4.000 m² warehouse platform Nedcon

4.000 m² Lagerbühne Nedcon Säulenraster 800 cm x 600 cm!

Condition: new, Year of construction: 2026, Automatic snap lock roof panel machine Sl-1 auto is designed by our company for the self-locking roof panels production in automatic mode. This machine forms a roof lock by rolling with the help of special rolling rolls. At the same time while rolling it cuts fastening holes for roof panel’s fixation. Automatic snap lock roof panel machine SL-1 auto consist of: - Roll forming part, which directly forms the desired profile of the panel with the help of rolling rollers. The machine is equipped with width easy adjustable system - to change the width; you just need to turn a special adjustment wheel. The rolling machine has 10 pairs of forming rolls to form a click-seam lock. It has special tool to cut fastening holes in panels. - Automatization system of machine, with the main elements as follows: automatic control panel, manual control panel, control cabinet, measuring wheel. With the help of this system, machine operator can program it to perform metal rolling and cutting operations in automatic mode. It is easy to set the number of panels for rolling and their lengths, so you just need to feed metal into machine, and it will roll panels of click-seam of the desired length and quantity in automatic mode. It is possible to perform several tasks (multi-tasking). If use manual control panel you can check each operation step of the automatic mode before put it to full automatic process. - Guillotine shear, designed for cutting click panels of various widths. The special configuration of blades makes it possible to cut such profile and to get high quality final product. Shear system has electric motor to make cutting operations easy. Fgodpfx Amsn Hqmmjbod As an additional equipment for the machine, we offer: - metal uncoiler for convenient installation of roll metal and feeding it into the machine. - full automatic decoiler to make roll forming process maximum automatic. - ribbed panel rolls, to form additional ribs to the click-fold panels, so it gets more interesting look to the roof and increasing the rigidity of the system. - ribbed panel forming machine RPFM (microwave panels machine) to form microwaves on roofing panels. Due to its low weight, the automatic roll forming machine for self-locking panels SL-1 auto can be used in the construction of civil and industrial facilities, in factory workshops and workshops, as well as directly on the roofing site. Using of machine close to the place of installation avoids transportation costs and the associated risk of damage to the roofing sheets. The high of snap lock roof panel profile when installed is 26mm: As an option, we can also make machine for 31mm lock high production: The maximum workpiece width for rolling can be 700mm. The minimum workpiece width is 250mm. Automatic snap lock roof panel machine Sl-1 auto has special protective cover that prevents foreign objects from getting to working part of machine. So snap lock automatic roll forming machine SL-1 auto is convenient to use with the help of automatic mode so you can minimize operator’s work and to get high-quality roofing panels with high productivity.

Condition: new, Welding turntables increase work flexibility, productivity, and quality. They also assist the welder during the work process, thus guaranteeing a safe working environment and improved work ergonomics. The main advantage of PEMA turntables is that the workpieces can always be positioned in the optimal welding position. This can increase welding productivity by up to 70%. For 50 years, we have been designing and manufacturing welding turntables for demanding and heavy workpieces, providing productive and high-quality welding solutions for half a century. Pemamek’s welding turntables are a combination of modern design and reliable, efficient technology, and can be easily integrated into any other PEMA solution. Fgjdjg Urz Hjpfx Ambod Each of our welding turntables is designed internally and manufactured with high-quality components. We are the PEMA representative for southern Germany. We still have some of the older generation APS tilting-rotating tables in stock. The new generation APSI tables are already in stock.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2015020890, For sale is a magnetic filter system with integrated cleaning system. Filter systems of this type are usually made individually to order from customers. In this system, there is an exhibition purpose, which only served to show, and was hardly in use. product benefits Installation possible into existing production lines Separation of any ferrous metal contaminants Very corrosion resistant High wear resistance Compact design Low maintenance Technical details Fgedpecwghbjfx Ambjd - 400 x 400 x 390 mm - Inlet 260x260mm - Inlet 260x260mm - 8 pcs magnetic filter rods

Condition: new, diameter 150 mm workpiece length 1300 mm work piece width 800 mm max. dia. of grinding wheel 150 mm turning speed range 0 - 2830 U/min work height max. 945 mm milling-head swivable +/- 180° engine output 1.5 kW weight of the machine ca. 230 kg. dimensions of the machine ca. 1435 x 1100 x 1510 mm The "Easy T" is the cost-effective alternative to the conventional ones grinding and deburring machines. His head consisting of a grinding wheel Fgedpfsxab Hpsx Ambed and a flap brush, can be swiveled by 180°. Thus, a faster Switching between the aggregates possible. Due to the weight-bearing arm the head can be easily moved over the workpiece. The result is one even edge rounding. The pad also prevents slipping of the smallest components. Furnishing : - Deburring and rounding of laser-cut or stamped sheet metal parts - Grinding head, consisting of a grinding wheel & a flap brush, can be swiveled by 180° - Working area 800 x 1300 mm - Weighted arm for easy pivoting - non-slip table pad - Ergonomic operation of the machine with the help of push buttons "On/Off" - Grinding head with infinitely variable speed via frequency converter - Handle for ergonomic handling

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood Fgodpfxsv Si Szs Ambsd The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2025, We are a production company that is constantly developing dynamically thanks to the professionalism and commitment of our employees. Thanks to the experience we have gained, we are able to offer the best and highest quality solutions in the field of production. The folding bench ZGR - 4140 mm 0.8 mm incl. Roller shears and hand folding machine - Working length: 4140 mm - bending capacity: up to 0.8 mm (sheet steel) - Bending angle: max. 150 degrees - Folding beam thickness: 30 mm - Upper beam stroke: 80 mm - Weight: approx. 1000 kg - Lifting the top beam in three positions Furnishing: - Roller shear 0.8 + 350 Euro - Degree scale - Angle stop - rear frame to hold the sheet Fsdpoch Tkvofx Ambsgd - hand folding machine Price: 6 550 euros Please contact us if you are interested.

Year of construction: 2010, condition: good (used), 2250mm pallet nailing line Semi-automatic nailing table Turner + (optional marker) Fodopy H Erepfx Ambjgd Stacker (3000mm maximum) Transfer

Condition: excellent (used), Year of construction: 2011, *The video is just an example of how this cell can be prepared. Fgodpfx Amjg Saqvsbod Grinding cell with Kuka KR 180 grinding robot Berger grinding cell 2012 (external grinding A1) - Total weight approx. 6300 kg - Cell dimensions: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of manufacture 2011 - KRC 4 controller - Additional axis (7th axis) BSS10 belt grinding station - Max. belt dimensions 3500 x 30 mm - Max. contact wheel diameter 200 mm - Motor power 4 kW 2 x polishing stations - Polishing wheel diameter 350 - 600 mm - Power 5.5 kW Tool changer cabinet Interoll Automation GmbH belt conveyor - Total length approx. 2000 mm - Belt width approx. 440 mm We have 4 such cells.

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 9 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. Fsdpfsf Ekngox Ambogd • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Model: A550 Length: 9 m Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, PRIBO PATERNOSTER STACKER OFFER INCLUDES 1. PROBO OUTFEED CONVEYOR WITH RIGHT ANGLE TRANSFER CONVEYOR. 2. PRIBO Q1020 PATERNOSTER STACKER. 4. 2X AUTOMATIC STICK MAGAZINES 1200MM. MINIMUM LENGTH APPROXIMATELY 1900MM. MAXIMUM LENGTH 4500MM. PACK WIDTH 1200MM Fodpfxjy Hb Upo Ambsgd PACK HEIGHT 1200MM MAX. CAPACITY 5 LAYERS PER MINUTE SUITABLE FOR STACKING AFTER MOULDER, TRIMMERS, RESAW, DET, ETC.