Used Welding Machine With Cleaning Line for sale (71,216)

Condition: good (used), Year of construction: 2014, Manufacturer: MIBA Type: LNF65 Control: SIEMENS 840D Year: 2014 Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (estimated) Length 0 mm Width 0 mm Height 0 mm Lrjdpfx Aswq Hqkemnel Weight 0 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend that you verify all important details.

Condition: used, Welding transformer, high-current transformer, transformer for spot welding machines, resistance welding machines, roll seam welding machines ELREX Type 3x ET70.0.G Mfg. No. Year of manufacture approx. 1990 Consisting of three water-cooled transformers with a water-cooled rectifier block Performance data: Total power at 50% duty cycle 210 kVA (total power from 3 transformers) Secondary voltage 7 - 10.5 volts (adjustable in 4 steps via connection terminals on the transformer) Secondary current at 50% duty cycle 20.1 kA (total power from 3 transformers) Primary connection 380 volts, 50 Hz (three phases) Consisting of three transformers - data for a single transformer: Power at 50% duty cycle 70 kVA (power per transformer) Secondary voltage 7 - 10.5 volts (adjustable in 4 steps via connection terminals on the transformer) Secondary current at 50% duty cycle 6.7 kA (per transformer) Primary connection 380 volts, 50 Hz (two phases) Cooling water requirement per transformer 4 liters/min. Insulation class F - Water-cooled transformer - A water-cooled rectifier block is located on the secondary side. - Connection of the DC power output via contact surfaces 50x50mm with M20x1.5mm thread - Temperature monitor on each rectifier element and on each transformer coil - Connection cable 7-core, cross-section 50 mm², length approx. 6 m Overall dimensions WxHxD 700 x 710 x 440 mm Total weight 480 kg in good condition Ledpfx Amedzp Txjnorl

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm Ljdpfx Amey Ty Dconorl contact pressure capacity 17 - 235 daN horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, warranty duration: 3 months, type of cooling: water, welding current (min.): 5 A, welding current (max.): 260 A, Rehm Invertig 260 AC/DC Digital – Water-cooled TIG ACDC 3-month warranty Refurbished, tested, serviced, and ready for immediate use Specifications: 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 Step Pre gas / Post gas Lredpfxeyzpb Ho Amnsl Start current / End current Up slope / Down slope Frequency adjustable AC Balance AC Frequency Electode option Including Parweld PRO18 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 245 A, welding current at 100% duty cycle: 210 A, welding current (min.): 5 A, welding current (max.): 260 A, Rehm Invertig 260 AC/DC Digital – Water-cooled TIG ACDC 3-month warranty Refurbished, tested, serviced, and ready for immediate use Specifications: 5-260 AMP 380 Volt Water-cooled ACDC Pulse 2/4 Step Pre gas / Post gas Start current / End current Up slope / Down slope Frequency adjustable AC Balance AC Frequency Electode option Lsdpfxsywgpas Amnjrl Including Parweld PRO20 Welding torch, earth work cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: CPTXI400, type of input current: three-phase, input voltage: 380 V, ground cable length: 5,000 mm, warranty duration: 24 months, type of cooling: water, hose package length: 10,000 mm, welding current at 100% duty cycle: 400 A, welding current (min.): 30 A, welding current (max.): 400 A, The CPTX machine with inverter technology Industrial machine for simple welding tasks High ignition reliability Infinitely adjustable 100% duty cycle Ljdey Tuc Topfx Amnerl Increased power 30-400 AMP 100% 400 AMP Duty-Cycle including: PRO5000 4 Meter Welding Torch Earth work lead 70mm² 5 meter 10 Meter Interconnection Hose 24 Months warranty Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, input voltage: 380 V, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: water, welding current at 100% duty cycle: 400 A, welding current (min.): 10 A, welding current (max.): 420 A, For sale: Kemppi Pro Evolution 4200 10-420 AMP (100% 400A) 400 Volt Pulse Double Pulse Synergic Water-cooled 2/4 Step 4 Roller drive Soft start Hot start Down slope Fixed programs Lrsdpfx Asy Tt T Dsmnjl Program memory Steel – Stainless Steel – Aluminum weldable Refurbished, serviced, and tested Including 2x PRO5000 Welding torches, earth work cable with clamp, and gas cable. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Welding edge former INDUMASCH SIEGEN type V 12 Machine. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45° Lodsrz Tupepfx Amnerl Working speed approx. 3 m/min. Motor power 2 kW Mains connection 400 Volt, 50 Hz - Forward / return - Built-in guide roller for 45° bevel angle - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm weight 75 kg good condition

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Ledowa Uwdspfx Amnorl Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Stepless adjustment range Open circuit voltage approx. 50 V Open circuit voltage approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug Lsdpfxjyv H Els Amnerl - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration

Condition: used, DALEX Spot Welding Machine Type SF 204 Machine No. AZA/N-32865 Year of Manufacture 2010 Power at 50% duty cycle: 30 kVA Continuous power: 21.2 kVA Maximum short-circuit power: 108 kVA Maximum welding power: 86.4 kVA Throat 500 mm Arm distance 350 - 500 mm Electrode force: 65 - 360 kp (short throat) Electrode force: 25 - 140 kp (long throat) Electrode arm Ø 45 mm Electrode holder Ø 25 mm Electrode stroke 20 mm Welding capacity: Steel sheet 5 + 5 mm / max. 6 + 6 mm Brass sheet 2 + 2 mm / max. 3 + 3 mm Aluminum sheet 1 + 1 mm / max. 1.2 + 1.2 mm mm CrNi 1 + 1 mm Round steel 12 + 12 mm / 16 + 16 mm Open circuit voltage 5.2 volts Connected load 55.2 kVA Mains connection 400 volts, 50 Hz Lrodpfxsit Rq Ho Amnel - Multifunctional welding control system with Dalex RS 15 microprocessor - Lower electrode arm with swivel fitting for height adjustment and lateral swiveling - Foot pedal operation - Water-cooled (cooling water requirement 4 liters/min.) Space requirement L x W x H 1250 x 415 x 1200 mm (height = 1310 mm with base) Weight 196 kg Very good condition

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle Lsdsif Sg Sjpfx Amnsrl - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: used, AC Spot Welding Machine, Projection Welding Machine ARO Type MA 350 DC AC Resistance Welding Machine Mach. No. MA35031332 / 9731122B110 Year of Manufacture 1997 Power at 50% duty cycle: 30 kVA Power at 100% duty cycle: 21 kVA Maximum welding power: 156 kVA Thrust 550 mm Electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Cylinder stroke max. 80 mm Electrode force max. 730 daN (at 6 bar), continuously adjustable Operating air pressure 0.5 to 6 bar Lrsdpohpf Iyjfx Amnjl Mains connection 400 volts, 50 Hz Connected load 75 kVA / 63 amps / Cable cross-section 3x 16 mm² Maximum possible sheet pairing: 5 mm + 5 mm - ARO Micro welding control system 2X16 III Version 6Z2P Type 1B (6 times - 2 programs) - Continuous welding current adjustment via thyristor module - Parallel electrode guide - Double-stroke welding cylinder (pre-stroke / welding stroke) - Single-stroke and continuous spot welding modes - Electrode force continuously adjustable via air pressure - Water-cooled by external water cooling (water cooling unit not included) - Electric foot switch - Control cabinet with control system permanently mounted on the machine - PC interface RS 485 - Spot weld counter - Operating instructions for control system, spot welder, and electrical diagram included Space requirement: W x H x D 520 x 1550 x 1150 mm Weight: 290 kg Very good condition

Condition: used, Spot welding machine, projection welding machine DALEX type PL 63 Serial No. N-0051390 Year of manufacture 2018 Output at 50% duty cycle: 63 kVA Output at 100% duty cycle: 44.5 kVA Maximum welding power: 182 kVA Rated welding current: 8.77 kA Throat depth: 250 - 550 mm Maximum arm spacing: 150 to (310 mm) Upper electrode arm diameter: 50 mm Lower electrode arm diameter: 60 mm Electrode holder diameter: 25 mm Electrode stroke max.: 65 mm Electrode force: 100 - 600 daN Operating air pressure: 1 to 6 bar Power supply: 400 Volt, 50 Hz Rated current: 158 A Connected load: 137 kVA - Thyristor power stage - Welding control HARMS+WENDE - HWH MPS 10β - 5-stage control, single spot, series spot, 8 programs - Electrode force infinitely adjustable via air pressure - Parallel electrode guidance - Single-stroke welding cylinder - Water-cooled via external water cooling system (recirculating water cooler not included) - Electric foot switch - Control cabinet with controller fixed to machine - Operating manual Required space (L x W x H): 1150 x 700 x 1600 mm Weight: 335 kg Ledpfxoycv Saj Amnsrl As-new condition

Year of construction: 2013, condition: used, Dimensions (LxBxH): 2130 x 1270 x 460 cm CE compliant: yes Including control box Connection: 230/400 volt 50 Hz Maximum length of workpiece: 13000 mm Maximum width of workpiece: 500-1200 mm Maximum height: 500-1200 mm Working pressure: 6 bar Digital manual available Worktable with guide rails not present on 1 of the 2 laser welding machines Lodsy T N Tmopfx Amnsrl Sheet steel cabin: Overall dimension: 21300x12700x4600 mm Interior dimensions one part: 21000x6000x4550 mm Middle part of the roof is open one part Each part is equipped with double gate at the back and door at the front Auction by tender of the production line of KSK GmbH at Schwerte (DE). The site was active within component production for the mobile crane industry and specialized in the production of heavy, welded steel components and long-form structural parts. Among the products processed within KSK were high strength steel grades such as S690QL, S960QL, S1100QL and S1300QL. The online auction opens Wednesday 6 May and closes Tuesday 9 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation Lodpfx Aoxrb Tgomnorl - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: PS1/9173/9169/2, type of input current: three-phase, input voltage: 400 V, overall weight: 775 kg, electrical fuse: 105 A, compressed air connection: 5 bar, This Schlatter PS 130 is a robust, industrial spot welding machine renowned for its reliability in metal welding applications. Lredpfey Snycsx Amnsl

Condition: good (used), 2 used water-cooled spot welding machines Technical data: Max. welding output: 23.7 kVA Rated output at 50% duty cycle: 8 kVA Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Electrode force: 17 – 235 daN Cooling water flow rate: 4 l/min Weight: 85 kg per machine Price: 550,-- EUR net per machine Lrodey Naq Ispfx Amnsl Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, 1 pipe welding machine with rotary table/indexing head SDT-0.5, capable of welding pipes with a diameter of up to 100mm and a length of 1000mm, custom-built, mobile Color: as shown in the pictures, according to the images and on-site inspection Dimensions L/W/H: 190x180x80cm Ljdpfx Ajy Thlhemnerl Condition: used

Condition: used, Year of construction: 1977, This SCHLATTER industrial resistance welding system, type GPu 300/250, will be auctioned off in our complete online auction "Site Clearance - Fire trucks, trailers, containers, transport boxes, paternoster storage system." Further details on the machine: Industrial resistance welding system from the Swiss manufacturer Schlatter. Lrjdpfxsy Takvj Amnsl SCHLATTER welding system, type GPu 300/250, serial no. S1.3644.1095, year of manufacture 1977; primary voltage 380 V / 3-phase / 50 Hz, apparent power 196.87 kVA, welding current 230 A / 795 A, cooling water requirement 30 l/min at 4 bar. As shown in the pictures, functionality not tested. Does not include any other items shown in the pictures.

Condition: used, Working width: approx. 40 cm Ledpfxjt N Akbs Amnerl Weight: 37 kg Motor: 1.3 kW The Nilco BA33-33E cleaning machine is a compact, high-performance scrubber-dryer designed for thorough cleaning of hard floors.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, welding current (min.): 5 A, welding current (max.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 Step Pulse Pre gas / Post gas Up slope / Down slope Start current / End current Elektrode option Steel + Stainless Steel weldable test welding possible Including 4 Meter SR17 welding torch, earht work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Ljdpfx Ajy Rqh Tsmnerl Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm 1 drill beam with 26 spindles, center distance 32 mm 3 hold-down devices 1 foot switch Lrsdpfew I Unwsx Amnel Availability: short term Location: Röllbach

Condition: used, Straightening and welding plate made of steel Machined steel plate from a tool frame Length: 2980 mm Width: 1380 mm Thickness: 74 mm - solid steel plate - milled surface Lrsdpfx Aey N Du Rjmnol - 4 rectangular cutouts - plate equipped with several symmetrical bores - 4 bolted towing brackets Net weight: 2175 kg

Condition: used, Spot Welding Machine DALEX Type SL 16 - 2 Machine No. ZZH/N-10183 Year of manufacture: approx. 2002 Rated power at 50% duty cycle: 16 KVA Maximum welding power: 50 KVA Max. throat depth: 500 mm Max. electrode force: 17 - 278 daN Electrode arm Ø 45 mm Electrode holder Ø 25 mm Arm spacing: 150 mm / 300 mm Operating pressure: 1–6 bar Open circuit voltage: up to 3.6 Volt Connected load: 37 kVA Mains connection: 400 Volt, 50 Hz - Weld control MPS 200-003 - Welding cycle triggered via electric foot switch Lodpfey N Duksx Amnsrl - Water-cooled Required space (L x W x H): 1100 x 720 x 1450 mm Weight: 230 kg Very good condition