Used Webomatic Aps Ml 7100 for sale (2,075)

Condition: new, Heidenhain LC 192F length measuring system, ML 340 mm, part number 387093-25, serial number 17500653G, unused, in original packaging, 100% functional, scope of delivery as shown in the photos. Fpedpfx Ahei Eal Hjlek

Condition: new, Heidenhain LS 776 linear scale, measuring length: 420 mm. Part number: 336 966-74, serial number: 17066394H + AE LS 776 read head. Part number: 326 797-35. Unused, in open original packaging, 100% functional. Scope of delivery as shown in the photos. Fjdpsi Eatmefx Ahlopk

Condition: ready for operation (used), Heidenhain LS 704 ML 720 ID 237 133 05 SN 4061337E + LS 704 read head SN 3225259E, professionally completely overhauled and tested with 6 months warranty, good condition, 100% functional, scope of delivery as per photos Fjdpfjrv R Nhex Ahlopk

Condition: new, Heidenhain LS 106C length measuring scale, ML 440 mm, art. no. 336961-40, serial no. 155103690F, unused, in original packaging, 100% functional. Scope of delivery as shown in the photos. Fedpfxoi Eap Hj Ahlopk

Condition: new, Heidenhain LS 106C length measuring system, ML 440 mm, item no. 336961-40, serial no. 15510392F, unused in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fjdpfji Eap Rjx Ahlepk

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Fpsdperfx Tnsfx Ahlsk Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: used, Lumsden 93 ML Vertical Spindle Rotary Surface Grinder, fitted with 60 inch dia magnetic chuck. Available for immediate supply. Full rebuild, all new Bearings, feed unit rebuilt, new main motor, drive belts, new H/D coolant tray, new panel inc electronic mag unit, Pilz 2 Channel safety switch circuit, door interlocks with motor rundown sensor incorporated, new oil/grease pipework. Fsdpjzlkd Uefx Ahlopk

Condition: ready for operation (used), Heidenhain LS 706 length measuring rod ML: 2040 . 277504 35 SN:5996409E + AE 10 reading head . 276 504 01 D, used, normal signs of wear, 100% functional, scope of delivery as per photosATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Fpedpfx Ahsx Ht D Nelsk

Condition: new, Dimensions with base frame: approx. 1500 mm x 1400 mm Feed speed: 27 m/min Rotor blades: 2 Stator blades: 1 Fedpfxjyr Tu Rj Ahljpk Infeed cross-section: approx. 10 x 40 mm Drive motor: 1.5 kW Weight with base frame = approx. 270 kg

Condition: used, Second-hand HAPFO AP 5000/ME copy lathe for professional use in woodworking. The machine is designed for copy turning of workpieces and is suitable for typical turning and shaping work on wood. Technical data: - Centre-to-centre distance: 1,300 mm - Centre height: 250 mm - Motor: 1.4 kW Fpjdpszrx Sasfx Ahlok

Condition: used, mileage: 578,766 km, power: 205 kW (278.72 HP), first registration: 07/2013, fuel type: diesel, empty load weight: 6,880 kg, maximum load weight: 5,110 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, total length: 8,950 mm, loading space length: 6,900 mm, loading space width: 2,450 mm, Year of construction: 2013, construction height: 3,400 mm, Equipment: ABS, tail-lift, trailer coupling, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Fpodpfxozt Aako Ahlsk Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 684,497 km, power: 205 kW (278.72 HP), first registration: 07/2013, fuel type: diesel, empty load weight: 6,830 kg, maximum load weight: 5,160 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, next inspection (TÜV): 10/2026, fuel: diesel, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, total length: 8,950 mm, loading space length: 6,900 mm, loading space width: 2,450 mm, Year of construction: 2013, construction height: 3,400 mm, Equipment: ABS, tail-lift, trailer coupling, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Fedpfx Ahjzt Aadslepk Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, functionality: unexamined, machine/vehicle number: ML-348, Used Hyco ML-348 Vacuum Diaphragm Pump Fjdew Evhzspfx Ahljpk Model: ML-348-D37-SA Type: p-227/1 | 207/1 | p-173/2 Voltage: 230-400, 50/60 Hz Multiple units in stock.

Condition: used, mileage: 600,650 km, power: 206 kW (280.08 HP), first registration: 10/2014, fuel type: diesel, empty load weight: 6,790 kg, maximum load weight: 5,200 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 8,900 mm, loading space length: 7,050 mm, loading space width: 2,400 mm, loading space height: 2,100 mm, Year of construction: 2014, construction height: 3,350 mm, Equipment: ABS, electronic stability program (ESP), tail-lift, trailer coupling, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge Fpodpfozttipex Ahlek A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: ready for operation (used), Heidenhain LS 706 linear scale ML 520 mm Id. 277 504 18 SN:6304918F + AE LS 706 read head . 276 504-31 , the item has been fully overhauled, used, with normal signs of wear, 100% functional, scope of delivery as per photos. Fsdpfx Ahex Er Idjlepk

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK40 - Spindle power : 32,5 [kW] - Spindle speeds : 40.000 [rpm] - Number of spindle hours : 1.211 [h] LINEAR AXES - Travels on X/Y/Z axes : 420 / 320 / 320 [mm] - Cutting feed rates (X/Y/Z) : 60.000 [mm/min] A ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0,001 [°] Fpodpfjuhbuuex Ahlek - Cutting feed rate : 200 [rpm] B ROTARY AXIS - Travel : 100 [°] (+/-) - Indexing precision : 0,001 [°] - Cutting feed rate : 200 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 - Tool exchange time : 5 [sec] TABLE - Table dimensions : Ø 250 [mm] - Maximum weight upon table : 20 [kg] - Distance table / spindle nose (min./max.) : 40 / 360 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 35 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2.050 x 2.555 [mm] - Machine height : 2.520 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 4873 [h] EQUIPMENT - CNC : Heidenhain iTNC530 - Electronic handwheel - Linear scales - 3 colors status lamp - Coolant tank * With washing gun - Chips conveyor - Oil mist extractor : FILTERMIST FX5002 - Spindle cooling unit - Electrical cabinet air conditioning - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool-holders : 60 - Tool preparation bench

Condition: new, functionality: fully functional, mileage: 2,850 km, power: 206 kW (280.08 HP), first registration: 12/2025, fuel type: diesel, overall weight: 15,000 kg, tire size: 395/85R20, axle configuration: 4x4, wheelbase: 4,150 mm, next inspection (TÜV): 12/2026, fuel: diesel, brakes: engine braking, color: brown, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro6, suspension: parabolic leaf (spring), number of seats: 2, Year of construction: 2023, steering wheel position: left, Equipment: ABS, air conditioning, all wheel drive, compressor, cruise control, differential lock, low noise, onboard computer, parking heater, power assisted steering, seat heater, soot filter, truck registration, NEW VEHICLE, first registration 12/2025, for sale on behalf of a CUSTOMER! Errors and prior sale excepted! WARRANTY EXTENSION to 36 months from the date of first registration! The cab was originally gray; it was repainted in “petra-copper-metallic” – a Land Rover color. The frame and cab were also completely waxed and preserved afterward. A spare wheel holder is now mounted at the rear under the chassis frame. In addition to the standard equipment, the following factory options are installed: Differential lock on the driven front axle Rear axle ratio i = 5.72 Spare wheel, dimension matches chassis tires Batteries 170 Ah for Eurocargo Battery disconnect switch, electrically mounted in the cab Generator 2800 Watts (24 Volt x 120 Ampere) Voltage converter 24/12 Volt (10.5 Ampere) Preparation for toll system (OBU), includes third DIN compartment, antenna and wiring on the dashboard, without receiver unit Front and ramp mirrors are manually adjustable but heated Luxury passenger seat, 4-way adjustable, air-sprung, integrated headrest and seat belt, heated, lumbar support Compressed air connection in engine tunnel console Electronic immobilizer and 3rd vehicle key Driver's seat HI-Comfort, air-sprung, with 3-stage cooling or heating function, multi-adjustable, lumbar and head support, with integrated 3-point seat belt Iveco radio DAB+, Bluetooth, integrated microphone, mini-USB / AUX-in connection, LCD display Air conditioning with manual control Multi-function steering wheel with steering wheel controls Lower bed, folding, 3-part Pollen filter for cab Rearview mirror for body width 2500 mm Windshield and side windows tinted Protective grille for headlights Sun visors for side windows, driver and passenger side Sun protection filter integrated into the windshield Auxiliary heater, diesel/air, with timer (Eberspächer, AirTronic D2), heat output 2.2 kW Preparation for roof beacons Trailer socket for 12 Volt operation, 13-pin Trailer socket for 24 Volt operation, 15-pin Fuel tank in plastic version, with 200 liter capacity, lockable Fuel pre-filter, Racor type, with separator, heated Air tank in aluminum version, number depends on suspension version and trailer version Rear crossmember, D-value 120kN Parabolic spring on the front axle Parabolic suspension on the rear axle Exhaust pipe on the left side Adjustment of exhaust pipe for fording CAN-Bus interface "CAN-OPEN" for body control Fjdpfx Aszt H Acshljpk Air compressor 360 ccm, recommended for trailer operation with continuous braking system For sale on behalf of a CUSTOMER! Errors and prior sale excepted! Purchase / financing / hire purchase / leasing / rental possible. Errors and prior sale excepted! Pictures may contain optional equipment that is subject to an additional charge! Delivery date by arrangement! Inspection only by appointment! Address is only the office address, not the vehicle location! Our general terms and conditions apply!

Condition: good (used), Year of construction: 1999, CNC PUNCH / DRILL / SHEARING LINE for angle and plates. TECHNICAL DATA. PUNCH INSTALLATION. MATERIAL SPECIFICATION material sample steel 52 plate size (MM) X (MM) max 300 x 25 material sample steel 37 plate dimension (MM) X (MM) min 60 x 6 max 400 x 20 angle line dimension min 50 x 50 x 5 max 150 x 150 x 5 Punch information TYPE P2- XXX-XX number 2 TYPE P3-XXX-XX number 3 TYPE P5-XXX-XX number 5 punching capacity tonnage 110 punching diameter (mm) x thickness (mm) max 32 x 20 Fsdpfevkphgox Ahlopk Shear UNIT Shear tonnage 180 Capacity max 400 x 20 Stamping UNIT Total number of characters number 40 Maximum number of characters per operation 12 CONNECTION VALUES Voltage 3 phase + Neutral + Earth V 3 X 400 Fuse A 63 slow Power KW 25 Frequency HZ 50 Permitted m-axis tolerance mains voltage % +/- 10 Field rotation Right Air pressure bar 6-8 Air capacity m2 / hour 250

Condition: used, mileage: 481,860 km, power: 206 kW (280.08 HP), first registration: 10/2014, fuel type: diesel, empty load weight: 6,930 kg, maximum load weight: 5,060 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 8,900 mm, Year of construction: 2014, construction height: 3,350 mm, Equipment: tail-lift, trailer coupling, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Fpjdpfozqvy Eex Ahlsk Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 210,500 km, power: 118 kW (160.44 HP), first registration: 09/2014, fuel type: diesel, empty load weight: 5,070 kg, maximum load weight: 2,420 kg, overall weight: 7,490 kg, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 2, total length: 7,250 mm, loading space length: 5,400 mm, loading space width: 2,200 mm, Year of construction: 2014, construction height: 3,300 mm, Equipment: ABS, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Fleets Very large selection of Iveco Daily, Volkswagen Caddy and Volkswagen T5 from Deutsche Post. Other: - Various loading options - Registration service - Delivery possible within Germany for an additional charge A viewing is also possible without registration: Mon. &#8211, Fri.: 8:00 a.m. to 5:00 p.m. Sat.: 9:00 a.m. to 2:00 p.m. Address: Hauptstr. 90 76865 Rohrbach (Pfalz ) Tel.: E-mail: Fpsdpfxjzqvy So Ahlok You can find more information at We speak German / English / Russian / Italian / French / Spain More Information Only sold to traders (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, mileage: 257,000 km, power: 206 kW (280.08 HP), first registration: 10/2014, fuel type: diesel, empty load weight: 6,960 kg, maximum load weight: 4,030 kg, overall weight: 11,990 kg, wheelbase: 4,815 mm, next inspection (TÜV): 09/2026, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 8,900 mm, loading space length: 7,050 mm, loading space width: 2,400 mm, loading space height: 2,100 mm, Year of construction: 2014, construction height: 3,350 mm, Equipment: tail-lift, trailer coupling, Purchase or trade-in of: - Transporters - Forklifts - Commercial vehicles - Special vehicles - Vehicle fleets Very large selection of Iveco Daily, Volkswagen Caddy, and Volkswagen T5 vehicles from Deutsche Post. Other services: - Various loading options - Registration service - Delivery available within Germany for an extra charge Viewings are possible without prior appointment: Mon. – Fri.: 08:00 to 17:00 Sat.: 09:00 to 14:00 Address: Hauptstr. 90 76865 Rohrbach (Pfalz) Tel.: E-mail: For more information, visit We speak German / English / Russian / Italian / French / Spanish More Information Fsdpfxszqvyxe Ahlepk Sales only to businesses (agriculture, freelancers, small...

Condition: used, mileage: 134,899 km, power: 134 kW (182.19 HP), first registration: 12/2005, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, Equipment: all wheel drive, crane, Wheelbase: 3.69 m Fodozpddcjpfx Ahlopk

Condition: as good as new (ex-display), Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Feed speed (m/s) 1-5 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Fpsdjtzkgbopfx Ahlsk Feed motor (kW) (2x) 0.12 Total power (kW) 5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: used, Year of construction: 2000, operating hours: 26,600 h, machine/vehicle number: LC612, Used Tetra pak line Overhauled TBA 19 200 ml slim Technical Specifications & Performance DataThis used bottling line is a second hand Tetra Pak aseptic carton packaging solution configured for 200 ml Slim packs. It is engineered for industrial packaging and beverage production of milk and juice products, with reliable performance and efficient downstream handling.Configuration: Tetra Pak TBA/19 200B Slim filler + TSA21 straw applicator + TCP70 case packer + conveyor line + line controller and paper trolleyProduction speed: up to 7,500 packs/hourPack volume: 200 ml SlimFilling technology: AsepticContainer type: Carton (brick packs)Main models and codes: TBA/19 200B (Dev. Step 010V), TSA21, TCP70Operating hours: 26,600Indicative years: filler 2000, packer 2008, straw applicator 2000Advanced Automation & Control SystemsThe line is equipped with industrial automation architecture suitable for high-uptime food and beverage operations. Assessment indicates a GE PLC platform on downstream equipment with recommended PLC and I/O cover upgrades to ensure long-term reliability.Control: Central line controller with integrated conveyor logicPLC/HMI: GE PLC upgrade recommended for DE modulesChangeover: 200 ml Slim change kit included; additional format parts may be required for other sizesSafety: Guarding and interlocks typical of aseptic packaging machineryProduction Line Integration CapabilitiesThis second hand bottling equipment is designed for inline operation from aseptic filling through straw application and case packing. Conveyors provide smooth transfer between machines, enabling balanced production flow and efficient accumulation.Inline operation: Filler → Straw applicator → Case packerMaterial handling: Conveyor line with integration to line controllerApplication range: Ideal for milk and juice in 200 ml Slim cartonsScalability: Potential to adapt to additional carton sizes with proper change partsMachine Condition & Maintenance HistoryThe line has been assessed after maintenance activities and prior to full recommissioning. The filler can be operated up to production step (water test completed). Downstream equipment (DE) powers on but requires further interventions before heating and full operation. An overhaul is recommended with component replacements across superstructure, machine body, jaw system, final folder, service unit, strip applicator, and electrical systems.Current status: Under maintenance/refurbishmentCondition summary: Filler fair-to-poor; DE in poor condition; overhaul advised (6,000/8,000/12,000-hour packages)Operational Performance & VersatilityEngineered by Tetra Pak for aseptic beverage production, the line supports long-life products such as UHT milk and ambient juices. The TSA21 straw applicator ex... Fpjdpjyvilzefx Ahljk

Condition: used, Power supply, power converter, power supply, switching power supply, DIN rail power supply, power supply, servo module, -Manufacturer: Pilz, power supply power supply type P10 APS -Power supply: ELBA-electric type euro power ESPS835515/X Fpjdpspk Iq Nsfx Ahlsk -Card block: Phoenix Contact SKBI 64/H15- -Dimension: 120/70/H190 mm -Weight: 0.5 kg/pc.