, the BS-25 is a symbol of long-term profitability and reliability. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: excellent (used), Kaeser Omega 83 P blower stage, fully refurbished, 12-month warranty, HB 1300 Lodpfsncd Apox Akwoah