Used Tbt T30-750 for sale (4,063)

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Lrodpfxsw E H E Ro Amnol Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Lsdpfxewh Rp Ej Amnerl Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 106546-11, total height: 3,550 mm, total length: 7,185 mm, total width: 4,720 mm, overall weight: 8,000 kg, The drilling method used by the deep hole drilling machine is single-lip gun drilling. Drilling Unit Information: - Number of spindles: 1 - Spindle speed, infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one pass, no retraction required) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread cutting: M27 - Milling material removal rate: 250 ccm/min Travel Paths: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steadies) Traverse Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid System Information: - Coolant supply: deep drilling oil - Tank capacity: 1,200 liters - 1 x scraper-belt chip conveyor - 1 x screw conveyor system - 1 x hydraulic unit and pneumatic unit/equipment Lsdpfxoxdm Awe Amnsrl - 1 x central lubrication system - 1 x submersible pump: Pump delivery: 200 l/min - 1 x low-pressure pump: Pump delivery: 100 l/min Drive power: 2.2 kW - 1 x compact band filter: Filtration rate: 175 l/min For machining steel and non-ferrous metals - 1 x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1 x air cooler (heat exchanger): 22.5 kW - 1 x oil mist extraction unit: Extraction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine comprising: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permitted tool diameter: 80 mm - Max. permitted tool length: 250 mm - Number of tool storage positions: 80 - 2 x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic positioning to home position. Clamping Table with B-Axis and NC Rotary Table: - Length / width: 800 x 600 mm - B-axis: 360° - Positioning accuracy, B-axis: +/- 30 seconds - Table travel: 800 mm - Payload (centered): 1,500 daN Electrical Equipment Information: - 1 x CNC control system, Heidenhain iTNC 530 - 1 x drilling process monitoring - 1 x RENISHAW touch probe Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Condition: ready for operation (used), Drilling diameter 5 ~ 25 mm Drilling depth 1000 mm Headstock Ledpfedgpltox Amnjrl Tank pump Filter

Condition: reconditioned (used), -Drilling diameter 5~25 mm Lodpfxehuil Re Amnerl -Drilling depth 1500 mm -Tailstock -Tank -pump -Filter

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 675002, travel distance X-axis: 650 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 500 mm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 650 mm Lredpfxjy Rxryo Amnsl Travel Y-axis: 1,100 mm Travel Z-axis: 500 mm C-axis rotation: 360° MACHINE DETAILS Control: CNC Dimensions & Weight Dimensions (L x W x H): 3,500 x 1,800 x 2,800 mm Net weight: 13,000 kg EQUIPMENT Chip conveyor Tool magazine Probe

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 0-250-08-1590, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,220 mm, travel distance Z-axis: 125 mm, controller model: Homatic 2000 IPC, number of spindles: 28, spindle speed (max.): 24,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 200 – 3,250 mm Working area Y-axis: 70 – 1,220 mm Working area Z-axis: 12 – 125 mm (clearance 150 mm) Tool changer positions: 18 Spindles Lodpfx Amjy Rmdqonerl Total number of drilling spindles: 28 Vertical drilling spindles: 22 Horizontal drilling spindles in X-axis: 4 Horizontal drilling spindles in Y-axis: 2 Milling spindle power: 12 kW Milling spindle max. speed: 24,000 rpm C-axis: 360° interpolation MACHINE DETAILS Vacuum pump capacity: 100 m³/h Control model: Homatic 2000 IPC Control software: WoodWop 4.5 incl. MDE and production list software FEATURES 4 axes Console table 8 manually adjustable supports in X direction 3 vacuum cups per console Vacuum connection for templates Laser positioning aid for vacuum cups Laser projection for cup positioning Liquid circulation cooling Operator terminal Note: The sale does not include the pictured adapter units, tools, or HSK holders.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 41 mm, turning diameter over bed slide: 330 mm, turning diameter over top slide: 160 mm, center height: 160 mm, turning length: 750 mm, Manufacturer: Weiler Model: C30 x 750 Year: 2010 Swinging diameter above bed: 330 Swinging diameter above carriage: 160 Maximum turning diameter: 330 Maximum turning length: 750 Chuck diameter: 160 Lrsdpfx Ajy Ta Aremnel Spindle bore: 41 Spindle motor power: 7 Spindle nose: DIN 55027 Gr. 5

Condition: used, Year of construction: 2019, groove width 3-100 mm drawing length 750 mm working speed 0-20 m/min boring diameter 10-500 mm cutting speed 0-20 m/min return speed 0-50 m/min carrying capacity 35.000 kg Power connection 12,27 kW cutting capacity 40.000 N machine table 500 x 770 mm weight of the machine ca. 2,1 t Equipment / accessories: Original year of manufacture reconditioned in 2019 and equipped with new controler Lrjdpfx Amey Tigtsnel - dividing head - many accessories (grooving knives, tools, various) - Documentation

Condition: used, Year of construction: 2023, An as new 2023 and hardly used, XYZ TMC 750 Toolroom VMC with RMX wide screen control, additionally specified with: Advance Features RMX, Tacking including retractable Electronic Handwheels, and DXF Converter - cost in excess of £50,000 + VAT when new! Specification: Working Area 743 x 425 x 489mm Table Size 830 x 410mm Spindle Centre to Column 500mm Spindle to Table 100 - 600mm Column Front to Table Centre 305 - 745mm Rapid Feedrate 20 M/min Cutting Feedrates 1 - 20,000 MM/min Max Table Load 500kg T Slot Size 16mm T Slot Number & Pitch 3 off @100mm Spindle Speeds 5 - 8,000 rpm Spindle Motor 11kW (15hp) Spindle Taper BT40 20 Station Carousel ATC Lodoyh Ixmjpfx Amnsrl Chip to Chip Tool Change Time 8 secs Max Tool Diameter 100mm Max Tool Weight 7kg Coolant Tank Capacity 125L Ballscrew (Grade C3) 32mm Dia P8 AC Servo Motor Max Torque X = 5 Nm / Y = 5 Nm / Z = 10 Nm Machine Weight 3,500kg Footprint 2,392 x 2,460 x 2,670m Control: ProtoTRAK RMX Spec: X 743 Y 425 Z 489 / 8,000RPM / BT40 Accessories: Advance Features RMX, Tacking including retractable Electronic Handwheels, and DXF Converter

Condition: used, Year of construction: 2009, Doosan Mynx 750/50 4 Axis Vertical Machining Centre with Fanuc Series 21i-MB CNC Control, Kitagawa MR320RAE04 4th Axis Unit 310mm 3 Jaw Chuck, Table Size 1600mm x 750mm, 40 Tool ATC, BT50 Spindle Taper, Filtermist FX7002 Oil Mist Extractor, Kaukan Chiller Unit, Profluid MCF 20 Coolant Pressure Filter Unit, Machine Weight 13500kg. S/No. MYNX 7500373 (2009) Includes Work Bench, Vice and Various BT50 Spindle Tool Holders. Country of Origin: Korea Lrsdpfxsy Ic Dus Amnel Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2022, machine/vehicle number: 0102-260011, Kaltenbach KBS750 DG Bandsaw Line with T14 transport system Kaltenbach KBS 750 double mitre horizontal bandsaw with LS270 NC cross-cut fence and T14 transport system in steel trade version - operation and programming are carried out at the control panel. Lredpfx Ajy Rimusmnjl This Kaltenbach KBS 750 DG horizontal bandsaw is a very fast and powerful bandsawing machine that is ideally suited for sawing sectional steel such as horizontal double T-beams, L-steel U-steel, flat material and rectangular tubes. KALTENBACH KBS 750 DG band saw Semi-automatic two-column bandsaw for sawing profiles with double miter swivel device. Technical data Cutting capacity: with 90° saw cut 750 mm × 500 mm +70°: 730 × 500 mm -70°: 710 × 500 mm +60°: 670 × 500 mm -60°: 650 × 500 mm +45°: 550 × 500 mm -45°: 520 × 500 mm +40°: 500 × 500 mm +30°: 390 × 500 mm Technical data: Min. profile cross-section: 10 × 10 mm Saw blade dimensions: 6990 × 41 × 1.3 mm, type bimetal M42, Z3/4 Drive power: Saw with frequency control: 5.5 kW Hydraulic unit (4.9 l/min): 1.5 kW Cutting speed: 15-100 m/min, continuously adjustable from the control panel Feed: work feed: 0-300 mm/min Fast forward and return: 2500 mm/min Working height: 640 mm Compressed air connection: 6-8 bar Air consumption: 500 NL/min (according to DIN 1342) Saw weight: approx. 3200 kg Saw dimensions: 3230 × 1160 × 2420 mm Electrical system: Version according to EN 60204-1 Mains connection: 3 phases + N + PE / 50 Hz Power consumption: 17 kVA Fuse protection: 35 A Machine equipment Kaltenbach KBS 750 DG Very robust two-column guide for maximum precision. Inclined saw arm for higher performance and accuracy. Automatic table lowering during material transport Infinitely variable speed control via frequency converter. Hydraulic belt feed, manually adjustable NC-controlled angle adjustment with absolute value encoder Automatic cycle: Clamping - sawing - unclamping Horizontal clamping device: Fixed front stop, opposite clamping block via cylinder. Manually adjustable pressure reduction. Vertical tensioning device: Directly next to the belt; manually adjustable pressure. Backlash-free linear guides. Automatic adjustment of the belt guides Automatic cutting pressure control Remote diagnosis possible (telephone line required by customer) Hydraulic belt tensioning with electronic monitoring Automatic release at standstill Automatic stop in the event of belt breakage Micro-spraying system for clean operation and long service life Integrated chip container Separately driven chip brush Electronic slip monitoring Hydraulic heating

Condition: used, Stanzkraft: 750 kN (punching force e.g. 30 mm hole in 22 mm material), with search device via foot switch for anchoring Overhang: 320 mm Cuts 450 x 15 mm or 300 x 20 mm on the angle/flat bar shear Support table on the punching side Lredpor R Auzefx Amnsl Two separate foot switches for the punching and shearing side, so that punching and shearing can be performed independently Assortment of tools is included in the price

Condition: new, WAGO 750-323 Profibus DP 12 MBd/ Digital SN 93787 -unused!- ,unused, in sealed original packaging, 100% functional, scope of delivery as per photos Lsdpfx Aey Srrvsmnsrl

Condition: new, WAGO 750-323 Profibus DP 12 MBd/ Digital SN 93787 – unused! – unused in opened original packaging, 100% functional, scope of delivery as per photos. Ledey Srr Aopfx Amnsrl

Condition: new, Year of construction: 2025, pressure 060 t stroke 350 mm table surface area 750x344 mm dayligth 197/750 mm distance between columns 750 mm Lrjdsxu Nvzepfx Amnsl diameter of piston 75 mm

Condition: used, axle configuration: 1 axle, first registration: 07/2014, loading space length: 4,500 mm, loading space width: 2,100 mm, loading space height: 2,200 mm, total length: 4,750 mm, total width: 2,200 mm, total height: 3,160 mm, suspension: air, tire size: 195/14, wheelbase: 2,060 mm, color: other, Year of construction: 2014, Equipment: tail-lift, = Additional options and accessories = - Tail lift = Remarks = Number of axles: 1, Payload: 1,230 kg, Unladen weight: 1,270 kg, Gross weight: 2,500 kg, Chassis type: Full chassis, Chassis material: Steel, Tail lift, Tail lift type: Rear tailgate, Tail lift capacity: 750 kg, Tail lift manufacturer: Dhollandia dhlm.10, Tail lift material: Steel and aluminium = Further information = General information Cab: Day cab Registration number: ON-30-KB Driveline Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tyre size: 195/14 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tyre tread left: 5 mm; Tyre tread right: 5 mm Weights Unladen weight: 1,270 kg Payload: 1,230 kg Gross vehicle weight (GVW): 2,500 kg Functional Tail lift: Dhollandia dhlm.10, rear tailgate, 750 kg Loading height: 92 cm Environment Emission class: Euro 0 Condition General condition: average Ledpfxjy Iv Uto Amnerl Technical condition: average Visual condition: average Damages: none

Condition: good (used), mileage: 593,835 km, power: 552 kW (750.51 HP), first registration: 08/2022, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2022, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, fridge, onboard computer, parking air conditioner, parking heater, retarder, soot filter, spoiler, = Additional options and accessories = - Aluminum fuel tank - Heated mirrors - Alloy wheels - Air suspension - Particle filter - Sleeper cab - Sun visor - Auxiliary heater = Notes = Volvo FH16.750 Globetrotter XL 4x2 - Full spec - Retarder - Full air - I parkcool - Navigation Model Year: 30-8-2022 Mileage: 593835 YV2R0P0A4NB379031 00-BTK-6 APK/TUV: 30-08-2026 Volvo gold contract Full spec Retarder Leather Full air suspension Alloy wheels Navigation I parkcool Etc = Further information = Technical information Number of cylinders: 6 Lrjdpfx Aoy S T E Djmnsl Engine displacement: 16,123 cc Transmission Gearbox: I-Shift, automatic Axle configuration Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Alloy wheels; Max. axle load: 8000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle: Tire size: 315/70R22.5; Dual tires; Alloy wheels; Max. axle load: 11500 kg; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Weights Unladen weight: 9,039 kg Payload: 11,961 kg GVW: 21,000 kg Maintenance, history, and condition APK (technical inspection): valid until 08.2026 Technical condition: good Optical condition: good Identification License plate: 00-BTK-6

Condition: used, mileage: 279,178 km, power: 552 kW (750.51 HP), first registration: 11/2021, fuel type: diesel, overall weight: 29,000 kg, axle configuration: 3 axles, brakes: retarder, color: brown, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, COMING SOON!! Vehicle is currently en route. Further details and photos will be available shortly. General Vehicle Data: Model: Volvo FH16 750 6x2 * VIN: YV2R0P0C8MB351815 ----Cab and Comfort:* Roof spoiler for Globetrotter and XL (included) * Side window wind deflectors * Mud flaps in cabin color (A-pillar) * Cabin: Globetrotter XL, extra-high sleeper cab * Living Package Plus: Two beds (lower bunk foldable, upper bunk foldable and height-adjustable) * Air conditioning: Automatic climate control with multiple sensors and activated carbon filter * I-Park Cool (Integrated auxiliary air conditioning with automatic temperature control) * Auxiliary heater: Engine and cab * Cool box: 33 l with freezer compartment * Seats: Driver's seat Luxury (air-sprung, heated, ventilated, electric, 3 memory), Co-driver's seat Comfort recliner * Interior: Leather (Raven/Coral), soft textile, seat covers leather black/green/yellow * Table: Foldable and height-adjustable on lower bunk * Table, bottle holder, writing board for steering wheel * Storage compartments: Above bunk (245 l), under bunk, under cab * Sun visors: Interior electric, side both sides, exterior * Windows: Electric windows, tinted glass * Sunroof: Electric, tinted glass * Sleeping compartment: 24 V connection, reading lamps, curtains ----Infotainment:* Radio with DAB/DAB+, 8 speakers * Additional amplifier, 400 W, 8 channels with subwoofer * Navigation (TomTom App, Europe maps) * Digital 12'' driver information display, 9'' touch display * Reversing camera (digital), heated lens and automatic lens protection * USB connections (3x) * Preparation for TV/infotainment * Additional digital camera (included with BUPMON) * Central locking with remote control ----Electrical System, Lighting:* LED main headlights with adaptive high beam * LED daytime running lights, LED fog lights, LED rear lights * Static LED cornering lights * Headlight cleaning system * Rain sensor for windshield wipers * Automatic light switching between daytime running lights and low beams via light sensor * Work lights at the rear, top (LED) ----Safety and Assistance Systems:* Active Safety Plus Package * Driver alert system (fatigue detection) * Lane departure warning with steering assistance * Lane change assistant * Adaptive cruise control (ACC) with collision warning and emergency braking function * Reversing camera (digital, heated, lens protection) * Close-range camera, co-driver side * Alarm system for cab, body, and trailer * Immobilizer (transponder in key) * Airbag, driver's side * Disc brakes: front/rear * Electronic Braking System (EBS), ABS, ESP * Smoke detector ----Engine and Drivetrain:* Engine: D16K750, 16.1 l displacement, 6 cylinders, 751 hp (552 kW), 3,550 Nm * Emission standard: Euro 6 (SCR, particulate filter, EGR, two-stage turbocharger) Lrodpey T Dx Refx Amnel * Transmission: I-Shift ATO3512F, automated 12-speed transmission with overdrive, max. 3,550 Nm * Auxiliary drive PTER-DIN, engine-side with preparation for pump according to DIN 5462 * Retarder: Compact retarder, transmission-mounted, 450 kW braking power * Engine brake Volvo Engine Brake+ (VEB+), meets ADR braking regulations * Tag axle: rigid & liftable * Drive type: 6x2 * Drive axle: Differential lock * Axle loads: Front axle max. 10 t, Rear axle max. 22.5 t, Tag axle 9.5 t ----Additional Equipment:* Sun visor * Additional headlights on chrome bar * Rims: Dura-Bright polished aluminum rims (front, drive and tag axle) * Trailer coupling Ringfeder RF4

Condition: used, Year of construction: 1962, machine/vehicle number: 7188, saw blade diameter: 750 mm, We are offering this used Kaltenbach HDM 750 cold saw, year of manufacture 1962. Ledpfx Amsx T Abdonerl Type: HDM 750 Machine number: 7188 Hardness of hardened steel at low speed: 60-90 kg/mm² Hardness of mild steel at high speed: ≤60 kg/mm² If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1996, turning diameter 380 mm Lsdpfxex U Enco Amnjrl turning length 750 mm control HEIDENHAIN ManualPlus total power requirement 9 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,4 x 1,7 x 1,7 m

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 300 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. Lrodpey Tvx Nofx Amnsl - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 300 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2404.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you realize your projects, from planning to ordering to assembly.

Condition: new, Year of construction: 2020, Cantilever rack NEW PRODUCT Data: - H: approx. 416 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 750 kg load per arm - 2250 kg load per stand Lsdpfxjy Tvuds Amnerl - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 100 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2631.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Our recommendation: Tell us what you need... We will be happy to help you realize your projects, from planning to ordering to installation. Delivery is possible on request at a reasonable price.

Condition: excellent (used), Year of construction: 2016, CNC FANUC 0i - TC Axes X, Y, Z: 1630, 762, 650 Rapid traverse X – 30, Y – 30, Z -24 m/min Table size 1630 x 760 Usable table load of 1300 kg Spindle cone SK40 Spindle speed 12,000 rpm Tool magazine 30 Chip tank Linear guides in all axes (roller guided) Coolant nozzles on the spindle nose Lrjdpfx Amjqzhfxsnjl Electronic handwheel (transportable) for 3 axes 3 colors signal light Accesories Coolant system with pumps, spindle cooler, handwheel, transformer & 1x set of documentation

Condition: used, Year of construction: 2000, max swing 700 mm, X/Y 255/520 mm, 12-position upper tool turret and 8-position lower tool turret with driven tools, measuring head, tailstock, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 15 t Lrodpfx Ajym Sx Dsmnel