Used Raster Hr40 for sale (44)

Condition: used, Year of construction: 1982, machine/vehicle number: 105981, Press capacity: 45 ton Ram stroke adjustable: 20 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 300 mm Free frontal opening L-R: 710 mm Table surface area : 700 x 450 mm Slide area: 700 x 360 mm Njdeuqc Ngjpfx Ahfslf Hole in table: 600 x 100 mm Number of strokes: 80 - 400 s.p.m. Required power: 10 kW Height over floor approx.: 2900 mm Weight of machine approx.: 7,2 ton Control: Siemens S7 Standard configuration With gripper feedMachine was completely overhauled in 2001 with SIEMENS S7 control.

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Njdpfx Ahsrrh T Aofjlf Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, empty load weight: 8,000 kg, maximum load weight: 22,000 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 01/2022, loading space length: 13,580 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, loading space volume: 94 m³, total length: 13,580 mm, suspension: air, tire size: 265/70 19,5, tire condition: 50 %, wheelbase: 9,010 mm, color: white, Year of construction: 2022, front tire size: 265/70 19,5, rear tire size: 265/70 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, tail-lift, truck registration, Reference no. for inquiries: 40852 Talson, Box body * Year of manufacture: 2022 * ABS, Anti-lock Braking System * EBS, electronic braking system * Tail lift * Air suspension * Fixed roof * Load securing certificate DIN EN 12642 Code XL * Furniture configuration * Complete double-deck, incl. support beams * Steerable axle * Forced steering axle * Air connection, coupling head (red + yellow) * Spare tire holder * 2x7-pin connector Nljdjyicxkjpfx Ahfof * 15-pin connector * Lifting and lowering device * Ferry lashings * Storage box / toolbox * Suspension: Air * Gross vehicle weight: 30,000 kg * Tare weight: 8,000 kg * Payload: 22,000 kg * Permissible total weight: 30,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 40%|40% -- 40%|40% - Tire size: 265/70 R19.5 * Tire condition 2nd axle: 50%|50% -- 50%|50% - Tire size: 265/70 R19.5 * Tire condition spare tire: 50% * Wheelbase: 9010 mm * Tire sizes: 265/70 R19.5 * Interior dimensions: L=13580 mm, W=2480 mm, H=2800 mm * Interior volume*: 94 m² * Pallet spaces: 33 * Flexible, adjustable double deck with raster profile * Hardwood floor * Insulated roof * Interior lighting for the box body * Tail lift: Dhollandia 2000kg, folding * Tridec steering on the last axle Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists; we will be happy to advise you.

Condition: used, Year of construction: 1981, machine/vehicle number: 104680, Press capacity: 45 ton Ram stroke adjustable: 10 - 40 mm Slide adjustment: 50 mm Nljdpfx Ahjuqcwdjfjf Shut height (stroke down, adjustment up): 220 - 300 mm Free frontal opening L-R: 560 mm Table surface area : 550 x 450 mm Slide area: 550 x 360 mm Hole in table: 450 x 100 mm Number of strokes: 100 - 500 s.p.m. Required power: 7,5 kW Weight of machine approx.: 6,2 ton

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, • Used device with upgraded cathode systems o LAB6 cathode o Tungsten cathode • EDX (Energy Dispersive X-ray Spectroscopy) allowing direct chemical analysis in the SEM • Lens-mounted 5-channel BSD Nedpfxsy Ep S Rs Ahfjlf • Infrared camera mounted on the chamber door • Maintenance by manufacturer (Zeiss and Oxford Instruments) until 2024 • 2x 19” flat screen monitors • Joystick controller for stage movement • Ergonomically designed control console • Software module for automatic centering of any image detail • Stage base plate, motorized X+Y axes • Stage assembly includes tilt, rotation, and Z-axis; removable Accessories • Transport lock and transport castors • 2x Wehnelt + anode + 3 tungsten filaments • Table spacers (3 pieces, different heights) + tools • 1x 9-position sample holder for rods o Collimator shorts 150 o Collimator long etc. 150 o Collimator long 50/80 mm² MK2 • 1x fixed aperture holder • 2x 100 μ VP – aperture • 1x 750 μ VP – aperture • 2x 20 μ aperture • 1x 30 μ aperture • 1x 100 μ aperture • Various tools (tool kit) and sealing rings • 1x Lens-mounted 5-channel BSD (1 EVO BSD DIODE 5 CH Standard, low light sensitivity. With signs of use, possibly for replacement) AZtec Adv Rec. 3.2 + Update 2024

Condition: used, Year of construction: 2004, Technical details: lifting capacity: 1,5 t fork length: 1000 mm useable height: 1290 mm weight of the machine approx.: 150 kg dimensions L x W x H: ca. 1,2 x B: 0,95 x H: 1,7 m Nlodpfxevvrype Ahfjf This is a crane fork/loading fork with 2x handrail Description: 2x crane fork: -variable tine width adjustable max. 880mm (via 6x spacing grid per crane fork) Fork holder: -height 1290mm x width 900mm -Grid per side 6x Ø 20mm Crane mount: -Height 1290mm x width 900mm -Angle position 20° -Oval crane eye Ø 80 x 100mm -Height adjustment (locking via raster bolt Ø 22mm) *

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Equipment and technical data: - Solid German machine construction - Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor - Travel device for greater mobility - Cast iron table 700 x 380 mm thick-walled and highly ribbed - 2 manual eccentric clamps with solid steel columns for clamping the workpieces - Smooth-running cross support with adjustable ball guides for lateral and depth adjustment - 2-lever operation - Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via left and right side stops - Drill motor power 1.3/1.7 kW, pole-changing, speed 1500/3000 rpm with mechanical motor brake and practical tool tray - incl. emergency stop button - High-precision two-jaw drill chuck with protective sleeve, clamping range 1-20 mm - Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller high-precision milled raster, fixed via spring-loaded raster bolt - Plug-in frame stop with index bolt for the positions: center, left, right Mitre fence, plug-in with index bolt for 45° and 22.5° - Workpiece fence up to 1500 mm for series processing - CE-compliant, GS tested - Max. Drilling depth 145 mm - Max. Drilling length 240 mm - Height adjustment 135 mm - Clamping range 5-20 mm - Motor power 1.3 / 1.7 kW - Voltage 400 V / 50 Hz - Suction nozzle 100 mm Ø - Color RAL 7035 light grey and RAL 5000 violet blue Special equipment: - Dial gauge in the handwheel, with 0.1 mm height adjustment display instead of the scale - Single-lever operation with remote locking for longitudinal and transverse movement of the drill motor including loosening and locking of the raster bolt on the dowel drilling device, narrow workpieces can then also be processed from the side of the table - Emergency stop button with key - Safety cover over the drill chuck with electric lock Nodpfx Aew I Uzkshfslf New price with this equipment 12213. Shipping dimensions: 120x80x160 cm Weight: approx. 200 kg Availability: short term Storage location: Hochheim

Condition: ready for operation (used), Year of construction: 2021, operating hours: 100 h, total height: 1,664 mm, total width: 750 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 200 mm, overall weight: 260 kg, table load: 20 kg, product length (max.): 737 mm, This 3-axis Werth Scopecheck 300S was manufactured in 2021. It features a measuring range of 300 mm x 200 mm x 200 mm and a resolution of 0.1 µm. The machine includes a multisensor concept with optical, scanning multi-probe, and laser sensor capabilities. If you are looking to get high-quality measurement capabilities, consider the Werth Scopecheck 300S CMM machine we have for sale. Contact us for further details. - Table Load: 20 kg max (8 kg for specified accuracy)- Resolution: 0.1 µm- Sensors: Multisensor concept (Optical, Scanning multi-probe, Laser Sensor Probe WLP)- Accuracy:- MPE E1: (1.8 + L/120) µm (with 3D geometry correction)- MPE E2: (2.0 + L/100) µm- MPE E3: (3.9 + L/75) µm- Operating Voltage: 115-230V AC ±10%- Power Consumption: approx. 400 VA- Software: WinWerth 3D with 3D CAD Bundle, Bestfit Light, Raster Scanning, and Online Statistics- Included Components: PC system, 2 monitors, parking station, and flexible change system- Features a Renishaw SP25M active scanning probe with an SM25-5 probe module > allows for the highly accurate capture of freeform surfaces and contours > suitable for both scanning and measuring individual points Nodpoy Sgnrofx Ahfelf

Condition: good (used), Year of construction: 2006, I sell the 3-axis CNC working centre Biesse Rover A 3.30 with beam table, year 2006. Configuration: 3-axis main spindle HSD Tool magazine 14 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 3130x1250mm. Nodpfszmnzmex Ahfolf 2 working fields, 4 clamping areas Automatic central system of lubrication. Uniclamp System included Total power 17kW Biesse Works software controller with full instructions. Pump Becker 110 m3/h. 2,4KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: like new (used), 3 working axes working area X-2100mm, Y-3100mm maximum power consumption 14kW maximum spindle speed 24,000 rpm spindle mount ISO 30 Nlodpfxjx Ng E Se Ahfjf air pressure 8 bar vacuum raster table, Becker pump 5.5 kW year of manufacture 2014 total power 17 kW total weight 3100 kg

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. Nodpeff Huwjfx Ahfslf • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Njdpeh Txlcofx Ahfslf Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Working area: 2700 x 1250 mm Z-axis travel: 160 mm Rotary axis: C-axis Spindle motor power: 8.5 kW Spindle speed: 24,000 rpm Tool changer (carousel): 8 tools (auxiliary magazine) Main tool magazine: 10 tools Saw unit along X and Y axes Vertical drills along X-axis: 8 pcs Vertical drills along Y-axis: 5 pcs Horizontal drills along X-axis: 4 pcs Horizontal drills along Y-axis: 4 pcs Tool holder type: HSK 63 Central lubrication pump Vacuum raster table Edge milling unit along X-axis Nledpfjwp R Eisx Ahfef Year of manufacture: 2011

Condition: new, Year of construction: 2026, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Nodpfx Ajr Eli Tshfjlf Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, The CNC 2030 SPECIAL milling plotter is a high-precision machine built in Poland, used for machining many engineering materials, i.e.: wood, wood-based (chipboard, MDF, OSB, etc.), plastics (Plexiglas, PVC, HPL, etc.), composites (dibond, carbon, alucobond), soft metals, etc. CONSTRUCTION: The plotter is made entirely of high quality steel. During the manufacturing process, all components undergo a special heat treatment. Nlodpfxsirmgfe Ahfjf WORKING SURFACE: The working area of our machine tool is 2100 x 3100 [mm]. It is possible to manufacture the machine with a different working area. Z-AXIS RANGE AND GANTRY CLEARANCE: The Z-axis range is 200 mm as standard. However, it is possible to increase it to 400 mm. DRIVES: High-resolution, high-power digital motors have been used to drive our machine tools, ensuring adequate acceleration and speed in each direction. The X and Y axes use classic and well-proven helical slats, which ensure long service life and precision, and a high-performance ball screw is used to drive the Z axis. SPRING: A powerful, liquid-cooled and durable high-end brushless spindle is used to drive the cutting tool. The spindle bearings are high-quality machine bearings, which are very quiet and guarantee above-average durability. The spindle speed ranges from 6 to 24,000 rpm. SOFTWARE: The machine has been provided with suitable, easy-to-use CAD/CAM software in the latest version. CONTROL: This is done by means of a controller, which has its own processor and operating memory to ensure stable and reliable operation. The controller has a function to return to further operation after power loss so there is no need to initialise the program from scratch. VACUUM TABLE: The table is made with raster technology, thanks to the sections used we can separate any part of the table with a seal. This allows us to adapt the working area to the specific workpiece. A well-chosen vacuum pump according to the size of the table will guarantee uniform suction of the material to the table. 6-POSITION LINEAR TOOL MAGAZINE: The linear magazine enables an automatic machining process. It is used for multi-tool machining. In addition, it allows for faster and more efficient work and contributes to the elimination of operator errors. The standard magazine on our machines is for 6 positions. It can be extended to 16 positions. Oscillating knife The oscillating knife is a state-of-the-art head fitted to CNC machines, designed for cutting low-density materials. The blade moves up and down and thus 'slices' the material. This makes it possible to cut thick, soft materials - FOAM foam, magnetic foils, corrugated cardboard, textiles.

Condition: like new (used), 4,000 m² Nedcon storage mezzanine Column grid: 800 cm x 600 cm! Used, top condition, like new, see pictures. Height to top edge of the mezzanine: 370 cm Load capacity: 500 kg/m² Various flooring options available. Sufficient number of lifting platforms, stairs, railings, and accessories available. CAD planning and assembly possible. Partial sale possible. Negotiable price: upon request! Goods are in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking for sale? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage mezzanines & steel structure mezzanines immediately available • Weekly 30-50 semi-trailer truckloads of goods for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly, and assembly. 🏭 TOP BRANDS, USED & FROM INSOLVENCY/BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND AREA OF FOCUS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a complete, all-inclusive package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory, including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Nedpfx Ajhzxagjhfslf Our full-service, provided by our own employees: cataloging, office preparation, inspection, goods delivery, logistics, dismantling, and complete clearance. Whether you found us through our heavy-duty racking or are looking for heavy-duty racking, galvanized / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: like new (used), 1,500 m² Nedcon storage platform Column grid: 800 cm x 600 cm! Used, in top condition, like new, see pictures. Platform top edge height: 370 cm. Load capacity: 500 kg/m². Various flooring options available. Sufficient number of goods lifts, stairs, railings, and accessories available. CAD planning and installation possible. Partial sale possible. Negotiable price: upon request! Goods are in stock. Transport and installation possible upon request. Inspection possible at any time by appointment. Further information upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our general terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top used and new storage technology & heavy-duty racking Description: Nljdpfxehzxbps Ahfef Are you looking for high-quality storage racking for sale? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer trucks of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving racking, tire racking, or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling, and installation. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Jungheinrich heavy-duty racking) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a real all-round package: 1. Lump sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission auction: Carrying out auctions on commission. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling, and complete clearance. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Manufacturer: Trane Type: CRHR400 G2HBO Nlodpfxou Eb Aio Ahfsf Type: Compressor Technical Specifications: Flow rate: 145.3 m³/h Discharge pressure: 28 bar Speed: 1450 rpm Voltage: 380/415 V 3PH 100/92 A 50 Hz Replacement price: €11,043 Condition: New

Condition: new, Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Nledpex H Uctsfx Ahfsf Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg