Used Roche Roche Lightcycler 1.5 Thermal Cycler for sale (4,557)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, ABB IRB 1600ID-4/1.5 IRC5 M2004 robot, mechanics only Number of axes: 6 Max. payload: 4 kg Max. working range: 1500 mm Year of manufacture: 08/2013 Serial number: 1600-100666 Scope of delivery: Robot mechanics Guodpfx Aajzmukzsxoh Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city, and postal code. Freight costs upon request – please specify delivery address.

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length Guedpfx Aoz Ai Tpeaxoh - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Year of construction: 1993, condition: used, functionality: fully functional, We offer this used ALMORE Mini calo cutting line for thermal insulation, built in 1993, with a double unwinding unit from Jouanel, in very good working condition. These machines are specialized in sheet metal processing and are particularly suitable for thermal insulation, industrial thermal insulation, and ventilation workshops. Functions include: length cutting, deburring, punching, and profiling. Machine weight: 2 tons. Gedpfx Ajz Dtmaoaxsuh If you have any questions or need further information, please do not hesitate to send us a message or call us.

Year of construction: 2019, condition: good (used), Venjakob RNV 2.0 Exhaust Gas Cleaning System This system incinerates gaseous pollutants and odors from the production exhaust air, releasing clean air into the environment. Extraction: Solvent-containing or odor-laden process air (e.g., from painting systems, the chemical industry, or printing plants) is fed into the system. Preheating: The contaminated air flows through internal ceramic heat storage units and is heated to a very high temperature. Gjdpfjzrl Ibjx Aaxouh Combustion (Oxidation): In the combustion chamber, the natural gas inlet (the pilot burner) ignites the air. At a temperature of up to 850 °C, the organic pollutants (VOCs) completely break down into harmless water vapor (H₂O) and carbon dioxide (CO₂). Energy Recovery: The cleaned, hot air then flows through a second ceramic bed and releases its heat there. The system "stores" the heat for the next batch of contaminated air. This makes the system extremely energy-efficient, as after the start-up phase, hardly any additional gas needs to be supplied. System Data Manufacturer: Venjakob Umwelttechnik Type: RNV 2.0 Year of Construction: 2019 Manufacturing Number: 15212 Throughput Volume: 2,000 Nm³/h Gas & Combustion Gas Type / Heating Value: Natural Gas H / 10.4 kWh/Nm³ Firing Heat Output Range: 30 kW Flow Pressure: 200 - 1,500 daPa Max. Combustion Chamber Temperature: 850 °C Electrical Connections Grid Connection: 400 / 230 V AC Connected Load: 24 kVA Current Consumption: 35 A "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More articles – new and used – can be found in our shop! International shipping costs upon request!

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) Guedpfx Aasv Si Szexeh 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 59 mm, roller (top) diameter: 59 mm, side roll diameter: 59 mm, overall weight: 420 kg, total length: 1,700 mm, total width: 400 mm, total height: 1,100 mm, input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1300 × 1.5 mm – Electric 3-Roll Sheet Metal Bending Machine Guodpfx Aasz Hx Eajxoh MACHINE IN STOCK – READY FOR IMMEDIATE DISPATCH Price: €2,080 net EXW European delivery available – transport quotation on request. The MTP ESR 1300 × 1.5 mm is a compact, electrically driven 3-roll sheet metal bending machine designed for rolling cylindrical parts, tubes, sleeves, rings and light conical components from sheet metal. The machine combines a rigid welded frame with hardened, high-quality steel rolls and simple mechanical adjustment. It is suitable for workshops, metal fabrication companies, maintenance departments and small/medium production facilities. MAIN TECHNICAL DATA • Working length: 1300 mm • Maximum sheet thickness: 1.5 mm • Roll diameter: 59 mm • Motor power: 0.75 kW • Dimensions: 1700 × 400 × 1100 mm • Weight: approx. 420 kg • System: 3 rolls • Drive: electric • Condition: brand new MACHINE FEATURES The machine uses a three-roll bending system with eccentric pressure adjustment. The upper and lower rolls are manufactured from high-grade hardened steel, providing good wear resistance and stable forming accuracy. The rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for basic cone rolling within its standard adjustment range. The photographs show a robust and straightforward mechanical construction with: • manual handwheel and lever adjustment, • electrically driven roll rotation, • front-mounted control panel, • emergency stop button, • foot pedal operation for convenient starting and reversing of the rolling process, • safety cord / perimeter emergency protection, • solid floor-standing frame, • accessible mechanical components for easy adjustment and maintenance. Foot control allows the operator to keep both hands free for positioning and guiding the sheet during forming, which is especially useful when working with larger panels. APPLICATIONS Suitable for producing: • cylindrical sheet-metal components, • pipes and sleeves, • rings, • curved panels, • light conical parts, • workshop and fabrication components. SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales support. We can assist with machine selection, rolling technology and correct working parameters for different materials. We provide warranty and post-warranty service and can organise professional transport throughout Poland and the whole of Europe. The machine is brand new, CE marked, covered by the manufacturer’s warranty and available immediately from stock. Please contact us for delivery costs, additional technical information, photos or a commercial quotation.

Year of construction: 2014, condition: good (used), Melag Melatherm 10 DT Thermo-disinfector The Melag MelaTherm 10 DT is a cleaning and disinfection unit (CDU) specifically designed for the automated processing of instruments in medical and dental practices. It integrates important functions such as active drying and media intake directly into the unit, saving space in the practice. Guedpfsyk Eugsx Aaxjh Dimensions: The unit measures approximately 59.8 x 81.8 x 67.8 cm (W x H x D) and can therefore fit under a standard 60 cm worktop. Capacity: The optimized processing chamber offers space for instrument sets for up to 45 patients per batch. Active drying: Reliably protects instruments against corrosion and recontamination through integrated external and internal drying. Integrated process media: Cleaner, neutralizer, and rinse aid are housed in a space-saving drawer directly in the unit. Manufacturer: Melag Type: Melatherm 10 DT Voltage: 230 V Year of manufacture: 2014 You can find more new and used items in our shop! International shipping costs available upon request!

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Walk-in temperature chamber for testing, trials, or production processes Temperature range: +40°C to +80°C with a control accuracy of +/- 1°C Air conditioning via recirculation air handling unit (approx. 3000 m³/h) and electric heating, approx. 6 kW External dimensions: 4800 x 3200 x 2430 (depth, width, height in mm) Internal dimensions: 4560 x 2960 x 2160 (depth, width, height in mm) Chamber area: approx. 13.5 m² Guedpfozpy Idjx Aaxsh Chamber volume: approx. 29.2 m³ Equipment: - Door with a width of 1200 mm and a height of 2000 mm, with a pre-installed ramp for convenient loading - Viewing window in the door - Floor elements made of 1.5 mm non-slip stainless steel tread plate, glued onto a 15 mm thick, water-resistant laminated pressure distribution plate. Slip resistance class R11. Permissible wheel load: 2500 N - High-quality insulation with 120 mm polyurethane high-temperature foam, U-value according to DIN EN 13165: 0.17 W/m²*K - Temperature-resistant LED ceiling lighting - Temperature-resistant cable duct on the right and left sides with a total of 6 230V sockets - Siemens S7-1200 control system and 7" color touch panel - Integrated PID control for temperature - Recording and graphical display of the temperature profile - Plain text display of fault messages and history tracking, as well as password protection - Potential-free switching contacts for alarm forwarding Electrical connection: AC400V / 3Ph/N/PE / 50 Hz The system can be inspected by arrangement. The buyer must dismantle and remove the system. As the operating location has been closed, no assistance with logistics can be provided.

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Gsdpfx Asz Snchjaxjuh Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Year of construction: 2000, operating hours: 104,382 h, condition: excellent (used), Vötsch Shock Test Chamber VT 7012 S2 System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. These cyclical stresses and the accelerated aging caused by temperature changes can reveal weaknesses in the test specimen. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving platform Load capacity of the moving platform: 50 kg for VT3 7012 S2 All-round grids in the moving platform secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The hot chamber can be used as a temperature storage device, and the cold chamber as a temperature change device Minimal energy consumption No compressed air required Manufacturer: Vötsch Type: VT 7012 S2 Type: Temperature shock test chamber Test chamber volume: 120 l Rated voltage: 400 V Rated power: 10 kW Rated current: 25 A Refrigerant: R452A Refrigerating unit: water-cooled Shock cooling optional (nitrogen cooling) via customer-side nitrogen supply External dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test chamber dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection class Device: IP 42 Control panel: IP20 Control cabinet: IP 54 Key figures for temperature tests in single-chamber operation | Temperature range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature deviation over time: +_ 2 K in the steady state Temperature deviation spatially: +_2K in the steady state in the moving platform Heating rate, hot chamber: 11 K/min Cooling rate, cold chamber: K/min Heating rate, cold chamber: 2 K/min Cooling rate, hot chamber: K/min Observation window: 355 x 355 mm Pipe passage: 67 mm Year of manufacture: 2000 Operating hours: 104382 Weight: 1000 kg Godsx Exmtopfx Aaxeuh You can find more new and used items in our shop! International shipping costs on request!

Condition: not inspected (used), functionality: unexamined, Industrial PC / Computer, Ferrocontrol FIPC 1.5 Taken from a crown-profile saw, Hüllhorst KLS 430 V. Gjdpfx Aaszkayvsxjuh Condition: untested.

Condition: used, functionality: unexamined, Used Netzsch thermal analyzer set consisting of a computer with components and software, analyzer (STA 409 EP), controller (TASC 414/3), and power supply (Pu 1.851.405). Gsdpfozv Sniox Aaxjuh Manufacturer: Netzsch Model: STA 409 EP | TASC 414/3 | Pu 1.851.405 Voltage: 230V (50/60Hz)

Condition: excellent (used), Year of construction: 2016, operating hours: 2,615 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,108 mm, KODAK Magnus VLF large-format thermal plate setter with MCU multi-cassette unit (four cassettes) New TH 7 laser (August 2022) with only 2615 laser hours Godsytawnspfx Aaxouh 2400 dpi Z-speed Total number of exposed printing plates: 395,443 pieces Minimum size: 483 x 394 mm Maximum size: 1600 x 2108 mm Material flow from left to right, Print Console enabled for all RIP software, Dell PowerEdge T330 server.

Condition: repair required (used), machine/vehicle number: 515054000261, Year of construction: 2003, load capacity: 1,500 kg, lifting height: 4,320 mm, free lift: 1,330 mm, fuel type: electric, battery voltage: 24 V, fork length: 1,000 mm, empty load weight: 2,221 kg, STILL RX50-15 electric three-wheel forklift for internal material handling, with a load capacity of 1,500 kg, a lifting height of 4,320 mm, and a STILL charger. IMPORTANT: BATTERY DEFECTIVE The 24V traction battery is defective or deeply discharged. The forklift is explicitly offered as requiring repair. Lifting and lowering under power cannot be demonstrated at this time. TECHNICAL DATA Manufacturer: STILL Model: RX50-15 Year of manufacture: 2003 Serial number: 515054000261 Load capacity: 1,500 kg according to the data plate Lifting height: 4,320 mm Free lift: 1,330 mm Fork length: 1,000 mm Unladen weight according to the data plate: 2,221 kg Drive power: 4.0 kW Battery voltage: 24 V; Battery type: PzS CONDITION AND MAINTENANCE In operation until June 2025, after which the battery failed. According to the latest condition report, the hydraulics and mast have no known functional defects; however, a current functional test is not possible due to the defective battery. Rear tires renewed in 2024; front wheels show signs of use. Oil and brake fluid were changed in 2024, according to the information provided; the driver's seat was replaced in 2021. DELIVERY AND COLLECTION Forklift including STILL charger, 24 V / 120 A. Location: 65618 Selters (Taunus), Germany. Inspection by appointment. On-site assistance is available for moving the forklift to the loading ramp and for loading. The buyer is responsible for organizing the transport. Gujdpfxjz Hcrko Aaxjh Price: 2,875 EUR net, negotiable, plus statutory VAT. Reference: RQ424391-10

Condition: good (used), Year of construction: 1998, Vötsch VT 7030 S2 Temperature Shock Test Chamber System for extreme temperature changes During temperature shock testing, the resistance of components, devices, and other products to rapid changes in ambient temperature is tested. The test specimens are subjected to rapid temperature changes in air with alternating upper and lower temperature loads. Based on these cyclical loads and accelerated aging caused by temperature changes, weaknesses in the test specimen can be identified. Vertical arrangement of the test chambers Ball screw drive for secure guidance of the moving carriage All-round grids in the moving carriage secure the test specimens High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber The warm chamber can be used as a temperature storage device, and the cold chamber can be used as a temperature cycling device Guedpfxewbdv Ss Aaxoh Touch panel for convenient operation of the simulation programs with graphical display Minimal energy consumption No compressed air required Data for temperature tests in single-chamber operation Warm chamber: Temperature shock test chamber, test chamber 300 l Temperature range +50 °C to +220 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially ± 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 11 K/min Cold chamber: Temperature shock test chamber, test chamber 300 l Temperature range -80 °C to +70 °C Temperature deviation over time in the center of the usable space ± 1 K Temperature deviation spatially 2 K Temperature gradient (according to IEC 60068-3-5) 4 K Temperature change rate (according to IEC 60068-3-5, measured in the supply air) Heating 1.5 K/min Cooling 4 K/min Technical data: Temperature shock test chamber Test chamber volume approx. 300 l Voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 30 kW Rated current: 50 A Refrigerant: R-404a / R-23 Refrigerating unit: Water-cooled Weight: approx. 940 kg Year of construction: 1998 Test chamber dimensions: Width 770 mm x Depth 650 mm x Height 610 mm Housing dimensions: Width 1200 mm x Depth 1800 mm x Height 2050 mm TS 05 You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 1999, Nema NCG 4390 S Temperature Shock Chamber -40°C to +180°C Manufacturer: Nema Type: NCG 4390 S Temperature Range: -40 °C to +180 °C Dew Point Range: +5 °C to +89 °C Supply Voltage: 400 V Rated Current: 32 A Rated Power: 15 kW Refrigerant: R 404 A Year of Manufacture: 1999 Weight: 2720 kg External Dimensions: W 3950 x D 1700 x H 2280 mm Internal Dimensions: W 3000 x D 1300 x H 1170 mm WLG STEAM-O-MAT Electrically-controlled automatic steam humidifier and generator for mineral- and odor-free steam Manufacturer: WLG STEAM-O-MAT Type: EDB 8 Heating Voltage: 400 V Power: 6 kW Steam Output: 8 kg/h Water-cooled Condenser Guedpfx Asuzgt Eoaxoh Manufacturer: Bitzer Water-cooled Supply Voltage: 400 V Rated Current: 13 A Rated Power: 4 kW Refrigerant: R 404 A Weight: 145 kg KK-08 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, mileage: 202,085 km, power: 49 kW (66.62 HP), first registration: 03/2015, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,700 mm, fuel: diesel, fuel tank capacity: 60 l, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro5, number of seats: 2, total length: 4,280 mm, total width: 1,830 mm, permissible axle load (axle 1): 1,080 kg, permissible axle load (axle 2): 1,070 kg, Year of construction: 2015, Equipment: ABS, Android Auto, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, power assisted steering, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Rear work lights - Front work lights - Heated mirrors - Heated exterior mirrors - Passenger airbag - Passenger seat Gsdpjz Rz Dzefx Aaxjuh - Third brake light - Electric front windows - Driver airbag - Remote central locking - Windshield - Enclosed cabin - Height-adjustable steering wheel - Cabin - Fog lights - Radio/CD player - Disc brakes - Side airbags - Side door - Automatic heating system - Two rear doors - Partition without window = Additional Information = General Information Number of doors: 5 License plate: VN-838-G Technical Information Number of cylinders: 4 Engine displacement: 1,461 cc Maximum front axle load: 1,080 kg Maximum rear axle load: 1,070 kg Weights Unladen weight: 1,255 kg Payload: 695 kg GVWR (Gross Vehicle Weight): 1,950 kg Maintenance APK (Technical Inspection): valid until 03/2027

Condition: excellent (used), The Freeman FUSING 48M is a professional machine designed for the thermal bonding of materials using temperature, pressure, and a conveyor belt. The device is used in the apparel, footwear, and leather industries, as well as in the production of laminated materials. The machine enables the durable bonding of interlinings, adhesive layers, and other reinforcing materials to fabrics and leather. Thanks to adjustable temperature, pressure, and belt speed, it allows for precise adjustment of operating parameters to suit the material being processed. Technical specifications: Manufacturer: Freeman Model: FUSING 48M Serial number: 9315 Power supply: 220 V 1 phase (1PH) Temperature control Pressure control Belt speed control Heated conveyor belt Pressure gauge Feeding and receiving table Steel construction Manufacturer: The Louis G. Freeman Co., USA Applications: Gjdpfxoz Sm S Uj Aaxsuh Bonding of interlinings and apparel linings Lamination of fabrics and technical materials Production of clothing and leather goods Bonding of materials using heat-activated adhesives Heat transfer and fixing of appliques

Condition: excellent (used), Year of construction: 2011, 348 USED Heuft thermal oil ovens. Year of manufacture (deck oven): 2009 Year of manufacture (rack oven): 2011 Gsdpfx Aezxp Dyjaxsuh EQUIPMENT: - 1 Heuft rack oven, model VTR 10.12.5.09, for 60x100 cm trays - 1 Heuft deck oven, model VT0 216 33, with a baking area of ​​15 m² (oven features temperature zoning for 3+3 decks) - HK 200 heating boiler - Trolleys for rack ovens The price is a net price. Pais options available: transport. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: used, mileage: 364,191 km, power: 70 kW (95.17 HP), first registration: 04/2017, fuel type: diesel, next inspection (TÜV): 08/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €4,900 (net) * Ford Transit Courier 1.5 TdCi 70 kW L1H1, air conditioning, camera, trailer hitch, Euro 6 * Seats: 2 * 5-speed transmission * Armrest * Radio/CD * Front airbags * Onboard computer * Hands-free system * Cruise control * Automatic climate control * Multifunction steering wheel * Fog lights * USB * Sliding door, right side * ABS * ESP * Rear-view camera * Heated seats * Trailer hitch * Wheelbase: 249 cm * Unladen weight: 1218 kg * Payload: 577 kg * Permissible total weight: 1795 kg * Truck registration * Vehicle no. 19 Timing belt replaced at: 348,000 km OPENING HOURS Monday - Friday from 9:00 a.m. to 5:00 p.m. (by appointment...) CONTACT INFORMATION Phone: WhatsApp Guedpfezwtyisx Aaxsh E-mail: Transit and customs license plates (export number) available from us. Subject to errors, typos, and prior sale. Technical specifications and features should be checked separately. The condition of the vehicle as per the contract is only that which is inspected on-site at the time of purchase and confirmed in writing. Please arrange an appointment.

Condition: used, This listing is for a Thermo Scientific Heraguard ECO 1.5 Laminar Flow Clean Bench Guedjzugdiepfx Aaxsh The unit is in full working condition and ready for immediate use This laminar flow clean bench is a high-quality lab instrument manufactured by Thermo Scientific (Model: ECO 1.5). Provides a highly efficient HEPA-filtered workspace designed to protect sensitive samples and materials from airborne contamination during routine laboratory procedures. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: as good as new (ex-display), Year of construction: 2024, 1-meter manual rolling mill with 3 rollers, featuring a disengageable roller. Robust cast iron structure. Rolling capacity: 1020 x 1.5 mm in mild steel. High-strength steel rollers. Professional roller with 3 asymmetric rollers. Retractable top roller at the front for easy removal of the rolled piece. Bottom roller adjustment via handwheel and eccentric. Rear roller height adjustment via handwheel, with the option to tilt the roller for conical forming. The bottom and rear rollers are equipped with various grooves for winding mechanical wires or small components. Gjdpfxez Dugzo Aaxsuh Gear transmission.

Condition: used, This listing is for a Clearmark ICE Viper plus Thermal Inkjet Coder with Stainless Steel Conveyor Gjdpfx Aoxzg Hwoaxjuh

Condition: used, mileage: 251,863 km, power: 96 kW (130.52 HP), first registration: 01/2019, axle configuration: 4x2, color: other, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, = Additional Options and Accessories = - CD player - AC power = Notes = Car-Pass URL: Car-Pass ID: 173e0803-1d92-4143-9742-4e1bca0509b4 = Additional Information = Gujdpfxjzxl Eys Aaxoh Front axle: Steered Rear axle: Dual tires Unladen weight: 1,505 kg Payload: 705 kg GVWR: 2,210 kg Damage: None

Condition: excellent (used), Year of construction: 2006, operating hours: 1,296 h, functionality: fully functional, plate width: 1,600 mm, plate length: 2,108 mm, KODAK Magnus VLF large-format thermal plate setter with MCU multi-cassette unit (four cassettes) New TH 7 laser (May 2023) with only 1296 laser hours Guodpsyta N Dofx Aaxjh 2400 dpi Z-speed Total number of plates exposed: 258,861 Minimum size: 483 x 394 mm Maximum size: 1600 x 2108 mm Material flow from right to left with Prinergy EVO 3 workflow, including dongle, Printconsole 5.1, and Dell PowerEdge 7330.